Universal Image with IP Base IOS

Hi ,
Does Universal Image with IP Base IOS support the following,
1. OSPF
2. Multicast ( PIM SM, BSR, RP(static / dynamic) configurations)

Hi,
If you need full OSPF and Multicast support, you need IP services license.
See figure-2 in this link:
http://www.cisco.com/c/en/us/products/collateral/switches/catalyst-3560-x-series-switches/white_paper_c11-579326.html
HTH

Similar Messages

Image with /without payload encryption

Hi all,
Can you tell me when I should go for IOS image with payload encyrption and without payload encryption and what are the basic differences?
Thanks in advance,
Ram

Here is more information on IOS image with/without "payload encryption" for your reference:
http://www.cisco.com/en/US/prod/collateral/iosswrel/ps8802/ps5460/product_bulletin_c25-566278_ps10537_Products_Bulletin.html
1. Universal images with the "universalk9" designation in the image name: This universal image offers all the Cisco IOS features including strong payload cryptography features such as IPSec VPN, SSL VPN, and Secure Unified Communications.
2. Universal images with the universalk9_npe" designation in the image name: The strong enforcement of encryption capabilities provided by Cisco Software Activation satisfies requirements for the export of encryption capabilities. However, some countries have import requirements that require that the platform does not support any strong crypto functionality such as payload cryptography. To satisfy the import requirements of those countries, the `npe' universal image does not support any strong payload encryption. This image supports security features like Zone-Based Firewall, Intrusion Prevention through SECNPE-K9 license.

Animated Gif with large base image & small animated part.

Hello guys
I'm not really sure how to explain that, due to my limited English comprehansion. I will try with images.
I can easily create animated gif out of multiple layers, given each layer is identical, with small changes accuring over time.
But I yet to figure out an animated gif, that uses one large image for the base, and only small part of it is animated.
I always get the animated part working, without the large base applying across all the frames. All it does, is flashes once
the frame is reached and then moves on to being transparent, showing only the small animated part.
For example, this is a GIF made with Galaxy S4, of my friend playing with his phone, imported into PS CS6. On the Galaxy,
after I record the GIF, I can use my finder to touch, mask and freez parts I don't want to move, and leave only small, animated bit.
When I import it to PS, it shows one layer with full image, and bunch of frames with the animation part only.
http://i.imgur.com/UAiopQA.jpg
http://i.imgur.com/7XOGGV6.jpg
Problem is, once the image is open with PS, I'm not able to export it to keep it working in the same manner. Given the Samsung's
gifs are 8 to 10mb, it's hard to edit it, to make it more size friendly.
The gif clearly works the way I describe, so there is a setting or method I don't know about.
If PS is not best tool for editing GIF, what other apps would you recommand I use for it?
Thank you for the taking the time to read
best regards
Monica

This has been an ongoing issue for me since I switched from Powerpoint to Keynote. Most of the animated gifs with transparent backgrounds that I used with Powerpoint are no longer transparent in Keynote. You may want to search for those earlier threads on this topic...
To summarize: I've had to open up my animated gifs in After Effects and use the Color Key effect to restore transparency, with mixed success.
Good luck!

Is there any downside mixing Objective-C with C++ for iOS apps?

I'd like to use C++ since it's fast and more dynamically in memory reference.
Is there any downside mixing Objective-C with C++ for iOS apps?
When googled for info, I only found tutorials about how to let xcode compile Objective-C with C++.
Thanks for help.

hokanst wrote:
Both Objective-C and C++ are (more or less) extensions of C.
C supports manipulation of pointers and casting of pointers, this implies that both Objective-C and C++ will be able to manipulate C data like arrays, structs ...
Objective-C has classes like NSData to read/write blocks of bytes from/to file and to access ranges of bytes when the data is loaded into memory.
C++ probably has similar classes (I'm not well versed in C++ so I don't know).
If you want to look into using C++ you will probably want to look at Objective-C++, the link below has links to docs on how to use C++ with Objective-C:
http://stackoverflow.com/questions/3684112/what-is-objective-c
Thanks for the info, NSData does what I need.
A replied in the link also mentioned that he's using C++ in his application too. As long as I'm aware of memory management (prevent memory leaks, etc) as @disguise said, it should be fine.
@etresoft indeed, but C is the base language of ObjC, there are ways to deal with.

Changing images with c#

Hi,
I am making a slotmachine. I have everything but only need an animation for changing the images. This is what i got(only the code for the animation). I can change 2 images but don't know how to do it with multiple images like 5.
using System;
using System.Collections.Generic;
using System.ComponentModel;
using System.Data;
using System.Drawing;
using System.Linq;
using System.Text;
using System.Threading.Tasks;
using System.Windows.Forms;
namespace animatie
    public partial class Form1 : Form
        public Form1()
            InitializeComponent();
            Timer t = new Timer();
            t.Interval = 100;
            t.Tick += new EventHandler(t_Tick);
            t.Start();
        bool one;
        void t_Tick(object sender, EventArgs e)
            Image img;
            if (one) img = imageList1.Images[0];
            else img = imageList1.Images[1];
            one = !one;
            pictureBox1.Image = img;

Since it seems like you have it working for 2 images then expanding it to any # of images is straightforward. It looks like you're trying to animate the spinning wheel on the slot machine so that is the basis I'm working against. I'm also assuming
you want to stick with the image list but there are other approaches as well.
Firstly make sure your images are all in the image list. Next I would recommend that you move the timer start logic out of your constructor. You don't want it running when the form is created because it hasn't even been displayed yet. If you
want the spinning to start as soon as the form is displayed then override the OnLoad and start the timer at that point. I would recommend that you move this functionality into a separate method because you'll probably want to be able to spin the wheels
by clicking a button as well.
Since you're using an image list you'll need to keep track of the "current" image. To do that a simple image index field should be fine. Each time the timer fires you increment the index by 1. If it gets to the end of the list
(>= count) then reset it to 0. Then set the PictureBox image to the image at that index. This gives you the wrapping logic you want. It won't give you a smooth transition image though, each image will basically just pop up.
If you want a smooth transition then you might need to look at using a single image with images on it and the timer is simply having the window viewport move "down" the image in a scrolling fashion. When it gets to the bottom it loops back
around. For that kind of implementation a PictureBox is probably not a good idea, you'll want to use a simple custom control that handles its own painting instead.
Since you'll need to do this 3 times (one for each window) you might consider moving the logic into a custom control that represents a single window, the timer logic, image selection and image list. You can then use 3 instances on your form to emulate
the slot machine. Note that you'll want to add some randomness to the spinning because if each window spins at the same speed you'll always get the same behavior. Therefore you should probably have each window randomly decide how long and how fast
to spin to introduce randomness to the spinning.
Michael Taylor
http://blogs.msmvps.com/p3net

I want to add image in column is it possible then how to add image in data base what data type we need to do

I want to add image in column is it possible then how to add image in data base what data type we need to give we required any casting please show me one example
jitendra

Hi again,
Several points that can help more:
1. If you are working with Dot.Net, then I highly recommend read the first link that you got! This is nice and simple coding. Another option is this link which is even better in my opinion:
http://www.dotnetgallery.com/kb/resource21-How-to-store-and-retrieve-images-from-SQL-server-database-using-aspnet.aspx
2. As i mention above both link use the column's type image. There are several other option of working with Files. In most of my applications architecture I find that it is better to use a column which let us use any type of file and not an image column.
In choosing the right column's type for your needs basically your fist question should be if if you want to store your data inside relational database environment or outside relational environment. It is a good idea to look for blogs on this issue. Next
if you chose to store your data inside then you need to chose the right column type according to your server version. I highly recommend to look for blogs on the differences between those column's types: IMAGE,
Check those links:
To BLOB or Not To BLOB: Large Object Storage in a Database or a Filesystem
http://research.microsoft.com/apps/pubs/default.aspx?id=64525
FILESTREAM feature of SQL Server 2008
http://msdn.microsoft.com/library/hh461480
FileTables feature of SQL Server 2012
http://technet.microsoft.com/en-us/library/ff929144.aspx
Compare Options for Storing Blobs (SQL Server)
http://technet.microsoft.com/en-us/library/hh403405.aspx
Binary Large Object (Blob) Data (SQL Server)
http://technet.microsoft.com/en-us/library/bb895234.aspx
Managing BLOBs using SQL Server FileStream via EF and WCF streaming
* Very nice tutorial!
http://petermeinl.wordpress.com/2012/02/20/managing-blobs-using-sql-server-filestream-via-ef-and-wcf-streaming/
[Personal Site] [Blog] [Facebook]

Windows 7 Imaging with ZCM Agent installed

Has anyone successfully made a Windows 7 image with the ZCM agent already installed on the base image?
I am trying to get the unattended setup to login once to but the workstation prompts for the ZCM login information?
Any suggestions?

Yes
You have to disable the zcm logon prompt, then run a reghack to enable zcm logon as your last step after the first auto logon.

Exit a comparison with focus on image with green border?

If I am comparing images and decide I want to exit the comparison, I command-click the image with the green border, but the focus then goes to whichever photo has the thick white border. Is there anyway to exit the comparison and still have the focus on the one with the green border?

I don't know if this was always the case, but after the upgrade to Aperture 2.1.1, I am now able to exit with focus on the base (green border) image by pressing option-return.

Problem while loading Image from datat base

i have sotred iamge as blob in data base while reading from data base and loading i am getting error if image is more than 30 kb
when i pass bytearrayinputstream to ImageIo.read(bytearrayinputstream ) but problem is not occure if iamge is less thatn 30 kb (approx) why is it so how to store image is data base and read from the data base
i want both buffered image as well as SWT Image

{color:#000080}I tried to read your post but it is throwing a NoPunctuationException.
Would you care to repost with a few commas and full stops to make it readable?
db{color}

Compress image in keynote for iOS

how do i compress image in keynote for iOS? anyone has any idea?
i have added a few image taken from my new iPad and the keynote became such large file size that iCloud takes ages to upload. Hence i am looking for ways to compress each image in every slide to a lower resolution so as i could email my keynote to my colleagues too.
Anyone knows the how to or workaround?

I think I just found out what is wrong with the file sizes of KeyNote for iOS. In the Mac version of this app, there is a preference setting called "Copy theme images into document" which if checked includes about 7 MB of images for every theme used in the presentation(!). Normally this setting is kept off (thank god). However, in the iOS version of KeyNote, there is no such setting. Instead, that function is always ON(!!!). This means that every time you create a presentation in there, or edit one from the Mac version, it will grow by N times 7 MB, where N is the number of themes used in your presentation. Now, if you store your presentations on iCloud — like a good user should — then every single file will be sure to explode in size. And consequently take forever to upload and download from the cloud :-(
Any solution, anybody?

Deploy Images with SCCM Client Installed

Hi everyone.
there's one thing I have in mind for a while and haven't got a solution for it
We use SCCM 2012 to build and create our master image with a Task Sequence
one task before the syspreping is "prepare configuration manager client", which from my understanding and from technet - resets all the client's unique configuration.
conclusion - the SCCM Client is installed and "Syspreped" on our base image
in that case, assuming we still use the same SCCM client version, is there a way to save time during the Deploy task sequence?
the "Setup windows and ConfigMgr" step is required and it installs the SCCM Client all over again, even though it is already included in our master image.
thanks
Tamir Levy

First, as noted by Daniel, the Setup Windows and ConfigMgr task does much more than simply installing the ConfigMgr agent. This is clearly indicated by the name of the task (before the "and") "Setup Windows".
The are no true advantages to having the client agent in the image. If you are building your image with ConfigMgr though, it is unavoidable. Yes having it in the image should save time by not having to reinstall the pre-reqs -- most are pretty trivial though
but you may gain a bit although I can't say I've ever timed it.
There is no time savings to be had here, the client agent must be either installed or re-installed during the deployment TS, this is unavoidable. You'll need to look elsewhere if this is a required goal.
Jason | http://blog.configmgrftw.com | @jasonsandys

Multiple Image upload problem in IOS

In my Application, I have to upload multiple pictures and I have used file upload control. Application is working fine in IE Browser, Safari (on Windows) and other browsers, but getting problem with the Safari (IOS), After uploading the second pictures, first pictures gets replaced by the new one. This seems to problem only with mobile safari ( on IPAD, IPHONE with IOS 6.1). I have used the standard code <input type=file accept="image/*">.
The flow is like, user will upload 4 pictures and then will hit the save button, but as I upload the another pictures, the other pictures gets refreshed and latest uploaded image is shown in All fields. But on Server correct file is uploaded. Can anyone help me on this Problem?

Apparently the problem is with the host. According to the
host I was trying to install this on, there is a security issue
with Flash upload programs and they don't allow them. So I tried a
different host (Jodohost) and it worked.

Rotating Images with Java 2D

Im working on a program that requires the use of rotating images. I am using AffineTransformation to rotate and translate my BufferedImages. I have a problem when I rotate, I have a picture posted bellow of sample code and it's output.
http://i125.photobucket.com/albums/p64/roryfenrir/tankhelp.png
I four images, back (a solid color background, will not be solid in final product); tread and base, both get rotated together; and top, which rotates seperatly from the others.
My problem is that when an image is rotated, it takes a section of the background with it even though its a seperate image. Im wondering how to fix or get around this problem. Sorry if this is a dumb question but I would really like to get this down.
Thanks.
Edited by: RoryFenrir on Nov 11, 2008 4:13 PM

alright sorry, I didnt think that I needed to paste the whole code. Anyway I tried it out on some other computers and it didnt have this problem, both computers I used had java 6.0 and mine has 5.0 (Im pretty sure) so maybe thats the problem, but anyway I would still like to figure it out for this computer.
heres the code for the paintPanel, the program that runs it just adds it as a panel then sends arguments into the Overpaint method.
import java.awt.image.BufferedImage;
import javax.swing.*;
import java.io.*;
import javax.imageio.ImageIO;
import java.awt.*;
import java.awt.geom.*;
public class TankPaint extends JPanel
static BufferedImage back;
private BufferedImage top,base,tread;
private Graphics g;
private int x,y,x2,y2,deg1,deg2;
//boolean dialog = false;
     public TankPaint(String back,String top,String base,String tread,int deg1,int deg2,int x,int y,int x2,int y2)
          super();
          try
               this.back = ImageIO.read(new File("Backgrounds\\"+back));
               this.top = ImageIO.read(new File("Images\\"+top));
               this.base = ImageIO.read(new File("Images\\"+base));
               this.tread = ImageIO.read(new File("Images\\"+tread));
          catch (IOException ex) {}
          this.x = x;
          this.y = y;
          this.x2 = x2;
          this.y2 = y2;
          this.deg1 = deg1;
          this.deg2 = deg2;
     public void paintComponent(Graphics g)
      Graphics2D g2d = (Graphics2D)g;
     AffineTransform transform = new AffineTransform();
          g2d.setColor(Color.red);
         g.drawImage(back, x2, y2, this);
         //g.drawImage(tread, x-125, y-125, this);
             //g.drawImage(base, x-125, y-125, this);
             //g.drawImage(top, x-125, y-125, this);
          transform.setToTranslation(x,y-5);
          transform.rotate(Math.toRadians(deg1),tread.getWidth()/2,tread.getHeight()/2-10);
         g2d.drawImage(tread, transform, this);
             g2d.drawImage(base, transform, this);
          transform.setToTranslation(x,y);
          transform.rotate(Math.toRadians(deg2),top.getWidth()/2,top.getHeight()/2-25);
             g2d.drawImage(top, transform, this);
public void overPaint(String back,String top,String base,String tread,int deg1,int deg2,int x,int y,int x2,int y2)
     try
          this.back = ImageIO.read(new File("Backgrounds\\"+back));
          this.top = ImageIO.read(new File("Images\\"+top));
          this.base = ImageIO.read(new File("Images\\"+base));
          //this.tread = ImageIO.read(new File("Images\\"+tread));
     catch (IOException ex) {System.out.println("Image Error");}
     this.x = x;
    this.y = y;
    this.x2 = x2;
    this.y2 = y2;
    this.deg1 = deg1;
     this.deg2 = deg2;
     repaint();
}

I cant download from app store with 3g on ios 8

i cant download from app store with 3g on ios 8 I can download just with wifi, i don't have this problem on ios 7.1 please help me too fix it
I need too download with 3g

Hello, esienriqueiglesias.
Thank you for visiting Apple Support Communities.
I would need more information regarding what exact error, message or behavior that you are experiencing when attempting to download applications. However, some applications are large in size and require a Wi-Fi connection to download. I would recommend going through the troubleshooting steps in the attached article below.
Troubleshoot issues on an iPhone, iPad, or iPod touch
If you haven't been able to connect to the iTunes Store:
Make sure your date, time, and time zone are correct in Settings > General > Date & Time.
Note: Time Zone may list another city in your time zone.
Make sure that your iOS software is up to date by tapping Settings > General > Software Update (iOS 5 or later) or connecting your iOS device to iTunes and clicking Check for Update on your device's Summary page.
Check and verify that you're in range of a Wi-Fi router or base station. If you're on a device with cellular service, make sure that cellular data is turned on from Settings > General > Cellular.
Note: If connected to cellular data, larger items may not download. You may need to connect to Wi-Fi to download apps, videos, and podcasts.
Make sure that you have an active Internet connection. You can check the user guide for your device for help with connecting to the Internet.
Make sure that other devices (portable computers, for example) are able to connect to the Wi-Fi network and access the Internet.
Try resetting (turning off and then on again) your Wi-Fi router.
If the issue persists, try troubleshooting your Wi-Fi networks and connections.
Can't connect to the iTunes Store
http://support.apple.com/kb/ts1368
Cheers,
Jason H.

MDT : creating windows 7x64 images with required applications and deploying it

Hi,
We have to create windows 7 x64 and windows 8 images with all the custom applications and which can also be used on all the hardwares. I heard MDT can be used. How can I do this and what are the pre-requisites for installion and steps for configuring MDT
tool ?
do we need ADK for installing MDT ? I tried installing ADK ,but it says you need have ADK documentation_x86_en_us.msi.
Thanks.

For drivers, I have always used the .inf files.
For applications, it depends upon how you want to deploy them. Lots of people build their 'gold' image to contain all the applications they want installed, and then use that as a basis for deployment. Others build special scripts in to select
specific applications based on security groups.
The thing about MDT is that it is very flexible and can be adapted to a lot of different situations. You first need to define exactly how you plan to use it and then build your image(s) accordingly.
The guides you can find online will assist you in the specific steps for the solution option you chose. There is not a single, simple answer to cover all cases.
.:|:.:|:. tim

Universal Image with IP Base IOS

Similar Messages

Maybe you are looking for