Unknown file error when try to save project

We are experiencing a problem with some of our Final Cut Pro edit suites. An editor opens, or starts a new, project and makes some changes. When they try to save the project they get an error - File Error: Unknown file.
This doesn't happen often, but it usually happens at the worst possible times.
Does anyone have any ideas on what might be causing this?

I have the same problem. I get the following error when trying to save:
operation not allowed
I'm usually aware of this when working along and then that pops up. It happens when autosave cannot save. When I try to manually save I get the same error message.
This has happened twice after working for a couple hours. If I wait, it still will not save. The only solution is to shut down FCP without saving, restart, and the restore from the last autosave before the problem. I usually use about 45 minutes to an hour's worth of work.
I have no idea what causes this.

Similar Messages

Unknown file error when capturing in FCP 6

I capturing from a DVD, using AJA Kona card, component in. I can preview the video in Log & Capture, but when I try to Capture Now, I get an unknown file error and cannot capture. Just a regular DVD, analog capture. I've tried creating new projects. I save to an internal HD with over 300GB of available space. What am I missing?

If it is a data file drag and drop it on your desktop and open it.
If it is an encoded movie file can you play it? If so you can use the software I suggested to rip it from the DVD.
Give it a go.

Unknown File Error when toggling to FCP 4

I create my desired clip in Livetype and save project. I click and hold Livetype Icon in the Canvas window and press Command + Tab and toggle over to FCP 4. However, when I try to drop the Livetype Icon into my Browser I get Unknown File error and if I drop Icon onto FCP Timeline absolutely nothing happens.
Does anyone have any ideas on why this is happening???
Thanks.

Check to see that the LiveType.component file is installed correctly. It should be located in /Library/QuickTime - if it's not there, you may need to reinstall LiveType.

Want to tweak an apps script, but it gives error when try to save - help!

so I have a neat app that when used, will send an image it takes to your email address of choice. It uses "Mail" as the default mail app, but I only use Entourage as my mail app.
Opening the package contents of the app, I found the Applescript that controls this function.. see it below
on sendemail(emailto) --
-- set email_to to "[email protected]" --
-- set email_from to "[email protected]" --
set image_name to "Snapshot.jpg"
set image_path to ((path to home folder) as string) & image_name
set image_file to image_path as alias
tell application "Mail"
activate
set new_message to make new outgoing message with properties {subject:"Here is Your Snapshot"}
tell new_message
-- set visible to true --
-- set sender to email_from --
make new to recipient at end of to recipients with properties {address:email_to}
make new attachment with properties {file name:image_file} at after the last paragraph
-- activate --
end tell
send new_message
end tell
tell application "Finder"
-- delete image_path --
end tell
end send_email
it seems easy enough tweak to me.. see bold text above, but just change the line _tell application "Mail"_ to _tell application "Microsoft Entourage"_ and save the Applescript and viola.. BUT it does not work as once I make that weak & try to save the Applescript I get this error "*Syntax Error Expected “:”, etc. but found property*" and highlights just the word name which is followed by an existing ":". If I change it back to "Mail" it saves just fine... what gives?

I took a different tact that is getting me closer, the Entourage dictionary helped...
set thesubject to "here is your proof!"
set theBody to "here is your visual proof."
set theAttachment_name to "Default.jpg"
set theAttachment_path to ((path to home folder) as string) & theAttachment_name
set theAttachment_file to theAttachment_path as alias
tell application "Microsoft Entourage"
set theRecipients to {{address:{display name:"Contact 1", address:"[email protected]"}, recipient type:to recipient}, {address:{display name:"Contact 2", address:"[email protected]"}, recipient type:cc recipient}}
set theMessage to make new outgoing message with properties {recipient:theRecipients, subject:thesubject, content:theBody, attachment:theAttachment_file}
open theMessage
end tell
tell application "Microsoft Entourage"
send theMessage
end tell
now.. I have the email composed, the attachment is found in proper 'home' folder and correctly placed/attached, subject line set, contact addresses set.. BUT my final issue seems to be just getting the email to send. it creates and composes the email, but is waiting for it to manually be sent as it seems my final "tell" is not sending the email automatically like it should. I have used the Entourage script dictionary, but I am failing to see how to get the script syntax that finishes it off by sending the email automatically.
tell application "Microsoft Entourage"
send theMessage
end tell
this above tell is not working... any ideas?

Error when trying to save project

I get a window saying "Error (and then something about there being something wrong with a Volume)"
Sorry I can´t be more specific, but the computer is at work.
Does somebody know what I could do?
I tried to copy the timeline and put it into another project, but the same window popped up.
Is the only solution to go back in the autosave vault and find the latest project without the problem?
Any help is much appreciated:)

I've encountered that before and I can't remember the exact error message either. What has worked in the past when I've run into this is to quit FCP and relaunch it. Of course, you'll lose any work since your last save (or Autosave) but it's always allowed me to save after relaunching.
-DH

Always error when try to save my item type on workflow builder

Dear All,
I'm created a simple workflow. There is a notification with Result Type = Approval (Standard). Every I tried to save, workflow builder show a error message below:
WFDESV_FAIL COUNT=1
WFACTV_FAIL OPERATION=SAVE NAME=FIF_NOTIFY_APPROVER1_NTF TYPE=FIF
WFACTV_MESSAGE_RESULT RESULT=WFSTD_APPROVAL
What does it mean? I've tried to change Result Type with another standard Lookup Type (such as Boolean or another). But the error message still coming. How do I fix it?
Thank you,
Agas

Hi,
The first thing that is wrong is that your configuration is not finding the messages correctly, so that you get a meaningful message. Check that the keys in the registry for Workflow (HKEY_LOCAL_MACHINE\SOFTWARE\ORACLE\Workflow have been created correctly - there should be a Languages key and then ENG with an entry for Help, Message and TemplateDir which point to your Workflow home. Once that is set up, then you should at least get a meaningful message :)
There are two possible problems here, but I haven't had chance to look in the messages file to see which one it is. Either the notification does not have a performer assigned to it when used in the process, or you have not modelled a transition for all available options - you need to model all responses, or use the "default" transition to capture those that you have not explicitly included.
HTH,
Matt
WorkflowFAQ.com - the ONLY independent resource for Oracle Workflow development
Alpha review chapters from my book "Developing With Oracle Workflow" are available via my website http://www.workflowfaq.com
Have you read the blog at http://www.workflowfaq.com/blog ?
WorkflowFAQ support forum: http://forum.workflowfaq.com

Unknown file error, not with reference files

I get unknown file errors when trying to import quicktime movies (.mov) that are NOT reference files. I exported them using quicktime conversion and they take up several megabytes for about 10 seconds of video, and I even did cmd-j in quicktime to check. What else could be causing this? I have read write access too...
Thanks, Zach

What codec did you use when you exported the movies?

Error when trying to save a file

I get this error when trying to save any file (newly created or not) word document in MS word 2010:"You are attempting to save a file type (plain text files) that has been blocked by your File Block settings in the Trust Center".
I followed the directions given by the Microsoft Knowledge Base article 922850, but I am still having this issue. I can still save files as PDF but not in any kind of word format.
I also tried opening another file copy and pasting under a different name and it doesn't help.
Please Help.
Bruce

Hi,
Please try the following methods:
Using Administrative Template files and the Office Customization Tool to disable the restriction
Use a trusted location, or create an exempt location
Quote from:
http://support.microsoft.com/kb/922849/en-us
Regards,
George Zhao
TechNet Community Support

When I open a PDF file and I try to Save As to my shared drive I can't select it from the dropdown

When I open a PDF file and I try to Save As to my shared drive I can’t select it from the dropdown menu. (See screenshot).
When I select on the left side “Computer”, then my shared drive is available. (See screenshot).

Hi staceye,
Where are you creating the PDF file, and what is the error that you're receiving? Is it a file that is saved in your Acrobat.com online account?
Best,
Sara

Getting error when try to upload xml file into Data Template

Hi,
Getting error when try to upload xml file into Data Template.error:"The uploaded file XXSLARPT.xml is invalid. The file should be in XML-DATA-TEMPLATE format."Plz anybody help me.
Thanks,
Prasad.

Hi,
Anybody Help Plzzzzzz.
thx,
Prasad

Disk Full Error message when try to save word 2004

Hi all
please help me , I have problem when try to save my word 2004 and the message show that Disk full error!!!!!

Hi Rory,
This is a bug with database limitations which I understand may have been resolved. Request the latest build from SAP Support (raise an OSS message under part XX-PART-NKS).
Best regards,
Luke

Error File missing when try to run iTunes on windows. No more info. Uninstalled following support instructions and reinstalled - same message while reinstalling.

Error "File missing" when try to run iTunes on windows. No more info. Uninstalled following support instructions and reinstalled - same message while reinstalling.

Hi there slklug43,
You may find the troubleshooting steps in the article below helpful.
iTunes for Windows Vista, Windows 7, or Windows 8: Fix unexpected quits or launch issues
http://support.apple.com/kb/ts1717
-Griff W.

Updated to Oct 2014 version of photoshop CC. since that time cannot save ANY work. I can work on files but when I hit 'save as" every time it says "photoshop has quit working and needs to close."

Updated to Oct 2014 version of photoshop CC. since that time cannot save ANY work. I can work on files but when I hit 'save as" every time it says "photoshop has quit working and needs to close." Need solution now.

BOILERPLATE TEXT:
Note that this is boilerplate text.
If you give complete and detailed information about your setup and the issue at hand,
such as your platform (Mac or Win),
exact versions of your OS, of Photoshop (not just "CS6", but something like CS6v.13.0.6) and of Bridge,
your settings in Photoshop > Preference > Performance
the type of file you were working on,
machine specs, such as total installed RAM, scratch file HDs, total available HD space, video card specs, including total VRAM installed,
what troubleshooting steps you have taken so far,
what error message(s) you receive,
if having issues opening raw files also the exact camera make and model that generated them,
if you're having printing issues, indicate the exact make and model of your printer, paper size, image dimensions in pixels (so many pixels wide by so many pixels high). if going through a RIP, specify that too.
etc.,
someone may be able to help you (not necessarily this poster).
a screen shot of your settings or of the image could be very helpful too.
Please read this FAQ for advice on how to ask your questions correctly for quicker and better answers:
http://forums.adobe.com/thread/419981?tstart=0
Thanks!

In aperture 3.4.5, I get unsupported file error when exporting version of photo I've edited using plugins?

In aperture 3.4.5, I get unsupported file error when exporting version of photo I've edited using plugins. I have try reinstalling aperture three times, deleting plists a few times, reinstalling plugins, restarting my MacBook Pro many times. Everything I've tried may fix the problem for a very short while and I can export a few photos before it returns. The problem happens with topaz and photomatrix pro plugins after I edited and try to export version.

I had the same problem with the Photomatix plug-in and this solved it for me. I realised it only happened with Photomatix and not other plug-ins so I checked where the plug-ins were installed. The Photomatix plug-in was installed in
~/Library/Application Support/Aperture/Plug-Ins/
where ~ is the home location for the current user account. All the other plug-ins however were installed in
Macintosh HD/Library/Application Support/Aperture/Plug-Ins/
which is the location that makes them available to all user accounts on your Mac. Moving the Photomatix plug-in to this location solved the problem for me.
Note that the Library directory under the first location is normally hidden, to get to it hold down the Option (Alt) key and select it from the Finder Go menu.

I can't use Photobooth - when I open the app, I get the message: "Photo Booth couldn't save your photos - Photo Both encountered an error when trying to save your photos. You photos cannot be saved at this time."

I can't use Photobooth - when I open the app, I get the message: "Photo Booth couldn't save your photos - Photo Both encountered an error when trying to save your photos. You photos cannot be saved at this time."
i tried adding user macintosh hd/users/your_user/pictures/"photo booth" but still photo booth is not working and even images in photo booth cant be deleted they keep coming back

Back up all data.
This procedure will unlock all your user files (not system files) and reset their ownership and access-control lists to the default. If you've set special values for those attributes on any of your files, they will be reverted. In that case, either stop here, or be prepared to recreate the settings if necessary. Do so only after verifying that those settings didn't cause the problem. If none of this is meaningful to you, you don't need to worry about it.
I've tested these instructions only with the Safari web browser. If you use another browser, they may not work as described.
Step 1
If you have more than one user account, and the one in question is not an administrator account, then temporarily promote it to administrator status in the Users & Groups preference pane. To do that, unlock the preference pane using the credentials of an administrator, check the box markedAllow user to administer this computer, then reboot. You can demote the problem account back to standard status when this step has been completed.
Triple-click anywhere in the following line on this page to select it:
{ sudo chflags -R nouchg,nouappnd ~ $TMPDIR.. ; sudo chown -R $UID:staff ~ $_ ; sudo chmod -R u+rwX ~ $_ ; chmod -R -N ~ $_ ; } 2> /dev/null
Copy the selected text to the Clipboard by pressing the key combination command-C.
Launch the Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Paste into the Terminal window (command-V). I've tested these instructions only with the Safari web browser. If you use another browser, you may have to press the return key after pasting.
You'll be prompted for your login password. Nothing will be displayed when you type it. You may get a one-time warning to be careful. If you don’t have a login password, you’ll need to set one before you can run the command. If you see a message that your username "is not in the sudoers file," then you're not logged in as an administrator.
The command may take a few minutes to run, or perhaps longer if you have literally millions of files in your home folder. Wait for a new line ending in a dollar sign (“$”) to appear, then quit Terminal.
Step 2 (optional)
Take this step only if you have trouble with Step 1 or if it doesn't solve the problem.
Boot into Recovery. When the OS X Utilities screen appears, select
Utilities ▹ Terminal
from the menu bar. A Terminal window will open.
In the Terminal window, type this:
res
Press the tab key. The partial command you typed will automatically be completed to this:
resetpassword
Press return. A Reset Password window will open. You’re not going to reset a password.
Select your boot volume ("Macintosh HD," unless you gave it a different name) if not already selected.
Select your username from the menu labeled Select the user account if not already selected.
Under Reset Home Directory Permissions and ACLs, click the Reset button.
Select
 ▹ Restart
from the menu bar.

Unknown file error when try to save project

Similar Messages

Maybe you are looking for