Unknown indexes in ABAP dictionary

Hi all,
can anyone help me with the procedure to handle unknown indexes in ABAP dictionary for a BW SAP_BW 350 Production system?
The list of some of the indexes are as follows :
/BI0/E0CCA_C11~P
/BI0/E0FIGL_C01~P
/BI0/E0OPA_C11~P
/BI0/E0PS_C04~P
/BIC/EIEFERC~P
Thanks a lot in advance ....

Hello Varsha,
It seems that the index for these InfoProviders are missing.
Goto RSRV -> Elementary Test -> Database -> Database Indices of an InfoCube and Its Aggregates
It should be green. If its red there will be a correct button on the top just excute it
or You can use the following Function Module to check
RSDU_INFOCUBE_INDEXES_CHECK
To Repair
RSDU_INFOCUBE_INDEXES_REPAIR
Thanks
Chandran

Similar Messages

Unknown indexes in ABAP dictionary for a BW SAP_BW 350 ?????????

Hi all,
can anyone help me with the procedure to handle unknown indexes in ABAP dictionary for a BW SAP_BW 350 Production system?
The list of some of the indexes are as follows :
/BI0/E0CCA_C11~P
/BI0/E0FIGL_C01~P
/BI0/E0OPA_C11~P
/BI0/E0PS_C04~P
/BIC/EIEFERC~P
Thanks a lot in advance ....
Madhavi Rane

You should be able to delete and recreate indexes from the infocube performance tab, RSRV or DB02. The bigger question is why these e fact table indexes are not being handled properly. I would try searching OSS Notes to see if yo ufind one relevant for your DB;
This older Notes provides some good background
Note 594287 - DB6: Corrections to the primary index of fact tables

Missing Index there Unknown indexes in ABAP Dictionary in DB02

Dear All,
I am getting error in T-code DB02 >Missing Index there Unknown indexes in ABAP Dictionary.
Please find the following details.
Unknown indexes in ABAP Dictionary
    DB indexes                      11
        MARA_MEINS
        MARA_ZER
        MCHA_VFDAT
        VBRP_ARKTX
        VBRP_CHARG
        VBRP_FKIMG
        VBRP_KZWI1
        VBRP_MATKL
        VBRP_MATNR
        VBRP_SPART
        VBRP_WERKS
Please suggest how to correct them and can caution we have to take before creating the
Index.
The process creating the index form se11 table and there index>database utility and than create .The same process can be use .
Regards,

Hi,
Please use the below procdure:
- Goto transaction SE11
- Enter table name and press view
- Click button "Indexes..."
Please alse check with the below links for more information.
Index:
http://help.sap.com/saphelp_nw04/helpdata/en/cf/21eb20446011d189700000e8322d00/content.htm
Creating Secondary Index
http://help.sap.com/saphelp_nw04/helpdata/en/cf/21eb47446011d189700000e8322d00/content.htm
http://help.sap.com/saphelp_erp2005/helpdata/en/1c/252640632cec01e10000000a155106/frameset.htm
http://help.sap.com/saphelp_erp2005/helpdata/en/c7/55833c4f3e092de10000000a114027/frameset.htm
Check with this also......[click here|Steps for creating a database index;.
With Regards,
Krishna.

DB02 = Missing Tables and Indexes = Unknown objects in ABAP Dictionary = DB views

Hi SAP Gurus,
on our SAP NetWeaver 7.x BW (based on AIX/Oracle) I find via transaction DB02 (path = Diagnostics => Missing Tables and Indexes) under "Unknown objects in ABAP Dictionary" under DB views a BW object /BI0/.....
When I make a double click on the object, I am getting the popup window "Display not possible for this object":
How can I identify the object and clarify with the BW application expert, if needed, how to resolve this object?
I searched already via RSA1 for the object, but I wasn't able to find anything so far ...
Thanks for your help and ideas.
Best regards
Carlos

Hello Carlos
The database view in question is a temporary database object created during a query execution.
Please read this SAP note 449891 - Temporary database objects in BW 3.x to understand what that view is all about and impact if those views are removed.
The SAP notes 449891 and 1139396 suggests to run the report SAP_DROP_TMPTABLES to drop these temporary objects. Whether the objects are still required or not is a question to be put across to the BW team. If the temporary objects are removed when they are used by a query, then the query will fail.
Have a nice day
RB

Unknown Objects in ABAP Dictionary

Hello Everyone,
I am getting a few objects that come up when running the Missing tables and Indexes command in the DBCOCKPIT. Under Unknown Objects in ABAP Dictionary I have the following objects appear:
sap_tabstats
V_MSSDWDLLS
sap_tabstats_V_newest
sap_tabstats_V_oldest
I cannot find anything referencing how to correct this issue. Can anyone be of any assistance? I would greatly appreciate it. Thanks!

Hi:
for sap_tabstats, sap_tabstats_V_oldest and sap_tabstats_V_newest you can find in note 1027512 :
4. IMPORTANT CHANGES IN DATA COLLECTION AND HISTORY
o Applying SP12 on a SQL Server system will introduce a new method
        for collecting database and table size histories. This new
        methode relies on t-sql objects sap_tabstats,
        sap_tabstats_V_newest, and sap_tabstats_V_oldest. These items
        aren't in the data dictionary and should be ignored in any
        discrepancy reports. They are added to an exception table for
        SP13.
For V_MSSDWDLLS you should read note 1020865. The view can be ignored.
Regards
Clas

Unknown object in ABAP Dictionary

Hello
In st04 in "Missing tables and indexes" are many indexes have reported unknown "Unknown object in ABAP Dictionary".
This is because indexex are created directly in DB. Is there a way to solve this problem?
We have db : oracle 10.2.04 and sap SAP ECC 6.0 (Pkg. lvl. 254).

Hi,
In ST04, If you click Missing tables and indexes then next to "Unknown object in ABAP Dictionary" there is a information button which says as below, kindly go through it which could help you.
" Here objects which were found on the database but which are not defined
in the ABAP Dictionary are displayed. These objects are displayed for
information only, since they generally do not belong to the SAP System.
These objects normally do not cause problems.
The objects are generally created directly with database means. If the
author is unknown, the purpose of the table can sometimes be determined
using the display function. Any data can only be displayed with database
means since the SAP tools for displaying data are based on the
definition in the ABAP Dictionary.
In some cases, such objects were already overlooked by SAP at delivery
or occurred during upgrading. To check this, search in OSS using the
keyword DB02 and the Release level for a corresponding Note.
Customer tables, views and indexes should always be created with the
ABAP Dictionary. This is the only way to ensure that the objects are
recognized by the SAP System and that for example collisions can be
avoided during an upgrade."
Regards,
Sharath

BW - Unknown objects in ABAP Dictionary - DB Tables

Hello gurus,
As a result of the consistency check in DB02 transaction, our BW System is showing a high number of "DB Tables" and "DB Tables withouth unique index" as unknown objects in the ABAP dictionary.
Is there any way to solve these consistency issues detected in DB02?
Thanks
Regards

Hi Dibya,
I checked the SAP note 33814 and it tooke me to the SAP note 449891 - Temporary database objects in BW 3.X
According to the recommendations, I executed the report SAP_UPDATE_DBDIFF, and I got as result 579 secondary indexes missing in the DB from the and still the 5 DB Tables unknown in the ABAP dictionary and 2 DB Tables withouth unique index,
I executed the report SAP_INFOCUBE_INDEXES_REPAIR in order to try to repair the secondary missing indexes that were shwon but withouth getting any results.
Do you have any recommendation to solve this situation? In the original scenario the DB02 transaction wasn't reporting any missing index.
Thanks and regards,

Unknown object in ABAP dictionary- TADIR^SRCDEP

Hi,
I found an entry in unknown object in ABAP dictionary while monitoring the system.
This this the location I found this entry DBACOCKPIT-> Diagnostics-> missing table and indexes-> unknown object in ABAP dictionary.
Could you please help to figure out how to solve this?
Thanks in advance.
Regards,
Pradeep

Hello,
You can ignore the index TADIR^SRCDEP in transaction DB2.
The installation creates the index TADIR^SRCDEP to avoid hanging
situations on the database while executing reports. When the
installation is finished you can delete this index.
Drop the index TADIR^SRCDEP on the database:
    o start SQL Server Management Studio
    o connect to your SQL Server
    o open a query window and execute the following command (replace
       SID by the uppercase system name, sid by the lowercase system
       name):
       drop index [TADIR^SRCDEP] on SID.sid.TADIR
Best regards
Clas

Error in CHECK_REQUIREMENTS phase (Open ABAP Dictionary Conversions)

Hi Gurus,
When were are trying to update SPAM/SAINT to version 7.00/0033 from 7.00/0029
we're encountering 'Open Conversions in the ABAP Dictionary' in CHECK_REQUIREMENTS phase, refraining to proceed further.
It was due to 2 indexes in a table.
When i checked(using SE14), those two indexes were not appearing in dictionary, hence we've removed them at the ORACLE level, reset the queue and tried to update again, and got the same error .
Table PAT03 - has the following
Patch - 'SAPKD70033'
Status - '?'
and the table PAT02 has 2 enties of those two indexes.
with Patch - 'OPEN_TBATG'
How to proceed further,pls provide us a solution.
Regards
Prabumanoharan

Hai,
Goto SE14 - select "Indexes" and "Activate". But you should have tried this before deleting the Indexes from the Oracle level.
or try restarting the update.
Regards,
Yoganand.V

Customise table inconsistency between ABAP Dictionary and the databas

Hi all,
I have encountered a problem where by, I was not able to activate a table due to inconsistency between ABAP Dictionary and the database.
After I run the SE14--> Check Database object. It has show that there is a missing Unique Index(Primary Index) at the Database Level, but at ABAP Dictionary it is there.
I have try to recreate the primary index at the Database level, but failed. Because one of the primary key field is been dropped from this table.
So now, may I know how can I still make this table Active again?
Is it save to folllow the following solution that I found on internet?
Syntax error in SDCC, table inconsistency between ABAP Dictionary and the database, transport error 8 during the generation of ABAP Dictionary. When you call Transaction SDCC, a termination occurs due to a putative syntax error because a table is not known or active. When you check this with the ABAP dictionary (SE11), you notice, that the table is active or inactive, however it is not possible to activate it. The activation might terminate with the error message 'Inconsistency between ABAP Dictionary and database'. A check of the affected object also delivers this error.
Solution
Proceed as follows:
Log on as user DDIC
Call Transaction SE14
Enter the affected table name and
select EDIT
In the following screen, choose Table -> Reconstruct
Confirm the execution
Call Transaction SE11
Enter the affected table name
Display
Activate
Thanks.
CK

I managed to solved this by
Solution
Proceed as follows:
Log on as user DDIC
Call Transaction SE14
Enter the affected table name and
select EDIT
In the following screen, choose Table -> Reconstruct
Confirm the execution
Call Transaction SE11
Enter the affected table name
Display
Activate
Thanks.
CK

IDES ERP 2005 / open ABAP dictionary conversion during SPAM Update

Dear all,
First of all, I'm currently busy implementing a educational enviroment for our company, we are using IDES MySAP ERP 2005 SR1 MSSQL.
At the moment we are trying to upgrade the SPAM version from version 20 to 22.
However, during the requirement checks the following error occurred :
<b>Open conversions in the data dictionary</b>
<i>Phase CHECK_REQUIREMENTS: Explanation of Errors
Some open conversion requests still exist in the ABAP Data Dictionary
for the following ABAP Dictionary objects. To avoid inconsistencies and
loss of data, you must process these conversions first.
Proceed as follows:
- Open a new session.
- Start the Database Utility (transaction SE14).
- Correct the inconsistencies for the specified objects.
- Repeat the import phase. If no more inconsistencies are found, the
import continues.
Phase CHECK_REQUIREMENTS: Open ABAP Dictionary Conversions
Object Type       Object Name
Table Index       LXE_WRK_4 ~ STA
                   SC2T327F363DFA4T ~ ESI
                   SC2T327F363DFA4T ~ KYS
</i>
It seems that the indexes mentioned above are missing or doesn't exist!!!! i've tried looking for a sap note or a solution on SDN. However, haven't found a solution at all, or I'm looking at the wrong spot.
Is there a note or can somebody provide me what's in the indexes, so i can create it in our IDES system.
Regards,
Yam-Lang Lee

Hi Kiran,
Thank you very much. I managed to create the first index.
However not the indexes on table SC2T327F363DFA4T. Can't find any information for the indexes for this table. Did found note 959811. There it state that de indexes were deleted. But still stuck in the check_requirements of the SPAM Update!
Greetings,
Yammie

Patching ST_PI, open conversions in ABAP dictionary

Hello
during a patching of ST-21 2008 the tool stops at CHECK_REQUIREMENTS phase with the screen:
open conversions in ABAP dictionary
Some open conversion requests still exist in the ABAP Dictionary for the
following ABAP Dictionary objects. To avoid inconsistencies and loss of
data, you must process these conversions first.
Proceed as follows:
- Open a new session.
- Start the Database Utility (transaction SE14).
- Correct the inconsistencies for the specified objects.
- Repeat the import phase. If no more inconsistencies are found, the
import continues.
INDEX GLPCA-Z01
Now , no index exists in dictionary and database but in the past probably it existed and was cancelled . Anyway the table GLPCA is consistent in database and like runtime object.
I've activated it again but the problem is always the same
any idea?
thanks
Nicola

- start transaction SE14
- use the menue to "DB Requests - Created with import"
Check if there are any outstanding conversions.
Markus

Indexes in data dictionary

Hi all,
            can anyone tell me what is the process of creating a secondary index.?
            can we create a secondary index if a field is assigned with primary key?
             can we create secondary index for a mara table field?
            when we click on INDEXES in data dictionary ---> database table by selecting a field then we get unique index and non-unquie index, what does that mean?
regards,
satish

What is Secondary Index:
first i will tell u little about primary index.
The primary index contains the key fields of the table and a pointer to the non-key fields of the table. The primary index is created automatically when the table is created in the database.
You can create further indexes on a table in the ABAP Dictionary. These are called secondary indexes.
PURPOSE:
This is necessary if the table is frequently accessed in a way that does not take advantage of the sorting of the primary index for the access. Different indexes on the same table are distinguished with a three-place index identifier.
Generally it is used when field which u want is not a primary field .
Advatange:
1. faster access to data when field is not a primary key field.
Disadvatnage:
1. Slower down database table inset, update delete commands.
You go for secondary index when you have any SELECT statement which has a WHERE clause which is not effectively using the existing index(s). But this decision of additional index has to be made in sync with the Basis and Functional team. Every additional index will be a burden on the database and the system resources.
The secondary index is a type of index in database table. Indexes are used to improve the performances of data retrieval from the table. This happens by passing the values to these indices during SELECT query in the WHERE clause.
There are different types of indices. Primary key is default present for all the tables in database. Only ONE Primary key can exist in a database table. It results in unique records in the database table.
The other type of index is secondary index. Multiple fields can be grouped to make a secondary index of table. If all the field values is passed during SELECT query, the performance increases drastically.
Not many fields should be included in secondary index. Large number of fields reduces the performance of INSERT query of database.
Indexes are used to speed up data selection from the database. System chosse and use the index based on the fields given in WHERE and HAVING clause.
The primary index is always created automatically in the R/3 System. It consists of the primary key fields of the database table. This means that for each combination of fields in the index, there is a maximum of one line in the table.
If you are searching on non-key fields, you can create your own secondary index, which can restrict the number of table entries searched to form the result set.
Improper use of Secondary index can slow down the performance. Discuss with Basis team before creating a secondary index.
Check the threds -
secondary index
Secondary Index
Primary index: the primary index contains key fiels of a table and a pointer to non-key fields of the table. The primary index is created automatically when a table is created in database and moreover you can further define reference to the primary index which are known as Secondary index.
How many indexes can be created for a table? -> 9
When you are selecting the data on non primary key,obviously system will give output with bad performance ,if you create secondary index then it gives better performance
GOTO SE11 -> give ur table name -> click on display button -> click on index button ->click on create button -> give id ( z98 like ) -> give field names MANDT ,then ur field names
save and activate
Regards
Vasu

Register Table in ABAP Dictionary

One of our SAP RWD standard table got deleted during the upgrade. I have a backup of that table & created it using Create Table SQL commands directly at the database level.
I did exp & imp of various tables too however in SE11 the tables created directly in database no matter Z tables or SAP Standard tables does not show up.
My question is that how to register that table in ABAP dictionary?

Table is a part of PSAPCRMUSR & does exists in schema SAPCRM.
Let me give another example:
One of SAP Table STERM_LINK got corrrupted and we did'nt knew about it for almost a month. OSS replied back saying that its a 3rd party table and we are not using any modules that would have updated/read that table. Also that table did'nt had any data.
OSS suggested that either we exp/imp that table from QA to PRD or they can send us a script which is a normal create table....... script and we can drop can corrupted table.
Now in this example if we drop that table and recreate it using script at database level, it will be unknown in dictionary.
How to solve this kind of issue?

Where is stocked the description of different object in ABAP Dictionary ?

Hi,
Please, Can any one tell me where is stocked the description of different object in ABAP Dictionary like: Domain (Description, value range u2026), View, Data Type...?
Best regards
Mustapha

Hi,
Check these tables:
DD01T                          R/3 DD: domain texts
DD02T                          R/3 DD: SAP table texts
DD03T                          DD: Texts for fields (language dependent)
DD04T                          R/3 DD: Data element texts
DD06T                          R/3 DD: texts on SQL tables
DD07T                          DD: Texts for Domain Fixed Values (Languag
DD08T                          Texts on the relationship definitions
DD12T                          Text Table for DD12L (Short Descriptions o
DD15T                          R/3 DD: texts on SAP objects
DD20T                          AS400-T_MCOBJECT: MC Object Texts
DD23T                          AS400_L-MCID: Matchcode ID Texts
DD25T                          Short Texts for Views and Lock Objects
DD29T                          AS400_L-SELCOND: Selection Condition Texts
DD30T                          Search help texts
DD40T                          Text on table types
DD90T                          R/3-DD: Text for External Index
Regards,
Joy.

Unknown indexes in ABAP dictionary

Similar Messages

Maybe you are looking for