Unload swf but still playing sound

hi I have 10 swf's, i m displaying 1 swf for each question displaying 1 swf, but problem is i unload the swf and load the next question clip but old one is still playing sound..
what is the solution//????

There are a few things you'd want to do when unloading a SWF in AS3 - but the most important would be to tell your Loader object to unload. Specficially, unloadAndStop(). So if you used myLoader to load in the SWF file, then use myLoader.unloadAndStop();
It's also a good idea to stop any audio or video that you have playing in the SWF file - but that all depends on how you have thinsg set up and are using the audio/video in the SWF.

Similar Messages

I have an iMovie that I created 10 years ago. I found the disk and imported. Everything is there except the sound! I converted in Wondershare to MPV4 but still no sound. There is an audio clip that was imported from an analog video camera.

I have an iMovie that I created 10 years ago. I found the disk and imported. Everything is there except the sound! I converted in Wondershare to MPV4 but still no sound. There is an audio clip that was imported from an analog video camera. Does anyone know how I can get the audio back?

Whitelab Records wrote:
So, 20 views and nobody's anybody the wiser?
A small update to this issue....
I have been trawling the forums to find an answer but to no avail...
And... I've tried exporting and bouncing individual stems and the full session, either by muting all bar the stem or soloing the stem.....and still nothing.
Same problems.....everything is audible in audition but nothing plays on playback.
Since the 'prelisten' channel strip is Solo safe this would indicate that you have a track or channel strip soloed somewhere else, out of sight. Are the Mute buttons on your channel strips blinking?
To view all objects in your mixer, click the button. You may have to scroll sideways to check the whole mixer.

How can I get volume on my I6 to hear incoming calls . I went to setting , sounds, and selected a tone, but still no sound for incoming calls, texts, or other notifications.

How can I get volume on my I6 to hear incoming calls . I went to setting , sounds, and selected a tone, but still no sound for incoming calls, texts, or other notifications.

Hi rsample,
Thank you for visiting Apple Support Communities.
Your symptoms make it sound like the iPhone side switch is set to silent mode.
iOS: Understanding sounds, ringtones, and alerts
Set your device to silent mode
iPhone: Toggle the Ring/Silent switch on the side of the device.
Best Regards,
Nubz

Youtube videos show up as a blank but still play the audio. where the video should be is a blank space on firefox 4 rc

Youtube videos show up as a blank but still play the audio. where the video should be i s a blank white space.
They were working fine last week

Try if disabling the hardware acceleration in the Flash Player help.
See [[Cannot view full screen Flash videos]]
* http://www.youtube.com/swf_test.html (right-click the player: Settings)
Flash "Display settings" window:
* http://www.macromedia.com/support/documentation/en/flashplayer/help/help01.html

Unloading swf but the swf sound still play

after unloading swf
the sound of swf still play ??
how i can stop the swf completely?

if u mean using
SoundMixer.stopAll();
before the loading swf code
i try that
and still playing
thats the code of scene 1
stop();
import flash.events.Event;
          SoundMixer.stopAll();
var scene1s:Loader = new Loader ();
scene1s.load(new URLRequest("scene1.swf"));
addChild(scene1s);
addChild(entery_bt);
entery_bt.addEventListener(MouseEvent.CLICK, ToMainEntery);
function ToMainEntery(event:MouseEvent):void
          scene1s.unloadAndStop();
          MovieClip(this.root).gotoAndPlay(1, "Scene 2");
so he goes to scene 2 with the sound still playing ?

My computer has lost sound on utube but still plays on itunes

Hi, I no longer have sound on utube or news channels but do have sound on itunes.
ideas?
Garrett

Hmmm, looks serious from here...
Could be many things, we should start with this...
"Try Disk Utility
1. Insert the Mac OS X Install disc, then restart the computer while holding the C key.
2. When your computer finishes starting up from the disc, choose Disk Utility from the Installer menu at top of the screen. (In Mac OS X 10.4 or later, you must select your language first.)
*Important: Do not click Continue in the first screen of the Installer. If you do, you must restart from the disc again to access Disk Utility.*
3. Click the First Aid tab.
4. Select your Mac OS X volume.
5. Click Repair Disk, (not Repair Permissions). Disk Utility checks and repairs the disk."
http://docs.info.apple.com/article.html?artnum=106214
Then try a Safe Boot, (holding Shift key down at bootup), run Disk Utility in Applications>Utilities, then highlight your drive, click on Repair Permissions, reboot when it completes.
(Safe boot may stay on the gray radian for a long time, let it go, it's trying to repair the Hard Drive & clear caches.)
If perchance you can't find your install Disc, at least try it from the Safe Boot part onward.
After reboot, do we still get those 2 errors?

No audio output from my MacBook, but still chime sounds upon loading !

Hi Guys,
Basically my Mac all of a sudden started bugging out loading real slow, Generally lagging. So I held the the power button down for ten seconds for an emergency reboot. When everything loaded up again I couldn't get any sound from my Mac being no bleeps when when I'd toggle with the volume or any sound when listening to iTunes. HOWEVER.. The chime upon loading when turning on the Mac works and when I open up one of my projects in Logic Pro X the sound works in relation to playing the music I've worked on with my project but still if I toggle the volume there's still no sound along with iTunes, Youtube... Everything !
Extremely strange and I'd really appreciate help with this please.
Kind Regards,
yungprince.

Well, as you have problems with two machines add both machine's details following >>Posting Guide<< as already said.
Reinstall in any case realtek audio: http://www.msi.com/service/download/driver-2584.html
Quote
My video card is an MSI GeForce 9800.
Which?
http://www.msi.com/service/search/?kw=n9800&type=product

IPod nano (5th Generation) Black Screen but still plays Music

Problem:
I see a black screen and no backlit normal screen - there's a faint Apple Logo when the device is turned on.
I can navigate the scroll wheel and hear the audible "clicks" when circling the scroll wheel.
I can push play and it will play music just fine. FF, Rewind, Menu, Play/pause all work correctly.
Tried the following:
Menu + Select + held down for 5-10 seconds. faint apple logo dissapppears then I push Play and it re-appears. Still plays music just fine but screen still black with faint apple logo and no back light.
Restore Factory Settings via iTunes. It erased all media. put a song on there to test. can play song but same issue (no back light OS, just black + faint apple logo on the display)
Tried Rewind + select to enter diagnostics - nothing happens, same issue
Please help.

Hi yning_,
If you are having issues with the display on your iPod Classic, you may want to go through the steps listed in the following Troubleshooting Assistant to see if they resolve your issue:
Apple Support: iPod Classic Troubleshooting Assistant
http://www.apple.com/support/ipod/five_rs/classic/
Cheers,
- Brenden

IPod will not mount to desktop or iTunes - But still plays fine ??

My iPod will no longer mount on the desktop or in iTunes. I have read through all of the postings on the site, and all of the ideas, and about tried them all. I haven't quite pinpointed the issue I'm having - if anyone can help, please post something for me.
Equipment: iPod 4th Gen - running software version 3.1
Tried connecting via FireWire/USB on two Macintosh G4's - both running 10.4.3, iTunes 6.01. Again, shows up in DiskUtility, but that's it.
I tried iPod updater - but the ipod doesn't show that it's connected to do either an update or a restore. I'd gladly restore the iPod, and reload everything, but it won't show up to be able to do a restore. I also tried in terminal running the /sbin/fsck_hfs -fy /dev/disk4s3 in Terminal, and also the back up - dd if=/dev/disk3s3 of=myiPod.dmg - which did create a dmg file, which hopefully backed up my ipod - no biggie if it didn't. I just want to be able to load my podcasts again!
The odd thing is that all the music still plays fine. The iPod charges off both the USB and FireWire. It just won't mount on either computer.
Any help would be appreciated!!

Hi all,
I have been having vey similar problems and I am sure it is not an issue with ipod. I have plugged my paperweight(previously know as an ipod of the feb 2004 vintage with a 20g drive)into a pc with itunes and it was recognised. However my and other ipods do not mount in any way onto my ibook. I have tried all the resets and reinstalls possible.
I am considering formatting the hard drive and reinstalling panther from scratch to see if this corrects the problem. However as I am not sure which update caused the problem I am concerned I will end up in the same situation.
If anyone has any advice or knows if using Tiger will help when I reinstall, I would really appreciate it.
I am loathed to do this as it will take days to return my mac to it's current setup. However with out a solution being offered by apple (I have had little help from the customer support lines except to say send it for a service that will cost around £100-£150) I can't see anything else left to try.
Thanks in advance
iBook Mac OS X (10.3.9)

My ipad has no sounds. I tried everything that the internet community says but still no sounds even the apple technician where I bought it doesn't know why

Pls need your help badly. I tried everything that internet community suggested but still I don't have any sounds... I tried contacting tech personnel where I bought it but even they can't resolve my problem.. Sometimes I here sounds for 5 mins then puff it goes off again... Hope you can help me..

Hello bing5423,
The following article provides steps that can help get your iPad powered on again.
iOS: Not responding or does not turn on
http://support.apple.com/kb/TS3281
Cheers,
Allen

Installed drivers but still no sound

i have installed the sound drivers after i formatted my system...but still the system doesnt detect any sound device..i use windows xp...

Hi: Since you didn't provide the model # of the PC you are having problems with, it is difficult to determine why your sound isn't working. One reason may be that in addition to the specific hardware audio driver, you also need the Microsoft UAA Driver.

Volume off but still have sound

I'm having issues that when my volume is off, I still get notification sounds playing and when I send an email, the send sound still plays. Any suggestions?

Try a reset:
Hold the Sleep and Home button down for about 10 second until you see the Apple logo.

IPod Touch freezes and cannot be opened but still plays songs

i have 6months old iPod Touch 8gb and even in the first week of my purchase, while playing songs, it will suddenly freeze: it won't let me do anything. Just black screen but it still plays the music.
i would reset it (home button + sleep/wake button) and then it would be ok again. but if I just let it playing while its on freeze, after a few minutes it would stop playing and the freezing will continue.
I have tried restoring it: erasing all contents on my iTouch but it won't do anything.
This happens quite a lot of time now. It's actually worse now. I happened to bring it to the MAC store to let them define the problem. They said it probably has something to do with the "music" that I'm playing. Might corrupted or something. But of course I know what I'm playing and what I'm playing isn't corrupted. They would try to diagnose it though but it will take days for them to do it by restoring it and downloading other music and if, they said, the new downloaded songs won't make the iPod freeze, they would have to charge me even if my iPod is still on warranty.
Is this a common problem? should i try to let them fix the problem or is there anything i can do myself to fix it?

Welcome to the discussions,
to make sure the problem is not the iPod software, restore your device "as new iPod" without using the backup to get your data back.
If you can use your iPod without problems after that, the some data on the iPod was corrupted. Add your music step by step to make sure the music files are ok.
Restoring: http://support.apple.com/kb/HT1414

Drivers are all working but still no sound with windows 7

I have a very frustrating sound issue. My sound has worked completely fine up until yesterday. When I booted up my computer, I realized that no sound came out. I've gone through many forums to find the solution and I've checked all the simple stuff like making sure that my devices are enabled, audio service enabled, reinstalled/upadated the sound drivers etc... I've even gone into BIOS and loaded default settings and still no sound. I've gotten to the point where I have no idea what else I can do. Help please!
This question was solved.
View Solution.

Hello all,
I'm sorry that you are running into this issue of no sound. Do you get any sound through headphones?
Also I would suggest trying a hard reset as the next quickest and less invasive step. This can sometimes fix strange issues because it drains all of the electricity out of the unit. Here are the steps for a Hard Reset.
Hope this helps! Let me know the results if you get a chance

Ipod nano has only an apple on the screen all the time, but still plays???!

i was using my nano as usual 2day, and then i notices the screen wasn't doing anything, so i reset it and all i get is the apple, it still plays music, and syncs with itunes, and u can get into the diagnostics on it, and they display properly, and it passes all the tests... just the display not showing when it loads up..? help!!

Tried restoring it, still the same. loaded all songs back onto it, and it plays them... still just an apple on the screen! apple still there when the ipod is supposed to be off, and then it wont come back on unless u reset it again.

Unload swf but still playing sound

Similar Messages

Maybe you are looking for