Unnamed Device in Network after adding new Laptop

I just set up a new wireless network using the WRT300N Router. When I added a second computer to the network using a network cable connected to the router and then looked at the Network Map, both computers were listed, but a third device showed up identified as "Unnamed Device". Is this a third computer in range of the router that got added? Do I need to remove it from the network? And if so, how do you remove a computer from the network? Any help is appreciated. Thanks

Well if you added the pc to the network...ie., if its connected using the ethernet cable or through the wireless connection you can disconnect it from the network & no more you will be able to see the Unnamed device...

Similar Messages

This sign appeared in my account: "Your payment method was declined. Update your biiling info'. After adding new information about my others cards I see the same sign. Can't understand what the problem is and what should I do. Need help!!!

This sign appeared in my account: "Your payment method was declined. Update your biiling info'. After adding new information about my others cards I see the same sign. Can't understand what the problem is and what should I do. Everything used to be good before.
Do anyone know what I supposed to do in that situation?
Really need help!
Thanks in advance.

Contact iTunes Customer Service and request assistance
Use this Link > Apple Support iTunes Store Contact

EDIT method doesn't work after adding new row

I would like to start editing after adding new row into TableView.
I copied example from Oracle website: [Using JavaFX UI Controls - 13 Table View|http://docs.oracle.com/javafx/2/ui_controls/table-view.htm#CJAGDAHE]. Then I put additional button for adding new row and define action for the button.
    final Button addButton = new Button("Add");
    addButton.setOnAction(new EventHandler<ActionEvent>() {
        @Override
        public void handle(ActionEvent arg0) {
            Person p = new Person("", "", "");
            table.getItems().add(p);
            table.getSelectionModel().select(p);
            table.edit(table.getSelectionModel().getSelectedIndex(), table.getColumns().get(2));
    });In result I can see selected new row but the table doesn't start edditing in the third column.
I have similar method for editing existing rows and it works properly.
    final Button editButton = new Button("Edit");
    editButton.setOnAction(new EventHandler<ActionEvent>() {
        @Override
        public void handle(ActionEvent arg0) {
            table.edit(table.getSelectionModel().getSelectedIndex(), table.getColumns().get(2));
    });Could you help me what I do wrong?

Try wrapping the setCaretPosition(...) method in a SwingUtilities.invokeLater(...)
caret=outputArea.getDocument().getText(0,outputArea.getDocument().getLength()).length();Should be:
caret = outputArea.getDocument().getLength();

Your message wasn't delivered because of security policies message after adding new company to our network

After adding a new acquistion company to our network the company is now receiving a undeliverable error message when trying to email Parent Company. The acquistion company is still hosting there own email. Emails do come
through sometime though. Odd thing is the part where it says "The following organization rejected your msessage because of relay. The server that is asking for relay has nothing to do with Exchange and is a webserver.
Your message wasn't delivered because of security
policies. Microsoft Exchange will not try to redeliver this message for you.
Please provide the following diagnostic text to your system administrator.
The following organization rejected your message: XXXXX08WEB02.
Sent by Microsoft Exchange Server 2007
Diagnostic information for administrators:
Generating server: exch-srv.xxx.local
xxxx08WEB02 #550 5.7.1 Unable to relay for
Original message headers:
Received: from exch-srv.bb.local ([10.36.x.x]) by exch-srv.xx.local
([10.36.10.9]) with mapi; Fri, 21 Mar 2014 06:24:26 -0600
Date: Fri, 21 Mar 2014 06:24:24 -0600
Subject: Fwd: BLASER
Thread-Topic: BLASER
Thread-Index: Ac9FAH8o48EjJULkQCyOFAKdwwLLcQ==
Message-ID: <[email protected]<mailto:[email protected]>>
References: <[email protected]<mailto:[email protected]>>
Accept-Language: en-US
Content-Language: en-US
X-MS-Has-Attach:
X-MS-TNEF-Correlator:
acceptlanguage: en-US
Content-Type: multipart/alternative;
boundary="_000_2E7BF3C7D4A34BBE8DA45714401F4470xxxxxxcom_"
MIME-Version: 1.0

Hi,
Let’s try the following resolution:
Exchange 2007 server>EMC>server configuration>Hub Transport>Receive connector>properties>Network> add your new company server IP address in the tab “receive mail from remote servers that have these IP addresses”.
For more information, you can refer to the following article:
http://blogs.technet.com/b/exchange/archive/2006/12/28/3397620.aspx
If you have any question, please feel free to let me know.
Thanks,
Angela Shi
TechNet Community Support

Unable to connect to network with a new Laptop. ( WRT160n v3.0.02/3 and WRT54G2 v1.0.01)

Hello,
I have never had problems with a Linksys router before until I recently got a new laptop. It was fine for the first few days, but then the connection started dropping and wouldn't come back unless I turned off the router and back on. This started increasing in frequency, so I decided to tweak with my router to find the problem and see if I could solve it.
This was for a WRT160n v3.0.02 I looked up several suggestions online and decided to update the firmware to v3.0.03 This seemed to only make it worse as I could no longer connect, and when I turned the router off and back on it would allow me in for about a minute and drop me right away. I decided to do a factory reset and set up the network all over to see if this would fix it. Nothing.
I started tweaking with the settings, and came across some posts here such as this one, started tweaking with the channel settings and everything. Nothing. If anything I somehow made it worse since now instead of dropping repeatedly it wouldn't connect at all except for about a minute after restarting router, then it would drop completely (I would either get the limited access notification or I simply couldn't connect and windows said to unplug the access point. (...again)
Fed up, I recalled I had another Linksys router that I wasn't using in storage, a WRT54G2v 1.0.01 so I set that up, no problems... at first. All other devices picked it up right away, but once again, my new laptop decides it's too good for the freaking network and drops it repeatedly telling me there's a problem with the access point.
So at this point I'm thinking it might NOT be my network, but my wireless card or something, I uninstalled and reinstalled, updated drivers, (I use a Realtek RTL8723AE Wireless LAN 802.11n PCI-E NIC) I even came across this article and disabled browser service and NETBios (including all other devices on my network). It brought back the network on my laptop for a bit, only to smugly come crashing down again.
I've tried setting a static IP, I set my priority to highest on QoS, I've tried factory resetting both routers TWICE. I'm at my wits' end and I dunno what else to try, I'd greatly appreciate any help I can get.
I have a cable connection, modem works just fine, signal is fine if I connect it directly to modem, also if I connect it through the router, no problems whatsoever, the only problem seems to be the wireless on my new device. OTL

Hi roseyrosho,
You may try this link below on how to determine the correct MTU (Maximum Transmission Unit) size. I hope this will help.
Determining and setting up the correct MTU size

Itunes not finding my library after getting new laptop

Hi, I'm new to this so please bear with me. The laptop I was using to sync my iPod touch died last week and after I installed iTunes on my daughters laptop, I can't find any libraries or recently purchased music. If I try to sync my iPod to the new laptop, will it erase the music and playlists I already have on the iPod? Does anyone know why my recent music purchases aren't showing up in the iTunes folder? Thank in advance for any advice.

Try this to copy your data and settings:
Syncing to a new iTunes library or computer will erase your ipod. Only if you back up your ipod manually before syncing, you can restore your device from that backup again. A manual backup does not include the sync process.
Disable autosync in iTunes, connect your ipod to your new computer and right click on it in the device list and choose backup. iTunes will backup your ipod without syncing.
Transfer your purchases the same way, choosing "transfer purchases" this time.
When you connect your phone for the first time, all media content will be erased. But you can restore your settings and app data from your manual backup afterwards.
Don't forget to set up at least one contact and event on your new computer to be able to merge calendars and contacts when you sync the ipod for the first time.
Music is one way only, from the computer to your device, unless you bought the songs in itunes and transferred your purchases.
There is 3rd party software out there, but not supported by Apple, see this thread: http://discussions.apple.com/thread.jspa?threadID=2013615&tstart=0
About backups and what's saved:http://support.apple.com/kb/HT4946
How to back up and restore:http://support.apple.com/kb/HT1414
How to download apps for free again:http://support.apple.com/kb/HT2519
Saving other data is also described here. How to back up your data and set up as a new device

Maintaining operating concern after adding new value field

Hello,
I added a new value field to our live operating concern,maintained the data structure throguh KEA0(Maintain operating concern).The changes are transported from Development to Quality,Changes were reflected in Q system.After testing in Q system transports were pushed to production system.The new value field is added to the operating concern. When i check the log for KEA0 in production system it displayed one message like:
Field VV088 was added to the reference structure
Message no. KE782.You probably either changed the operating concern or SAP-EIS aspect, and added the field VV099 to the definition.
The added a CO-PA value field:
In this case, the field is added to the definition or the summarization levels. This invalidates all existing levels. Consequently, you need to activate them again and fill them with data.
In production system maintaining operating concenr or KEAO is only in display mode.Is it needed to regenerate the operating concern once again in production, how to do it. Is the message talking about the KEDV summarization levels.?
thanks
rahul

Hi,
No no ....KEDV is nothing to do here....that is creation of summarization in CO-PA.
Since you added new value field you necessarily have to Regenerate the operating concern...
Use Tcode KEA0...go to Environment tab...there the status of Cross client part and client specific part both will be in RED....now just click on the Cross client (candle button)...now the system would regenerate the operating concern...once it is over do the same for the client specific...
Beware when you do regenerate the operating concern no body can enter any transaction in that server since it is cross client table ...hence better do it after business hours.
Hope this helps!
Running KEDU with rebuild is relevant only when you already have created summarization and called up the same in the CO-PA report "options" tab. If you did not created the summarization you are nothing to do with KEDU.
Next: The new value field has to be transported to PRD and hence even in PRD we have to do the regeneration manually.
Regards,
Velumani
Message was edited by: Velumani Arunachalam
Message was edited by: Velumani Arunachalam

Any fix for random art and song order problems after adding new music?

If I sync my touch with itunes as a restore, all cover art, albums and playlists are correct. Once I add anything new or make a change and re-sync, random cover art is missing and random songs are in the wrong order. The only way to fix the problems is through a complete restore. Has anyone else had this problem or figured out a fix? I am using the latest itunes on a PC with XP.

A few issues, but sorry let me try to understand.
Adding new music, 'XXXX's iPod cannot be written or read'' can you let me know the number. most likely music format is not iPod Compatible like HE-AAC.
started skipping songs - these are normally due to corrupted ID3 tags, try converting them -File-> Advance -> IPOD version or use MP3 validator to fix all songs in the library. (My Apologies, only work for MP3 music that skipped)
As for item 2, you can try Hard Reset if you like to download MP3 validator.
After charging till full charge, at least 2 hours (preferably 4 hours)
Toggle the Hold switch, make sure you dont see the red mark when you do the next step
Reset the iPod -> Press Menu and Center button simultaneously for about 10 secs till the Apple Logo comes ON
Then release the buttons
Select your preferred language.
Here is the Apple support Article on the 5Rs
http://www.apple.com/support/ipod/five_rs/classic/
Good Luck!

IPod Classic fails to sync after adding new music

Hi, so lately I've been having problems with my 160GB classic, I've always had problems with it but its gotten to the point where I am frustrated beyond belief. SO the problem arises when I add new music, it comes up with the error 'XXXX's iPod cannot be written or read'' and before it displays this message the sync usually sticks on a song, a random song that I would've added. I restored it a few times, scanned and fixed it a few times and then when I noticed I started skipping songs, some in mid-song I restored it again and the problem repeats itself. Help would be appreciated

A few issues, but sorry let me try to understand.
Adding new music, 'XXXX's iPod cannot be written or read'' can you let me know the number. most likely music format is not iPod Compatible like HE-AAC.
started skipping songs - these are normally due to corrupted ID3 tags, try converting them -File-> Advance -> IPOD version or use MP3 validator to fix all songs in the library. (My Apologies, only work for MP3 music that skipped)
As for item 2, you can try Hard Reset if you like to download MP3 validator.
After charging till full charge, at least 2 hours (preferably 4 hours)
Toggle the Hold switch, make sure you dont see the red mark when you do the next step
Reset the iPod -> Press Menu and Center button simultaneously for about 10 secs till the Apple Logo comes ON
Then release the buttons
Select your preferred language.
Here is the Apple support Article on the 5Rs
http://www.apple.com/support/ipod/five_rs/classic/
Good Luck!

EVDRE error after adding new member - AFTER installing SQL 2008 R2 SP1 CU2

Hi guys.
We're seeing the same error as detailed in Link:[Re: EVDRE error AFTER expanding on a newly added member, sometimes....;
Basically, any new members that are added appear in the SQL tables, but throw out "EVDRE has encountered a problem..." when trying to use them.
Generally, this problem clear up if we leave the member overnight (although why this should be, I have no idea - the system does nothing extra overnight).
We have tried processing the cube, full processing of the application and even a server reboot, all to no avail.
However, the generally accepted fix for this is to upgrade SQL 2008 R2 to SP1 CU2 (SQL 10.50.2772)
This system was patched to that level before BPC was ever installed, precisely to avoid this problem.
This is not the first time that we have seen this behaviour.
I have experienced it in one other environment, which I keep meaning to rebuild.
These installations are in completely different environments. The only similarities are that they both use Windows Server 2008 R2 and SQL 2008 R2.
The issue only started to appear in this second environment today (we have 3 other environments with the same software version that do not have the problem).
It had been assumed before today that the first problematic environment might need a rebuild due to this issue being caused by some other factor.
However, this is now far too coincidental to be the case.
Has anyone seen similar issues even after patching to v10.50.2772, or does anyone have any suggestions at all.
I could really do with a quick win on this one.
Thanks

Hi,
i've had the same issue in the same days. I confirm that the issue appear after adding any member and it's clear overnight.
My system is different:
Windows Server 2008 NT 6.0 <X64> (Build 6002: Service Pack 2) Enterprise Edition
and Microsoft SQL Server 2008 Enterprise Edition (SP1) - 10.0.2841.0 (X64)
The issue appears in the last months.
It's occurs only on specific machine (always the same client), in the same moment other machines can open the same input schedule and expand without problem.
I've noted also that when I cancel the added member the issue disappear, the same behaviour with APShell.
I have the same configuration on development and test environment, same version of O.S. and SQL server, but there I don't have problem. The only difference is that these two environments are single server (application and DB server on the same machine) Instead, the production environment is multiserver (2 application server + DB server).
Maybe there is a service that take a long time for sincronization (it's triggered in the night?).
Could you verify if on some machine the evdre works fine and and that when you delete the added member evdre starts to work?
Kind regards
Roberto
Edited by: Roberto Vidotti on Dec 19, 2011 6:01 PM

Have backed up music to external device, downloaded Itunes to my new laptop, music wont play it askes for file

Have backed up my I Tunes music on external device, downloaded Itune program on my new laptop, transfered from external device, but music wont play without external device plugged in, it askes to locate original file when i try to play music without external device plugged in, please can you help

It sounds like you restored the library in a way which has the library assoicated with the tracks on the external rather than the internal drive. Did you perhaps use iTunes to consolidate to that drive before the transfer and copy the library files over independently?
I have script called FindTracks that can usually repair broken links, alternatively I might be able to guide you through some steps that would make the library on the external drive work as a self contained unit, and having done that you should be able to copy the library files to the internal drive to repair that one. See make a split library portable for details.
tt2

How to auto-update of script logics after adding new dimension members?

Hi Experts,
Just wanna ask if BPC has a functionality that would automatically update/validate and save my script logic whenever I add new dimension members. I've added new PL accounts but they are not automatically added to my calculated BS Net Income. I had to re-validate and save my logic for it to be included in my logic and for the amounts to be computed correctly.
Thanks,
Marvin

Hi Marvin,
There is no functionality as such. we need to configure the script as and when we make any changes in the dimension members.
Regards
Raman

Unable to Activate iMessage on MacPro after adding new SSD

Just added a SSD to my Mac Pro - wonderful speed-up having only System, Apps Library and User Folders on the drive!
Using Mountain Lion v 10.8.4
But Messages v 7.0.1 will no longer work.
On opening, it asks me to Enter Apple ID to activate iMessage.
It has pre-populated the Apple ID with my email address but when I enter the Password, it goes into cog-wheel mode and, after a delay, responds that it is unable to sign in asking me to check my network connection (it is working great for Mail, Safari etc)
I have double-checked the password (the same one allows me to enter the Apple Store and is effective on my Mac Book Pros. my iPhone & my iPad).
I used Clean My Mac to remove Messages (and its many folders), reinstalled Mountain Lion from a start-up flash drive I created, updated the system software and found a pristine version 7.0.1 of Messges in the Applications Folder.
But I still have the same problem.
Appreciate any suggestions.
...John
PS iMessages works great on my iPhone & iPad.
Messages(v 7.0.1) works great on my Mac Book Pro (running 10.8.4)

This could be a complicated problem to solve, as there are many possible causes for it. Test after taking each of the following steps that you haven't already tried. Back up all data before making any changes.
Before proceeding, test on another network, if possible. That could be a public Wi-Fi hotspot, if your computer is portable, or a cellular network if you have a mobile device that can share its Internet connection. If you find that iMessage works on the other network, the problem is in your network or at your ISP, not in your computer.
Step 1
Check the status of the service. If the service is down, wait tor it to come back up. There may be a localized outage, even if the status indicator is green.
Step 2
Restart your broadband device and your router, if different. You may have to skip this step if you don't control those devices.
Step 3
From the menu bar, select
 ▹ About This Mac
Below the "OS X" legend in the window that opens, the OS version appears. Click the version line twice to display the serial number. If the number is missing or obviously invalid, take the machine to an Apple Store or other authorized service center to have the problem corrected.
Step 4
Back up all data, then take the steps suggested in this support article.
There are five steps in that article. Please take all of them. If you don't understand some of the steps or can't carry them out, ask for guidance.
Step 5
From the menu bar, select
 ▹ System Preferences ▹ Network
If the preference pane is locked, click the lock icon in the lower left corner and enter your password to unlock it. Then click the Advanced button and select the Proxies tab. If any proxy options are selected, make a note of them and then deselect them. You don’t need to change the bypass or FTP settings. Click OK and then Apply. Test. The result may be that you can't connect to any web server. Restore the previous settings if that happens.
Step 6
Reset the NVRAM.
Step 7
Enable guest logins* and log in as Guest. Don't use the Safari-only “Guest User” login created by “Find My Mac.”
While logged in as Guest, you won’t have access to any of your personal files or settings. Applications will behave as if you were running them for the first time. Don’t be alarmed by this; it’s normal. If you need any passwords or other personal data in order to complete the test, memorize, print, or write them down before you begin.
Test while logged in as Guest. After testing, log out of the guest account and, in your own account, disable it if you wish. Any files you created in the guest account will be deleted automatically when you log out of it.
*Note: If you’ve activated “Find My Mac” or FileVault, then you can’t enable the Guest account. The “Guest User” login created by “Find My Mac” is not the same. Create a new account in which to test, and delete it, including its home folder, after testing.
If iMessage worked in the guest account, stop here and post your results.
Step 8
Boot in safe mode and log in. Note: If FileVault is enabled, or if a firmware password is set, or if the boot volume is a software RAID, you can’t do this. Ask for further instructions.
Safe mode is much slower to boot and run than normal, and some things won’t work at all, including Wi-Fi on certain iMacs. The next normal boot may also be somewhat slow.
The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
Test while in safe mode. After testing, reboot as usual (i.e., not in safe mode) and test again.
If iMessage worked in safe mode, but didn't work when you booted out of safe mode, stop here and post your results.
Step 9
According to one anecdotal report, Flash Player may interfere with iMessage, though I don't know how and can't confirm. To test this theory, select from the menu bar
 ▹ System Preferences… ▹ Flash Player ▹ Storage
and click
Block all sites from storing information on this computer
Close the preference pane. If this action solves the problem, please post your results.
Step 10
Reinstall OS X.
Step 11
If none of the above steps resolves the issue, make a "Genius" appointment at an Apple Store, or contact Apple Support.

Persistence-rebalance is not working after adding new cotexts

Hi,
I had the following problem.
The customer has two ACE20 modules. These modules are configured with some contexts. These contexts are configured and working. Last week I created and configured new three contexts without modifying current contexts. After this change, the customer had a problem with cookie insertion in the one of the current cotext. There was no configuration change (the persistence-rebalance map was configured and assigned to the policy-map) in this context. Only one solution of this problem was removing and adding again the parameter map into policy map. After this change the cookie insertion is working well. So it seems like a bug, but I didn't find it in the bug toolkit. Is this behaviour correct?
Thanks
Roman

Try deleting it and downloading it again.
-------------------If this post helped you, click on accept as solution.------------------
-----------------------------Appreciate by clicking on white star.----------------------------

How do I reset airport extreme A1408 to use on different network after buying new Extreme?

I have just bought and set up new Airport ExtremeA1521 and want to take my old one and set up at son's. It is A1408. Will doing a reset do all I need to do? And then I want to hook up an Express to it to extend his network.
Thanks.

Power up the old AirPort Extreme for a minute or two, then hold in the reset button on the device for 8-10 seconds and release. Allow a full minute for the AirPort Extreme to restart back to a slow, blinking amber light status.
The network settings on the AirPort Extreme are now reset back to factory defaults, and you can now set up the AirPort Extreme to create a new network with a network name and password of your choice.
Then, the Express can be set up to extend the network. If you have a new Express, it will already be set to factory defaults, so all that is needed is that device be set up to connect to the AirPort Extreme. If the Express has been previously set up, then it will first need to be reset back to factory default settings, before it can be set up again to extend the AirPort Extreme network.

Unnamed Device in Network after adding new Laptop

Similar Messages

Maybe you are looking for