Persistence-rebalance is not working after adding new cotexts

Hi,
I had the following problem.
The customer has two ACE20 modules. These modules are configured with some contexts. These contexts are configured and working. Last week I created and configured new three contexts without modifying current contexts. After this change, the customer had a problem with cookie insertion in the one of the current cotext. There was no configuration change (the persistence-rebalance map was configured and assigned to the policy-map) in this context. Only one solution of this problem was removing and adding again the parameter map into policy map. After this change the cookie insertion is working well. So it seems like a bug, but I didn't find it in the bug toolkit. Is this behaviour correct?
Thanks
Roman

Try deleting it and downloading it again.
-------------------If this post helped you, click on accept as solution.------------------
-----------------------------Appreciate by clicking on white star.----------------------------

Similar Messages

Autocomplete does not work after adding controller to LOV

Hi experts ,
Autocomplete does not work after adding controller to LOV Region, i have checked the fnd_compatialbe mode it is fine.validation proprty is also false, stilll it is not working.
can anyone help me its very urgent
regards
vamsi

Hi Tapash,
This resolved the problem. Many thanks for your help with this it has been driving me mad for the last few days.
I could not understand why the standard Apps LOV regions had controller's attached to them and the autocomplete would function but with my pages it would not.
I actually raised a TAR about this and got nothing back so have updated it with the resolution.
Thanks again.
Regards,
David

HT4623 my phone main button not working after installed new version software 7.0.6

my phone main button not working after installed new version software 7.0.6

Arrange some liquid like petrol spirit and w 40
two drops in to home button.
30 times press slowly slowly and then restart your apply iphone.
You will get ready.
I am sure. Thanking you...

EDIT method doesn't work after adding new row

I would like to start editing after adding new row into TableView.
I copied example from Oracle website: [Using JavaFX UI Controls - 13 Table View|http://docs.oracle.com/javafx/2/ui_controls/table-view.htm#CJAGDAHE]. Then I put additional button for adding new row and define action for the button.
    final Button addButton = new Button("Add");
    addButton.setOnAction(new EventHandler<ActionEvent>() {
        @Override
        public void handle(ActionEvent arg0) {
            Person p = new Person("", "", "");
            table.getItems().add(p);
            table.getSelectionModel().select(p);
            table.edit(table.getSelectionModel().getSelectedIndex(), table.getColumns().get(2));
    });In result I can see selected new row but the table doesn't start edditing in the third column.
I have similar method for editing existing rows and it works properly.
    final Button editButton = new Button("Edit");
    editButton.setOnAction(new EventHandler<ActionEvent>() {
        @Override
        public void handle(ActionEvent arg0) {
            table.edit(table.getSelectionModel().getSelectedIndex(), table.getColumns().get(2));
    });Could you help me what I do wrong?

Try wrapping the setCaretPosition(...) method in a SwingUtilities.invokeLater(...)
caret=outputArea.getDocument().getText(0,outputArea.getDocument().getLength()).length();Should be:
caret = outputArea.getDocument().getLength();

Wifi connection with 4s not working after installing new software ios6

wifi connection with 4s not working after installing ios 6.

Go to Settings > WiFi > Select your network and hit the right arrow to "Forget Network"
Then go to Settings > General > Reset Network Settings and try connecting again when the phone restarts.

Iphoto not working after updating new iPhoto

Can anyone help. I just updated my iphoto and now its not working. here is the mess. This is after I had a problem with the new iphoto.
Thanks
Process:         iPhoto [1898]
Path:            /Applications/iPhoto.app/Contents/MacOS/iPhoto
Identifier:      com.apple.iPhoto
Version:         9.2.1 (9.2.1)
Build Info:      iPhotoProject-628000000000000~3
Code Type:       X86 (Native)
Parent Process: launchd [120]
Date/Time:       2011-11-04 22:24:56.569 -0400
OS Version:      Mac OS X 10.7.2 (11C74)
Report Version: 9
Interval Since Last Report:          503556 sec
Crashes Since Last Report:           30
Per-App Crashes Since Last Report:   30
Anonymous UUID:                      DB20AA9A-F8FC-4BAD-A47D-C0F0EFA89391
Crashed Thread: 0
Exception Type: EXC_BREAKPOINT (SIGTRAP)
Exception Codes: 0x0000000000000002, 0x0000000000000000
Application Specific Information:
dyld: launch, loading dependent libraries
Dyld Error Message:
Library not loaded: /Library/Frameworks/iLifeFaceRecognition.framework/Versions/A/iLifeFaceRecognit ion
Referenced from: /Applications/iPhoto.app/Contents/MacOS/iPhoto
Reason: image not found
Binary Images:
    0x1000 -   0xd1afeb com.apple.iPhoto (9.2.1 - 9.2.1) <68601E93-E4CF-3B4C-AFFD-4781A92DD58B> /Applications/iPhoto.app/Contents/MacOS/iPhoto
0xe83000 -   0xf63fe7 org.python.python (2.6.7 - 2.6.7) <61DBA92A-C39A-3A52-86F2-59CF9D310CB4> /System/Library/Frameworks/Python.framework/Versions/2.6/Python
0xfae000 - 0x114effb com.apple.geode (1.5 - 151.51) <28D29759-F356-3608-B9CF-3031F3299B1B> /Applications/iPhoto.app/Contents/Frameworks/Geode.framework/Versions/A/Geode
0x11ee000 - 0x11f0fff com.apple.iLifePhotoStreamConfiguration (2.2 - 2.2) <4FA61CE9-1718-3E07-9896-0023A2A49699> /Applications/iPhoto.app/Contents/Frameworks/iLifePhotoStreamConfiguration.fram ework/Versions/A/iLifePhotoStreamConfiguration
0x11f6000 - 0x1205fff com.apple.iLifeAssetManagement (2.0 - 2.33) <8346DE35-5F86-3338-9913-B035B3EE5435> /Applications/iPhoto.app/Contents/Frameworks/iLifeAssetManagement.framework/Ver sions/A/iLifeAssetManagement
0x1212000 - 0x123affb com.apple.iPhoto.Tessera (1.1 - 60.10) <7BA9184E-0A00-3083-8322-772ECBDD30C9> /Applications/iPhoto.app/Contents/Frameworks/Tessera.framework/Versions/A/Tesse ra
0x124b000 - 0x1272ffb com.apple.iPhoto.Tellus (1.3 - 60.10) <4AABB0BC-AC97-3EE4-BF0F-D8499DDB57C0> /Applications/iPhoto.app/Contents/Frameworks/Tellus.framework/Versions/A/Tellus
0x1287000 - 0x1291fff com.apple.iphoto.AccountConfigurationPlugin (1.2 - 1.2) <3B68F126-D783-3F86-AF04-A0F6A459BE67> /Applications/iPhoto.app/Contents/Frameworks/AccountConfigurationPlugin.framewo rk/Versions/A/AccountConfigurationPlugin
0x8fe6e000 - 0x8fea09c7 dyld (195.5 - ???) <BCC83F99-7244-3DBA-867D-6226D53DD9F2> /usr/lib/dyld
Model: iMac7,1, BootROM IM71.007A.B03, 2 processors, Intel Core 2 Duo, 2 GHz, 2 GB, SMC 1.20f4
Graphics: ATI Radeon HD 2400 XT, ATI,RadeonHD2400, PCIe, 128 MB
Memory Module: BANK 0/DIMM0, 1 GB, DDR2 SDRAM, 667 MHz, 0xAD00000000000000, 0x48594D503531325336344350382D59352020
Memory Module: BANK 1/DIMM1, 1 GB, DDR2 SDRAM, 667 MHz, 0xAD00000000000000, 0x48594D503531325336344350382D59352020
AirPort: spairport_wireless_card_type_airport_extreme (0x14E4, 0x88), Broadcom BCM43xx 1.0 (5.10.131.36.11)
Bluetooth: Version 4.0.1f4, 2 service, 18 devices, 1 incoming serial ports
Network Service: AirPort, AirPort, en1
Serial ATA Device: Hitachi HDT725025VLA380, 250.06 GB
Parallel ATA Device: MATSHITADVD-R   UJ-875
USB Device: Photosmart C4200 series, 0x03f0 (Hewlett Packard), 0x5c11, 0xfa200000 / 2
USB Device: Built-in iSight, apple_vendor_id, 0x8502, 0xfd400000 / 3
USB Device: Keyboard Hub, apple_vendor_id, 0x1006, 0xfd100000 / 2
USB Device: Apple Keyboard, apple_vendor_id, 0x0220, 0xfd120000 / 4
USB Device: IR Receiver, apple_vendor_id, 0x8242, 0x5d100000 / 2
USB Device: Bluetooth USB Host Controller, apple_vendor_id, 0x8206, 0x1a100000 / 2

iPhoto is missing part of the substructure it needs to run. You need to reinstall.
To re-install iPhoto
1. Put the iPhoto.app in the trash (Drag it from your Applications Folder to the trash)
2a: On 10.5: Go to HD/Library/Receipts and remove any pkg file there with iPhoto in the name.
2b: On 10.6: Those receipts may be found as follows: In the Finder use the Go menu and select Go To Folder. In the resulting window type
/var/db/receipts/
2c: on 10.7 they're at
/private/var/db/receipts
A Finder Window will open at that location and you can remove the iPhoto pkg files.
3. Re-install.
If you purchased an iLife Disk, then iPhoto is on it.
If iPhoto was installed on your Mac when you go it then it’s on the System Restore disks that came with your Mac. Insert the first one and opt to ‘Install Bundled Applications Only.
If you purchased it on the App Store you can find it in your Purchases List.

Flash Player not working after downloading new version

I downloaded Flash Player 10 and it does not work.I am using Windows XP and Internet Explorer. I have tried the trouble shooting. I have made sure its enabled under Active X and it does not work at all now. I have tried to download Flash Player 9 and now that will not download. I regularly use site that require Flash and I am shut down until I can figure out what is wrong. Please help.

I have the same issue after I was prompted yesterday to upgrade my Flash player. With the new version, 2/3 of Flash pages do not work. But 1/3 do work !
Example of page that does not work with new version of Flash :
http://www.youtube.com/ (the whole site)
http://www.adobe.com/fr/products/flashplayer/ (Adobe's official Flash page !)
Example of page that does work with new version of Flash :
http://www.voleursdechevaux.be/page_flash.html
On first glance, I would say that Flash loaded through JavaScript fails. Only Flash embedded through HTML works. But I am not competent enough to discover why.
Here is my current configuration (the version test at http://kb2.adobe.com/cps/155/tn_15507.html works well) :
Player Version : WIN 10.0.22.87
Debug Player : no
Operating System : Vista
Browser : Internet Explorer 8
Locale : French

VPN not working after adding subinterface - ASA 5510

Hello,
Currently I want to add a second lan (vlan) in a customers network. The new network will be for a wireless infrastructure.
There is also VPN Configured on the ASA - One with L2TP for Windows Clients and an IPsec for Cisco Clients.
Former we only had one outside (Eth0/0) and one inside interface (Eth0/1) on the ASA.
Now I want to use the Eth0/2 with subinterfaces, so that we will be flexible for future, when deploying more vlans.
But now, when i turn the first subinterface Eth0/2.2 to no-shut the VPN Connections does not work any more.
Bulding up the VPN connection works, but it seems that the traffic is not tunneled. (I checked this, because tracert to an internal adress goes to the internet)
Below there is my config, i don't know whats wrong. I think split-tunnel is configured correctly (because it works when i delete eth0/2.2)
TREV is the network of this location.
Company1,2,3 are remote locations.
: Saved
ASA Version 8.2(5)
hostname XXXXXXX
domain-name domain.lan
enable password XXXXXXXXXXX encrypted
passwd XXXXXXXXXX encrypted
names
name 192.168.100.0 TREV
name 192.168.200.0 COMPANY3
name XXXXXXXX Company1
name 192.168.1.0 Company2
name XXXXXXXXX GCT
name XXXXXXXX BMD
name 192.168.110.0 Wireless
name 192.168.201.0 COMPANY3-VPN
name 192.168.11.0 COMPANY2-VPN
name 192.168.101.0 TREV-VPN
interface Ethernet0/0
description Outside
nameif outside
security-level 0
ip address XXXXX 255.255.255.248
interface Ethernet0/1
description Inside
nameif inside
security-level 100
ip address 192.168.100.1 255.255.255.0
interface Ethernet0/2
description Trunk Interface
no nameif
no security-level
no ip address
interface Ethernet0/2.2
description Wireless
vlan 110
nameif wlan
security-level 100
ip address 192.168.110.1 255.255.255.0
interface Ethernet0/3
shutdown
no nameif
no security-level
no ip address
interface Management0/0
nameif management
security-level 100
ip address 192.168.1.1 255.255.255.0
management-only
ftp mode passive
dns domain-lookup inside
dns server-group DefaultDNS
name-server 192.168.100.10
domain-name domain.lan
dns server-group COMPANY2
name-server 192.168.1.16
domain-name domain.local
dns server-group COMPANY3
name-server 192.168.200.1
domain-name domain.local
same-security-traffic permit inter-interface
same-security-traffic permit intra-interface
object-group network VPN_Networks
network-object COMPANY3 255.255.255.0
network-object COMPANY3-VPN 255.255.255.0
network-object COMPANY2 255.255.255.0
network-object COMPANY2-VPN 255.255.255.0
network-object TREV 255.255.255.0
network-object TREV-VPN 255.255.255.0
object-group network DM_INLINE_NETWORK_1
network-object COMPANY2 255.255.255.0
network-object COMPANY3 255.255.255.0
network-object COMPANY3-VPN 255.255.255.0
network-object COMPANY2-VPN 255.255.255.0
network-object Wireless 255.255.255.0
access-list INCOMING remark *** ICMP Erlauben ***
access-list INCOMING extended permit icmp any any echo-reply
access-list INCOMING extended permit icmp any any time-exceeded
access-list INCOMING extended permit icmp any any unreachable
access-list INCOMING extended permit icmp any any parameter-problem
access-list INCOMING extended permit icmp any any source-quench
access-list INCOMING extended permit icmp any any echo
access-list INCOMING remark *** Wartung Company1 ***
access-list INCOMING remark *** Wartung BMD ***
access-list INCOMING remark *** Mail ***
access-list ......
access-list Trev-nat0 remark *** NoNat ***
access-list Trev-nat0 extended permit ip TREV 255.255.255.0 object-group VPN_Networks
access-list Trev-nat0 extended permit ip object-group VPN_Networks TREV 255.255.255.0
access-list Trev-nat0 extended permit ip TREV 255.255.255.0 object-group DM_INLINE_NETWORK_1
access-list DefaultRAGroup_splitTunnelAcl standard permit TREV 255.255.255.0
access-list outside_1_cryptomap extended permit ip TREV 255.255.255.0 object-group DM_INLINE_NETWORK_1
access-list inside_debug extended permit tcp any host 192.168.100.5
access-list inside_debug extended permit tcp any TREV 255.255.255.0
access-list Wireless-nat0 extended permit ip Wireless 255.255.255.0 TREV 255.255.255.0
pager lines 24
logging asdm informational
mtu outside 1500
mtu inside 1500
mtu management 1500
mtu wlan 1500
ip local pool VPN-Pool 192.168.101.1-192.168.101.31 mask 255.255.255.0
no failover
icmp unreachable rate-limit 1 burst-size 1
asdm image disk0:/asdm-645.bin
no asdm history enable
arp timeout 14400
global (outside) 1 interface
global (outside) 2 XXXXXXXXXXX
nat (inside) 0 access-list Trev-nat0
nat (inside) 2 192.168.100.25 255.255.255.255
nat (inside) 2 192.168.100.250 255.255.255.255
nat (inside) 1 TREV 255.255.255.0
nat (wlan) 0 access-list Wireless-nat0
static (inside,outside) tcp interface 444 192.168.100.10 444 netmask 255.255.255.255
static (inside,outside) tcp interface https 192.168.100.10 https netmask 255.255.255.255
.... a lot of statics..............
static (inside,outside) tcp XXXXXXXXXX pop3 192.168.100.25 pop3 netmask 255.255.255.255
static (inside,outside) tcp XXXXXXXXXX 995 192.168.100.25 995 netmask 255.255.255.255
access-group INCOMING in interface outside
route outside 0.0.0.0 0.0.0.0 XXXXXXXXXX 1
timeout xlate 3:00:00
timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
timeout sunrpc 0:10:00 h323 0:05:00 h225 1:00:00 mgcp 0:05:00 mgcp-pat 0:05:00
timeout sip 0:30:00 sip_media 0:02:00 sip-invite 0:03:00 sip-disconnect 0:02:00
timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute
timeout tcp-proxy-reassembly 0:01:00
timeout floating-conn 0:00:00
dynamic-access-policy-record DfltAccessPolicy
aaa-server RADIUS protocol radius
aaa-server RADIUS (inside) host 192.168.100.10
timeout 5
key *****
radius-common-pw *****
aaa-server RADIUS2 protocol radius
aaa-server RADIUS2 (inside) host 192.168.100.10
key *****
radius-common-pw *****
aaa authentication ssh console LOCAL
http server enable 4430
http COMPANY2 255.255.255.0 management
http TREV 255.255.255.0 inside
http Company1 255.255.255.224 outside
http 0.0.0.0 0.0.0.0 outside
no snmp-server location
no snmp-server contact
snmp-server enable traps snmp authentication linkup linkdown coldstart
crypto ipsec transform-set ESP-AES-128-MD5 esp-aes esp-md5-hmac
crypto ipsec transform-set ESP-AES-192-SHA esp-aes-192 esp-sha-hmac
crypto ipsec transform-set ESP-AES-192-MD5 esp-aes-192 esp-md5-hmac
crypto ipsec transform-set ESP-AES-256-SHA esp-aes-256 esp-sha-hmac
crypto ipsec transform-set ESP-AES-256-MD5 esp-aes-256 esp-md5-hmac
crypto ipsec transform-set ESP-3DES-MD5 esp-3des esp-md5-hmac
crypto ipsec transform-set ESP-DES-SHA esp-des esp-sha-hmac
crypto ipsec transform-set ESP-DES-MD5 esp-des esp-md5-hmac
crypto ipsec transform-set TRANS_ESP_3DES_MD5 esp-3des esp-md5-hmac
crypto ipsec transform-set TRANS_ESP_3DES_MD5 mode transport
crypto ipsec transform-set TRANS_ESP_3DES_SHA esp-3des esp-sha-hmac
crypto ipsec transform-set TRANS_ESP_3DES_SHA mode transport
crypto ipsec transform-set ESP-AES-128-SHA esp-aes esp-sha-hmac
crypto ipsec transform-set TRANS_ESP_AES_128_SHA esp-aes esp-sha-hmac
crypto ipsec transform-set TRANS_ESP_AES_128_SHA mode transport
crypto ipsec transform-set TRANS_ESP_AES_256_SHA esp-aes-256 esp-sha-hmac
crypto ipsec transform-set TRANS_ESP_AES_256_SHA mode transport
crypto ipsec transform-set ESP-3DES-SHA esp-3des esp-sha-hmac
crypto ipsec security-association lifetime seconds 28800
crypto ipsec security-association lifetime kilobytes 4608000
crypto dynamic-map SYSTEM_DEFAULT_CRYPTO_MAP 65535 set transform-set ESP-AES-128-SHA ESP-AES-128-MD5 ESP-AES-256-SHA ESP-AES-256-MD5 ESP-3DES-SHA ESP-3DES-MD5 TRANS_ESP_AES_128_SHA TRANS_ESP_AES_256_SHA TRANS_ESP_3DES_MD5 TRANS_ESP_3DES_SHA
crypto map outside_map 1 match address outside_1_cryptomap
crypto map outside_map 1 set pfs group1
crypto map outside_map 1 set peer 178.188.202.78
crypto map outside_map 1 set transform-set ESP-3DES-SHA
crypto map outside_map 65535 ipsec-isakmp dynamic SYSTEM_DEFAULT_CRYPTO_MAP
crypto map outside_map interface outside
crypto isakmp enable outside
crypto isakmp policy 10
authentication pre-share
encryption 3des
hash md5
group 2
lifetime 86400
crypto isakmp policy 20
authentication pre-share
encryption des
hash sha
group 5
lifetime 28800
crypto isakmp policy 30
authentication pre-share
encryption 3des
hash sha
group 5
lifetime 86400
crypto isakmp policy 65535
authentication pre-share
encryption 3des
hash sha
group 2
lifetime 86400
telnet timeout 5
ssh bit-Studio 255.255.255.224 outside
ssh 0.0.0.0 0.0.0.0 outside
ssh TREV 255.255.255.0 inside
ssh timeout 60
console timeout 0
management-access inside
dhcpd address 192.168.1.2-192.168.1.254 management
dhcprelay server 192.168.100.10 inside
dhcprelay enable wlan
dhcprelay setroute wlan
dhcprelay timeout 90
threat-detection basic-threat
threat-detection statistics access-list
no threat-detection statistics tcp-intercept
webvpn
group-policy DefaultRAGroup internal
group-policy DefaultRAGroup attributes
wins-server value 192.168.100.10
dns-server value 192.168.100.10
vpn-tunnel-protocol IPSec l2tp-ipsec
split-tunnel-policy tunnelspecified
split-tunnel-network-list value DefaultRAGroup_splitTunnelAcl
default-domain value domain.lan
intercept-dhcp enable
group-policy IPsecVPN internal
group-policy IPsecVPN attributes
wins-server value 192.168.100.10
dns-server value 192.168.100.10
vpn-tunnel-protocol IPSec
split-tunnel-policy tunnelspecified
split-tunnel-network-list value DefaultRAGroup_splitTunnelAcl
default-domain value domain.lan
username admin password XXXXXXXXXX encrypted privilege 15
username vpntest password XXXXXXXXX nt-encrypted
tunnel-group DefaultRAGroup general-attributes
address-pool VPN-Pool
authentication-server-group RADIUS
default-group-policy DefaultRAGroup
tunnel-group DefaultRAGroup ipsec-attributes
pre-shared-key *****
tunnel-group DefaultRAGroup ppp-attributes
no authentication chap
authentication ms-chap-v2
tunnel-group XXXXXXXXX type ipsec-l2l
tunnel-group XXXXXXXXXXXX ipsec-attributes
pre-shared-key *****
tunnel-group IPsecVPN type remote-access
tunnel-group IPsecVPN general-attributes
address-pool VPN-Pool
authentication-server-group RADIUS
default-group-policy IPsecVPN
tunnel-group IPsecVPN ipsec-attributes
pre-shared-key *****
class-map inspection_default
match default-inspection-traffic
policy-map type inspect dns preset_dns_map
parameters
message-length maximum client auto
message-length maximum 512
policy-map global_policy
class inspection_default
inspect dns preset_dns_map
inspect ftp
inspect h323 h225
inspect h323 ras
inspect rsh
inspect rtsp
inspect sqlnet
inspect skinny
inspect sunrpc
inspect xdmcp
inspect sip
inspect netbios
inspect tftp
inspect ip-options
service-policy global_policy global
prompt hostname context
no call-home reporting anonymous
Cryptochecksum:f2041a5902e945a130fe25fbb8e5d368
: end

Hi,
First I would go through all the NAT0/NAT Exempt rules you have for VPNs. They seem to contain useless lines where either destination or source network isnt correct.
Lets look at the NAT0 ACL you have line by line
access-list Trev-nat0 extended permit ip TREV 255.255.255.0 object-group VPN_Networks
The above access-list has the correct source network configured Yet it has its destination addresses configured with an "object-group" which contains your LAN network
You should probably remove the LAN network from the object-group VPN_Networks
access-list Trev-nat0 extended permit ip object-group VPN_Networks TREV 255.255.255.0
To my understanding the above ACL line doesnt serve any purpose as the networks configured under VPN_Networks arent located behind your "inside" interface (Other than the one I'm asking to remove from the object-group)
access-list Trev-nat0 extended permit ip TREV 255.255.255.0 object-group DM_INLINE_NETWORK_1
The above ACL overlap with the very first ACL lines configurations and needlesly makes the configuration harder to read. It also contains the Wireless network which it shouldnt
I would suggest simplifying your NAT0 configurations for example in the following way (change the names if you want if youre going to try it out)
object-group network TREV-LAN
description Local networks
network-object 192.168.100.0 255.255.255.0
object-group network VPN-NETWORKS
description Remote networks
network-object 192.168.200.0 255.255.255.0
network-object 192.168.201.0 255.255.255.0
network-object 192.168.1.0 255.255.255.0
network-object 192.168.11.0 255.255.255.0
network-object 192.168.101.0 255.255.255.0
access-list TREV-LAN-NAT0 remark NAT0 / NAT Exempt for VPN Connections
access-list TREV-LAN-NAT0 permit ip object-group TREV-LAN object-group VPN-NETWORKS
With the above configurations
You have all NAT0 with a single line of access-list configuration (not counting the remark line as it doesnt affect anything)
If there is changes in the VPN pools, VPN remote networks or LAN networks you can simply change them under the configured object-groups instead of touching the actual ACL. There might be situations where you should change the ACL from the above if there is some bigger changes to network
So as I said, I would start with changing the above NAT configurations and then test the VPN again. If it doesnt work we will have to check some other things out.
- Jouni

Navigating through photos in single-photo view in iphoto with trackpad is not working after installing new OS Mountain lion

I have recently download new OS Mountain lion on my macbook (white late 2010 model). I had snow leopard before.
On iphoto, when i was viewing my photos in a single-photo view (double clicking on a photo), i was unable to go to the next photo/previous photo using my trackpad. Only way i could do this was by pressing arrow buttons on my key board.
If i remember correctly, i was able to do this by using 3 fingers (sliding left to right or sliding right to left) on snow leopard.
I can navigate back and foward on my internet browser using two fingers. And yes, i have tried using my two fingers on iphoto but nothing happens.
I have checked my trackpad setting and everything seems to be right.
Any ideas how i could fix this?
Thank You
p.s. i have iphoto 09

Terence Devlin wrote:
I can navigate back and foward on my internet browser using two fingers. And yes, i have tried using my two fingers on iphoto but nothing happens.
This works here - but I'm on iPhoto 11. IIRC it worked on 09 too though.
It's not working for me.

Finger Print Scanner is not working after downloading new operating system 8.1

hi,
recently i have installed new OS windows 8.1 for my HP PAVILION DV6 laptop, but my bluetooth and finger print scanner is not working. can any one suggest me solve my problem..
txs
best regards
karim

Hi @sam1211 ,
Thank you for visiting the HP Support Forums and Welcome. I have looked into your issue about your HP Pavilion dv6 Notebook and Bluetooth and HP Simplepass complications since doing a Windows upgrade. Here is a link to the HP Support Assistant. Just download and run the application. Just to make sure all drivers and software are updated as well.
Here is a document on troubleshooting and using Bluetooth if needed. Under the tips for finding a Bluetooth device, there is a section on making sure the wireless communication is turned on. This is an important section.
Here is another document with some great information about Bluetooth fixes.
Here is a link to troubleshoot the HP Simplepass software.
The HP SimplePass Identity Protection Software must be updated to v8.00.57 or later. Here is a link to download the latest. You will have to uninstall the old software.
Hope this helps you with the Bluetooth and HP Simplepass.
Thanks.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the bottom to say “Thanks” for helping!

Whatapp is not working after installing new softwa...

hi.. i am using nokia asha 311phone since last three months. fewdays back i got a phone software update on my mobile from nokia..so i installed it..after that whatsapp application is not working..plz tell me what should i do?????

Try deleting it and downloading it again.
-------------------If this post helped you, click on accept as solution.------------------
-----------------------------Appreciate by clicking on white star.----------------------------

Touchsceen will not work after installing new hard drive

Hello,
My HP TouchSmart 520 - 1047 c PC's hard drive crashed this week. I went out and purchased a new one, installed it, loaded my Windows 8 Pro disc in, and got it back working. The only issue so far is that my touchscreen will not work. HP support says it's a hardware issue and was no help.
Please help.
Thanks,
Mike

I have brought your issue to the attention of an appropriate team within HP. They will likely request information from you in order to look up your case details or product serial number. Please look for a private message from an identified HP contact. Additionally, keep in mind not to publicly post serial numbers and case details.
If you are unfamiliar with how the Forum's private message capability works, this post has instructions.
MechPilot
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the right to say “Thanks” for helping!

Java script will not work after creating new page

I am using dreamweaver cs3 and have a java script to rotate a banner in a template. This script has worked fine in the past when I created pages in Dreamwever. Now the script works fine only when I test it in a template but when I try to upload to my ISP the script will no longer work. At first I thought it was the ISP made changes but the person who sits next to me running the same version of Dreamweaver can create a page and the java works. The java is placed in a template, tested by viewing in a brower and it works, however once I try to create a new page using the template the scriipt will not work. To get around this I have the person sitting next to me save my template and then I can create pages. Also if I save the template with my pc and it updates the pages created by the template the java will no longer work.
This is very frustrating as I cannot create or modify my template on this pc. What would prevent this from working?

OK - now we are on to something ..... the script on the template only contains:
function randomImages(){
if(counter == (imgs.length)){
    counter = 0;
MM_swapImage('rotator', '', imgs[counter++]);
setTimeout('randomImages()', delay);
However when I create a new page from the template with this javascript in it the code changes to:
function randomImages(){
if(counter == (imgs.length)){
    counter = 0;
MM_swapImage('rotator', '', imgs[counter++]imgs[i]);
function randomImages(){
if(counter == (imgs.length)){
    counter = 0;
MM_swapImage('rotator', '', imgs[counter++]);
setTimeout('randomImages()', delay);

HDR is not working after a new installation of Photoshop

After a system crash of my computer I had to reinstall all programms. In the past I made a lot of HDR pictures, I will say I know what i have to do. But after the new installation of PS when I merge some photos with HDR pro the result is much more darker then the darkest of the braketing photos, and there is no way in the ACR (adobe camera raw) to get an acceptable result. I will show you screen prints:
Do you have a solution for this?
Many thanks...

Chmeva wrote:
It also makes "a lot of noise" ("a lot" in the sense that if I put it next to my ear I can hear a lot of clicking sounds from inside) while attempting to transfer songs/sync,
This normally, is a sign that your iPod Hardisk is dying. Do the iPod Disk Diagnostic as posted by tt2. it wont fix your problem, but it will help in troubleshooting.
Have a nice day!

Monitor not working after installing new memory in Mac Pro

I installed 4GB of new memory in my first generation Mac Pro following diagram. When I booted the monitor is black. The key board is working but not the monitor. I removed the new memory and tried again but same problem. Any suggestions on solving this problem would be greatly appreciated.

Well no one really buys from Apple and higher density goes into A1:2 then B1:2 and four DIMMs in those is best symmetrical configuration.
You say you tried xyz but not really very specific to me.
Some users doesn't tell much. However sometimes putting all the 512MB (not 500) on one Riser and the 4GB set on other has worked.
If it doesn't work with just the new RAM alone in A1:2 then it is bad or wrong and needs to go back.
And there have been 3-4 article changes on how to reset SMC. Yours has an SMC button. Leaving unplugged alone is a waste and almost useless. Hitting power button while unplugged was added in 2009.
And it could still be your GPU which is common - 7300 or X1900 or 8800GT... or...

Persistence-rebalance is not working after adding new cotexts

Similar Messages

Maybe you are looking for