Unsupported device type

After a power outage OSB has lost the ability to use two of its three tapes drives. I've hard rebooted the library. I've pulled the power cord on the library. The OSB server has been rebooted multiple times. I've tried putting the drives out of service and bringing them back up. When going to the Configure -> Device - Tape2 (or Tape3) I see this message at the top of the screen/
no hardware info is available for drive tape2 - unsupported device type (not tape or library)
no hardware info is available for drive tape3 - unsupported device type (not tape or library)
Transcripts of jobs show these errors:
Error: can't open device tape3 - device file not found (OB scsi device driver)
Error: can't open device tape2 - unsupported device type (not tape or library) (OB scsi device driver)
I'm not sure what to do. All the tape drives are the same so obviously the drivers exist. How do I get these drives working again?
Thanks.

What OS are you running?
It sounds like the device attach points have moved. If this is a Linux system then you can do "obtool lsdev -l" to see what /dev/sg entry your devices are looking at, and then do "sg_map -x -i" to see what /dev/sg your devices are really using. Then you can update the device attach points to point to the correct entry using "obtool chdev -a"
For example :
obtool lsdev -l
Drive0:
Device type: tape
Model: [none]
Serial number: 882E70020M
In service: yes
Library: L700
DTE: 1
Automount: yes
Query frequency: [undetermined]
Debug mode: no
Blocking factor: 512
Max blocking factor: 512
Current tape: [unknown]
Use list: all
Drive usage: 2 months, 1 week
Cleaning required: no
UUID: dddc4eaa-f143-102b-b28c-001ec9b5e6ee
Attachment 1:
Host: dukdaa01
Raw device: /dev/sg2
sg_map -x -i
/dev/sg0 0 0 32 0 13 DP BACKPLANE 1.05
/dev/sg1 0 2 0 0 0 /dev/sda DELL PERC 6/i 1.22
/dev/sg2 1 0 0 0 5 /dev/scd0 TEAC DVD-ROM DV28EV D.AE
/dev/sg3 3 0 0 1 1 /dev/nst0 IBM ULTRIUM-TD2 333K
obtool chdev -a dukdaa01:/dev/sg3 Drive0
Thanks
Rich

Similar Messages

Getting the error ORA-27001: unsupported device type

Hi ,
While I am starting to backup via RMAN I am getting the following error. I kept my backup files on my disk and configured the channel as
RMAN> SHOW DEFAULT DEVICE TYPE;
RMAN configuration parameters are:
CONFIGURE DEFAULT DEVICE TYPE TO DISK;
RMAN> restore tablespace user_undo;
Starting restore at 19-DEC-06
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03002: failure of restore command at 12/19/2006 17:00:36
ORA-19554: error allocating device, device type: DISC, device name:
ORA-27001: unsupported device type
When I checked in the v$backup_device its giving my the following result
SQL> SELECT * FROM V$BACKUP_DEVICE;
DEVICE_TYPE
DEVICE_NAME
SBT_TAPE
Could anyone please help me out.
Thanks

RMAN> SHOW DEFAULT DEVICE TYPE;
RMAN configuration parameters are:
CONFIGURE DEFAULT DEVICE TYPE TO DISK;
RMAN-03002: failure of restore command at 12/19/2006
17:00:36
ORA-19554: error allocating device, device type:
DISC, device name:> ORA-27001: unsupported device type
Is it possible that you have line similar to the following when you enter
show all;
CONFIGURE CHANNEL DEVICE TYPE DISC FORMAT <path>

ORA-19554: error allocating device, device type: TAPE, device name: ORA-270

Hi everyone, hit errors below when doing rman duplicate database, anyone can assist?
database mounted
released channel: ORA_AUX_DISK_1
allocated channel: ORA_AUX_DISK_1
channel ORA_AUX_DISK_1: SID=87 device type=DISK
released channel: ORA_AUX_DISK_1
restarting auxiliary database without server parameter file
Errors restarting database
RMAN-00600: internal error, arguments [6007] [] [] [] []
RMAN-03009: failure of allocate command on ORA_AUX_TAPE_1 channel at 03/14/2013 15:51:21
RMAN-10035: exception raised in RPC:
ORA-19624: operation failed, retry possible
ORA-19554: error allocating device, device type: TAPE, device name:
ORA-27001: unsupported device type
ORA-06512: at "SYS.X$DBMS_BACKUP_RESTORE", line 235
RMAN-10031: RPC Error: ORA-19624 occurred during call to DBMS_BACKUP_RESTORE.DEVICEALLOCATE
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03002: failure of Duplicate Db command at 03/14/2013 15:51:21
RMAN-05501: aborting duplication of target database
RMAN-03009: failure of allocate command on ORA_AUX_TAPE_1 channel at 03/14/2013 15:51:21
ORA-19554: error allocating device, device type: TAPE, device name:
ORA-27001: unsupported device type

Hi.
Tried but kenot...
This command will not work if if I execute in duplicate database?
I am now trying duplicate the database from a server to remote server.
using command below
DUPLICATE DATABASE TO NEW_DB_NAME
PFILE = PFILE_LOCATION
BACKUP LOCATION '/DUMP';
NOFILENAMECHECK;

WS-C2960S-48TS-L showing as unsupported device in CNA 5.5

I have set up a new switch, I can connect to it thru a web browser or telnet to it thru the network, but when I try to connect to it thru CNA 5.5 I can connect without a problem but it shows up as an unsupported device and I can't do any configurations to it. I am able to configure other 2950, 2960, and 3560 devices without an issue but this is the first 2960s model I have worked with. Is there an issue between CNA and this model that needs to be addressed? The 2960s is running the latest IOS.

seems like Cisco does not like answering any questions posted on here
Firstly, there are two types of people who posts here. They are people with issues/problems and those who can provide solutions. Now these people who provide solutions do not necessarily work for Cisco (just want to point it out). Cisco created this website to allow the sharing of informations and solutions for those who don't have, for instance, a Cisco TAC access. Unfortunately not everyone is an expert in every field (like me).
The Cisco 2960S is a fairly new product (released on April or May 2010, if I recall). However, if you look at the age of the latest version of Cisco Network Assistant (CNA), version 5.5, was released waaaaaaaaaaaaaaaaaaaaaaay back September 2009. This is like, in my humble opinion, using Office 2010 on a Windows 98 OS.
Another thing is that not all of us are avid users of CNA. We are "old school" and use the CLI to configure Cisco appliance as it's more robust and offers a helluvalot functionalities and features.
If contact your authorized Cisco reseller or Cisco SE, you can ask them when the next release for CNA will be.
This post is not meant to offend, criticize and/or insult anyone here. It's not meant to be demeaning, offensive or condescending. This post is just a personal opinion.
Hope this helps.

I have a new Toshiba Thrive tablet and do not see it on the list of tested, supported, or unsupported devices. Will Firefox work on my tablet?

I have a new Toshiba Thrive tablet and do not see it on the list of tested, supported, or unsupported devices. Will Firefox work on my tablet?

You should be able to find Firefox by searching for it in the Android market on the device.

ABAP list report wont print on Z device type with Z format

Our developer have created a report which outputs data in ABAP list format and the standard format would not fit. We have since created a custom format and copied a device type in to custom device type. So we now have a custom format and custom device type. However when we print, it spools correctly and shows as green but the report wont print. The only thing that gets printed is
"Sort criteria AscdgDescndSubtotalGRAND TOTAL : X X PROJ" "
The abap list format is Z_100_500. Basically the report has 450 columns and hence we created this format.
I am not sure what this means. I have been advised by SAP to follow instruction on note 17895 - Adapting print list formats for customers however i cant fully comprehend point 5 of the note and I believe this is why it wont print. Has anyone adapted ABAP list using this note. Can you please let me know how i should go about printer initialisation mentioned in the noted.
We have checked everything however dont seem to get around the issue. Any ideas will be appreciated

No comments

Getting 415 Unsupported Media Type error when calling a windows web service

I have a BPEL process that invokes a windows web service. This process is working currently on the production system. When trying to run the process in a new test clustered environment, I'm getting the error below (bolded).
We're using 10.1.3.3 Oracle Application Server and BPEL. Please advise on what config files might need to be tweaked to fix this.
InvokeWindowsLoggingWebService(faulted)
[2010/04/16 17:26:35] Faulted while invoking operation "WriteLog" on provider "WindowsLoggingWebService". less
-<messages>
-<input>
-<InvokeWindowsLoggingWebService_InputVariable>
-<part xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" name="parameters">
-<WriteLog xmlns="http://tempuri.org/">
<FileAbsolutePath>
R:\CV & RM\upload_from_test.log
</FileAbsolutePath>
<Content>
||*************************************************************************************|Append to log file 2010-04-16T16:57:08-04:00|*************************************************************************************||START DATE: 2010-04-16T16:57:08-04:00|END DATE: 2010-04-16T17:25:58-04:00|COUNT: 106|TRANSFER OF FILES TO TAS SUCCESSFUL
</Content>
<NewLineDelimiter>
|
</NewLineDelimiter>
</WriteLog>
</part>
</InvokeWindowsLoggingWebService_InputVariable>
</input>
-<fault>
-<remoteFault xmlns="http://schemas.oracle.com/bpel/extension">
-<part name="summary">
<summary>
exception on JaxRpc invoke: HTTP transport error: javax.xml.soap.SOAPException: java.security.PrivilegedActionException: javax.xml.soap.SOAPException: Bad response: 415 Unsupported Media Type
</summary>
</part>
</remoteFault>
</fault>
</messages>
[2010/04/16 17:26:35] "{http://schemas.oracle.com/bpel/extension}remoteFault" has been thrown. less
-<remoteFault xmlns="http://schemas.oracle.com/bpel/extension">
-<part name="summary">
<summary>
exception on JaxRpc invoke: HTTP transport error: javax.xml.soap.SOAPException: java.security.PrivilegedActionException: javax.xml.soap.SOAPException: Bad response: 415 Unsupported Media Type
</summary>
</part>
</remoteFault>

I generated a proxy service in jdev and used the same parms as was done on OAS...
<WriteLog xmlns="http://tempuri.org/">
<FileAbsolutePath>
R:\CV & RM\upload_from_test.log
</FileAbsolutePath>
<Content>
||*************************************************************************************|Append to log file 2010-04-16T16:57:08-04:00|*************************************************************************************||START DATE: 2010-04-16T16:57:08-04:00|END DATE: 2010-04-16T17:25:58-04:00|COUNT: 106|TRANSFER OF FILES TO TAS SUCCESSFUL
</Content>
<NewLineDelimiter>
|
</NewLineDelimiter>
</WriteLog>
and was able to call the service fine and it returned successful. Just seems to be an issue on the server when I execute it from there.

Help HP LaserJet 600 Device type

Hello everyone,
I've had a problem finding the device type for the following printers:
- HP LaserJet Enterprise 600 M601n
- HP LaserJet Enterprise 600 M603dn
I've checked in HP web page, I've checked Note 8928 and still havent found the device types. Can anybody help me?
Thanks,
Beatriz

Hello,
Check the following link:
http://h71028.www7.hp.com/enterprise/downloads/HPPrinterSAP-DT2011.pdf
http://h71028.www7.hp.com/enterprise/cache/37011-0-0-225-121.html
You can use Device type ZHPLJCM1, and also you can try device type SAPWIN.
Regards,
David

CiscoWorks user options "device type groups|switch and Hubs"

Hi,
We are using CiscoWorks software to deploy new configuration to our network devices. Because our environnement is mixed about version of network devices we have to create a new netconfig job for each device model, because in some plate-forme configuration option, syntax maybe different of each other.
When I create a new netconfig job with my username under "device type groups|switch and Hubs" I have a list there of all plate-forme we have in our production environnement managed by CiscoWorks software. I know thoses group was'nt define by on of us and thoses are define by default in CiscoWorks software, but they are hiden by default per user basic.
We have a new one in our team, I had created his user name and password, but I can find the option where I can asked to make visible to him plate-form device type group as I have in my user configuration.
Also, is it possible to copy private define group to an other user without to make thoses as public ?
Thanks a lot !

Here,
is a view of what I have with my user
but in his profile he is only see
Device type Groups
     + Routers
     + Switches and Hubs
     + Wireless
if he clic on the plus sing to develop group "Switches and Hubs" he see all switches and hub managed by CiscoWorks software. I know He did not create Cisco Catalyst 2912 XL Switch and Cisco Catalyst 2924 XL Switch group in my profile. I know we have to modify an option in CiscoWorks per user basic to view those group, the person who where that option should be modifiy is currently in vacation, but he will need that option enable before our specialist will be back !
Thanks a lot !

Device type to be used for Zebra 220XiIII Printer

Hello All,
We are printing labels from SAP to the printer Zebra 220XiIII Printer using Adobe Print forms technology. When configuring the printer, we used the device type as PDF1. The print was fine in terms of data display and positioning of the text and barcodes but the issue is that it takes 30secs. to print each label. This was not acceptable as it is creating delays in Shipment.
To address the issue we changed the device type to LZEB3. The print was fast i.e., in 20 seconds the printer was able to print 5 labels but the font on the label is increased automatically because of which the data on the label is truncated.
Does any one have any ideas on what is the device type to be used and is there any specific font to be used?
Please note that we desinged the forms using ADOBE FORMS TECHNOLOGY. There are many notes in Service market place which are specific to Smart forms. Please come up with your ideas.
Regards,
Praveen T

Hi Florian,
Thank you for your response. We were able to fix the issue by changing the Device type to LZEB2.
For some reason YZB200, YZB300 and other device types which we found in the device type wizard did not work in our case. We did not investigate the reason as LZEB2 worked and we have time crunch
Regards,
Praveen T

ADAPTER.HTTP_EXCEPTION - HTTP 415 Unsupported Media Type

Hi All,
We have a Proxy to SOAP scenario which is throwing the below response.
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
- 
- <SAP:Error SOAP:mustUnderstand="1" xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/">
<SAP:Category>XIAdapterFramework</SAP:Category>
<SAP:Code area="MESSAGE">GENERAL</SAP:Code>
<SAP:P1 />
<SAP:P2 />
<SAP:P3 />
<SAP:P4 />
<SAP:AdditionalText>com.sap.engine.interfaces.messaging.api.exception.MessagingException: SOAP: response message contains an error XIAdapter/HTTP/ADAPTER.HTTP_EXCEPTION - HTTP 415 Unsupported Media Type</SAP:AdditionalText>
<SAP:Stack />
<SAP:Retry>M</SAP:Retry>
</SAP:Error>
We have used XSLT mapping and also used the Message transform bean (ocalejbs/AF_Modules/MessageTransformBean) with the module parameters.
Please help.

this is the Audit log... Just in case this helps..
20.10.2011 09:57:34 Information Transform: successfully transformed
20.10.2011 09:57:34 Information MP: processing local module localejbs/sap.com/com.sap.aii.af.soapadapter/XISOAPAdapterBean
20.10.2011 09:57:34 Information SOAP: request message entering the adapter with user J2EE_GUEST
20.10.2011 09:57:34 Information SOAP: completed the processing
20.10.2011 09:57:34 Information SOAP: continuing to response message 765df5dd-fb23-11e0-a52b-0000124b6826
20.10.2011 09:57:34 Error SOAP: response message contains an error XIAdapter/HTTP/ADAPTER.HTTP_EXCEPTION - HTTP 500 Internal Server Error
20.10.2011 09:57:34 Error MP: exception caught with cause com.sap.engine.interfaces.messaging.api.exception.MessagingException: SOAP: response message contains an error XIAdapter/HTTP/ADAPTER.HTTP_EXCEPTION - HTTP 500 Internal Server Error
20.10.2011 09:57:34 Error Adapter Framework caught exception: SOAP: response message contains an error XIAdapter/HTTP/ADAPTER.HTTP_EXCEPTION - HTTP 500 Internal Server Error
20.10.2011 09:57:34 Error Delivering the message to the application using connection SOAP_http://sap.com/xi/XI/System failed, due to: com.sap.engine.interfaces.messaging.api.exception.MessagingException: SOAP: response message contains an error XIAdapter/HTTP/ADAPTER.HTTP_EXCEPTION - HTTP 500 Internal Server Error. Setting message to status failed.
20.10.2011 09:57:34 Error The message status was set to FAIL.

Unsupported file type (.mov)

I am using Adobe After Effects CS4 (9...)
I am trying to create Andrew Krammer's ,,crumble" effect (http://www.videocopilot.net/tutorial/procedural_crumble/)
If you skip at 23:44 you will see that he is adding an imported .mov file.
Everytime i try to import a .mov file, i get the following error: After Effects error: Can't import file "NAME.mov": unsupported file type or extension. ( 0::1 )
I think I have what I need: QuickTime 7.7.1 (it's the latest version I found, right from Apple's website)
(I don't know if this really helps:) When i click File>Export> QuickTime is disabled, not selectable. It says: QuickTime 7.4.1 or later required (even though i have 7.7.1)
I do not really want to convert the .mov into anything else because I saw that the .mov file (from Andrew Krammer's video) don't display the background, only the dust (in my case). Other video types DO display the black background. The files I try to import to AE work (they can be opened with QuickTime, no errors)

What is your OS? After Effects requires QuickTime. Is your AE up to date?

WCS 7.0.164.0 Report by vendor (device type)

WCS 7.0.164.0
I have been asked to produce a client’s report that shows all different vendors (devices type). We have about 10000 users in our system on about 3000 APs (light version) I created a client summary report but encountered some limitations:
If I select any time period over 6 hours, I get the message “The report you are trying to generate contains more than the supported number of records (10000). Change the report criteria to generate a report with fewer records”
If I select a time period of 6 hours or less, I get the report including vendor statistics. Is there any way to differentiate within the vendors by device type? For example instead of the vendor apple, get apple-iPhone, apple-iTouch, apple-laptop, etc.
I would like the ability to create my own reports, by I don’t think it is possible on the Version I’m running. All reports can be customized up to a point, but you still get information you might not care for.
Thanks for any information to overcome these issues.
Jorge Jiles.

Hi Jorge,
It looks like such a level of granularity may not be achievable yet.
Should you need such a feature to be evaluated for potentially being included in future software releases, I would recommend to contact your local Cisco account team.
They should be able to follow up and submit a product enhancement request (PER).
Business units will evaluate PERs and, if feasible for the market, they may consider implementing such an enhancement in future versions of the SW/HW.
Regards,
Fede

HTTP 415 Unsupported Media Type with SOAP adapter ?

Hello All,
Iam getting HTTP 415 Unsupported Media Type with SOAP adapter error while executing the scenario.
i got one thread which have the solution. iam not getting exactly how to write message transform Bean.
HTTP 415 Unsupported Media Type with SOAP adapter trying to put SOAP header
Please tell me where i need to write the MessageTransformBean at sender adapter or receiver file adapter.
Thanks and regards,
chinna

Hi Chinna,
Have you checked this
http://www.w3.org/Protocols/rfc2616/rfc2616-sec10.html
Regards
Ramesh

[RPC Fault faultString="HTTP/1.1 415 Unsupported Media Type" faultCode="Server.Proxy.Request.Failed"

Hi,
Posting in the 'General' forums as well. Did not yet get any response for the topic posted in the 'Configuration and Getting Started Discussion' forum.
I am having nightmares to call the POST method of a REST service thru Flex. Initially tried with the HTTPService without any proxy server. Wasn't able to call POST, though the GET method was successfully called. Please see the post here (http://www.flexdeveloper.eu/forums/actionscript-3-0/how-to-acces-post-method-of-rest-web -service-thru-flex/)
b THEN I tried with BlazeDS
, but with the same results!
I have set up BlazeDS with the integrated Tomcat option. I have also set up the Flex project as mentioned in the instructions. It is working fine when I run the sample projects.
But the problem is that
i when I try to access a
b POST for a REST service,
i I get the "HTTP/1.1 415 Unsupported Media Type" fault.
b The complete fault I'm getting is: [RPC Fault faultString="HTTP/1.1 415 Unsupported Media Type" faultCode="Server.Proxy.Request.Failed" faultDetail="HTTP/1.1 415 Unsupported Media Type"]
at mx.rpc::AbstractInvoker/http://www.adobe.com/2006/flex/mx/internal::faultHandler()[E:\dev \3.1.0\frameworks\projects\rpc\src\mx\rpc\AbstractInvoker.as:218]
at mx.rpc::Responder/fault()[E:\dev\3.1.0\frameworks\projects\rpc\src\mx\rpc\Responder.as:53 ]
at mx.rpc::AsyncRequest/fault()[E:\dev\3.1.0\frameworks\projects\rpc\src\mx\rpc\AsyncRequest .as:103]
at HTTPMessageResponder/resultHandler()[E:\dev\3.1.0\frameworks\projects\rpc\src\mx\messagin g\channels\HTTPChannel.as:871]
at HTTPMessageResponder/completeHandler()[E:\dev\3.1.0\frameworks\projects\rpc\src\mx\messag ing\channels\HTTPChannel.as:940]
at ChannelRequestLoader/callEventCallback()[E:\dev\3.1.0\frameworks\projects\rpc\src\mx\mess aging\channels\HTTPChannel.as:1155]
at ChannelRequestLoader/completeHandler()[E:\dev\3.1.0\frameworks\projects\rpc\src\mx\messag ing\channels\HTTPChannel.as:1191]
at flash.events::EventDispatcher/dispatchEventFunction()
at flash.events::EventDispatcher/dispatchEvent()
at flash.net::URLLoader/onComplete()
I have added correct entry to the policy-config.xml (I know this because the GET for the same REST service is working).
b Only the POST thing is giving me the fault!
Appreciate any inputs. (am in need of 'em badly)
thanks
BJG

My guess is that the Server/Rest service doesn't like the content type of the request. HTTPService uses a content type of application/x-www-form-urlencoded by default. Maybe the Rest service is expecting the request to be XML? If that's the case, you need to set the contentType property of the HTTPService to application/xml.
Sometimes an HTTP sniffer/proxy such as Charles can be useful for debugging these kinds of issues. If my suggestion doesn't help, capture the HTTP request and response using a HTTP sniffer like Charles and post back to this thread with it and someone will take a look at it for you. Thanks.
-Alex

Unsupported device type

Similar Messages

Maybe you are looking for