Unzip file using PayloadZipBean in Sender FILE adapter

I am trying to unzip a flat file in Sender FILE adapter using PayloadZipBean.
I am getting mapping error. The problem is File adapter is reading data without unzipping. I am getting weird characters/data, so mapping error.
I searched all the blogs/ forum threads and help.sap.com, everywhere the focus is on zipping, not unzipping.
the file I have is with .gz extension, but I tried with .zip extension also.
Please help in resolving this issue.
Edited by: Gopal Janagama on May 2, 2008 11:42 PM

Gopal,
GZIP and ZIP format are slightly different, as stated here :
"GZIP compresses only one file and does not have a header. ZIP contains header information about what files are contained in the file."
So I'm not sure the PayloadZipBean supports GZIP format ... Try to ungzip and then zip its content and see if the bean works for it
Rgds
Chris

Similar Messages

Using wildcards (*) in sender file adapter - FTP type

Hi guys!
Dooes it work using wildcards in sender file adapter (FTP type(!) (filesystem obviously work))? I tried it and it failed. it works only for exact name..
I read some articles about FTP and the result is, that ftp work always only with 1 file, so I'm wondering, if this is possible.
Thanks for info!
Olian

Thanks for all replies..
I know of course, that * can be used, I use it in many scenarios too. But on a FileSystem. It is not working if the sender type is FTP.
*, ., *.dat, ... nothing like that works.. Just exact file name.
I am able to pick up file, if I specify it's exact name, so there should be no problem with permissions..
Please, I'd appreciate one reply with comfirmation: yes, we are using asterisk (*) , we access source files via FTP and they are processed.
Is there anybody with this experience, that it works?
Thank you!
Olian

How to transfer input file into XI through sender file adapter

Hi
I am quite new to XI. Want to know how I can transfer a file into XI through sender file adapter. I dont have any input file, so I have to create a sample input file and I want to transfer that into XI. Can you please advise me of the steps involved in that. I have finished work in design and directory, now I want to push file the sample file into XI. The receiver adapter is an IDoc adapter. And also a very trivial question. How I can place my sample file into my source directory. Thanks

Hi Rajiv,
If your transport protocol is NFS then you need to put the file in the XI server. Because it becomes the Network File System. For that you can just type the ip address of the XI server in the "run" command or in the browser with "
" then in any of the Folders you can paste your file. But ensure that this is the path you give in your Sender File Adapter.
If your transport protocol is FTP then you need to see that ftp is running in your system. for that go to Control Panel>Add/Remove Programs>Add/Remove Components. In that check the IIS server and go to details and see that ftp is also checked. Now ftp is running in your system.
Now open your C:> drive >InetPub>ftproot . and create a folder here and paste your file. In the configuration of your File sender adapter just mention the name of the folder.
For your information, you can create a file with xml tags and namespace and message type manually (or) you can directly get it from the test tab of message mapping and generate source code.

Why do i get an error 66 when i sent a mail use SMTP Email Send File.vi?

        When i use SMTP Email Send File.vi,it works very well for some special mail sever such as the sever of my company,For others,while debugging it ,i use a free email address from 163 (http://mail.163.com/) or Sina(http://mail.sina.com.cn/) i get an error 66.I use the default sever port number(incoming mail sever(POP3):110,Outgoing mail sever(SMTP):25).
Server information for 163:
   incoming mail sever(POP3)op3.163.com
   Outgoing mail sever(SMTP):smtp.163.com
Server information for Sina:
   incoming mail sever(POP3)op3.sina.com
   Outgoing mail sever(SMTP):smtp.sina.com
Thank you!

According to the LabVIEW documentation error code 66 is: "The network connection was closed by the peer", which is not very helpful. There could be a number of reasons why this happens. Could also be that the server was down. I had trouble connecting to one of the sites you listed. Does the server require authentication? I tried the links you provided, but they're in a foreign language and I can't read them, so I can't tell. If authentication is required, then the SMTP VIs provided with LabVIEW won't work since they don't handle authentication. If the server requires authentication you can try the updated OpenG SMTP VIs that I had posted in this thread.

HT203106 Can I use AirDrop to send files from iPhone 5 to my iPad Air 2?

Can I use AirDrop to send files from iPhone 5 to my iPad Air 2?

Yes.
Use AirDrop to wirelessly share content - Apple Support

Read an avi file using "Read from binary file" vi

My question is how to read an avi file using "Read from binary file" vi .
My objective is to create a series of small avi files by using IMAQ AVI write frame with mpeg-4 codec of 2 second long (so 40 frames in each file with 20 fps ) and then send them one by one so as to create a stream of video. The image are grabbed from USB camera. If I read those frames using IMAQ AVI read frame then compression advantage would be lost so I want to read the whole file itself.
I read the avi file using "Read from binary file" with unsigned 8 bit data format and then sent to remote end and save it and then display it, however it didnt work. I later found that if I read an image file using "Read from binary file" with unsigned 8 bit data format and save it in local computer itself , the format would be changed and it would be unrecognizable. Am I doing wrong by reading the file in unsined 8 bit integer format or should I have used any other data types.
I am using Labview 8.5 and Labview vision development module and vision acquisition module 8.5
Your help would be highly appreciated.
Thank you.
Solved!
Go to Solution.
Attachments:
read avi file in other data format.JPG ‏26 KB

Hello,
Check out the (full) help message for "write to binary file"
The "prepend array or string size" input defaults to true, so in your example the data written to the file will have array size information added at the beginning and your output file will be (four bytes) longer than your input file. Wire a False constant to "prepend array or string size" to prevent this happening.
Rod.
Message Edited by Rod on 10-14-2008 02:43 PM

Archive file with errors in sender file adapter not working! please help!

Hi Experts,
I have a file to RFC scenario. the input is a XML file. I have setup the flag in sender file adapter channel for archiving the input files with errors. But it is not working.
For testing I have used an invalid xML file for example without the main XML tag. I have also tested with a MSWORD file saved with.xml extension. But in both the cases the files are not getting archived.
My archive location permissions are fine and in fact normal archive operation is happening. That is, if I select the processing mode as "Archive" and gave the Archive directory then files are getting archived. The problem is only with the "Archive faulty source files" option.
What am I missing? DO I need to do some more configurations?
What are the prerequisites if any for this option?
How to test this?
Please help me! I will be greatfull to you all!
Thanks & Regards
Gopal

and go thru this links
Creating a Single Archive of the Version Files
http://help.sap.com/saphelp_nw04/helpdata/en/79/1e7aecc315004fb4966d1548447675/frameset.htm
http://help.sap.com/saphelp_nw04/helpdata/en/31/8aed3ea86d3d67e10000000a114084/frameset.htm
Note: reward points if solution found helpfull
Regards
Chandrakanth.k

File Content Conversion Problem: Sender File Adapter

Hi All,
In Sender File Adapter, how to spilt the single line into different lines using + as a separator. Plz see below my source file.
#SMESS=IV01:672633SAP:676968:::NL51:02:11+
COPS=678713:676968:070416:IV01'3:11IVFR=678713:PDA and'IND 2'9206 AD'Dtn'INIVDA=070416IVNR=6264008195:676968add1
#EMESS=0+
In above txt file there are 3 lines.
1st line starts with #SMESS
2nd line starts with COPS
3rd line starts with #EMESS.
In 2nd line, if u observe there are 3 lines separating by +. My task is, I have to spilt the 2nd line into 3 lines using + separator.
I already used the xx.endSeparator as '+' to spilt the line but it is not working....
Could anyone help me how to do this. This is very urgent
Thnx,
Kumar.

Hi Shankar,
1) My Expected XML Structure:
<?xml version="1.0" encoding="utf-8" ?>
- <ns:MT_IV01 xmlns:ns="http://ms.com/dev/ms">
- <Recordset>
- <DT_SMESS>
<D_9901>IV01</D_9901>
<D_9902>672633SAP</D_9902>
<D_9903>676968</D_9903>
<D_9904 />
<D_9905 />
<D_9906>NL51</D_9906>
<D_9907>02</D_9907>
<D_9908>11</D_9908>
</DT_SMESS>
- <DT_COPS_2>
<D_C022>678713</D_C022>
<D_C023>676968</D_C023>
<D_C008>070416</D_C008>
<D_C111>IV01'3</D_C111>
<D_H559>11</D_H559>
</DT_COPS_2>
- <DT_IVFR_2>
<D_C024>678714</D_C024>
<D_D333>PDA and'IND 2'9206 AD'Dtn'IN+</D_D333>
</DT_IVFR_2>
- <DT_IVDA_2>
<D_D365>070416</D_D365>
</DT_IVDA_2>
- <DT_IVNR_2>
<D_D189>6264008195</D_D189>
<D_H364>676968add1</D_H364>
</DT_IVNR_2>
- <DT_EMESS>
<D_D9901_1>0</D_D9901_1>
</DT_EMESS>
</Recordset>
</ns:MT_IV01>
2) I am not getting any error even if I use key Fields or Not becoz in the RecordSet Structure I mentioned DataType, 1 instead of DataType, *.
3) FCC Parameters:
Document Name: MT_IV01
Document Namespace: http://ms.com/dev/ms
Recordset Structure: DT_SMESS,1,DT_COPS_2,1,DT_IVFR_2,1,DT_IVDA_2,1,DT_IVNR_2,1,DT_EMESS,1
Recordset Sequence: Ascending
Key Field-type : String (Case-sensitive)
4) Error:
Conversion of file content to XML failed at position 0: java.lang.Exception: ERROR converting document line no. 2 according to structure 'DT_COPS_2':java.lang.Exception: ERROR in configuration: more elements in file csv structure than field names specified!

Need to read source file without deleting it - Sender SFTP adapter

Dear friends,
The data from the source file needs to be read by PI on a daily basis. The file should not be deleted.
Vendor updates the file on a daily basis with file name DataFeed.xml
How to acheive this in Sender SFTP adapter ?
Kindly guide me
Renu

Hi Renu,
Unfortunately as of latest release of SFTP adapter. Arching is not possible :(. really dont know why :).
as a work around what you can do is create a scenario as 1 sender and 2 reicever.
here: 1 sender: will be the sender fileadapter which will pick the file from souce.
1st receiver: will be a receiver file channel which will palce back the file in the source Archive folder.
2ed Receiver: this will be the actual receiver to which the data has to be given.
Or write a Module in Sender adapter which will archive the files in new location.
Note: Here i am assuming that each time the source creates a new file with same name which contains new data in it everytime.
Regards,
Senthilprakash.

Problem when using keyfield in sender file content conversion

Hi all,
I am using FCC at sender side.
My recordset structure is as follow::
<MT_TW_TLOG>
<Transaction>
   ---<SalesItem> 1...unbounded
       <XF_SOURCESYS>
       <XF_STORECODE>
       <XF_TYPE>
       <XF_VOIDFLAG>
   ---</saleItem>
   ---<SalesReturn> 1...unbounded
       <XF_SOURCESYS>
       <XF_STORECODE>
       <XF_TYPE>
       <XF_VOIDFLAG>
   ---</saleReturn>
   ---<SalesTotal>
       <XF_SOURCESYS>
       <XF_STORECODE>
       <XF_TYPE>
       <XF_VOIDFLAG>
   ---</saleTotal>
   ---<SalesTender> 1...unbounded
       <XF_SOURCESYS>
       <XF_STORECODE>
       <XF_TYPE>
       <XF_VOIDFLAG>
   ---</saleTender>
</Transaction>
FCC specification that i have used is::
Recordset name::       Transaction
Recordset Structure:: salesItem,,salesReturn,,salesTotal,1,SalesTender,*
Recordset Sequencee::
Variable
Key field name::XF_TYPE
key fiel type::String(Case-sensitive)
then i have given following information::
salesItem.fieldnames ::all field names
salesItem.fieldSeparator::,
salesItem.keyFieldvalue::2
salesItem.processFiledNames::fromConfiguration
salesReturn.fieldnames ::all field names
salesReturn.fieldSeparator::,
salesReturn.keyFieldvalue::2
salesReturn.processFiledNames::fromConfiguration
salesTotal.fieldnames ::all field names
salesTotal.fieldSeparator::,
salesTotal.keyFieldvalue::2
salesTotal.processFiledNames::fromConfiguration
salesTender.fieldnames ::all field names
salesTender.fieldSeparator::,
salesTender.keyFieldvalue::2
salesTender.processFiledNames::fromConfiguration
My source file is a text file.
So when i am transfering following data,
scenario works fine.
PCTW,TWS001,2,1
PCTW,TWS001,2,10
PCTW,TWS001,3,2
PCTW,TWS001,1,3
PCTW,TWS001,4,4
Third field is my XF_TYPE.
But if i change the order of records as follows::
PCTW,TWS001,3,1
PCTW,TWS001,3,10
PCTW,TWS001,2,2
PCTW,TWS001,1,3
PCTW,TWS001,4,4
It fails at adaper monitor and throws following error::
2006-11-01 10:42:00 UTC: Error: Conversion of complete file content of 'try.txt' to XML format failed around position 0: Exception: ERROR consistency check in recordset structure validation (line no. 3: missing structure(s) before type 'SalesItem'
Please provide some help on it.
Thanks & Regards,
Nilima

Hi Nilima,
Just go through this Weblog.
/people/anish.abraham2/blog/2005/06/08/content-conversion-patternrandom-content-in-input-file
and specially the hilighted ( circled text ) in this and its description below.
Hope this will be helpful
Reward if helpful.
Regards
Sachin

ALV truncation while download using List--Save/send--File--Spread sheet

Experts,
In ALV output, I am trying to download using menu item
"List --> Save/send --> File --> Spread sheet" then in the popup appears
here if i GIVE the FILE NAME THEN,material number is getting truncated.
If I don't give any file name it is storing as ".xls" and not getting truncated.
How to correct this or avoid this truncation.
OR
If we can't do correction about truncation ...my function consultant is asking to
to disable "List --> Save/send --> File".
Thanks in advance.
Sam

Solved by my own....
We need to pass
i_fieldcat-no_zero = 'X'.
so that the zeros at the end won't get truncated.

Using Flyer to send files over a Bluetooth connection

import mx.utils.Delegate;
import com.flyer.Bluetooth;
var connection_str:String = “127.0.0.1″;
var port_num:Number = 9100;
var connection_bt:Bluetooth = new Bluetooth();
var filePath_str:String = “E:\\photo_001.png”;
function sendFile():Void {
connection_bt.connect(connection_str, port_num);
status_txt.text = “Connecting to Python…”;
function onBluetoothConnect(success_bool:Boolean):Void {
if (success_bool) {
status_txt.text = “Sending file…”;
connection_bt.send(”sendFile” + “|”
+ filePath_str);
} else {
status_txt.text = “Connection failed.”;
function onBluetoothData(source_str:String):Void {
status_txt.text = source_str;
function onBluetoothClose():Void {}
connection_bt.onData = Delegate.create(this,
onBluetoothData);
connection_bt.onConnect = Delegate.create(this,
onBluetoothConnect);
connection_bt.onClose = Delegate.create(this,
onBluetoothClose);
sendFile()

is is possible to use a filestream to send files from
client to server? If so could someone show me some
example code or point me to a good internet
reference. i have done some searching and reading
but haven't found anything that showed it well.
thanks for the help in advance.The API descriptions for the 2 filestream classes gives the answer:
FileInputStream - A FileInputStream obtains input bytes from a file in a file system.
FileOutputStream - A file output stream is an output stream for writing data to a File or to a FileDescriptor.

Rename files using text or excel file

I am trying to find out how to rename files on my pc using the names stored in a text document
eg. the file on the pc is called "C07_08.dat"
the text file has the following line "3am Eternal KLF 03:15 121 BMG C07.08"
i want to change the name of the file "C07_08.dat" to "3am Eternal.mpeg"
What I would like is a batch file or program or something that will see the text "C07.08" and find the corresponding file "C07_08.dat" and rename it "3am Eternal.mpeg"
I have managed to create a excel document that has the information in four separate columns
Column A has the name of the file I want to use (ie. 3am Eternal) Column B & C have unneeded information and Column D has the file reference (ie. C07.08)
I was told that Python or Visual basic could do this so I downloaded them but I have no experience with this so im lost as to what to do, I have over 1800 of these files so doing it file by file will take quite a while.
I have included a sample of the text file for reference if that helps
3am Eternal KLF 03:15 121 BMG C07.08
4 In The Morning Gwen Stefani 04:22 092 UMA HD1.10
4 Minutes Madonna ft J Timberlake 04:04 113 WAR HE3.05
5 6 7 8 Steps 03:24 000 BMG C48.03
5678 Steps 03:23 140 MUS H16.02
6 Of 1 Thing Craig David 03:15 116 WAR HE2.11
60 MPH New Order 03:51 125 WAR N57.11
7 Days Craig David 04:30 084 SHO N41.16
7 Things Miley Cyrus 03:29 107 EMI HE7.09
99 Luft Balloons Nena 03:58 095 WAR C27.10
99 Times Kate Voegele 03:27 112 UMA HG6.07
A Girl Like You Edwyn Collins 03:47 126 MDS R06.08
A Little Bit Pandora 03:35 132 UMA H23.01
A Little Less Conversation Elvis VS JXL 03:02 115 BMG H68.03
A Matter Of Trust Billy Joel 04:00 110 SON C59.11
A New Day Has Come Celine Dion 04:20 092 SON H65.20
A Woman Like You Mondo Rock 04:03 169 MUS R06.01
About You Now Sugababes 03:32 083 UMA HD5.08
Absolutely Everybody Vanessa Amorosi 03:52 124 TRA H40.06
Absolutely Fabulous Pet Shop Boys 03:45 132 EMI C15.02
Accidentally In Love Counting Crows 03:08 138 UMA H94.05
According To You Orianthi 03:18 066 UMA HG4.12
Achy Breaky Heart Billy Ray Cyrus 03:55 122 SON K11.02

Here are two VBScripts that will rename the files based on the text file example you provided. The script that reads a
TEXT FILE requires each entry to be separated by
ONE TAB because it is the
TAB
that it uses to split each line into 4 parts (part1 - old file name, part2 and part3 - items you don’t need, part 4 - new file name). If there is more that one tab then the Split Function will not work properly.
The second VBScript will read the
EXCEL FILE row by row and use the values in Column A for the old file name and
Column D for the new file name. This approach will work much better if you have an excel document setup like this.
I used your example that you provided and it test fine for both approaches.
'Read text file
Dim objFSO, objFolder, inFile, strInLine, strOldFile, strNewFile
Set objFSO = CreateObject("Scripting.FileSystemObject")
'Select the folder
Set objFolder = objFSO.GetFolder("C:\Scripts\MusicFiles")
'Open Text File
Set inFile = objFSO.OpenTextFile("C:\Scripts\MusicFiles.txt",1)
Do Until inFile.AtEndOfStream
'Read text file line by line and Split each line into 4 parts.
strInLine = Split(inFile.ReadLine, vbTab)
'Old File name
strOldFile = strInLine(3)
'new File name
strNewFile = strInLine(0)
'Loop through the files in the folder
For Each File In objFolder.Files
'If the file name matches the old file name above
If File.Name = strOldFile & ".dat" Then
'Replace it
File.Name = strNewFile & ".mpeg"
End If
Next
Loop
'Close the text reader
inFile.Close
MsgBox "Done."
'Read Excel file
Dim objFSO, objExl, objFolder, objWorkbook, strOldFile, strNewFile, intRow
Set objFSO = CreateObject("Scripting.FileSystemObject")
Set objExl = CreateObject("Excel.Application")
'Select the folder
Set objFolder = objFSO.GetFolder("C:\Scripts\MusicFiles")
'Open the Excel file
Set objWorkbook = objExl.Workbooks.Open("C:\Scripts\MusicFiles.xls")
'Start at row 1
intRow = 1
'Read each Row until the end
Do Until objExl.Cells(intRow,1).Value = ""
'Old file name is in column 4
strOldFile = objExl.Cells(intRow, 4).Value
'New file name is in column 1
strNewFile = objExl.Cells(intRow, 1).Value
'Loop through each file in the selected folder
For Each File In objFolder.Files
'If the file name matches the old file name above
If File.Name = strOldFile & ".dat" Then
'Replace it
File.Name = strNewFile & ".mpeg"
End If
Next
'Increment each row
intRow = intRow + 1
Loop
'Close Excel
objExl.Quit
MsgBox "Done."
v/r LikeToCode....Mark the best replies as answers.

CS6 - does import DV files used with CS5. File conversion is N.G. Help!

Trying to upgrade from CS5 to CS6. Upgraded one NLE and found CS6 will not import DV files that were used with CS5. Can't believe Adobe missed this one! We create many DV files each day that can't be used with CS6. Any sort of conversion would just add another unnecessary step. Do I need to stay with CS5 or is there a fix? Thanks.

1st - More information needed for someone to help... please click below and provide the requested information
-PPro Information FAQ http://forums.adobe.com/message/4200840
2nd - exactly what is inside your video file?
Codec & Format information, read both links in reply #1 http://forums.adobe.com/thread/1270588
Report back with the codec details of your file, use the programs below... A screen shot works well to SHOW people what you are doing
http://forums.adobe.com/thread/592070?tstart=30 for screen shot instructions
Find file information for PC/Mac http://mediaarea.net/en/MediaInfo/Download

File Content Conversion in Sender File Adapter

Hi,
I am implementing a scenario, where I need to do Content conversion in My file Adapter.My input file is as follows
BGN00S-A200711281003ET4
REF38381012
DTP007D820071128
N1P5P5MicrosoftFI58-0612397
INSY18030XNAN
REFZZZZ666666666
DTP336D819970331
NM1ILIL1AdamsMarkE34666666666
PERIPIPHP770555-5555
N31470 Georgia Club Drive
N4StathamGA30666
DMGD819571022MM7
HD030HLTAE1D
My data type is as below.
<header>
     <BGN>
          <A></A>
          <B></B>
          <C></C>
          <D></D>
     </BGN>
     <REF>
          <A1></A1>
          <B1></B1>
          <C1></C1>
          <D1></D1>
     </REF>
     <DTP>
          <A2></A2>
          <B2></B2>
          <C2></C2>
          <D2></D2>
     </DTP>
</header>
<Content>
     <N1>
          <A></A>
          <B></B>
          <C></C>
          <D></D>
     </N1>
     <REFAR>
          <A1></A1>
          <B1></B1>
          <C1></C1>
          <D1></D1>
     </REFAR>
     <DMP>
          <A2></A2>
          <B2></B2>
          <C2></C2>
          <D2></D2>
     </DMP>
</Content>
My issue is, How do I set my parameter in Sender Comm channel for content conversion especially at record structure.
I have provided the value as Header,1,Content,*
But its not working.
If I do provide like
BGN_REC,,REF_REC,,DTP_REC,,N1_REC,,INS_REC,,NM1_REC,,PER_REC,,N3_REC,,N4_REC,,DMG_REC,,HD_REC,* then ,I am not getting above XML format. Please suggest or How can I modify my Data type which competes to configure in Channel
Thanks
Manmadha

Hi All,
I am sorry for the Jumbled Content. I dont know what happened.
I should get the XML output as below.
header>
     <BGN>
          <A></A>
          <B></B>
          <C></C>
          <D></D>
     </BGN>
     <REF>
          <A1></A1>
          <B1></B1>
          <C1></C1>
          <D1></D1>
     </REF>
     <DTP>
          <A2></A2>
          <B2></B2>
          <C2></C2>
          <D2></D2>
     </DTP>
</header>
<Content>
     <N1>
          <A></A>
          <B></B>
          <C></C>
          <D></D>
     </N1>
     <REFAR>
          <A1></A1>
          <B1></B1>
          <C1></C1>
          <D1></D1>
     </REFAR>
     <DMP>
          <A2></A2>
          <B2></B2>
          <C2></C2>
          <D2></D2>
     </DMP>
</Content>

Unzip file using PayloadZipBean in Sender FILE adapter

Similar Messages

Maybe you are looking for