Up Date stat is failing
Dear All
DB Update stat is failing please help
BR0280I BRCONNECT time stamp: 2011-11-12 23.46.15
BR0884I Statistics collected for table: SAPDAT./BIC/0CZE_Q04, rows old/new: -1/13
BR0280I BRCONNECT time stamp: 2011-11-12 23.46.15
BR0881I Collecting statistics for table SAPDAT./BIC/B0000002000 with method/sample E/P.300 ...
BR0280I BRCONNECT time stamp: 2011-11-13 01.34.04
BR0301E SQL error -3113 at location stats_tab_collect-20, SQL statement:
'BEGIN DBMS_STATS.GATHER_TABLE_STATS (OWNNAME => '"SAPDAT"', TABNAME => '"/BIC/B0000002000"', ESTIMATE_PERCENT => 0.300, METHOD_
ORA-03113: end-of-file on communication channel
BR0280I BRCONNECT time stamp: 2011-11-13 01.34.04
BR0261E BRCONNECT cancelled by signal 13
BR0280I BRCONNECT time stamp: 2011-11-13 01.34.04
BR0301E SQL error -1092 at location db_connect-2,SQL statement:
'CONNECT /'
ORA-01092: ORACLE instance terminated. Disconnection forced
BR0310E Connect to database instance EBP failed
BR0806I End of BRCONNECT processing: cehfacda.sta2011-11-13 01.34.04
BR0280I BRCONNECT time stamp: 2011-11-13 01.34.04
BR0804I BRCONNECT terminated with errors
External program terminated with exit code 5
Thanks
Reddy
Hi,
My system is already on 10.2.0.4.0 and in sm21 i could find this log
Documentation for system log message BY 2 :
After the attempt to call a database operation, the database system has
returned the error code specified in the message, which indicates that
the operation concerned could not be executed successfully.
61446 354420 h Database Error (Non-SQL) BY 2 3113 FET dbds 596
Thanks
Reddy
Similar Messages
-
Sql insert statement will fail if the data value has empty line
Hi,
I notice if the insert statement in my .sql file contains data that has new line (enter key), the insert will fail.
For example:
insert into mytable (message)
values ('this is the first line
this is the second line that will cause insert statement to fail
so as this third line');
commit;
How to overcome this?
Please advise.
Thank you.
Message was edited by:
bchurn
Message was edited by:
bchurnIt did not return me any error. What is the error you are receiving ??
SQL> create table mytable (message varchar2(500));
Table created.
SQL> insert into mytable (message)
2 values ('this is the first line
3 this is the second line that will cause insert statement to fail
4 so as this third line');
1 row created.
SQL> @c:\test.txt
1 row created.contents of c:\test.txt
<<
insert into mytable (message)
values ('this is the first line
this is the second line that will cause insert statement to fail
so as this third line');
>> -
Data warehouse monitor initial state data synchronization process failed to write state.
Data Warehouse monitor initial state data synchronization process failed to write state to the Data Warehouse database. Failed to store synchronization process state information in the Data Warehouse database. The operation will be retried.
Exception 'SqlException': Timeout expired. The timeout period elapsed prior to completion of the operation or the server is not responding.
One or more workflows were affected by this.
Workflow name: Microsoft.SystemCenter.DataWarehouse.Synchronization.MonitorInitialState
Instance name: Data Warehouse Synchronization Service
Instance ID: {0FFB4A13-67B7-244A-4396-B1E6F3EB96E5}
Management group: SCOM2012R2BIZ
Could you please help me out of the issue?Hi,
It seems like that you are encountering event 31552, you may check operation manager event logs for more information regarding to this issue.
There can be many causes of getting this 31552 event, such as:
A sudden flood (or excessive sustained amounts) of data to the warehouse that is causing aggregations to fail moving forward.
The Exchange 2010 MP is imported into an environment with lots of statechanges happening.
Excessively large ManagedEntityProperty tables causing maintenance to fail because it cannot be parsed quickly enough in the time allotted.
Too much data in the warehouse staging tables which was not processed due to an issue and is now too much to be processed at one time.
Please go through the links below to get more information about troubleshooting this issue:
The 31552 event, or “why is my data warehouse server consuming so much CPU?”
http://blogs.technet.com/b/kevinholman/archive/2010/08/30/the-31552-event-or-why-is-my-data-warehouse-server-consuming-so-much-cpu.aspx
FIX: Failed to store data in the Data Warehouse due to a Exception ‘SqlException': Timeout expired.
Regards,
Yan Li
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected] -
I am trying to use cellular data and states connection failed. What do I need to do to fix this?
ThanksHi there April3939,
You may find the troubleshooting steps in the article below helpful.
iPad (Wi-Fi + Cellular Models): Troubleshooting a cellular data connection
http://support.apple.com/kb/TS4249
-Griff W. -
UPDATE STATEMENT GETTING FAILED
Hi
Can you specify me condition in which case update statement will fail and exception will be handled
I wanted to know that
Lets says I have a procedure
procedure p1 is
begin
update emp set deptno=50;
end;
can you suggest me when will update statement fail and an exception will be raised?
Appreciate your help on the above?
Thanks & Regards
Thakur Manoj R
Edited by: user1014019 on Feb 9, 2011 5:38 AMStandard Exceptions, from the the STANDARD package
DUP_VAL_ON_INDEX ORA-00001 You attempted to create a duplicate value in a field restricted by a unique index.
TIMEOUT_ON_RESOURCE ORA-00051 A resource timed out, took too long.
TRANSACTION_BACKED_OUT ORA-00061 The remote portion of a transaction has rolled back.
INVALID_CURSOR ORA-01001 The cursor does not yet exist. The cursor must be OPENed before any FETCH cursor or CLOSE cursor operation.
NOT_LOGGED_ON ORA-01012 You are not logged on.
LOGIN_DENIED ORA-01017 Invalid username/password.
NO_DATA_FOUND ORA-01403 No data was returned
TOO_MANY_ROWS ORA-01422 You tried to execute a SELECT INTO statement and more than one row was returned.
ZERO_DIVIDE ORA-01476 Divide by zero error.
INVALID_NUMBER ORA-01722 Converting a string to a number was unsuccessful.
STORAGE_ERROR ORA-06500 Out of memory.
PROGRAM_ERROR ORA-06501 Generic "Contact Oracle support" message.
VALUE_ERROR ORA-06502 You tried to perform an operation and there was a error on a conversion, truncation, or invalid constraining of numeric or character data.
ROWTYPE_MISMATCH ORA-06504
CURSOR_ALREADY_OPEN ORA-06511 The cursor is already open.
ACCESS_INTO_NULL ORA-06530
COLLECTION_IS_NULL ORA-06531 -
System State Backup fail. Writer name: 'NTDS' : State: [11] Failed : Last error: Non-retryable error
Hello!!! Everybody,
I have Win Server 2008 R2 contain Domain controller (No Hyper-V). I have to take "SYSTEM STATE DATA BACKUP". I have ran following command on this Server.
c:\>wbadmin start systemstatebackup -backuptarget:d:
but backup was not successful & I got following error in command prompt.
" A VOLUME SHADOW COPY SERVICE OPERATION HAS OCCURRED : <0X800423f4>. THE WRITER EXPERIENCED A NON-TRANSIENT ERROR. IF THE BACKUP PROCESS IS RETRIED,THE ERROR IS LIKELY TO REOCCUR."
I also ran following command to know exact problem.
c:\>vssadmin list writers
I got following error
Writer name: 'NTDS'
Writer Id: {b2014c9e-8711-4c5c-a5a9-3cf384484757}
Writer Instance Id: {21c57902-5037-467b-b9a3-72ed41c9723e}
State: [11] Failed
Last error: Non-retryable error
I also checked Event Viewer & got following 3 noserror.
(1) Event ID : 8229, Source : VSS
A VSS writer has rejected an event with error 0x800423f4, The writer experienced a non-transient error. If the backup process is retried, the error is likely reoccur.
Process ID : 608
(2) Event Id : 412, Source : ESENT. Task Category: Logging/Recovery
lsass (636) Unable to read the header of log file "\\?\Globalroot\device\harddiskvolumeshadowcopy2\Windows\NTDS\edb.log".Error:546
(3)Event Id : 521 Source : Backup
The backup operation that started at '2014-05-13T01:44:31.444000000Z' has failed because the Volume Shadow Copy Service operation to create a shadow copy of the volumes being backed up failed with following error code '2155348129'. Please review
the event details for a solution, and then rerun the backup operation once the issue is resolved.
I have also restart the server but problem is not resolved. I have no SQL in my Server.
I also re-register the VSS components with the help of following website.
Website Link : https://kb.acronis.com/content/45776
You are requested please solve my problem on very urgent basis.You can refer below link for your issue
http://waynestorey.com/blog/2012/01/18/windows-backup-fails-with-event-id-521-error-code-2155348129/
Please remember, if you see a post that helped you please click "Vote As Helpful" and if it answered your question, please click "Mark As Answer"
Mai Ali | My blog: Technical | Twitter:
Mai Ali -
Windows 2012 System State Backup Fails
We have a Windows 2012 Domain Controller VM that we would like to backup the System State using DPM. Agent has been installed and the Windows Backup has been added.
When the backup runs in DPM, the job fails. Here is the error code:
DPM cannot create a backup because Windows Server Backup (WSB) on the protected computer encountered an error (WSB Event ID: 517, WSB Error Code: 0x12363C0). (ID 30229 Details: Internal error code: 0x80990ED0)
When we try and create the backup using Windows Backup, the following error is in the log file:
following error code '0x807800C5' (There was a failure in preparing the backup image of one of the volumes in the backup set.). Please review the event details for a solution, and then rerun the backup operation once the issue is resolved.
We have tried attaching a separate drive and backup to a shared location. Both fail.
We have tried backup of just a few files on the DC instead of the System State, this fails as well.
All VSS Writers show as Stable with no errors
Server has the latest updates
Server has been rebooted, same issue
VM is Windows 2012 on a Windows 2008 R2 clustered host and is using Dynamic Disks (not fixed disks).
Anyone have any thoughts on what could be going on?Hi,
If any of the following are true, you will not be able to backup a system state to that volume.
• Make sure that the target volume has no shadow copy before the backup starts.
• If a system state backup is stored on a source volume, backup settings should be configured for full backups. By default, settings are configured for full backups.
• Periodically check that no other user or program maintains a shadow copy on the target volume.
• Do not keep volume level backups and system state backups in the same location.
• The volume used to store the system state backup needs twice the amount of free space as the size of the system state backup until the backup completes
Meanwhile please check if it is caused that you are backing up to a critical drive. Try modify the following key:
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\wbengine\SystemStateBackup\
Set the value of this entry as follows:
Name: AllowSSBToAnyVolume
Data type: DWORD
Value data: 1
If you have any feedback on our support, please send to [email protected] -
Hi
I have a pair of firewall 5520 which is running 8.2(5) image.
Recently I am facing the "HA state progression failed" failover issue in the secondary unit which forces the secondary unit to failover disabled stage.
Any body have idea why it is happening.
Both firewalls are directly connected. for the troubleshooting purposed I had changed the failover cable and other cables of secondary unit as well. this incident happened three times in last two three week. i had not done any changes regarding the failover concern.
some outputs Running config
interface Management0/0
description LAN Failover Interface
failover lan unit secondary
failover lan interface lan_fail Management0/0
failover key *****
failover interface ip lan_fail 1.1.1.1 255.255.255.252 standby 1.1.1.2
------------------ show failover ------------------
Failover Off (pseudo-Standby)
Failover unit Secondary
Failover LAN Interface: lan_fail Management0/0 (up)
Unit Poll frequency 1 seconds, holdtime 15 seconds
Interface Poll frequency 5 seconds, holdtime 25 seconds
Interface Policy 1
Monitored Interfaces 3 of 160 maximum
------------------ show failover history ------------------
==========================================================================
From State To State Reason
==========================================================================
02:16:25
Not Detected Negotiation No Error
02:16:45
Negotiation Cold Standby Detected an Active mate
02:17:00
Cold Standby Disabled HA state progression failed
==========================================================================
show failover state
State Last Failure Reason Date/Time
This host - Secondary
Disabled None
Other host - Primary
Not Detected None
====Configuration State===
====Communication State===Dear Prashant
I want to apply license to increase security context in FWSM which is running in Active-Active mode on VSS Core switches
As per below document, first we need to disable failover by entering 'no failover' command on active FWSM and then apply the license seperately on both FWSM.
I just want to know when i will disable the failover then standby move to pseudo-standby state.
Will there be any services impact which are running behind the FWSM when disbaling the failover and then re-enabling the failover.
http://www.cisco.com/c/en/us/td/docs/security/fwsm/fwsm40/configuration/guide/fwsm_cfg/swcnfg_f.html#wp1073226
Appreciate your response. -
We have the SharePoint Server 2010 with SP1 environment on which the custom SP2010 designer pages were working as expected before the
August 13, 2013 CU has installed. But, getting the below exception while trying to add the new item after the CU has installed.
Error while executing web part: System.NullReferenceException: Object reference not set to an instance of an object. at Microsoft.SharePoint.WebControls.SPDataSourceView.ExecuteInsert(IDictionary values) at
System.Web.UI.DataSourceView.Insert(IDictionary values, DataSourceViewOperationCallback callback) 3b64c3a0-48f3-4d4a-af54-d0a2fc4553cc
06/19/2014 16:49:37.65 w3wp.exe (0x1240) 0x1300 SharePoint Foundation
Runtime tkau Unexpected Microsoft.SharePoint.WebPartPages.DataFormWebPartException: The data source control
failed to execute the insert command. 3b64c3a0-48f3-4d4a-af54-d0a2fc4553cc at Microsoft.SharePoint.WebPartPages.DataFormWebPart.InsertCallback(Int32 affectedRecords, Exception ex) at System.Web.UI.DataSourceView.Insert(IDictionary
values, DataSourceViewOperationCallback callback) at Microsoft.SharePoint.WebPartPages.DataFormWebPart.FlatCommit() at Microsoft.SharePoint.WebPartPages.DataFormWebPart.HandleOnSave(Object sender, EventArgs e)
at Microsoft.SharePoint.WebPartPages.DataFormWebPart.RaisePostBackEvent(String eventArgument) at System.Web.UI.Page.RaisePostBackEvent(IPostBackEventHandler sourceControl, String eventArgument) at System.Web.UI.Page.ProcessRequestMain(Boolean
inclu... 3b64c3a0-48f3-4d4a-af54-d0a2fc4553cc
06/19/2014 16:49:37.65* w3wp.exe (0x1240) 0x1300 SharePoint Foundation
Runtime tkau Unexpected ...deStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint) 3b64c3a0-48f3-4d4a-af54-d0a2fc4553cc
I have tried changing the "DataSourceMode" as below, now the insert command is working, but update command is not working.
<SharePoint:SPDataSource runat="server" DataSourceMode="ListItem" />
Also, the lookup dropdown fields are displaying the value as "<a href="Daughterhttp://cpsp10/sites/Employees/_layouts/listform.aspx?PageType=4&ListId={8F62F444-FB6A-4F03-9522-C4696B45DCD1}&ID=10&RootFolder=*">Daughter</a>"
instead of only "Daughter".
Please provide the solution to get rid of this issue.
Thanks
RamasubbuTry below:
http://social.technet.microsoft.com/Forums/en-US/ae910269-3a0c-4506-844b-e8bc89d95b71/data-source-control-failed-to-execute-the-insert-command
http://blog.jussipalo.com/2012/01/sharepoint-2010-data-source-control.html
While there can be many causes for this generic error message, in my case the first parameter or ddwrt:DataBind function inside the SharePoint:FormFields element was
'i' and I was working with an Edit Form. Changing it to
'u' as it was with every other FormField fixed the issue.
<SharePoint:FormField runat="server" id="ff1{$Pos}" ControlMode="Edit" FieldName="Esittaja" __designer:bind="{ddwrt:DataBind('u',concat('ff1',$Pos),'Value','ValueChanged','ID',ddwrt:EscapeDelims(string(@ID)),'@Esittaja')}"
/>
Explanation:
DataBind operation type parameters (the first parameter) are listed below:
'i' stands for INSERT,
'u' stands for UPDATE,
'd' stands for DELETE.
http://webcache.googleusercontent.com/search?q=cache:d9HHY4I7omgJ:thearkfloats.blogspot.com/2014/03/sharepoint-2010-data-source-control.html+&cd=4&hl=en&ct=clnk&gl=in
If this helped you resolve your issue, please mark it Answered -
how do you remove back up data from the memory storage? my storage data states that i have over 80gb of data used for back ups and i dont know why as i use a external hard drive as a time machine .now my 250gb flash storage is nearly full.. HELP!
When Time Machine backs up a portable Mac, some of the free space will be used to make local snapshots, which are backup copies of recently deleted files. The space occupied by local snapshots is reported as available by the Finder, and should be considered as such. In the Storage display of System Information, local snapshots are shown as Backups. The snapshots are automatically deleted when they expire or when free space falls below a certain level. You ordinarily don't need to, and should not, delete local snapshots yourself. If you followed bad advice to disable local snapshots by running a shell command, you may have ended up with a lot of data in the Other category. Ask for instructions in that case.
See this support article for some simple ways to free up storage space. -
MAXL Import data statement error
Can someone assist me in the maxl import data statement.
In the import data statement "import database App.DB data from data_file "\\servername\\folder1\\folder1\\data.txt";
The error I get is trying to specify the syntax for the path of the server. Does someone have an example of the import statement syntax that is referencing the data file from a server?
ThanksHave you tried something like :-
import database App.Db data from text data_file "\\\\servername\\sharename\\directory\\datafile.txt" using server rules_file "dataload" on error write to "dataerrors.err";
Cheers
John
http://john-goodwin.blogspot.com/ -
Calling Bapi through BADI gives data statement error
Dear Experts,
I am trying to call BAPI through BADI ME_PROCESS_REQ_CUST --> process_item.
I get an error stating that "The addition OCCURS no longer supported in OO objects"
If, I remove OCCURS statement I get an error stating that "Tables with headers are no longer supported in OO context" for the following data statement.
Appreciate, if you could provide possible solution to overcome the problem.
Regards
Kumar
BAPI code is as follows.
DATA: LV_TABIX LIKE SY-TABIX,
LT_WMDVSX LIKE BAPIWMDVS OCCURS 0 WITH HEADER LINE,
LT_WMDVEX LIKE BAPIWMDVE OCCURS 0 WITH HEADER LINE.
LV_TABIX = SY-TABIX.
CLEAR: LT_WMDVSX, LT_WMDVEX.
REFRESH: LT_WMDVSX, LT_WMDVEX.
Fill communication table
LT_WMDVSX-REQ_DATE = ET_PROCUREMENT_ITEM-DELIV_DATE.
LT_WMDVSX-REQ_QTY = ET_PROCUREMENT_ITEM-QUANTITY.
APPEND LT_WMDVSX.
Availability check with check rule '03'
CALL FUNCTION 'BAPI_MATERIAL_AVAILABILITY'
EXPORTING
PLANT = ET_PROCUREMENT_ITEM-PLANT
MATERIAL = ET_PROCUREMENT_ITEM-MATERIAL
UNIT = ET_PROCUREMENT_ITEM-UNIT
CHECK_RULE = '03'
TABLES
WMDVSX = LT_WMDVSX
WMDVEX = LT_WMDVEX
EXCEPTIONS
OTHERS = 1.
IF SY-SUBRC EQ 0.
READ TABLE LT_WMDVEX WITH KEY
COM_DATE = ET_PROCUREMENT_ITEM-DELIV_DATE.
IF SY-SUBRC EQ 0.
ET_PROCUREMENT_ITEM-AVAIL_QTY = LT_WMDVEX-COM_QTY.
ENDIF.
ENDIF.Hi,
Occurs is no more supported by SAP ( is an obsolete statement )
<b>Instead of following code</b>
DATA: LV_TABIX LIKE SY-TABIX,
LT_WMDVSX LIKE BAPIWMDVS OCCURS 0 WITH HEADER LINE,
LT_WMDVEX LIKE BAPIWMDVE OCCURS 0 WITH HEADER LINE.
you can use
data: LT_WMDVSX type standard table of BAPIWMDVS,
LT_WMDVEX type standrad table of BAPIWMDVE,
LS_WMDVSX like line of LT_WMDVSX , "( work area )
LS_WMDVEX like line of LT_WMDVEX. "(work area)
use workarea to get the data and then append the records from workarea to Internal tables
Reward points if usefull
Regards,
Mohan -
Please tell me the difference between CREATE OBJECT & CREATE DATA ,statements in CRMTECHNICAL
Please tell me the difference between CREATE OBJECT & CREATE DATA ,statements in CRMTECHNICAL
found it on my own . the best way to do this is use the RetriveLimitedHierTreeCommand with a search on the taxonomy table.
-
Planning Data Pull process failed with timeout error
Hi Experts,
Version: Oracle apps 11.5.10.2
Issue: Planning Data Pull process failed with timeout error
message in the log file as follows,
The Request id : 90018907 has Phase : COMPLETE and Status: ERROR
Concurrent Message : Timeout error.
There is an Unknown error in the Worker.
Planning Data Pull process failed.
+-------------------------------------
Please advice what could be the problem. I submitted, standard data collection programs with 900 mins and 8 workers.
Refresh Collection Snapshot completed without any issuePlease see these docs.
Data Collection Fails Because Of Time Out Timeout error [ID 339968.1]
OPM-ASCP: Data Collection Timeout Error [ID 601539.1]
STD COLLECTION FAILING AT PLANNING DATA PULL WITH TIMEOUT ERROR [ID 978472.1]
Data Collections is Failing - All Errors - First Diagnostic Steps [ID 207644.1]
Troubleshooting Errors with ATP/Planning Data Collections [ID 1227255.1]
MSCPDC PLANNING ODS LOAD ERRORS WITH TIMEOUT ERROR - POOR PERFORMANCE [ID 417633.1]
Thanks,
Hussein -
Why do we use CRAETE DATA statement ?
Hi,
Why do we use CREATE DATA statement ? is it only for optimisation ?
thanks.
Edited by: B on Jan 27, 2009 4:13 PM>
B wrote:
> Hi, thank you for the answers. The reply by Sonia Baboo was not copy paste from abap help. whereas the one from Niki was.
>
>
> i have rewarded points. the answers were very helpful
>
> thanks
> B
It was copy and paste from SAP Help. http://help.sap.com/saphelp_nw70/helpdata/EN/16/0dce040cf711d3b9360000e8353423/content.htm
Maybe you are looking for
-
Little help, please. I want to erase the hard drive on my iMac so we sell it. I do not want any data inadvertently passed onto the next user. I am familiar with disk utility and have gone there but when I click on the hard drive it is subdue and I
-
Call Smartform in backend (ECC 5.0) from portal (EP 6.0)
Hello out there, we are using an solution with interactive forms (PCR) where users can run hiring processes in the portal. When ending an hiring form we would like to show a temporary version of the data provided during the hiring (with interactive f
-
Screen goes blank - need help!
Some weeks ago the screen on my iMac started to go blank. The only way to recover was to re-boot. The problem got worse until the machine became un-usable. I tried everything I knew, including switching off and unplugging to reset the pram as suggest
-
Problem to display team overview in the MSS_version ECC 6.0 X Portal 7.0
Hi. I'm having a problem to visualize some manager's team overview in the MSS. The screen of the team does not appear for some manager's and it appears correctly for the others. Does anyone already have this problem? Thank you for the help. Regards,
-
In Thunderbird I seem to be able to enter partial account information but then I invariably cannot go further. The only utililities I have installed are those I have used before without problems. The present version of Windows has a popup utility tha