UPC code assignment.

Hi All,
We have a requirement in our Production system related to UPC code.
Whe the material X was created it was assigned an EAN Categroy UC it generated a UPC code.
After this happened they deleted the UPC code in material master.
UPC code number 885909177950 for EAN caegory UC.
User now wants to re-assing the same UPC code.
Is this possible. Please guide me if this is possible.
Thansk in Advance,
MJ

ok i got the workaround

Similar Messages

  • Issue with UPC codes in Inbound sales orders via EDI.

    Hi All
    We are on ECC 6.0. We have incoming sales orders through EDI IDOCS. In the incoming IDCO the customer can provide either of the following information in that sequence.
    1.  GTIN number
    2.  Customer material number
    3.  UPC code
    4.  Old Product code.
    We need to derive the correct material number for each customer. Now I can achieve this through standard material determination using material determination type access sequences in the order specified above. However I cannot do the same, as we need to use material determination for genuine promotions. For example I can maintain a material determination record to map UPC 123456789 to Material number ABC in SAP R/3. However we do have situation where in for a particular season or depending upon the ATP situation we may have to derive Material XYZ (SAP material number) in case customer orders material ABC. So in other words if I use material determination to derive my SAP material number for in-coming IDOCS based on UPC codes then I would need to have multi level material determination. I.e. From an IDOC for UPC code 1234566789 I derive material ABC and then for material ABC derive material XYZ.
    I tried setting up these two layers of material determination in the standard system. It is possible only if I use a substitution reason which copies the material entered as a sub-item. We do not want to maintain the sub-item in sales order and relevant documents for a lot of other reasons. Is there a way I can use standard Material determination/substitution to derive this multi level search without haveing to copy the sub-item in sales order? Am I missing some settings here? If not is it possiblt to suppress the sub item from being derived in SAP using some user exit in sales order processing?
    For an IDOC I could have used standard SAP tables to identify SAP material number based on UPC code. However the problem is we have multiple SAP material numbers assigned to one UPC code. So it is not possible to identify a unique material number just based on the UPC code.
    I would like to know if any of you experts have encountered a similar situation and if so what is the ideal way to resolve this issue. Any comments/suggestions/guidance is welcome. You can also reply at my e-mail id [email protected].
    Thanks

    Hi Daniel,
    Can you please which IDoc message type you are using to create sales order using IDoc?
    Also check in IDoc, what is the value of ACTION & EINKZ fields in segment E1EDP01?
    Regards,
    Amit

  • Multiple UPC / Barcodes assigned to an Item

    Quick Question has anybody run into a need to have multiple UPC Codes point back to one item?
    I have customer that uses their own Item codes but can purchase multiple items that they sell as one of their Itrems
    We have a need for multiple UPC Codes to be assigned to the One item code in th eItem mast file.  Has anybody tackled this challange and if so, how did the do it?
    Thanks in advance
    Dana

    Hi Dana
    You cannot specify to unique id ......If you are using database field Itemcode ,It is not possible .
    You have to find l relation like Many to One -
    Hope this helps
    Bishal

  • EAN/UPC CODE and PURCHASING GRID

    Hi Experts,
    In material master can you please let me know how to configure,
    1)    EAN/UPC Code configuration in Material Master
    2)    Purchasing grid
    I need the info urgently.
    Regards,
    Subha

    Hi Subha,
    1)The EAN/UPC's configuration is done in the path
    SPRO>Logistics general>Material Master>Settings for key fields>Internal article numbers:
    Here we can define external or internal number ranges for the EAN's.We can also define the prefix for EAN/UPCs and define the attributes of the EAN/UPCs.
    2) Grids are used in AFS(Appearl and Footware system).There are material grid,purchase grid and sales grids in Appearl and footware industry.
    We have to define Charecterstics and using them we have to define a grid(matrix type).While creating a material master this purchase grid has to be assigned in the AFSpurchasing view of the AFS material.
    For example--Shirt(material)- Silk cloth white colour 40 size,Silk cloth golden colour 42 size,cotton cloth blue colour 40 size.Here cloth,colour,size are the 3 charecters.Using these 3 charecters a grid is created.This grid is assigned to the material.With this we can have n number of combinations for a single material.
    Regards,
    Rambhupal

  • EAN/UPC code.... CARTON-ID (13 digit)  as HU ID in EWM

    Hi All,
    My client currently uses EAN/UPC code.... CARTON-ID (13 digit) as an which vendor will print on CARTON and send it.
    Its  sap IS-Retails system . No HU-managed and No Sap WM managed.
    Now client is going for EWM impl, where it requires HU ID Number to automate follow-on process.  Client is asking US to use the same CARTON-ID  as HU ID in EWM process. ( we suggested to assign Number range to Vendors or Stick HU labels Manually at warehouse to automate the process)
    It is possible to use CARTON-ID as HU ID number in EWM?  kindly suggest very urgent.
    Thanks in Advance

    Hi Rahman,
    Lets assume you are dealing with outbound deliveries and you have raised an outbound delivery in ERP and this gets replicated to EWM.
    When you do the picking and packing for this delivery, it would look for packing profile behind the Warehouse order and when it creates an HU, it asks for HU or takes it from preceding document.
    This again depends on the Number range you defined.
    There is a BADI /SCWM/EX_WHO_DSTGRP, which you could control to pass your own HU id here(Could be for example your carton ID).
    You could use similar concept with slight modifications during your goods receipt also.
    Regards,
    Kishore

  • Is there a way to automate the tax code assignation on non PO documents lik

    I'm looking for a way to automate the tax code assignation on purchases, I'm aware of the condition techniques for POs, but I would like to understand if it can be also applied to the other document in purchases so we can have a totally automate process on tax code assignation.
    Documents like: Contracts, Info records, RFQ, Scheduling agreements, Outline Agremments

    What you need to do is to create condition tables & access sequences for condition type NAVS for purchasing documents like RFQ, Contract & Scheduling agreement. You can use the document types and document category to differentiate these. Obviously this is required only if your tax determination scenario is different between different document type, if the tax code to be determined is not linked to purchasing document type, then you only one access sequence which can have parameteris like PORG, vendor if required etc. which are common to all document types.
    Once this configuration is done, then you need to maintain condition records using transaction MEK1 and maintain the tax codes as per the combination of parameters.
    In case of Info-record, it is different as it is a master data and this automatic tax determination will not work there.

  • Upc codes in Pages document

    I have a requirement to scan the UPC code on a product (with a handheld laser scanner) and have that UPC print on a Pages document.
    So far I've installed a UPC font, but the code that is generated from the scan is not scannable when the document is printed out. 
    Question:  How do I get what I'm scanning to be represented properly by the UPC font? Or is this not doable?
    Any helpful suggestions would be greatly appreciated.
    -GMO

    An AppleScript could perform the "ton of gyrations" for you.
    If the scan produces a twelve digit number, with no hyphen in the middle, and you copy it to the clipboard, then running this script:
    --Have the twelve digits from the scan on the clipboard
    set raw_list to characters of (the clipboard as text)
    set code_list to item 1 of raw_list as list
    set blue_code to characters of "qwertyuiop"
    set red_code to characters of "asdfghjkl;"
    set Green_code to characters of "zxcvbnm,./"
    repeat with i from 2 to 6
      my mydecode(blue_code, (item i of raw_list))
      set end of code_list to result
    end repeat
    set end of code_list to "-"
    repeat with i from 7 to 11
      my mydecode(red_code, (item i of raw_list))
      set end of code_list to result
    end repeat
    my mydecode(Green_code, (item 12 of raw_list))
    set end of code_list to result
    set the clipboard to code_list as text
    on mydecode(alist, anum)
      if (anum as number) = 0 then
      return item 10 of alist
      else
      return item (anum as number) of alist
      end if
    end mydecode
    --end of script
    will place a string of characters on the clipboard that will display as the barcode in the CarolinaBarUPC font. (In Pages '09, on Snow Leopard, at any rate.)

  • How to consolidate the financial statements for 3 company codes, assigned t

    Hi Friends,
    How to consolidate the financial statements for 3 company codes, assigned to 3 different companies, 3 different fiscal years, 3 different controlling areas and all the 3 Company Codes assigned to same chart of accounts in the same client?
    Can we need any ABAP program for this (or) Is it possible using Report Painter?
    Please help me.
    Thanks

    Hi friend,
    Is it a real-time situation or something you are visualising ?
    For consolidation, you can use a group chart of accounts and select that in the operative chart of accounts for consolidation purposes.  This would work provided the company codes use the same operative chart of accounts and fiscal year.
    I hope the above would be helpful to you.
    Regards,

  • If Tax code assigned to company code thn in PO Taxes not calcuated properly

    Hello friends,
    Comapny codes 2001
    I have created a New Input tax Code - AP
    Desc - Input (10%Excise + 2%Ecess 1%HEcess + 4% Vat )
    Basic Excise - 10%
    Ecess - 2%
    HEcess -1%
    Vat - 4%
    I have maintained the Tax code in FTXP & also the corresponding Percentage in FV12,
    As i wanted to load it on Inventory i have given Acct key as NVV.
    I have also assigned the Tax code to Company Code
    JMIP  Basic Excise     10%             NVV
    JEC2  E Cess                2%            NVV
    JSEI   HEcess               1%            NVV
    JVRD Vat                      4%     
    Issue - If i select Tax code - AP check on Display Taxes JMIP & JEC2 are not calculated only JSEI  & Vat- 1% & 4% is getting
    calculated.If i remove the comapny code assignment to Tax Code then it is workign properly but at tiem of Miro will fvce problem
    Can any body suggest me how to go around as if is assign to comapny code then i dont get the desired output, if
    dont assign tax code then it calcualtes properly.
    I need to assign it to comapny code & want the Tax properly calculated
    Thanks & Regards
    Shashank

    Hi,
    OBCL settings is already maintained.
    & my Key combination is Tax code
    Any other cusotmization?

  • Warehouse receiving using vendor EAN/UPC code

    Is it possible to capture the vendor EAN/UPC code and use this information to receive the goods in the warehouse/plant?
    First issue would be how to deal with duplicate vendor EAN/UPC.
    I have seen many posts where it is possible in IS-AFS but has anyone done this in standard R/3?
    Thanks

    You can certainly search by EAN/UPC when performing GR with MIGO. Click on the binoculars and it's the fifth field available to search via.
    So as long as you have the code set against the material master . . .
    Regards,
    Nick

  • Dummy profit center-company code assignment

    Dear Experts,
    How to deactivate company code assignment in dummy profit center?
    by mistake we selected one company code in dummy profit center, for which profit center accounting is not applicable, so we tried to remove the check box in profit center but in KE52 transaction the company code assignment details are showing in display mode only, please let me know is there any other transaction is there to de activate.
    we are using 5.0 version.
    so far no posting has been done in this profit center.
    Regards
    babu

    Dear Experts,
    Thank you for the replies, we try to remove the assignment fied for the company code in dummy profit center, but it is not editable mode even in change mode (KE52)
    please let me know.
    thanks
    babu

  • Texas Sales and Use Tax - SAP Automatic Tax Code Assignment

    We are an end user industry of materials and services - Refining.  We are also using SAP - 4.6C platform.  What are others in the SAP environment doing to address proper taxing assignment to purchased materials and services in the great state of Texas? As you may be aware the Texas State Sales and Use tax rules are probably the most difficult to understand and comply with that exist. I am embarking on developing a custom solution to automatically assign the proper tax code on purchase orders depending on key indicators associated with maintenance orders and material groups, etc.

    The Sales and Use tax code assignment can be handled at the creation of the purchase order for plan purchases of goods and services, and at the accounts payable level when the invoice is process.  At each step the necessary tax code must be populated on the jurisdiction field.

  • Help! where is upc code on macbook pro

    I am trying to sell my macbook pro on ebay and they require a UPC code. Where can I find it on my computer? I don't have the original box

    The UPC code would not be on the computer, just on the retail display box. It doesn't have to be your box, just a box for some computer of the same model and configuration.
    If you are being asked for a UPC, you must be using the advanced selling tool. Try the alternative of using keywords to describe the item instead of a UPC. You may have to add a number of keywords to narrow it down to a specific model and specific attributes, but you can still get there.

  • How to find T-Code assigned to ABAP Query...

    Hi All,
    I have ABAP query, Infoset and user grp with me.
    Can anybody let me know, how to find the T-code assigned to this ABAp Query.
    Regards,
    Sanjay

    Hi.
    In SQ01 tcode .. Check the Program attached to the SAP Query .
    Then Goto Tcode SE93 and Open this Program.
    There you can find the (Transactions)Tcodes created for this program.
    Note: You can also check in TSTC table using the Program name. It a Tcode is already created for ur Query then it will be in TSTC.
    REWARD IF HELPFUL,

  • Need UPC code for my Macbook Pro 4,1

    This is an older unit, MB166LL/A; in order to list on amazon.com, they require a UPC code which typically is only found on the box.
    I'm guessing that this would be the same code for matching models. Mine has the 2.6GHz processor, and backlit display.
    Here's the exact info via Apple Specs
    Does anyone have an old box or perhaps the correct UPC number for this excact model?
    Is there a way that SApple can provide this if not?
    Thanks!

    Phone AppleCare and order them. Alternatively, if you don't need iLife or the Apple Hardware Test, you can just use a retail Mac OS X 10.6 DVD.
    (87076)

Maybe you are looking for