Upconvert LV5.0.1 to LV 2010 PID

Hi everyone,
could someone please convert the attached VI's from Labview 5.0.1 to Labview 2010?
Thanks so much!
Solved!
Go to Solution.
Attachments:
simple_pid_demo.zip ‏120 KB

http://forums.ni.com/t5/LabVIEW/Upconvert-VI-Requests/m-p/1630608#M587839

Similar Messages

  • LabVIEW 2010 PID and Fuzzy Logic Toolkit

    Where can I download the evaluation software for the following:
    LabVIEW 2010 PID and Fuzzy Logic Toolkit
    Solved!
    Go to Solution.

    We only have the latest version available for download and evaluation from here
    I would suggest contacting your local sales representative and they can ship you a CD of the 2010 evaluation version via www.ni.com/ask
    Kind Regards,
    Rob 
    Applications Engineer

  • Upconvert from LabVIEW 5.1 to 2010

    Hi! Can someone kindly help me on upconverting the attached files into 2010 version?
    Thanks in advance!
    Attachments:
    regimen automático.vi ‏82 KB

    Hi,
    You read it now but Trad. DAQ VI's are missing.
    Kees
    Attachments:
    regimen automático.vi ‏66 KB

  • Upconvert vxistubs and _vxitls to labview 2010

    Hi,
    Coud you please upconvert the ni vxi utilities in the libraries of the attached files to labview 2010? I tried to use these and labview stated they were too old for my labview to convert
    Thank you very much for your help
    Attachments:
    vxistubs.zip ‏94 KB
    _vxitls.zip ‏177 KB

    I hate to tell you this, but that library is obsolete. There's no actual code in the subVIs that actually interface to the hardware. All of the VIs just have the terminals of the controls/indicators on the block diagram, and that's it. That library is obsolete. Check the Drivers section of the NI site (click Support) in the menu bar to find the updated drivers.

  • Upconvert 5.1 to 2010

    Hi,
    Could someone please upconvert these 5.1 VIs to 2010, please?
    Thank you!
    Solved!
    Go to Solution.
    Attachments:
    Powspec.vi ‏81 KB
    Integrl2.vi ‏26 KB
    1Wanova.vi ‏43 KB

    attached
    Attachments:
    1Wanova.vi ‏9 KB
    Integrl2.vi ‏9 KB
    Powspec.vi ‏22 KB

  • CUE/CME - transfer of VM locks up phone until the call is manually cleared

    Have a 2821 with IOS 12.3(14)T2 and NM-CUE 2.1(1)
    When a user accidentally transfers their VM wrong their phone gets a state where it can't place/receive calls (no dialtone, etc) until the call is cleared on router manually by an admin.
    What the user is doing sometimes (by accident) is they check their VM and instead of choosing option 5 to fwd the VM, they are hitting transfer on their phone the extension they have to do a direct transfer to VM. When they do this is when the phone gets in this state.
    It is stuck in the below state.
    CME# show voice call summ | inc 50/0/5
    50/0/50 .1 None - S_CONNECT EFXS_WAIT_RELEASE_REQ
    50/0/51 .1 - - - EFXS_ONHOOK
    Until the call is cleared manually (clear call voice causecode 1 id 1E5B)
    1E5B : 188609 -1567535748ms.1 +2010 pid:20050 Answer 7915 active
    dur 00:05:29 tx:0/0 rx:2131/340960
    Tele 50/0/50 (188609) [50/0/50.0] tx:0/0/0ms g711ulaw noise:0 acom:0
    i/0:0/0 dBm

    This problem is possibly due to the bug CSCdw38541.

  • Vsftpd and large downloads - cache problem

    Today I have raised vsftpd to transfer a lot of files (~30 GB) to my friend's machine. At start all was ok - full download speed was 2 MB/s, and iotop showed these MB's read from FS. When about 4 GB where downloaded  from me, strange things happened. Despite config file (max_clients and max_per_ip were 10, friend was using 10 simulateonous connections in filezilla), many following messages appeared in log (xxx.xxx.xxx.xxx - friend's address):
    Tue Aug 24 16:30:05 2010 [pid 2] CONNECT: Client "xxx.xxx.xxx.xxx", "Connection refused: too many sessions."
    Also the speed felt dramatically - at start there was ~220 KB/s per connection, now lower than 10 KB/s. iotop shows only eventual 124 KB reads from vsftpd. Cache filled all my memory (600 MB data - it's running KDE4 plus some documents and Opera opened):
    $ free -m
    total used free shared buffers cached
    Mem: 3862 3806 55 0 441 2766
    -/+ buffers/cache: 599 3263
    Swap: 2047 0 2047
    Also responsiveness of system changed strangely - operations with disk are as fast as usual, but with RAM became much slower. E.g., I use pacman-cage, and now pacman -Syu works many times slower. I know that reboot would take away this problem, but it's only partial solution.
    Is it the intended caching behavior? (IMO, it's rather not)
    How can be I/O optimized to not to overload cache?
    P.S. My vsftpd.conf:
    listen=YES
    # User access parameters
    anonymous_enable=YES
    anon_upload_enable=NO
    local_enable=YES
    write_enable=NO
    download_enable=YES
    connect_from_port_20=YES
    # Userlist
    #userlist_deny=NO
    userlist_enable=NO
    #userlist_file=/etc/vsftpd/vsftpd_users
    force_dot_files=YES
    hide_ids=YES
    deny_file={lost+found}
    ls_recurse_enable=YES
    local_umask=026
    ascii_download_enable=NO
    # Limits
    max_clients=10
    max_per_ip=10
    #connect_timeout=60
    data_connection_timeout=3000
    idle_session_timeout=6000
    # Messages
    dirlist_enable=YES
    dirmessage_enable=YES
    ftpd_banner=Welcome to Stonehenge-III FTP archive
    # Encryption
    ssl_enable=NO
    allow_anon_ssl=NO
    force_local_data_ssl=NO
    force_local_logins_ssl=NO
    ssl_tlsv1=YES
    ssl_sslv2=NO
    ssl_sslv3=NO
    rsa_cert_file=/etc/vsftpd/vsftpd.pem
    pam_service_name=vsftpd
    # Chroot everyone
    chroot_local_user=YES
    passwd_chroot_enable=YES
    chroot_list_enable=NO
    #local_root=/srv/ftp/
    # Logging
    xferlog_enable=YES
    P.P.S. Tried to find appropriate forum. If I was wrong, please move it to a better one.

    since your on a fast network, lower your timeout values, they are much too high, also, increase your connections to 15, but tell your friend to only download using 10 or lower connections.
    are the files downloaded small (many files) or large ones. check /var/log/everything.log for related error messages, e.g, I/O, file descriptors.

  • Upgrading our WLC2100 series

    We have a WLC 2100 series controller running on our LAN, its started having alot of problems and needs rebooting every 30 mins before anyone can connect.
    We've just noticed the software its running is - 4.0.217.0, to upgrade we need to incrementaly go to version 4.2.176.0 although this doesnt appear to be available for download anymore.
    Can we jump straight to version 5.x??

    Every 30 mins the WLC would disapear of the LAN and only a reboot would bring it back.
    The Tech Support - "Crash report" has this in it repeatedly....
    Beginning of Crash File: mwar_dump2.crash
    *             Start Cisco Crash Handler                *
    Version:   4.0.217.0
    Timestamp: Thu Dec 16 13:50:02 2010
    pid:       141
    TID:       37925
    Task Name: pemReceiveTask
    Reason:  Reaper Reset
    timer tcb:   0x9
    timer cb:    0x814b9c0 ('rrmSendTimerMsg+224')
    timer arg1:  0xac0e1d4
    timer arg2:  0x0
    Analysis of Failure:
      Software was stopped by the reaper for the following reason:
         Reaper Reset: Task "pemReceiveTask" missed software watchdog
    System Stack
        Frame 0: 0x08051d72: sighup_handler+42
        Frame 1: 0x4018608c: ssh_ldap_client_enable_tls+932996688
        Frame 2: 0x401bf950: ssh_ldap_client_enable_tls+933232404
        Frame 3: 0x0825f9f9: hapiBroffuSendIoctl+613
        Frame 4: 0x08250fae: dapiCtl+1106
        Frame 5: 0x081baf2e: dtlBsnFdbMacAddrDelete+278
        Frame 6: 0x082cc129: pemDelScb+269
        Frame 7: 0x082cc7d9: pemReceiveTaskEntry+301
        Frame 8: 0x081f8ffd: osapiErrnoGet+405
        Frame 9: 0x40183040: ssh_ldap_client_enable_tls+932984324
        Frame 10: 0x40262cfa: ssh_ldap_client_enable_tls+933900990
    Stacks from all busy tasks
    Task pemReceiveTask is consuming 0% (0% user, 0% system)
    Stackdump from pemReceiveTask
        Frame 0: 0x08051d72: sighup_handler+42
        Frame 1: 0x4018608c: ssh_ldap_client_enable_tls+932996688
        Frame 2: 0x401bf950: ssh_ldap_client_enable_tls+933232404
        Frame 3: 0x0825f9f9: hapiBroffuSendIoctl+613
        Frame 4: 0x08250fae: dapiCtl+1106
        Frame 5: 0x081baf2e: dtlBsnFdbMacAddrDelete+278
        Frame 6: 0x082cc129: pemDelScb+269
        Frame 7: 0x082cc7d9: pemReceiveTaskEntry+301
        Frame 8: 0x081f8ffd: osapiErrnoGet+405
        Frame 9: 0x40183040: ssh_ldap_client_enable_tls+932984324
        Frame 10: 0x40262cfa: ssh_ldap_client_enable_tls+933900990
    Semaphore and Mutex Usage
       Mutex 'sshpmTftpRuleSemaphorePtr' @ 0xaa33f1c  Created fp_main_task(sshpm.c:366)
          Locked by sshpmReceiveTask(sshpmrecv.c:1180)
          0 tasks waiting for resource.
    Stackdump from sshpmReceiveTask
        Frame 0: 0x08051d72: sighup_handler+42
        Frame 1: 0x4018608c: ssh_ldap_client_enable_tls+932996688
        Frame 2: 0x401bf950: ssh_ldap_client_enable_tls+933232404
        Frame 3: 0x401858cd: ssh_ldap_client_enable_tls+932994705
        Frame 4: 0x401820a9: ssh_ldap_client_enable_tls+932980333
        Frame 5: 0x0857db0e: d_async_queue_pop+58
        Frame 6: 0x081f5bc4: osapiMessageReceive+32
        Frame 7: 0x0819d444: sshpmReceiveTaskEntry+644
        Frame 8: 0x081f8ffd: osapiErrnoGet+405
        Frame 9: 0x40183040: ssh_ldap_client_enable_tls+932984324
        Frame 10: 0x40262cfa: ssh_ldap_client_enable_tls+933900990
       Memory Information
    System Memory Information:
                 Total System Memory: 256724992 bytes (244.84 Mb)
                  Used System Memory: 129019904 bytes (123.05 Mb)
                  Free System Memory: 127705088 bytes (121.79 Mb)
    Heap information:
             Bytes alloced from RTOS: 4146604 bytes (3.95 Mb)
                         Chunks free: 32 bytes
           Number of mmapped regions: 21
      Total space in mmapped regions: 17801216 bytes (16.97 Mb)
               Total allocated space: 4098364 bytes (3.90 Mb)
               Total non-inuse space: 48240 bytes (47.10 Kb)
          Top-most, releasable space: 2808 bytes (2.74 Kb)
         Total allocated (incl mmap): 21947820 bytes (20.93 Mb)
              Total used (incl mmap): 21899580 bytes (20.88 Mb)
              Total free (incl mmap): 48240 bytes (47.10 Kb)
      Buffer Pooled Malloc Usage
    Pool[00]: 16 byte chunks
        chunks in pool:    800
        chunks in use:     688
        bytes in use:      11008
        bytes requested:   7410 (3598 overhead bytes)
    Pool[01]: 64 byte chunks
        chunks in pool:    8300
        chunks in use:     8243
        bytes in use:      527552
        bytes requested:   323145 (204407 overhead bytes)
    Pool[02]: 128 byte chunks
        chunks in pool:    5500
        chunks in use:     5408
        bytes in use:      692224
        bytes requested:   459229 (232995 overhead bytes)
    Pool[03]: 256 byte chunks
        chunks in pool:    200
        chunks in use:     140
        bytes in use:      35840
        bytes requested:   23236 (12604 overhead bytes)
    Pool[04]: 1024 byte chunks
        chunks in pool:    300
        chunks in use:     246
        bytes in use:      251904
        bytes requested:   97960 (153944 overhead bytes)
    Pool[05]: 2048 byte chunks
        chunks in pool:    100
        chunks in use:     33
        bytes in use:      67584
        bytes requested:   38852 (28732 overhead bytes)
    Pool[06]: 4096 byte chunks
        chunks in pool:    50
        chunks in use:     38
        bytes in use:      155648
        bytes requested:   110254 (45394 overhead bytes)
    Max number of Mbufs:     1536
    number of Mbufs Free:    1531
    number of Mbufs In Use:  5
       Interrupt Status
          Name            Total Interupts   PerSecond
    0: Misc                 390360           100
    4:  qŠ                     208             0
    7:  qŠ                       2             0
    11:  qŠ                  201649            52
    14:  qŠ                    2924             0
    Message Logs
    Thu Dec 16 13:40:35 2010  [ERROR] spam_lrad.c 13270: Unable to send Delete-Mobile request to unknown AP 00:0a:b8:cb:b2:80
    Thu Dec 16 13:40:15 2010  [ERROR] spam_tmr.c 565: Did not receive hearbeat reply from AP 00:0a:b8:cb:b2:80
    Thu Dec 16 13:40:04 2010  [ERROR] tftp_client.c 414: TFTP server timed out! (Connection Timeout)
    Thu Dec 16 13:40:02 2010  [ERROR] spam_tmr.c 565: Did not receive hearbeat reply from AP 00:0a:b8:cb:92:f0
    Thu Dec 16 13:40:02 2010  Previous message occurred 2 times
    Thu Dec 16 13:37:47 2010  [WARNING] dapi.c 336: call to hapi failed for usp 0,0,0, cmd 41
    Thu Dec 16 13:37:47 2010  [SECURITY] aaa.c 666: Authentication succeeded for network user 'wendy'
    Thu Dec 16 13:37:47 2010  Previous message occurred 7 times
    Thu Dec 16 13:21:16 2010  [WARNING] dapi.c 336: call to hapi failed for usp 0,0,0, cmd 41
    Thu Dec 16 13:18:21 2010  [VERBOSE] sshpmrecv.c 868: pemUpdatedMobileIpAddress @ pem_api.c:2747: request to delete rule with Id SSH_IPSEC_INVALID_INDEX (0xddffffff)
    Thu Dec 16 13:16:33 2010  [VERBOSE] sshpmrecv.c 868: pemUpdatedMobileIpAddress @ pem_api.c:2747: request to delete rule with Id SSH_IPSEC_INVALID_INDEX (0xddffffff)
    Thu Dec 16 13:16:33 2010  Previous message occurred 2 times
    Thu Dec 16 13:14:54 2010  [WARNING] dapi.c 336: call to hapi failed for usp 0,0,0, cmd 41
    Thu Dec 16 13:14:49 2010  [WARNING] dapi.c 336: call to hapi failed for usp 0,0,0, cmd 41
    Thu Dec 16 13:14:49 2010  Previous message occurred 3 times
    Thu Dec 16 13:10:27 2010  [SECURITY] aaa.c 661: Authentication succeeded for admin user 'ACSwirelessadmin'
    Thu Dec 16 13:08:42 2010  [WARNING] dapi.c 336: call to hapi failed for usp 0,0,0, cmd 41
    Thu Dec 16 13:07:57 2010  [SECURITY] aaa.c 661: Authentication succeeded for admin user 'admin'
    Thu Dec 16 13:05:51 2010  [WARNING] dapi.c 336: call to hapi failed for usp 0,0,0, cmd 41
    Thu Dec 16 13:05:46 2010  [WARNING] dapi.c 336: call to hapi failed for usp 0,0,0, cmd 41
    Thu Dec 16 13:05:46 2010  Previous message occurred 12 times
    Thu Dec 16 13:01:30 2010  [WARNING] radius_db.c 2149: Unable to find a valid RADIUS server
    Thu Dec 16 13:01:06 2010  [WARNING] dapi.c 336: call to hapi failed for usp 0,0,0, cmd 41
    Thu Dec 16 13:01:06 2010  Previous message occurred 4 times
    Thu Dec 16 13:00:23 2010  [WARNING] radius_db.c 2149: Unable to find a valid RADIUS server
    Thu Dec 16 13:00:02 2010  [WARNING] dapi.c 336: call to hapi failed for usp 0,0,0, cmd 41
    Thu Dec 16 13:00:02 2010  Previous message occurred 4 times
    Thu Dec 16 12:59:16 2010  [WARNING] radius_db.c 2149: Unable to find a valid RADIUS server
    Thu Dec 16 12:58:57 2010  [WARNING] dapi.c 336: call to hapi failed for usp 0,0,0, cmd 41
    Thu Dec 16 12:58:52 2010  [WARNING] dapi.c 336: call to hapi failed for usp 0,0,0, cmd 41
    Thu Dec 16 12:58:52 2010  Previous message occurred 16 times
    Thu Dec 16 12:54:48 2010  [WARNING] radius_db.c 2149: Unable to find a valid RADIUS server
    Thu Dec 16 12:53:51 2010  [SECURITY] aaa.c 661: Authentication succeeded for admin user 'ACSwirelessadmin'
    Thu Dec 16 12:53:49 2010  [SECURITY] aaa.c 661: Authentication succeeded for admin user 'ACSwirelessadmin'
    Thu Dec 16 12:53:49 2010  Previous message occurred 4 times
    Thu Dec 16 12:53:41 2010  [WARNING] radius_db.c 2149: Unable to find a valid RADIUS server
    Thu Dec 16 12:53:17 2010  [SECURITY] aaa.c 661: Authentication succeeded for admin user 'admin'
    Thu Dec 16 12:53:12 2010  [SECURITY] aaa.c 661: Authentication failed for admin user 'adim'
    Thu Dec 16 12:53:12 2010  [WARNING] radius_db.c 2149: Unable to find a valid RADIUS server
    Thu Dec 16 12:53:12 2010  [SECURITY] file_db.c 1443: Username & password must be supplied (user = 0xaa96dc8, pass=(nil))
    Thu Dec 16 12:53:00 2010  [VERBOSE] file_db.c 1677: Adding user 'admin' to AAA db
    Thu Dec 16 12:52:38 2010  [SECURITY] aaa.c 661: Authentication succeeded for admin user 'ACSwirelessadmin'
    Thu Dec 16 12:52:38 2010  Previous message occurred 2 times
    Thu Dec 16 12:52:37 2010  [WARNING] radius_db.c 2149: Unable to find a valid RADIUS server
    Thu Dec 16 12:52:36 2010  [SECURITY] aaa.c 661: Authentication succeeded for admin user 'ACSwirelessadmin'
    Thu Dec 16 12:52:36 2010  Previous message occurred 2 times
    Thu Dec 16 12:52:34 2010  [WARNING] radius_db.c 2149: Unable to find a valid RADIUS server
    Thu Dec 16 12:52:29 2010  [SECURITY] aaa.c 661: Authentication failed for admin user 'ACSwireless'
    Thu Dec 16 12:52:29 2010  [WARNING] radius_db.c 2149: Unable to find a valid RADIUS server
    Thu Dec 16 12:52:17 2010  [WARNING] dapi.c 336: call to hapi failed for usp 0,0,0, cmd 41
    Thu Dec 16 12:52:12 2010  [SECURITY] aaa.c 661: Authentication failed for admin user 'ACSwireless'
    Thu Dec 16 12:52:12 2010  [WARNING] radius_db.c 2149: Unable to find a valid RADIUS server
    Thu Dec 16 12:51:44 2010  [ERROR] sshpmrules.c 3053: SSHPM: attempting to enable secure shell access when already enabled.
    Thu Dec 16 12:51:36 2010  [SECURITY] aaa.c 661: Authentication succeeded for admin user 'ACSwirelessadmin'
    Thu Dec 16 12:51:35 2010  [SECURITY] aaa.c 661: Authentication succeeded for admin user 'ACSwirelessadmin'
    Thu Dec 16 12:51:35 2010  Previous message occurred 4 times
    Thu Dec 16 12:51:27 2010  [WARNING] radius_db.c 2149: Unable to find a valid RADIUS server
    Thu Dec 16 12:50:54 2010  [WARNING] dapi.c 336: call to hapi failed for usp 0,0,0, cmd 41
    Thu Dec 16 12:50:54 2010  Previous message occurred 2 times
    Thu Dec 16 12:50:20 2010  [WARNING] radius_db.c 2149: Unable to find a valid RADIUS server
    Thu Dec 16 12:49:31 2010  [WARNING] dapi.c 336: call to hapi failed for usp 0,0,0, cmd 41
    Thu Dec 16 12:49:31 2010  Previous message occurred 4 times
    Thu Dec 16 12:49:13 2010  [WARNING] radius_db.c 2149: Unable to find a valid RADIUS server
    Thu Dec 16 12:48:29 2010  [WARNING] dapi.c 336: call to hapi failed for usp 0,0,0, cmd 41
    Thu Dec 16 12:48:29 2010  Previous message occurred 4 times
    Thu Dec 16 12:48:06 2010  [WARNING] radius_db.c 2149: Unable to find a valid RADIUS server
    Thu Dec 16 12:47:47 2010  [WARNING] dapi.c 336: call to hapi failed for usp 0,0,0, cmd 41
    Thu Dec 16 12:47:39 2010  [SECURITY] aaa.c 661: Authentication succeeded for admin user 'ACSwirelessadmin'
    Thu Dec 16 12:47:34 2010  [SECURITY] aaa.c 661: Authentication succeeded for admin user 'ACSwirelessadmin'
    Thu Dec 16 12:47:34 2010  Previous message occurred 2 times
    Thu Dec 16 12:47:05 2010  [WARNING] dapi.c 336: call to hapi failed for usp 0,0,0, cmd 41
    Thu Dec 16 12:47:03 2010  [VERBOSE] sshpmrecv.c 868: pemUpdatedMobileIpAddress @ pem_api.c:2747: request to delete rule with Id SSH_IPSEC_INVALID_INDEX (0xddffffff)
    Thu Dec 16 12:47:03 2010  [WARNING] radius_db.c 2149: Unable to find a valid RADIUS server
    Thu Dec 16 12:47:01 2010  [VERBOSE] sshpmrecv.c 868: pemUpdatedMobileIpAddress @ pem_api.c:2747: request to delete rule with Id SSH_IPSEC_INVALID_INDEX (0xddffffff)
    Thu Dec 16 12:46:59 2010  [WARNING] radius_db.c 2149: Unable to find a valid RADIUS server
    Thu Dec 16 12:46:33 2010  [ERROR] spam_lrad.c 1897: AP 00:0a:b8:cb:92:f0 associated. Last AP failure was due to Link Failure, reason:     ECHO_REQUEST
    Thu Dec 16 12:46:31 2010  [VERBOSE] spam_lrad.c 1346: nimMcastApplianceGetPortMap return error for interface 1 -- returning default index 49
    Thu Dec 16 12:46:29 2010  [WARNING] dapi.c 336: call to hapi failed for usp 0,0,0, cmd 41
    Thu Dec 16 12:46:29 2010  Previous message occurred 2 times
    Thu Dec 16 12:46:22 2010  [SECURITY] aaa.c 661: Authentication succeeded for admin user 'ACSwirelessadmin'
    Thu Dec 16 12:46:17 2010  [ERROR] spam_lrad.c 1897: AP 00:0a:b8:cb:b2:80 associated. Last AP failure was due to Link Failure, reason:     ECHO_REQUEST
    Thu Dec 16 12:46:14 2010  [VERBOSE] spam_lrad.c 1346: nimMcastApplianceGetPortMap return error for interface 1 -- returning default index 48
    Thu Dec 16 12:46:14 2010  Previous message occurred 4 times
    Thu Dec 16 12:46:09 2010  [WARNING] dapi.c 336: call to hapi failed for usp 0,0,0, cmd 41
    Thu Dec 16 12:45:52 2010  [WARNING] osapi_task.c 2071: Reaper cleaning up exited task 'SNMPCfgTask' (0x930bfe0)
    Thu Dec 16 12:45:52 2010  [WARNING] osapi_task.c 2071: Reaper cleaning up exited task 'cliWebTask' (0x9316980)
    Thu Dec 16 12:45:42 2010  [VERBOSE] gid.c 495: GID: Port # 1 is not found.
    Thu Dec 16 12:45:42 2010  [VERBOSE] nvstore.c 255: Creating default configuration for 'mesh.cfg'
    Thu Dec 16 12:45:42 2010  [VERBOSE] nvstore.c 248: Failed to read 'mesh.cfg' (size 400)
    Thu Dec 16 12:45:38 2010  [ERROR] sshpmrules.c 3053: SSHPM: attempting to enable secure shell access when already enabled.
    Thu Dec 16 12:45:38 2010  [VERBOSE] nvstore.c 255: Creating default configuration for 'cliWebInitParms.cfg'
    Thu Dec 16 12:45:38 2010  [VERBOSE] nvstore.c 248: Failed to read 'cliWebInitParms.cfg' (size 368)
    Thu Dec 16 12:45:38 2010  [VERBOSE] nvstore.c 255: Creating default configuration for 'cids.cfg'
    Thu Dec 16 12:45:38 2010  [VERBOSE] nvstore.c 248: Failed to read 'cids.cfg' (size 1356)
    Thu Dec 16 12:45:38 2010  [WARNING] apf_site_override.c 834: Unable to load APF Site configuration
    Thu Dec 16 12:45:38 2010  [VERBOSE] nvstore.c 255: Creating default configuration for 'rfidCfg.cfg'
    Thu Dec 16 12:45:38 2010  [VERBOSE] nvstore.c 248: Failed to read 'rfidCfg.cfg' (size 356)
    Thu Dec 16 12:45:38 2010  [VERBOSE] nvstore.c 255: Creating default configuration for 'rfidInitParms.cfg'
    Thu Dec 16 12:45:38 2010  [VERBOSE] nvstore.c 248: Failed to read 'rfidInitParms.cfg' (size 356)
    Thu Dec 16 12:45:38 2010  Previous message occurred 17 times
    Thu Dec 16 12:45:38 2010  [VERBOSE] sig_v1.c 290: Signature Interval set to default
    Thu Dec 16 12:45:38 2010  [VERBOSE] dhcpd.c 76: dhcp server: binding to 0.0.0.0
    Thu Dec 16 12:45:38 2010  [VERBOSE] nvstore.c 255: Creating default configuration for 'sig.cfg'
    Thu Dec 16 12:45:38 2010  [VERBOSE] nvstore.c 248: Failed to read 'sig.cfg' (size 348)
    Thu Dec 16 12:45:38 2010  [WARNING] dhcp_config.c 496: NPU/Driver DHCP CHADDR Filter disabled
    Thu Dec 16 12:45:38 2010  [VERBOSE] nvstore.c 255: Creating default configuration for 'dhcpServer.cfg'
    Thu Dec 16 12:45:38 2010  [VERBOSE] nvstore.c 248: Failed to read 'dhcpServer.cfg' (size 8028)
    Thu Dec 16 12:45:38 2010  [VERBOSE] nvstore.c 255: Creating default configuration for 'dhcpParms.cfg'
    Thu Dec 16 12:45:38 2010  [VERBOSE] nvstore.c 248: Failed to read 'dhcpParms.cfg' (size 356)
    Thu Dec 16 12:45:38 2010  [VERBOSE] nvstore.c 255: Creating default configuration for 'bcastInitParms.cfg'
    Thu Dec 16 12:45:38 2010  [VERBOSE] nvstore.c 248: Failed to read 'bcastInitParms.cfg' (size 356)
    Thu Dec 16 12:45:38 2010  [VERBOSE] nvstore.c 255: Creating default configuration for 'cdp.tcfg'
    Thu Dec 16 12:45:38 2010  [VERBOSE] nvstore.c 248: Failed to read 'cdp.tcfg' (size 108)
    Thu Dec 16 12:45:38 2010  [VERBOSE] nvstore.c 255: Creating default configuration for 'sntp.cfg'
    Thu Dec 16 12:45:38 2010  [VERBOSE] nvstore.c 248: Failed to read 'sntp.cfg' (size 1644)
    Thu Dec 16 12:45:37 2010  [VERBOSE] nvstore.c 255: Creating default configuration for 'rrmInitParms.cfg'
    Thu Dec 16 12:45:37 2010  [VERBOSE] nvstore.c 248: Failed to read 'rrmInitParms.cfg' (size 488)
    Thu Dec 16 12:45:37 2010  [VERBOSE] nvstore.c 255: Creating default configuration for 'watchlist.cfg'
    Thu Dec 16 12:45:37 2010  [VERBOSE] nvstore.c 248: Failed to read 'watchlist.cfg' (size 8544)
    Thu Dec 16 12:45:37 2010  [VERBOSE] apf_cfg_v2.c 721: Loading VAP Config 17 - SSID '', VAP ID 0
    Thu Dec 16 12:45:37 2010  [VERBOSE] apf_cfg_v2.c 721: Loading VAP Config 16 - SSID '', VAP ID 0
    Thu Dec 16 12:45:37 2010  [VERBOSE] apf_cfg_v2.c 721: Loading VAP Config 15 - SSID '', VAP ID 0
    Thu Dec 16 12:45:37 2010  [VERBOSE] apf_cfg_v2.c 721: Loading VAP Config 14 - SSID '', VAP ID 0
    Thu Dec 16 12:45:37 2010  [VERBOSE] apf_cfg_v2.c 721: Loading VAP Config 13 - SSID '', VAP ID 0
    Thu Dec 16 12:45:37 2010  [VERBOSE] apf_cfg_v2.c 721: Loading VAP Config 12 - SSID '', VAP ID 0
    Thu Dec 16 12:45:37 2010  [VERBOSE] apf_cfg_v2.c 721: Loading VAP Config 11 - SSID '', VAP ID 0
    Thu Dec 16 12:45:37 2010  [VERBOSE] apf_cfg_v2.c 721: Loading VAP Config 10 - SSID '', VAP ID 0
    Thu Dec 16 12:45:37 2010  [VERBOSE] apf_cfg_v2.c 721: Loading VAP Config 9 - SSID '', VAP ID 0
    Thu Dec 16 12:45:37 2010  [VERBOSE] apf_cfg_v2.c 721: Loading VAP Config 8 - SSID '', VAP ID 0
    Thu Dec 16 12:45:37 2010  [VERBOSE] apf_cfg_v2.c 721: Loading VAP Config 7 - SSID '', VAP ID 0
    Thu Dec 16 12:45:37 2010  [VERBOSE] apf_cfg_v2.c 721: Loading VAP Config 6 - SSID '', VAP ID 0
    Thu Dec 16 12:45:37 2010  [VERBOSE] apf_cfg_v2.c 721: Loading VAP Config 5 - SSID '', VAP ID 0
    Thu Dec 16 12:45:37 2010  [VERBOSE] apf_cfg_v2.c 721: Loading VAP Config 4 - SSID '', VAP ID 0
    Thu Dec 16 12:45:37 2010  [VERBOSE] sim.c 8415: simVlanPortNpuAdd: vlan=10, port=1, portBitMap=1
    Thu Dec 16 12:45:37 2010  [VERBOSE] apf_cfg_v2.c 721: Loading VAP Config 3 - SSID 'ACS-Guest', VAP ID 3
    Thu Dec 16 12:45:37 2010  [VERBOSE] sim.c 8415: simVlanPortNpuAdd: vlan=2, port=1, portBitMap=1
    Thu Dec 16 12:45:37 2010  [VERBOSE] apf_cfg_v2.c 721: Loading VAP Config 2 - SSID 'ACS-VOIP', VAP ID 2
    Thu Dec 16 12:45:37 2010  [VERBOSE] sim.c 8415: simVlanPortNpuAdd: vlan=0, port=1, portBitMap=1
    Thu Dec 16 12:45:37 2010  [VERBOSE] apf_api.c 8959: Created WARP Capabilities IE (length 12) for WLAN ACS-Wireless
    Thu Dec 16 12:45:37 2010  [VERBOSE] apf_cfg_v2.c 721: Loading VAP Config 1 - SSID 'ACS-Wireless', VAP ID 1
    Thu Dec 16 12:45:37 2010  [VERBOSE] apf_cfg_v2.c 721: Loading VAP Config 0 - SSID '', VAP ID 0
    Thu Dec 16 12:45:37 2010  [VERBOSE] apf.c 2336: Support 256 mobile clients!
    Thu Dec 16 12:45:37 2010  [VERBOSE] nvstore.c 255: Creating default configuration for 'apfInitParms.cfg'
    Thu Dec 16 12:45:37 2010  [VERBOSE] nvstore.c 248: Failed to read 'apfInitParms.cfg' (size 356)
    Thu Dec 16 12:45:37 2010  [VERBOSE] apf_warp_utils.c 397: WARP KCID: f2:65:ac:2a:66:a6:7c:44
    Thu Dec 16 12:45:37 2010  [VERBOSE] apf_warp_utils.c 450: apfWarpInit: Enabling WARP...
    Thu Dec 16 12:45:37 2010  [VERBOSE] nvstore.c 255: Creating default configuration for 'mmInitParms.cfg'
    Thu Dec 16 12:45:37 2010  [VERBOSE] nvstore.c 248: Failed to read 'mmInitParms.cfg' (size 392)
    Thu Dec 16 12:45:37 2010  [VERBOSE] rfc3576.c 156: Running initRfc3576...
    Thu Dec 16 12:45:37 2010  [VERBOSE] file_db.c 697: Adding user '002255d4b8c2' to AAA db
    Thu Dec 16 12:45:37 2010  [VERBOSE] file_db.c 697: Adding user '0013e8b0ce9d' to AAA db
    Thu Dec 16 12:45:37 2010  [VERBOSE] file_db.c 697: Adding user '0013e8b0c963' to AAA db
    Thu Dec 16 12:45:37 2010  [VERBOSE] file_db.c 697: Adding user 'wendy' to AAA db
    Thu Dec 16 12:45:37 2010  [VERBOSE] file_db.c 697: Adding user '00219111cda0' to AAA db
    Thu Dec 16 12:45:37 2010  [VERBOSE] file_db.c 697: Adding user '0014a5dc2d15' to AAA db
    Thu Dec 16 12:45:37 2010  [VERBOSE] file_db.c 697: Adding user '0013e8b0e04b' to AAA db
    Thu Dec 16 12:45:37 2010  [VERBOSE] file_db.c 697: Adding user '00231434f34c' to AAA db
    Thu Dec 16 12:45:37 2010  [VERBOSE] file_db.c 697: Adding user '0024d277715b' to AAA db
    Thu Dec 16 12:45:37 2010  [VERBOSE] file_db.c 697: Adding user '0027100dad98' to AAA db
    Thu Dec 16 12:45:37 2010  [VERBOSE] file_db.c 697: Adding user '0014a5b5714e' to AAA db
    Thu Dec 16 12:45:37 2010  [VERBOSE] file_db.c 697: Adding user '0013e8b0e65d' to AAA db
    Thu Dec 16 12:45:37 2010  [VERBOSE] file_db.c 697: Adding user '0013020d6b3b' to AAA db
    Thu Dec 16 12:45:37 2010  [VERBOSE] file_db.c 697: Adding user '001f3b423ddd' to AAA db
    Thu Dec 16 12:45:37 2010  [VERBOSE] file_db.c 697: Adding user '0019d2382fb4' to AAA db
    Thu Dec 16 12:45:37 2010  [VERBOSE] file_db.c 697: Adding user '0018de6e821d' to AAA db
    Thu Dec 16 12:45:37 2010  [VERBOSE] file_db.c 697: Adding user '001f3b41ffe7' to AAA db
    Thu Dec 16 12:45:37 2010  [VERBOSE] file_db.c 697: Adding user '0013e8b0c991' to AAA db
    Thu Dec 16 12:45:37 2010  [VERBOSE] file_db.c 697: Adding user '001b771ba0ff' to AAA db
    Thu Dec 16 12:45:37 2010  [VERBOSE] file_db.c 697: Adding user '0012f03c4cf8' to AAA db
    Thu Dec 16 12:45:37 2010  [VERBOSE] file_db.c 697: Adding user '0013e8b0cbfb' to AAA db
    Thu Dec 16 12:45:37 2010  [VERBOSE] file_db.c 697: Adding user '001fe2a36d39' to AAA db
    Thu Dec 16 12:45:37 2010  [VERBOSE] file_db.c 697: Adding user 'ACSwirelessadmin' to AAA db
    Thu Dec 16 12:45:37 2010  [VERBOSE] file_db.c 697: Adding user 'Claireo' to AAA db
    Thu Dec 16 12:45:37 2010  [VERBOSE] file_db.c 697: Adding user 'Mattc' to AAA db
    Thu Dec 16 12:45:37 2010  [VERBOSE] file_db.c 697: Adding user 'Andye' to AAA db
    Thu Dec 16 12:45:37 2010  [VERBOSE] file_db.c 697: Adding user '0012f0a0031d' to AAA db
    Thu Dec 16 12:45:37 2010  [VERBOSE] file_db.c 697: Adding user 'administrator' to AAA db
    Thu Dec 16 12:45:37 2010  [VERBOSE] file_db.c 155: Creating AVL Tree with 512 entries
    Thu Dec 16 12:45:37 2010  [VERBOSE] nvstore.c 255: Creating default configuration for 'aaaapiInitParms.cfg'
    Thu Dec 16 12:45:37 2010  [VERBOSE] nvstore.c 248: Failed to read 'aaaapiInitParms.cfg' (size 356)
    Thu Dec 16 12:45:37 2010  [VERBOSE] nvstore.c 255: Creating default configuration for 'pemInitParms.cfg'
    Thu Dec 16 12:45:37 2010  [VERBOSE] nvstore.c 248: Failed to read 'pemInitParms.cfg' (size 356)
    Thu Dec 16 12:45:37 2010  [VERBOSE] ccx_rm_task.c 57: Created CCX RM Task (rc=154205248)
    Thu Dec 16 12:45:37 2010  [VERBOSE] nvstore.c 255: Creating default configuration for 'ccx_rm.cfg'
    Thu Dec 16 12:45:37 2010  [VERBOSE] nvstore.c 248: Failed to read 'ccx_rm.cfg' (size 448)
    Thu Dec 16 12:45:37 2010  [VERBOSE] nvstore.c 255: Creating default configuration for 'l2roam.cfg'
    Thu Dec 16 12:45:37 2010  [VERBOSE] nvstore.c 248: Failed to read 'l2roam.cfg' (size 924)
    Thu Dec 16 12:45:37 2010  [VERBOSE] nvstore.c 255: Creating default configuration for 'dot1xInitParms.cfg'
    Thu Dec 16 12:45:37 2010  [VERBOSE] nvstore.c 248: Failed to read 'dot1xInitParms.cfg' (size 356)
    Thu Dec 16 12:45:37 2010  Previous message occurred 6 times
    Thu Dec 16 12:45:34 2010  [ERROR] dtl_data.c 258: dtl_data.c 258: In dtlDataLowTask_rxBroffPkt call to 'dtlPduReceive' failed
    Thu Dec 16 12:45:33 2010  [VERBOSE] sshpmcert.c 9900: Added ID Cert 'cscoDefaultIdCert'
    Thu Dec 16 12:45:33 2010  [VERBOSE] sshpmcert.c 9900: Added ID Cert 'bsnDefaultIdCert'
    Thu Dec 16 12:45:33 2010  [VERBOSE] sshpmcert.c 9900: Added ID Cert 'bsnOldDefaultIdCert'
    Thu Dec 16 12:45:32 2010  [WARNING] sshpmcert.c 9236: Found Manufacturing-installed device certificates
    Thu Dec 16 12:45:30 2010  [VERBOSE] phy.c 140: link on port 0 change to up
    Thu Dec 16 12:45:29 2010  [VERBOSE] sshglue.c 688: No additional web auth redirect port configured
    Thu Dec 16 12:45:28 2010  [VERBOSE] nvstore.c 255: Creating default configuration for 'sshpmInitParms.cfg'
    Thu Dec 16 12:45:28 2010  [VERBOSE] nvstore.c 248: Failed to read 'sshpmInitParms.cfg' (size 368)
    Thu Dec 16 12:45:28 2010  [VERBOSE] nvstore.c 255: Creating default configuration for 'spam.cfg'
    Thu Dec 16 12:45:28 2010  [VERBOSE] nvstore.c 248: Failed to read 'spam.cfg' (size 348)
    Thu Dec 16 12:45:28 2010  [VERBOSE] nvstore.c 255: Creating default configuration for 'spamInitParms.cfg'
    Thu Dec 16 12:45:28 2010  [VERBOSE] nvstore.c 248: Failed to read 'spamInitParms.cfg' (size 100)
    Thu Dec 16 12:45:28 2010  Previous message occurred 2 times
    Thu Dec 16 12:45:28 2010  [WARNING] sim.c 247: Using invalid port 0 to index simInterfacePortTable
    Thu Dec 16 12:45:28 2010  [VERBOSE] sim.c 8415: simVlanPortNpuAdd: vlan=10, port=1, portBitMap=1
    Thu Dec 16 12:45:28 2010  [VERBOSE] sim.c 7856: simVlanPortUpdate: oldPort:0 newPort:1 oldVlan:10 newVlan:10 vlanName:acs-guset
    Thu Dec 16 12:45:28 2010  [VERBOSE] sim.c 3733: simInterfacePortSet -- interface 'acs-guset' priPort = 1
    Thu Dec 16 12:45:28 2010  [VERBOSE] sim.c 5531: simCreateInterface: interfaceName:acs-guset, vlanId:10
    Thu Dec 16 12:45:28 2010  Previous message occurred 2 times
    Thu Dec 16 12:45:28 2010  [WARNING] sim.c 247: Using invalid port 0 to index simInterfacePortTable
    Thu Dec 16 12:45:28 2010  [VERBOSE] sim.c 8415: simVlanPortNpuAdd: vlan=2, port=1, portBitMap=1
    Thu Dec 16 12:45:28 2010  [VERBOSE] sim.c 7856: simVlanPortUpdate: oldPort:0 newPort:1 oldVlan:2 newVlan:2 vlanName:voip
    Thu Dec 16 12:45:28 2010  [VERBOSE] sim.c 3733: simInterfacePortSet -- interface 'voip' priPort = 1
    Thu Dec 16 12:45:28 2010  [VERBOSE] sim.c 5531: simCreateInterface: interfaceName:voip, vlanId:2
    Thu Dec 16 12:45:28 2010  [VERBOSE] sim.c 8415: simVlanPortNpuAdd: vlan=0, port=1, portBitMap=1
    Thu Dec 16 12:45:28 2010  [VERBOSE] sim.c 7856: simVlanPortUpdate: oldPort:0 newPort:1 oldVlan:0 newVlan:0 vlanName:ap-manager
    Thu Dec 16 12:45:28 2010  [VERBOSE] sim.c 3733: simInterfacePortSet -- interface 'ap-manager' priPort = 1
    Thu Dec 16 12:45:28 2010  [VERBOSE] sim.c 5531: simCreateInterface: interfaceName:ap-manager, vlanId:0
    Thu Dec 16 12:45:28 2010  [VERBOSE] sim.c 3733: simInterfacePortSet -- interface 'virtual' priPort = 0
    Thu Dec 16 12:45:28 2010  [VERBOSE] sim.c 5531: simCreateInterface: interfaceName:virtual, vlanId:-1
    Thu Dec 16 12:45:28 2010  [VERBOSE] sim.c 3733: simInterfacePortSet -- interface 'service-port' priPort = 0
    Thu Dec 16 12:45:28 2010  [VERBOSE] sim.c 5531: simCreateInterface: interfaceName:service-port, vlanId:-1
    Thu Dec 16 12:45:28 2010  [VERBOSE] sim.c 8415: simVlanPortNpuAdd: vlan=0, port=1, portBitMap=1
    Thu Dec 16 12:45:28 2010  [VERBOSE] sim.c 7856: simVlanPortUpdate: oldPort:0 newPort:1 oldVlan:0 newVlan:0 vlanName:management
    Thu Dec 16 12:45:28 2010  [VERBOSE] sim.c 3733: simInterfacePortSet -- interface 'management' priPort = 1
    Thu Dec 16 12:45:28 2010  [VERBOSE] sim.c 5531: simCreateInterface: interfaceName:management, vlanId:0
    Thu Dec 16 12:45:28 2010  [VERBOSE] nvstore.c 255: Creating default configuration for 'simInitParms.cfg'
    Thu Dec 16 12:45:28 2010  [VERBOSE] nvstore.c 248: Failed to read 'simInitParms.cfg' (size 356)
    Thu Dec 16 12:45:28 2010  [VERBOSE] nvstore.c 255: Creating default configuration for 'filterCfgData.cfg'
    Thu Dec 16 12:45:28 2010  [VERBOSE] nvstore.c 248: Failed to read 'filterCfgData.cfg' (size 15544)
    Thu Dec 16 12:45:28 2010  [VERBOSE] nvstore.c 255: Creating default configuration for 'fipsPrerequisite.cfg'
    Thu Dec 16 12:45:28 2010  [VERBOSE] nvstore.c 248: Failed to read 'fipsPrerequisite.cfg' (size 256)
    Thu Dec 16 12:45:28 2010  [VERBOSE] gvr.c 112: GVRP: Create GVR.
    Thu Dec 16 12:45:28 2010  [VERBOSE] nvstore.c 255: Creating default configuration for 'garp.cfg'
    Thu Dec 16 12:45:28 2010  [VERBOSE] nvstore.c 248: Failed to read 'garp.cfg' (size 664)
    Thu Dec 16 12:45:28 2010  [VERBOSE] nvstore.c 255: Creating default configuration for 'dot1dCfgData.cfg'
    Thu Dec 16 12:45:28 2010  [VERBOSE] nvstore.c 248: Failed to read 'dot1dCfgData.cfg' (size 804)
    Thu Dec 16 12:45:28 2010  [VERBOSE] nvstore.c 255: Creating default configuration for 'dot1dInitParms.cfg'
    Thu Dec 16 12:45:28 2010  [VERBOSE] nvstore.c 248: Failed to read 'dot1dInitParms.cfg' (size 380)
    Thu Dec 16 12:45:28 2010  [VERBOSE] nvstore.c 255: Creating default configuration for 'fdb.cfg'
    Thu Dec 16 12:45:28 2010  [VERBOSE] nvstore.c 248: Failed to read 'fdb.cfg' (size 49496)
    Thu Dec 16 12:45:28 2010  [VERBOSE] nvstore.c 255: Creating default configuration for 'fdbInitParms.cfg'
    Thu Dec 16 12:45:28 2010  [VERBOSE] nvstore.c 248: Failed to read 'fdbInitParms.cfg' (size 356)
    Thu Dec 16 12:45:28 2010  [VERBOSE] nvstore.c 255: Creating default configuration for 'snmpCfgData.cfg'
    Thu Dec 16 12:45:28 2010  [VERBOSE] nvstore.c 248: Failed to read 'snmpCfgData.cfg' (size 1752)
    Thu Dec 16 12:45:28 2010  [VERBOSE] nvstore.c 255: Creating default configuration for 'snmpInitParms.cfg'
    Thu Dec 16 12:45:28 2010  [VERBOSE] nvstore.c 248: Failed to read 'snmpInitParms.cfg' (size 368)
    Thu Dec 16 12:45:28 2010  Previous message occurred 2 times
    Thu Dec 16 12:45:28 2010  [ERROR] sim_util.c 1581: Unable to set uranium QOS Profile ACM
    Thu Dec 16 12:45:28 2010  [ERROR] sim_util.c 1588: Unable to set platinum QOS Profile ACM
    Thu Dec 16 12:45:28 2010  [ERROR] sim_util.c 1581: Unable to set platinum QOS Profile ACM
    Thu Dec 16 12:45:28 2010  Previous message occurred 2 times
    Thu Dec 16 12:45:28 2010  [ERROR] sim_util.c 1581: Unable to set gold QOS Profile ACM
    Thu Dec 16 12:45:28 2010  [ERROR] sim_util.c 1588: Unable to set bronze QOS Profile ACM
    Thu Dec 16 12:45:28 2010  [ERROR] sim_util.c 1581: Unable to set bronze QOS Profile ACM
    Thu Dec 16 12:45:28 2010  Previous message occurred 2 times
    Thu Dec 16 12:45:28 2010  [ERROR] sim_util.c 1581: Unable to set silver QOS Profile ACM
    Thu Dec 16 12:45:28 2010  [VERBOSE] nvstore.c 255: Creating default configuration for 'simRouteCfgData.cfg'
    Thu Dec 16 12:45:28 2010  [VERBOSE] nvstore.c 248: Failed to read 'simRouteCfgData.cfg' (size 1148)
    Thu Dec 16 12:45:28 2010  [VERBOSE] nvstore.c 255: Creating default configuration for 'simInitParms.cfg'
    Thu Dec 16 12:45:28 2010  [VERBOSE] nvstore.c 248: Failed to read 'simInitParms.cfg' (size 356)
    Thu Dec 16 12:45:28 2010  [CRITICAL] timerlib.c 442: Task 154182432 unable to acquire timer lock.
    Thu Dec 16 12:45:28 2010  [CRITICAL] osapi_sem.c 777: osapiBsnTimerCreate() @ timerlib.c:442: ERROR: 'timerSema' is a NULL pointer.
    Thu Dec 16 12:45:27 2010  [CRITICAL] timerlib.c 442: Task 154182432 unable to acquire timer lock.
    Thu Dec 16 12:45:27 2010  [CRITICAL] osapi_sem.c 777: osapiBsnTimerCreate() @ timerlib.c:442: ERROR: 'timerSema' is a NULL pointer.
    Thu Dec 16 12:45:27 2010  [VERBOSE] nvstore.c 255: Creating default configuration for 'dtlCfgData.cfg'
    Thu Dec 16 12:45:27 2010  [VERBOSE] nvstore.c 248: Failed to read 'dtlCfgData.cfg' (size 344)
    Thu Dec 16 12:45:27 2010  [VERBOSE] nvstore.c 255: Creating default configuration for 'dtlInitParms.cfg'
    Thu Dec 16 12:45:27 2010  [VERBOSE] nvstore.c 248: Failed to read 'dtlInitParms.cfg' (size 356)
    Thu Dec 16 12:45:26 2010  [CRITICAL] bootos.c 836: Starting code...
    *           End Cisco Crash Handler                    *

  • Wvdial doesn't quit

    After I use wvdial to establish a ppp link and press "CTRL+C" to make it hang up the connection, the connection reamains active.
    Event doing
    sudo ifconfig ppp0 down
    doesn't work.
    Sometimes even if I take out the modem and reinsert it the connection remains active and to my suprise even works.
    [theta@boolean-pc ~]$ sudo wvdial
    Password:
    --> WvDial: Internet dialer version 1.61
    --> Cannot get information for serial port.
    --> Initializing modem.
    --> Sending: ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0
    ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0
    OK
    --> Modem initialized.
    --> Sending: ATDT*99#
    --> Waiting for carrier.
    ATDT*99#
    CONNECT 3600000
    --> Carrier detected. Starting PPP immediately.
    --> Starting pppd at Thu Sep 2 10:33:20 2010
    --> Pid of pppd: 10612
    --> Using interface ppp0
    --> Authentication (PAP) started
    --> Authentication (PAP) successful
    --> local IP address 10.18.147.141
    --> remote IP address 10.64.64.64
    --> primary DNS address 218.248.240.135
    --> secondary DNS address 4.2.2.2
    --> Script /etc/ppp/ip-up run successful
    --> Default route Ok.
    --> Connected... Press Ctrl-C to disconnect
    ^CCaught signal 2: Attempting to exit gracefully...
    [theta@boolean-pc ~]$
    Last edited by theta (2010-09-02 05:10:17)

    i think this has to do with the modem being initialized, it needs to be forcefully disconnected by sending an AT command, i dont know what command is used exactly, but you can google it with your modem model to get the commands.

  • OCS RCC with CUPS

    Hi All,
    We are testing the RCC features of OCS with the integration of OCS,CUPS,CCM.
    From the MOC user's are able to dial the extnsions from the contact list.
    the problem we are facing here is even the calls are answered  which is initiated via MOC .but in the MOC status showing like :calling only".
    When i checking the CUPS real time trace, there is no info message in send to OCS to from the CUPS.we couldn't some more info from the cti trace also.
    Thanks,

    Here's the INFO message CUPS sent to OCS for the "EstablishedEvent":
    06/30/2010 11:31:56.507 ESP|[Wed Jun 30 11:31:56 2010] PID(14105) mod_sip_ua.c(879) send_scb_message():
    INFO sip:[email protected];opaque=user:epid:Wv_rgHGJ41ymlLX42FlPVAAA;gruu SIP/2.0
    Via: SIP/2.0/UDP 10.45.118.246:5048;branch=z9hG4bK-99e9f3ec
    From: [email protected]>;tag=1881b32d-2539dd11
    To: "manu m"[email protected]>;tag=da2ecf095d;epid=3f876087f7
    Call-ID: 7fa19c806aec4a4eb904768ef134d1e9
    Max-Forwards: 70
    User-Agent: Cisco-Systems-UA\6.0
    CSeq: 119 INFO
    Content-Type: application/csta+xml
    Content-Disposition: signal;handling=required
    Route: ocs.dclab.com:49655;transport=tcp;opaque=state:T;lr>;tag=865917D8AC88FED85BE784830C9B3297
    Contact:
    Content-Length: 1129
    <?xml version="1.0"?>
    <EstablishedEvent xmlns="http://www.ecma-international.org/standards/ecma-323/csta/ed3">
    Didn't OCS receive this?
    Thanks!
    Michael

  • Wvdial: unable to connect to GPRS ("The PPP daemon has died")

    Hello,
    I'm unable to setup the Internet connection... Looks like the problem is in pppd, can you help please?
    pppd displays some weird symbols (these symbols are different every time I reconnect) and then dies in 30 seconds:
    [user@myhost ~]$ sudo wvdial
    --> WvDial: Internet dialer version 1.61
    --> Cannot get information for serial port.
    --> Initializing modem.
    --> Sending: ATZ
    ATZ
    OK
    --> Sending: ATQ0 S0=0
    ATQ0 S0=0
    OK
    --> Sending: AT+CGATT=1
    AT+CGATT=1
    OK
    --> Sending: AT+CGDCONT=1,"IP","internet.mts.ru"
    AT+CGDCONT=1,"IP","internet.mts.ru"
    OK
    --> Modem initialized.
    --> Sending: ATDT*99***1#
    --> Waiting for carrier.
    ATDT*99***1#
    CONNECT
    --> Carrier detected. Starting PPP immediately.
    --> Starting pppd at Wed Sep 15 09:59:19 2010
    --> Pid of pppd: 6353
    --> Using interface ppp0
    --> pppd: ([01] h[01] @[01] H[01] [01]
    --> pppd: ([01] h[01] @[01] H[01] [01]
    --> pppd: ([01] h[01] @[01] H[01] [01]
    --> pppd: ([01] h[01] @[01] H[01] [01]
    --> pppd: ([01] h[01] @[01] H[01] [01]
    --> Disconnecting at Wed Sep 15 09:59:50 2010
    --> The PPP daemon has died: A modem hung up the phone (exit code = 16)
    --> man pppd explains pppd error codes in more detail.
    --> Try again and look into /var/log/messages and the wvdial and pppd man pages for more information.
    --> Auto Reconnect will be attempted in 5 seconds
    --> Cannot open /dev/rfcomm0: Input/output error
    --> Cannot open /dev/rfcomm0: Connection reset by peer
    --> Cannot get information for serial port.
    --> Initializing modem.
    --> Sending: ATZ
    ^CCaught signal 2: Attempting to exit gracefully...
    [user@myhost ~]$
    pppd error code 16 is:
    16     The link was terminated by the modem hanging up.
    Looks like pppd have to perform something during 30 seconds after start but it doesn't perform it.
    P.S. /var/log/messages:
    Sep 15 09:59:19 localhost pppd[6353]: pppd 2.4.5 started by root, uid 0
    Sep 15 09:59:19 localhost pppd[6353]: Using interface ppp0
    Sep 15 09:59:19 localhost pppd[6353]: Connect: ppp0 <--> /dev/rfcomm0
    Sep 15 09:59:49 localhost pppd[6353]: LCP: timeout sending Config-Requests
    Sep 15 09:59:49 localhost pppd[6353]: Connection terminated.
    Sep 15 09:59:49 localhost pppd[6353]: Modem hangup
    Sep 15 09:59:49 localhost pppd[6353]: Exit.

    codycarey wrote:
    It looks like pppd is fine, but it's trying to use a device that doesn't exist.
    --> Cannot open /dev/rfcomm0: Input/output error
    --> Cannot open /dev/rfcomm0: Connection reset by peer
    --> Cannot get information for serial port.
    These errors occur on _redial_ attempt.
    (I have to execute "/etc/rc.d/bluetooth restart" after every wvdial attempt but I think it's OK).
    codycarey wrote:What is the GPRS device you're using?
    Samsung SGH-D830 (via Bluetooth).

  • Please help Upconvert 5.1 to 2010

    Hi,
    Is anyone could upconvert those VI from LV 5.1 to LV 2010? The LabView 2010 program even can not open it. It says: the file is too old to convert to LV 2010........
    LV 5.1 to LV 2010.
    Thanks a lot.
    Solved!
    Go to Solution.
    Attachments:
    Scanw_Scope.vi ‏150 KB
    Scanw_ADCmodified.vi ‏111 KB

    yeah....you are right. I forgot all those subVIs.
    I attached them as following.  Could you please help me to convert them to 8.2? So that I can open them with LV2010.
    Thank you so much!
    Attachments:
    ks3988.llb ‏723 KB
    LC9420.LLB ‏665 KB
    LaserStep.vi ‏55 KB

  • Upconvert 5.1 to 2010 request

    Hello,
    Could someone please upconvert these VI from version 5.1 to version 2010:
    Thank you in advance
    Solved!
    Go to Solution.
    Attachments:
    Iemgx2.vi ‏89 KB
    Tor&iemg_mod.vi ‏199 KB
    Pspecx2.vi ‏70 KB

    attached are in 8.2, which you can open.
    SubVIs missing, so I'm assuming you already have them.
    Attachments:
    Iemgx2.vi ‏24 KB
    Pspecx2.vi ‏21 KB
    Tor&iemg_mod.vi ‏48 KB

  • Upconvert from LV 5.1 to LV 2010

    Hi,
    Is anyone could upconvert this driver? It would be appreciated.
    LV 5.1 to LV 2010.
    Thanks you.
    Solved!
    Go to Solution.
    Attachments:
    Uvikon_942.llb ‏500 KB

    attached as 8.2, which you can open
    WARNING: The upconvert generated some insane object warnings, likely related to the graph. You may need to recreate the graph from scratch.
    Attachments:
    Uvikon_942.llb ‏292 KB

  • Upconvert from LV 4.1 to LV 2010

    Hi,
    Could some help me convert these VIs from from LabVIEW 4.1 to LabView 2010? Thanks a lot!
    Best,
    Hai-Yin
    Solved!
    Go to Solution.
    Attachments:
    Tricpu4.llb ‏587 KB

    One of the subVIs in the library ("Read Status") was actually LabVIEW 3 and could not be upconverted since that requires a special toolkit from NI.
    Attachments:
    Tricpu4.llb ‏324 KB

Maybe you are looking for