UPD Driver update from LV5 to LV2012

Rhode & Shwarz UPD is a really old workhorse. Their drivers are in LV5, but will not load in LV2012. I think they need to be upgraded via LV8 first. Can anyone help?
Solved!
Go to Solution.
Attachments:
rsupd_lv5_2_0.zip ‏2463 KB

That is what the Version Conversion Board is for. But here is your code mass compiled in 8.2.1, which you can open with anything newer.
There are only two ways to tell somebody thanks: Kudos and Marked Solutions
Unofficial Forum Rules and Guidelines
Attachments:
rsupd.zip ‏1938 KB

Similar Messages

Can't print since last epson driver update from Software Update

I have a Epson Workforce 600 connected wirelessly which was working just fine until I installed the driver update yesterday which was provided via Software Update. Now, I can print a test page via the Epson Software and my computer can see the printer but when I hit the "print" button on print dialogs, nothing happens. It's very strange, it seems as if the click isn't even recognized.
I've tried printing from multiple programs and it's all the same. Only printing a test page from the Epson software works at this point. Any suggestions?

The probable cause of this is that the /Library/Caches/Epson folder is missing.
There are several threads here about this issue with Epson printers: try deleting the <hard drive>/Library/Printers/EPSON folder and then reinstalling the software through Software Update or from the Apple download site. After installing the software, restart, delete and re-add the printer. That should recreate the /Library/Caches/Epson folder, and you should be able to print.
hope this helps.

Is it safe to download adobe flash drive update from the internet (came via a notice from Adobe)

Is it safe to download an update from Adobe Flash Drive via the internet? A message from Adobe has popped up on a number of videos I'm trying to access.

If you are sure it is from Adobe, yes.
If you have the least little bit of doubt then go to the Adobe site yourself and download from their site and then install it.

Driver updates from vendors or Apple?

Hello! quick question... I am running bootcamp 4, and Win7 is alerting me there is a newer driver available for the video card on my MBPr. Is it reccomended to only use the "Windows Support" download file from apple when updating windows drivers? Or can a user safely utilize a vendor-direct driver update?
Thanks
Craig

The graphic card driver that Boot Camp includes is very old, and it's recommended to use the driver that the vendor provides, in your case, from NVIDIA. You can get the most recent NVIDIA driver from the NVIDIA website > http://www.nvidia.com This is important in order to get the maximum performance of your graphic card

LAN driver update from MS.

Dear ALL,
I just do this update from MS.
nVidia - Network - NVIDIA nForce Networking Controller
上次发布日期: 2010/11/10
下载大小: 514 KB
nVidia Network software update released in August, 2010
系统要求
推荐的 CPU: 未指定。
推荐的内存: 未指定。
推荐的硬盘空间: 未指定。
获得帮助和支持
http://support.microsoft.com/select/?target=hub
详细信息
http://winqual.microsoft.com/support/?driverid=20378903
After update ... my LAN driver was crashed. Any idea what happen with this driver !?
Ciao,
Edwin

Rollback or uninstall.
Download Boot Camp 3.2 and see if that helps.
http://www.apple.com/support/bootcamp/

WELL, WHAT DO WE DO NOW ??? you answered me !! The problem is across all actions on the display on screen . No matter what I do. I tried getting driver updates from INTeL but even if I tell them it is a Mac the system sends me Drivers for Windows..

well I'm sure this MacBook Pro 13' (right outa the box) needs driver updates. Is it a retina version ?? I don't know..?? but before I take it back. I want to try everything.

MacOS X should already include the correct drivers as part of the OS. Figure it out: they built the MacBook Pro and they built the operating system... they knew what they would be working with.
Mavericks is brand new and may have the odd fault, but if you're having basic display problems with a new machine it's probably hardware. Take your machine to a Mac Store. This is why they have warranties.
ps: using very large and/or bold characters is equated with shouting and is considered rude. plain old font works best.
p.s.s.: You posted in the Mac Pro forum (for the big workstation systems) not the MacBook Pro forum (for laptops.)

Help! how to apply Seagate hard-drive update from DVD drive on G4 Powermac

Short version of story:
Just put Sonnet PCI SATA card in G4 Digital Audio Powermac running Tiger. Have replaced two IDE drives with *Seagate Barracuda 7200.11 1 TB hard drive*. It's recognized and working fine. EXCEPT: this is the now infamous drive ST31000340AS that WILL most certainly fail if it does not get the firmware update that Seagate has made available. (These drives are failing like crazy-- Google for info, do not buy!) I have the firmware update on CD as an ISO file (of course Seagate makes nothing that it Mac friendly but this has worked for other Mac users). But when I try to flash the firmware by starting from the CD ("C" key held down), nothing happens. The G4 just goes ahead and starts Tiger 10.4.11. I have also tried holding down "O + F + option + control on start up. I'm not getting anywhere.
Since the drive is functional and it's the only drive in the G4, what am I doing wrong? Help!

I just got off the phone with Seagate who say that while my model numbers are the affected drives, my two drives have serial numbers that do NOT need a firmware update. (Yet!)
However, I'm not feeling very lucky. I took these two drives from my Maxtor One Touch III 2 TB external hard-drive because it was failing intermittently-- "now you see me, now you don't." Not very good for a backup drive! But Maxtor/Seagate is providing nothing for Maxtor One Touch III owners under warranty but another refurbished (as in previously failed) Maxtor One Touch III and asking hundreds of dollar$ for data recovery. There is not even a firmware update at this point. People should be avoiding Seagate Barracuda drives (these used to be the best of the best, but not now) or at least researching them *very thoroughly* before buying.
I guess, the good news is that I don't have to struggle with getting a firmware update to work on my PowerMac. Though thanks to you both I will know what to do if these drives eventually do need a firmware update. The other good news is that I got all my data back by pulling the drives from their enclosure which apparently causes overheating. I violated my warranty, pulled the drives, and got all my data back.
At the moment both of my Barracuda drives are happily purring away in my PowerMac G4 giving that old baby 2 Tb to play with. (I use iPartition so getting the drives recognized on the G4 isn't a problem.) And since I have my new iMac 3.06ghz 24" with all my data backup on WD external drives, I will only use the G4 networked for extra storage (backup for my backup). (I am also using Disk Warrior and Data Rescue II to keep an eye on these drives.)
Thanks again for the advice.

Install optional driver updates from Windows Update for IdeaPad Yoga 13?

Windows Update on IdeaPad Yoga 13 - Windows 8.1 (64-bit) suggests two optional updates:
Conexant - Audio Device - Conexant SmartAudio HD
10.01.2014
Intel Corporation - Graphics Adapter WDDM1.1, Graphics Adapter WDDM1.2, Graphics Adapter WDDM1.3 - Intel(R) HD Graphics 4000
Intel Corporation Graphics Adapter WDDM1.1, Graphics Adapter WDDM1.2, Graphics Adapter WDDM1.3 software update released in May, 2014
04.06.2014
Should I install those updates or should I keep the original drivers?
The original drivers from Lenovo "Drivers and software" section (http://support.lenovo.com/de_DE/downloads/detail.page?DocID=DS032590) seem to be older/outdated:
Conexant Audio Driver for 64-bit Windows
8.65.3.53 10/22/2013
Integrated Graphics Driver for 64-bit Windows
Windows 8.1 (64-bit)
9.17.10.2843 10/23/2012
Intel Video Driver for 64-bit Windows
10.18.10.3282 10/22/2013

Windows Update has now another update for "Intel Corporation Graphics Adapter WDDM1.1" and still no updates on the Lenovo site.
So I tried the the drivers from Windows Update and it seems that every thing is still working fine.

Is anyone having problems with the new Xerox printer driver update from Apple? My 8700S is no longer working with QuarkXPress.

I allowed a System Update that included a Xerox Printer update. I am running a MacPro 10.6.8 with Quark 8.5.1 and a Xerox ColorQube 8700S. EVERY was working perfectly before the "update" but afterwards anything sent to the printer from Quark would stall the printer. I went to the Xerox website and downloaded their Printer Driver and tried again. Now I could print from Quark but I can NOT get to the printer window to change the type of paper, etc. So, the problem still persists.
Should I try going into Time Machine and trying to find the Xerox Print Driver in the Library folder?
Should I upgrade the whole system software? (I wouldn't mind doing that AFTER I get this magazine off to the commerical printer)
Should I upgrade to Quark 9?
Any help here would be apprciated.
Thanks - Rob

As a general rule of thumb, I never install updates until I read its info and I am having problems with my current software. I hide the updates until I need them. Usually this happens when I update or upgrade my os. I don't fix what ain't broken is my golden rule.
It is possible that you need to update or upgrade Quark in order for your newer printer driver to work. First I would try the following....
Disconnect all peripherals from your computer.
Boot from your install disc & run Repair Disk from the utility menu. To use the Install Mac OS X disc, insert the disc, and restart your computer while holding down the C key as it starts up.
Select your language.
Once on the desktop, select Utility in the menu bar.
Select Disk Utility.
Select the disk or volume in the list of disks and volumes, and then click First Aid.
Click Repair Disk.
Restart your computer when done.
Repair permissions after you reach the desktop-http://support.apple.com/kb/HT2963 and restart your computer.
If your printer does not work afterwards, update or upgrade Quark. If that does not work, contact the printer manufacturer.

GPU driver update from AMD website? (G570)

Got a G570 with HD 6370M & Intel HD Graphics 3000 (switchable graphics).
I'm having some bad graphics performance since the driver offered by Lenovo is outdated, and I want to update my AMD drivers. Can I download the latest one from this website without crashing anything and having to reinstall my OS afterwards?
Or maybe could I use this tutorial for my laptop as well?
Please help me, thank you.

As a general rule of thumb, I never install updates until I read its info and I am having problems with my current software. I hide the updates until I need them. Usually this happens when I update or upgrade my os. I don't fix what ain't broken is my golden rule.
It is possible that you need to update or upgrade Quark in order for your newer printer driver to work. First I would try the following....
Disconnect all peripherals from your computer.
Boot from your install disc & run Repair Disk from the utility menu. To use the Install Mac OS X disc, insert the disc, and restart your computer while holding down the C key as it starts up.
Select your language.
Once on the desktop, select Utility in the menu bar.
Select Disk Utility.
Select the disk or volume in the list of disks and volumes, and then click First Aid.
Click Repair Disk.
Restart your computer when done.
Repair permissions after you reach the desktop-http://support.apple.com/kb/HT2963 and restart your computer.
If your printer does not work afterwards, update or upgrade Quark. If that does not work, contact the printer manufacturer.

Safe to downaload Realtek driver updates from Realtek or should I stick to HP updates only?

So I have an HP-083uk - specs are here:- http://h10025.www1.hp.com/ewfrf/wc/document?docname=c01946060&lc=en&dlc=en&cc=uk&site=null&lang=en&p...
HP seem to have stopped updating the audio drivers for this a while ago, while I see Realtek keep updating drivers regularly.
Is it safe to install Realtek drivers or should I stick to HP drivers or should I look to MSI (my mobo manufacturer) for audio drivers?

Hi:
You should be fine using the Realtek drivers from their site. I use them all the time, and recommend to others to use them when they have issues--especially pertaining to audio issues post upgrading to Windows 7.
This is the driver page you need to get the drivers for your PC from Realtek. Accept the agreement, download and install the driver for your OS.
http://www.realtek.com.tw/downloads/downloadsView.aspx?Langid=1&PNid=24&PFid=24&Level=4&Conn=3&DownT...
Paul

Satellite P200-1B6: Sound Driver update fails and HD-DVD Player doesn't work

I have just bought a Satellite P200-1B6 laptop and spent the day installing the updates recommended by the TEMPO program. One of these was a Sound Driver update from RealTek but on running this it fails about 80% of the way through with an error: 'Install Realtek HD Audio Driver Failure !!'.
Now the Toshiba HD DVD player fails to start with an error 'Unable to output the video to an external device.
Please switch your display device by pressing the Fn + F5 keys after ending the application'. I've tried this but it seems to have no effect.
I'm now regretting starting to update the installed drivers. Should I try to rebuild the machine using the recovery discs or is there another solution that someone has found? Or have others found the upgrade works?
Any advice welcome

Last month I upgraded my PC Satellite P200 (BIOS, Driver ATI HD2600, Package VAP and HD-DVD Player).
But after this update, I was no longer be able to read my HD-DVDs
Error message was: "Unable to send the video to an external device. Please turn off the display device."
The problem was much of the update Realtek R1.76 (Realtek Sound Driver - 6.0.1.547 - 20/11/07) currently proposed on the site toshiba.
Indeed, the P200-1DE is equipped with Realtek ALC268 Audio Codec.
The latest update of this codec is R1.89. I downloaded from the site Realtek and it has allowed me to solve the problem.
[http://www.realtek.com.tw/downloads/downloadsView.aspx?Langid=1&PNid=14&PFid=24&Level= 4&Conn=3&DownTypeID=3&GetDown=false]
I have no problem since that last update

What can I do about driver updates that will not install because of an "unknown error".

I have an HP p6530 Pavilion that is taking a while to startup. Not real long but longer then it should. I tried to install driver updates from Intel for the Chipset and RAID but when I download and install it will not finish the install because of an "unknown error" and then setup exits. I could really use advice from anyone that can help.

Have you tried to disable your virus protection and any running programs in the system tray? Turn off any programs that are not necessary before you run the updates. Make sure you run the updates as administrator (right click on the driver install program and click on run as administrator).
Reminder: Please select the "Accept as Solution" button on the post that best answers your question. Also, you may click on the white star in the "Kudos" button for any helpful post to give that person a quick thanks. These feedback tools help keep our community active, so you receive better answers faster.

Jan 2014 Imaging driver update issues

I upgraded my ZCM Primary server from 11.2.2 to 11.2.4 over the weekend. Today I downloaded the Jan 2014 Imaging Driver update from the 11.2.4 patches page. I downloaded the zenworks11.2.4_MU1_Jan14 that said it was for 11.2.4 and 11.2.4 MU1. I followed the readme.txt file that says to run the imaging_driver_update.bat file. I ran this and I get:
"Applying wrong imagin driver updates........Exiting driver update."
Does anyone have any solutions to get this fixed up? If I go to %zenworks_home%\share\preboot\update and look at the ZUpdate.sig file it shows 112303 for the [zen_client_version] If I go into the ZCC management page and look under the primary server all of the version show correct as being 11.2.4.
Thanks for any information you can give. I also cannot PXE boot at this time as well. It gets through PXE fine and I choose "Start Zenworks Imaging Maintenance" from the Imaging menu screen and then it starts loading but then pops up "cannot connect to Zenworks repository" or something like that. I don't have it right in front of me now.
Thanks for any help.
Andrew
Network Administrator
West York Area School District

Marceldejager,
> Anyone any idea's?
yes - read the screen when you go to the November Update you are redirected to the Monthly Update, sure - but at the top, with a bright yellow background are the words
"You have been automatically redirected to this patch because it supercedes the patch you originally requested. The patch you originally requested is still downloadable, click here to download it instead of this newer patch."
if you click on the link it takes you to the patch you want...
Shaun Pond (now working for ENGL)
newly reminted as a Knowledge Professional

Printer Driver Updates, How Often? (Canon MP560 is 3 months behind)

I have a new iMac 27" with Snow Leopard and a new Canon MP560 printer hooked up via Wifi.
I didn't use the Canon install disk because it didn't have Snow Leopard compatible drivers on it...instead I went to print & Fax and did an "add printer" (it detected just the MP560 scanner). Then I did an apple "software update" which grabbed the new Canon driver package, after that the printer showed up and all was well.
HOWEVER, I noticed that the driver from apple is version 10.26.0 while Canon's latest is 10.26.1 (as of October 2). I don't mind downloading drivers from Canon and installing them but I'm wondering about a few things.
1. How long does it usually take for manufacturers drivers to get to Apple's update server? 3 months seems like a long time.
2. If I manually install drivers from Canon now, will future driver updates from Apple's server still be detected and install properly?
3. In "print & fax" under "options and supplies" I can see the driver version for the printer. However there doesn't seem to be any way to see the version for the scanner driver. According to the Canon site the scanner driver has a different version than the printer driver. How can I see the version number for the scanner driver to check if it's up to date?
I'm mainly interested in an answer to #3 above. Canon has a CUPS printer driver, a scanner driver, an ICA driver and an "MP driver" all for OSX 10.6 I'd like to know how to find out which ones are already installed before I install new ones.
System profiler only seems to show the CUPS driver version.
Thanks!

Printer manufacturers must deliver drivers to Apple if they are to be included with an OS X distribution. As for Canon's version branding you would need to ask them since Apple does not produce printer drivers except for Apple-made printers, and Apple doesn't make printers anymore.
If newer drivers become available for an installed printer then Software Update will download them only if they are available through an Apple update.
Since scanner drivers are not the same as printer drivers and a manufacturer may have more updates for one than the other, don't expect to find version numbers to be the same.
Scanner modules may be in many different locations. Download Easy Find - VersionTracker or MacUpdate - and use it to locate the scanner software files for your model.

UPD Driver update from LV5 to LV2012

Similar Messages

Maybe you are looking for