Update ABAP Report in SAP R/3 with data from xMII

Hi Experts,
How do we update some PP reports in SAP R/3 from xMII .
We have sucessfully got all the data from the historians in the plant and also established connection between SAP R/3 and xMII.
1. We also need to store the data passed in SAP R/3 in a Z-table and fetch data from there.
2. How the BLS in xMII can be called from SAP R/3 to update the table.
Thanks in advance.
Regards,
[Vivek K|https://forums.sdn.sap.com/profile.jspa?userID=2097685]

Vivek,
You can very well do this using a remote enabled function module. For this,
1) Write a function module which takes input (tag name & value) and inserts in z table.
2) Set it remote enabled.
3) Define your SAP server under data services - > SAP Server Configurations.
3) Write a BLS transaction which calls this RFC using SAP JCO action. Here you can use the configuration that you defined in earlier step. Set the input parameters.
4) Execute the transaction and you can put an external breakpoint in your RFC for debugging.
I think when you said you are getting data xacute query, even that will execute such kind of BLS transaction.
Mike.

Similar Messages

ABAP Reports and SAP Query

Hi Experts,
I have question regarding ABAP Reports, SAP Query, and Transaction with variant. How are we securing one the above reports that we assign them through pfcg. We can secure custom program by custom transaction or define the auth group in S_PROGRAM auth object but in this case we have to assign SA38 in production. is that correct?
Please help me understand difference between the ABAP reports and SAP query. Is the ABAP reports same as Program or they are different.
Thanks in advance
Faisal
Edited by: Faisal on Jun 30, 2009 11:06 PM

Hi,
1) End user security (role matrix coordinate with process team)
This role Matrix design is most important where we can put restrictions and use SoD.
2) Secure Table (by auth group)
Table TDDAT and use of transaction se54 for security tables to right auth Groups. Secure s_tabu_dis, s_tabu_cli.
3) Secure program (as you said ABAP reports are referred to Program)
Use of table TPGP and program RSCSAUTH for assignment of groups to Program. SA38 Running of SA38 requires a minimum SUBMIT in user Action. A user having SA38 is dangerous as he/she is now enabled to run any report. Hence protection in Auth Group is needed. Verify each and every program is having authority check statement and Auth Group or not before assigning sa38. As you mentioned its best to avoid SA38 and create CUSTOM TXN for each report.
(We should also SECURE S_DEVELOP in Production properly along with ur points. Please Note).
4) Secure some batch jobs roles for batch job
Secure by s_btch* objects and less access to se36.
5) Create support roles for cutover activity during Go-live
That is always needed. Go ahead.
6) Emergency roles & IT roles for support
This is very much needed as a role of Mitigation and Fire Fighting for Temporary access. Ensure to enable ur audit parameters in RZ10 (rsau* sm20,RSLG* for sm21). Give emergency access but enable audit via sm19 and get audit reports from sm20 and sm21 immediately after the use of emergency access.
There are also other auth objects we need to be care ful which is a long list and hope every body ensures that (s_cts,a_admi,s_trans, tables ssm_cust, prgn,t000) etc and a host of others. Besh wishes. Let us know if any issue.
Regards
Aveek.

Need knowledge on sap upgrade 4.7 to ecc 6.0 in abap reports and sap query

please give me some ideas and useful links on sap upgrade 4.7 to ecc 6.0 in abap reports and sap query

Hi Jaya,
Not very clear with your question.
Are you looking for changes in areas od ABAP reports & SAP query when we upgrade SAP from 4.7 to ECC 6.0 ??
If the response is YES, then please refer to SAP solution browser www.sapsolutionbrowser.com
Define source release and target release .
You will get module wise details on new features for target release.
Hope this helps.
Regards,
Deepak Kori

Need a GR/IR report similar to MB5S but with dates

Hello MM Gurus,
Is there a GR/IR report similar to MB5S but with dates?
Is there an S_ALR report?
Thanks
George

ME80FN with document date field, select purchase order history. Both GR and IR documents displayed here. Also use LIS reports like MCE3, MCE1 and othere but with period selection.
If it helps, kindly give points.
Regards,
RM

Work with data from a table of another SAP R/3 system

Hi,
I want to work with data from a table of another system. I know there's a function called 'RFC_READ_TABLE' but I don't know really how it works. What I want to do is to get data from that system and pass it to the one where I'm working in order I can continue working with this data in the report.
Besides, I'd like to select only the records that have some conditions.
I'd appreciate if someone could tell how to do it, whether with FM 'RFC_READ_TABLE' or in another way.
Thanks in advance,
Gerard
P.S: The systems are already connected in SM59

Yes, you can use RFC_read_table .You can pass the number of columns but I recommend you to bring all results in your internal table after that you can filter the records. Most of the time I have notice when you make RFC call with this FM to another system it works but it may also happen that other system controlling authorization and then it might give you nothing. As I face this problem on my last Project.
Hope thisll give you idea!!
<b>P.S award the points.</b>
Good luck
Thanks
Saquib Khan
"Some are wise and some are otherwise"

PDF Creation with data from SAP system

Hi All,
I need to generate a PDF file using Adobe Document Service. The content of the PDF can be from any datasource (Oracle/ BW/ R3 ), So I require Webdynpro code for pdf creation with data from any of the system

Hi Deepak,
Before starting the code just like that,make sure u have configured all services in Visual Administrator.
U can refer this:
<a href="http://help.sap.com/saphelp_nw2004s/helpdata/en/95/5a08cd0e274a0bae559622d6670722/frameset.htm">Configuration Guide</a>
regards
Sumit

Keynote document saved in icloud not updating with data from Numbers? is icloud the problem

keynote document saved in icloud not updating with data from Numbers? is icloud the problem.
If both files are held locally on the computer it looks like there is no problem however if you try and do it though icloud (ie your docs are saved on icloud) you dont get the "source" oprion besides the graph etc. Is this a but or a broken function due to the new implementation of icloud.

Hi sebnor31,
This is Visual C# forum, but your question seems not related to Visual C# language itself. It most likely related to the bluetooth message transaction protocal or with the device itself.
I'll move your question to [where is this forum for...] forum where the morderator may direct you to the correct forum.
Thanks for your understanding.
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Updation of INPUT Request fields in PI sheet automatically from xMII system

Hi,
We are getting the consumption data(Material Weight and Batch) from xMII in SAP browser based PI sheet through Z function module as a parameters .These values needs to updated automatically in PPPI_INPUT-REQUEST fields (PPPI_MATERIAL_CONSUMED & PPPI_BATCH),so that PI_CONS(Consumption) process message will be created automatically.
We are facing problem to update the input request fields(PPPI_MATERIAL_CONSUMED and PPPI_BATCH) automatically in Browser based PI sheet.
Can you please help us out to populate the input request fields automatically in PI sheet to automate the xMII with SAP PI sheet. I can provide the screen shots of PI sheets and configuration of process management if required.
Thank you
Warm Regards
Darga Ali

Hello Udayan,
The issue is in SAP PI Sheet.
We are getting the data from xMII into variables through function module and able to populate these values in PI sheet,But we need to update these values directly in input request fields ,so that it will create a process message and updated the process order with material consumption data.
Is there any functionality available in xMII ,to update the vaules directly in input request fields in PI sheet.
Thank you
Warm Regards
Darga Ali

Filling dynamic internal table with data from other internal table

Hi Friends,
My problem is that i have already built a dynamic internal table
(class int_table->create) but now i want to fill it with data from other internal table.
The dynamic table column name and the field value of the data filled internal table are same, but how to access that column name, since i cant hard code it anyway.
Like if my werks field value is '8001'. I want to place it under the column 8001 of dynamic table, Can anybody help me in this regard?
Awarding points is not a problem for even giving a slight hint.
Best Regards

Hi
See this
Dynamic internal table is internal table that we create on the fly with flexible column numbers.
For sample code, please look at this code tutorial. Hopefully it can help you
Check this link:
http://www.****************/Tutorials/ABAP/DynamicInternaltable/DynamicInternalTable.htm
Sample code:
DATA: l_cnt(2) TYPE n,
l_cnt1(3) TYPE n,
l_nam(12),
l_con(18) TYPE c,
l_con1(18) TYPE c,
lf_mat TYPE matnr.
SORT it_bom_expl BY bom_comp bom_mat level.
CLEAR: l_cnt1, <fs_dyn_wa>.
Looping the component internal table
LOOP AT it_bom_expl INTO gf_it_bom_expl.
CLEAR: l_cnt1.
AT NEW bom_comp.
CLEAR: l_cnt, <fs_dyn_wa>, lf_mat.
For every new bom component the material data is moved to
temp material table which will be used for assigning the levels
checking the count
it_mat_temp[] = it_mat[].
Component data is been assigned to the field symbol which is checked
against the field of dynamic internal table and the value of the
component number is been passed to the dynamic internal table field
value.
ASSIGN COMPONENT c_comp_list OF STRUCTURE <fs_dyn_wa> TO
<fs_check>.
<fs_check> = gf_it_bom_expl-bom_comp.
ENDAT.
AT NEW bom_mat.
CLEAR l_con.
ENDAT.
lf_mat = gf_it_bom_expl-bom_mat.
Looping the temp internal table and looping the dynamic internal table
*by reading line by line into workarea, the materialxxn is been assigned
to field symbol which will be checked and used.
LOOP AT it_mat_temp.
l_nam = c_mat.
l_cnt1 = l_cnt1 + 1.
CONCATENATE l_nam l_cnt1 INTO l_nam.
LOOP AT <fs_dyn_table2> ASSIGNING <fs_dyn_wa2>.
ASSIGN COMPONENT l_nam OF STRUCTURE <fs_dyn_wa2> TO <fs_xy>.
ENDLOOP.
IF <fs_xy> = lf_mat.
CLEAR lf_mat.
l_con1 = l_con.
ENDIF.
Checking whether the material exists for a component and if so it is
been assigned to the field symbol which is checked against the field
of dynamic internal table and the level of the component number
against material is been passed to the dynamic internal table field
value.
IF <fs_xy> = gf_it_bom_expl-bom_mat.
ASSIGN COMPONENT l_nam OF STRUCTURE <fs_dyn_wa> TO <fs_check>.
CLEAR l_con.
MOVE gf_it_bom_expl-level TO l_con.
CONCATENATE c_val_l l_con INTO l_con.
CONDENSE l_con NO-GAPS.
IF l_con1 NE space.
CONCATENATE l_con1 l_con INTO l_con SEPARATED BY c_comma.
CLEAR l_con1.
l_cnt = l_cnt - 1.
ENDIF.
<fs_check> = l_con.
l_cnt = l_cnt + 1.
ENDIF.
ENDLOOP.
AT END OF bom_comp.
At end of every new bom component the count is moved to the field
symbol which is checked against the field of dynamic internal table
and the count is been passed to the dynamic internal table field
value.
ASSIGN COMPONENT c_count OF STRUCTURE <fs_dyn_wa> TO <fs_check>.
<fs_check> = l_cnt.
INSERT <fs_dyn_wa> INTO TABLE <fs_dyn_table>.
ENDAT.
ENDLOOP.
Reward if useful
Anji

To populate dynamically created int table with data from other table

Hi everybody,
I have already created an internal table dynamically, but now want to populate it with data from another IT depending on the plant name.
My dynamic int table contains fields with plant name like '8001' ,'8002' and so on.
no I want to read data from the other table and depending on bwkey which contains similar data like plant name , want to append to this new dynamic int table through read key statement.
I cannot reference the field name hard coded as it does not allow field symbol reference to be hard coded.
Pls help.

Hi,
Check the code below:
REPORT ztestdyn.
TYPE-POOLS : slis.
TABLES: yyle0003.
DATA:
g_exit    TYPE c,
g_save    VALUE 'A',               "For parameter I_SAVE
g_repid   LIKE sy-repid,           "For program name
g_variant TYPE disvariant.         "For parameter IS_VARIANT
*Tables
DATA: d_ref TYPE REF TO data,
        d_ref1 TYPE REF TO data,
        i_alv_cat1 TYPE TABLE OF lvc_s_fcat,
        ls_alv_cat1 LIKE LINE OF i_alv_cat1.
DATA: BEGIN OF total_tab OCCURS 0 ,
        tknum TYPE yyle0003-tknum,
        quantity TYPE p, "yyle0003-QUANTITY,
        END OF total_tab.
DATA: BEGIN OF g_scandata_tab OCCURS 0.
          INCLUDE STRUCTURE yyle0003.
DATA: END OF g_scandata_tab.
DATA: g_yyle0003_tab LIKE yyle0003 OCCURS 0 WITH HEADER LINE.
DATA: g_itab1 TYPE TABLE OF yyle0003.
DATA: wa_itab1 LIKE g_scandata_tab.
TYPES: BEGIN OF itab2,
         tknum TYPE yyle0003-tknum,
         vhilm TYPE yyle0003-vhilm,
         quantity TYPE p,
         END OF itab2.
DATA: g_itab3 TYPE TABLE OF itab2.
DATA: wa_itab3 TYPE itab2.
DATA: g_itab5 TYPE TABLE OF itab2.
DATA: wa_itab5 TYPE itab2.
DATA: g_itab4 TYPE TABLE OF itab2.
DATA: wa_itab4 TYPE itab2.
DATA: gv_wa TYPE REF TO data.
DATA : wa_tab TYPE itab2.
DATA: BEGIN OF itab6 OCCURS 0,
         vhilm TYPE yyle0003-vhilm,
         quantity TYPE p,
         END OF itab6.
******************Start of Internal Table Definition *******************
DATA:
        g_custom_container_0100 TYPE REF TO cl_gui_custom_container,
        g_alv_grid_0100    TYPE REF TO cl_gui_alv_grid,
        g_container_0100   TYPE scrfname VALUE 'LIST',
        g_mylayout         TYPE lvc_s_layo,
        ok_code            LIKE sy-ucomm.
FIELD-SYMBOLS :<f_fs> TYPE table,
                 <f_fs11> TYPE table,
                 <f_fs1> TYPE table,
                 <f_fs3> TYPE ANY,
                 <f_fs4> TYPE ANY,
                 <f_field> TYPE ANY,
                 <f_fs5> TYPE ANY.
FIELD-SYMBOLS: <fs_wa> TYPE ANY.
DATA: l_var TYPE i,
        l_i   TYPE i.
DATA: l_var1 TYPE char20,
        l_var2 TYPE char20.
DATA: l_TOTAL TYPE I,
      L_FILL TYPE i,
      L_TOT TYPE I.
DATA: l_int TYPE i,
       l_sum TYPE i.
FIELD-SYMBOLS: <f_fs2> TYPE itab2, "
                 <f_fs6> TYPE ANY,
                 <f_fs7> TYPE ANY.
DATA: l_var3 TYPE char15.
DATA: l_quant TYPE p.
FIELD-SYMBOLS: <f_fs8> LIKE itab6, "
                 <f_fs9> TYPE ANY,
                 <f_fs10> TYPE ANY.
FIELD-SYMBOLS : <f_fs12> TYPE ANY,
                  <f_fs13> TYPE ANY.
SORT g_scandata_tab BY tknum vhilm.
LOOP AT g_scandata_tab INTO wa_itab1.
    MOVE-CORRESPONDING wa_itab1 TO wa_itab3.
    APPEND wa_itab3 TO g_itab3.
ENDLOOP.
LOOP AT g_itab3 INTO wa_itab3.
    COLLECT wa_itab3 INTO g_itab4.
ENDLOOP.
LOOP AT g_itab4 INTO wa_itab4.
    MOVE-CORRESPONDING wa_itab4 TO wa_itab5.
    MOVE-CORRESPONDING wa_itab4 TO itab6.
    APPEND wa_itab5 TO g_itab5.
    COLLECT itab6.
ENDLOOP.
CLEAR wa_itab3.
SORT g_itab4 BY tknum vhilm.
DELETE ADJACENT DUPLICATES FROM g_itab4 COMPARING vhilm.
DESCRIBE TABLE g_itab4 LINES l_var.
l_i = '2'.
ls_alv_cat1-fieldname = 'TKNUM'.
ls_alv_cat1-col_pos = 1.
ls_alv_cat1-coltext ='ShipmentNo.'.
APPEND ls_alv_cat1 TO i_alv_cat1.
DATA: l_var4(10) TYPE c,
        l_var5(10) TYPE c,
        l_fieldname(20) TYPE c..
LOOP AT g_itab4 INTO wa_itab4.
    IF l_var >= 1.
      CONDENSE wa_itab4-vhilm NO-GAPS.
      ls_alv_cat1-fieldname = wa_itab4-vhilm. "l_fieldname.
      ls_alv_cat1-col_pos = l_i.
      ls_alv_cat1-coltext = wa_itab4-vhilm.
      ls_alv_cat1-do_sum ='X'.
      APPEND ls_alv_cat1 TO i_alv_cat1.
      CLEAR : ls_alv_cat1, l_fieldname.
      l_i = l_i + 1.
    ENDIF.
    AT LAST.
      ls_alv_cat1-fieldname = 'TOTAL'. "l_fieldname.
      ls_alv_cat1-col_pos = l_i.
      ls_alv_cat1-coltext = 'TOTAL'.
      ls_alv_cat1-do_sum ='X'.
      APPEND ls_alv_cat1 TO i_alv_cat1.
      CLEAR : ls_alv_cat1, l_fieldname.
    ENDAT.
    SORT i_alv_cat1 BY fieldname.
    DELETE ADJACENT DUPLICATES FROM i_alv_cat1.
ENDLOOP.
SORT i_alv_cat1 BY col_pos.
CALL METHOD cl_alv_table_create=>create_dynamic_table
    EXPORTING
      it_fieldcatalog = i_alv_cat1
    IMPORTING
      ep_table = d_ref.
ASSIGN d_ref->* TO <f_fs>.
CREATE DATA gv_wa LIKE LINE OF <f_fs>.
ASSIGN gv_wa->* TO <fs_wa>.
DELETE ADJACENT DUPLICATES FROM <f_fs> COMPARING ALL FIELDS.
    LOOP AT itab6.
    CLEAR wa_itab5.
    wa_itab5-tknum = 'Total'.
    MOVE-CORRESPONDING itab6 TO wa_itab5.
    APPEND wa_itab5 TO g_itab5.
    CLEAR wa_itab5.
ENDLOOP.
     DESCRIBE TABLE g_itab5 LINES L_TOT.
       LOOP AT TOTAL_TAB.
      L_TOTAL = L_TOTAL + total_tab-quantity.
     ENDLOOP.
LOOP AT g_final ASSIGNING <f_fs2>.
    ASSIGN COMPONENT 'TKNUM' OF STRUCTURE <f_fs2> TO <f_fs6>.
    ASSIGN COMPONENT 'TKNUM' OF STRUCTURE <fs_wa> TO <f_fs7>.
    <f_fs7> = <f_fs6>.
    CONDENSE <f_fs2>-vhilm NO-GAPS.
    ASSIGN COMPONENT 'VHILM' OF STRUCTURE <f_fs2> TO <f_fs3>.
    ASSIGN COMPONENT 3 OF STRUCTURE <f_fs2> TO <f_fs4>.
    MOVE <f_fs3> TO l_var1.
    ASSIGN COMPONENT l_var1 OF STRUCTURE <fs_wa> TO <f_fs5>.
    <f_fs5> = <f_fs4>.
    CLEAR total_tab-quantity.
    READ TABLE total_tab WITH KEY tknum = <f_fs6>.
    IF sy-subrc = 0.
      ASSIGN total_tab-quantity TO <f_fs12>.
      ASSIGN COMPONENT 'TOTAL' OF STRUCTURE <fs_wa> TO <f_fs13>.
      <f_fs13> = <f_fs12>.
    ENDIF.
    L_FILL = L_FILL + 1.
    IF L_FILL = L_TOT.
     ASSIGN L_TOTAL TO <f_fs12>.
      ASSIGN COMPONENT 'TOTAL' OF STRUCTURE <fs_wa> TO <f_fs13>.
      <f_fs13> = <f_fs12>.
    ENDIF.
    AT END OF <f_fs2>-tknum.
      APPEND <fs_wa> TO <f_fs>.
      CLEAR <fs_wa>.
    ENDAT.
ENDLOOP.
CLEAR: <f_fs6>,
          <f_fs7>.
CLEAR <fs_wa>.
CALL SCREEN 0100.
*&      Module STATUS_0100 OUTPUT
      text
MODULE status_0100 OUTPUT.
SET PF-STATUS 'ZVKS'.
SET TITLEBAR 'ZVKS'.
CHECK sy-ucomm IS INITIAL.
SORT g_scandata_tab BY tknum vhilm.
CREATE OBJECT g_custom_container_0100
         EXPORTING container_name = g_container_0100
         EXCEPTIONS
           cntl_error = 1
           cntl_system_error = 2
           create_error = 3
           lifetime_error = 4
           lifetime_dynpro_dynpro_link = 5.
CREATE OBJECT g_alv_grid_0100
         EXPORTING i_parent = g_custom_container_0100.
g_mylayout-grid_title = 'Display Scanning data'.
CALL METHOD g_alv_grid_0100->set_table_for_first_display
    CHANGING
      it_outtab                     = <f_fs>
      it_fieldcatalog               = i_alv_cat1
                EXCEPTIONS
                  invalid_parameter_combination = 1
                  program_error                 = 2
                  too_many_lines                = 3
                  OTHERS                        = 4.
IF sy-subrc <> 0.
              MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
                         WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
ENDMODULE.                 " STATUS_0100 OUTPUT
Regards
Kannaiah

Transfer a table with data from 1 client to another client

Hi experts please focus on this issue. what is table maintainance generator? what is the main advantages of it.
how can we transfer a table with data from 1 client to another client.
Thanks in advance
vamsi.

Table maintenance generator can be generated via se11 on your table.
The advantage is that the table can manaully be updated via SM30.
If you want to transport to another client the table content, I think you can :
- Generate a transport request in SM30 ( Transport button)
- use SCC1 to transport from a client to another.
Regards,
Erwan

Table - populate one table with data from the list of another table

Hello All,
I am a newbie in Swing and am a book and few tutorials old.
I am trying to achieve the following:
(1) I populate Table1 (a JTable) with a list of data - each row consists of several columns. And I have a Table2 (also JTable) that is in the beginning empty.
Both the tables (Table1 and Table2) are showed in the window.
(2) Lets say, there's a button (JButton) in between the two tables.
Now if I Select a row from Table1 and press the button, this row will be sent/copied to Table2.
And this way I can choose different rows and pass the data to Table2.
I have manages to make Table1 and put data in it ... but for the rest, I don't know where and how to begin.
Would appreciate some ideas and tips.
Thank you.

Since you are using a button to start the copy process you don't need to worry about a ListSelectionListener or a MouseListener. You need to create a button with an ActionListener that does the following:
a) Create an Array based on the size of the number of columns in the table
b) get the index of the selected row
c) populate the Array with data from the TableModel by using the table.getModel().getValueAt(...) method for each
d) Now you can add the row of data to the other JTable by updating its model.
DefaultTableModel model2 = (DefaultTableModel)table2.getMode();
model.addRow( theArray );

Prepopulating PDF Fillable Forms with data from XML files

How can I get a PDF fillable form to open pre-populated with data from an XML file automatically? I've been using Adobe Standard 9.0 and am willing to upgrade in a modest fashion if necessary. I am aware of the Navigation method > Forms > Manage Form Data > Import Data. This works fine, however, my users are not smart enough to do tis much clicking and selecting. Is there an automated way to have this XML data merged into the PDF file on the fly. These files will reside on an internal local area network and will be operated on local PC's that will probably have Acrobat Reader ONLY. I have been told that the only way to accomplish this is through Java Scripting. I would prefer to do this the 'old fashioned' way of command line switches, but that does not appear to be an option. Does anyone have a sample Javascript that would accomplish what I am trying to achieve. Any help would be greatly appreciated.

Hi Sharon
The easiest way is:
- Open your PDF form within Acrobat
- From the File menu, import the XML form data into the form
- From the File menu, use Save As... to save the file with a new name.
The new PDF will be identical to the original one, but will have the data embedded in it. Voila.
If you want the same form to pre-populate with different XML files depending on the circumstances, or if you're generating the XML on the fly, then things get more complicated. (And more expensive.) As your consultant said, LiveCycle Forms is one option, but it is expensive (actually even more than 10K). There are other options, including Cold Fusion, custom servlets, etc.
Howard
http://www.avoka.com

Make readonly pdf with data from forms

Hi there,
I really appriciate any help on this issue...
I am not able to make read only file with data from the fillable pdf forms.
Requirement is my client need some form where they can enter some data and make a read only file from those forms and send them to their clients.
So I made fillable form in acrobat and send them, they will use reader to fill up the form but I dont know how to save those file with data so it will become just a document.
is there any way ?
Thanks....
-M.

I am soory I am slow...
I made form file in acrobat... but after that my client is going to use reader and enter data to this forms and saves it. and then my client is going to send them to their customers.
So I shall use reader code and make all fields read only right ?
In this case I have to make a button and run this code on submit ?
Thanks.
-M.

How do I replace data on my PC with data from iCloud?

How do I replace data on my PC with data from iCloud?

This long article covers all types of transfers, including moving to a new computer: http://www.ilounge.com/index.php/articles/comments/moving-your-itunes-library-to -a-new-hard-drive

Update ABAP Report in SAP R/3 with data from xMII

Similar Messages

Maybe you are looking for