Update data from ODS to ODS with infopackage selection

Hi,
I am trying to update data from one ODS to another ODS with selection criteria in InfoPackage which is created manually.For Full load I can give selection criteria in InfoPackage. When I initialize data Selection is greyed out even selections for Full load exists. Please advise me how to give selections for delta loads from ODS to ODS loads.
Thanks in advance.
Ram

Once you started an ODS as destination in FULL mode from a DS you cannot get back.
So if you want to update from ODS to ODS using Change Log but considering only some data records you could create an Update Routine with a Start Routine that DELETES undesired records (e.g. DELETE DATA_PACKAGE WHERE ...) and then start an Init-Delta Loading.
Hope it helps
GFV

Similar Messages

Error while updating data from PSA to ODS

Hi Sap Gurus,
I am facing the error while updating data from PSA to ODS in BI 7.0
The exact error message is:
The argument 'TBD' cannot be interpreted as a number
The error was triggered at the following point in the program:
GP44QSI5RV9ZA5X0NX0YMTP1FRJ 5212
Please suggest how to proceed on this issue.
Points will be awarded.

Hi ,
Try to simulate the process.That can give you exact error location.
It seems like while updating few records may be no in the format of the field in which it is updated.
Regards
Rahul Bindroo

Cannot update data from DSO to Cube with further update in process chain

Hi Guys,
              This is the message am getting when am trying to update to cube by process further update with process chain.Process fails at further update with the following below message.
However at DSO level i can see the data mart status but no request at cube level.
Error Message:
Cannot update request REQU_D57WAP7Z2WAI1CG5Y5OQ5W7JR in data target
    Message no. RSM1523
Diagnosis
    System checks show that request REQU_D57WAP7Z2WAI1CG5Y5OQ5W7JR cannot be
    updated to a data target.
    The system checked whether
    o   request REQU_D57WAP7Z2WAI1CG5Y5OQ5W7JR is already in the data target
    o   the data target has active update rules for the InfoSource
    o   the data target was selected for updating
    o   locks exist
    o   for a DataStore object as a data target, that the request was
        updated in the correct order, if the DataStore object stipulates
When i check the monitor screen under status tab it says "A caller 01, 02 or equal to or greater than 20 contains an error meesage" and under details tab "Data Package 1 : arrived in BW ; Processing : Data packet not yet processed "
Regards,
Krishna.
Edited by: krishna Krishna on Mar 4, 2009 6:37 PM

Hi
It seems you used infopack when you select update data inot datatarget then system prompts you a infopack.That's the infopack which is generated by system being used in process chain variant to update data into datatarget.
Create new infopack/ DTP manually then use that infoapck/DTP on the process chain variant then try.
Chandu.

Error when loading the data from PSA to ODS......

Hi BW guru's,
i am facing one problem while loading the data from PSA to ODS.so please help me in this regard.
Please give a step by step guidelines for me...
the error while loading the data from PSA to ODS is "There are no PSA tables for these selection criteria","An error occurred when reading PSA data".
thanks in advance,
ashok.

hi ashok,
u can push data from psa to ods, for this goto the psa in rsa1>psa>goto that request>rightclick>select " schedule update Immediately ", then data will moved from psa to ods.
or
In ods > delete the failed request>goto the processing tab-->select 3rd option " psa and then subsequentially to data targets ", --> schedule the infopackage.
bye
sunil

Load data from PSA to ODS in Process Chain

Hi All,
I want to load the data from PSA to ODS. I am using 3.5 Version. I have created the Info Package to load the data from R/3 to ODS.
I just want to load data in the following Condition
1. Need to load data from R/3 to PSA.
2. Need to load data from PSA to ODS.
I need to include this two Info Packages in Process Chain.
I dont find any option to load PSA to ODS through Process Chain..
Pls Suggest.
Thanks,
Ram.

Hi Ram,
You can keep the settings in the infopackage to load data from R/3 to PSA (by giving the settings as PSA and then into datatargets). Specify the option Update in all data targets for which the Rule Exist unde rthe Data Targets Tab.
Then in Process Chian, there is an option by the name REad PSA and Update Datatarget under the node Load Process and Post-Processing in the Process Types.
In the varaint, specify the infopackage name and save the varinat and uise it in the PC.
Regards
Sunil

Error when i am loading data from PSA to ODS

hai Gurus
Very good morning
Actually i am loading data from PSA to ODS.
But when i am loading data i am getting the error InfoObject/BIC/0REFER_DOC does not contain ALPHA -CONFORMING VALUE 0.
Can anybody help me to solve the problem and reload the data
Thanks & Regards
Jayavardhan

Hi,
Lacs of postings are there in this forum on this topic. Searching teh forum is the best option for u now.
With rgds,
Anil Kumar Sharma .P

Loading Data from PSA to ODS

Hi,
right now there are nearly 50 requests in my PSA. I want to load entire data from PSA to ODS at a time. Ours is 3.x flow. I m able to load one request at a time. Can anyone help me to load all requests at atime?
Please give me step by step.

Hi Narendra,
First of all all the records are unable to pick up at a time i single attempt due to. follow the reason
It is not possible to load all the PSA requests' to target at a time.Because records picks up from PSA to Data target one by one due dependencies of routine run on the data transfer up to the extent. anyway if you can do this thing the process of loading the requests' one by one, offcourse it is totally depends upon manual .
Hope you are understood the scenario.
Regards,
Vamsi Krishna Chandolu

Update data from cube to cube in BW 3.5

Dear Experts,
Can we update data from one cube to another cube in BW 3.5. i tried it, I created the connection between two cubes as i did in ods to cube through update rules but there is no option like in ods to send the data(update dso data to data targets).Please help me on this.

hi arvind,
Thanks, but i have some doubt again, i did it and also data transfered to the second cube, but after creating the connection i went to bi7 in infosource and there i found that cube name starting with 8(cube name), but my question is can i do it in bw3.5 without going to rsa1.

How to load data from a virtual cube with services

Hello all,
we have set up a virtual cube with service and create a BEx report to get the data from an external database. That works fine. The question is now:
Is it some how possible to "load" the data from this virtual cube with service (I know that there are not really data...) into an other InfoCube?
If that is possible, can you please give my some guidance how to set up this scenario.
Thanks in advance
Jürgen

Hi:
I don't have system before me, so try this.
I know it works for Remote Cube.
Right Click on the Cube and Select Generate Export Data Source.
If you can do this successfully, then go to Source Systems tab and select the BW. Here, Right CLick on select Replicate DataSources.
Next, go to InfoSOurces, click on Refresh. Copy the name of Virtual Cube and add 8 as a prefix and search for the infosource.
If you can see it, that means, you can load data from this cube to anywhere you want, just like you do to ODS.
ELSE.
Try and see if you can create an InfoSpoke in Virtual Cube. Tran - RSBO.
Here, you can load to a database table and then, from this table, you can create datasource, etc.
ELSE.
Create query and save it as CSV file and load it anywhere you want. This is more difficult.
Good luck
Ram Chamarthy

Updating data from PSA to Data Target

Hi,
I just want to update data from PSA to data target.
There is a process chain running daily it will updating Master Data in to 0Vendor object. This process chain is updating only upto PSA not the data target. I just want to update from PSA to data target.
There is a update rule for 0Vendor but itu2019s not active at the movement and also it is not properly mapped with the 0Vendor.
Is there any other method which I can update data from PSA to Data target with in the same process chain.
Thanks
Ganesh

If this is BW 3.5, change the infopackage setting to load to data target as well.
This is a other w ay than using the update from infopackage.
if this is 7.0, Use the DTP to load from PSA(datasource) to Target.
Let me know if this helps.
Thanks
Sachin

Update data from a view

Hi,
trying to update data from a view with:
- Company (table)
- Products (table)
In a form, the user wants to update
e.g: both products.product_name and Company.company_name.
Is there a way to update a view records built on 2 tables ?
Any idea will be really appreciated
Thks

An other question on INSTEAD OF Trigger:
Base Tables:
1.
SQL> desc pcs_companies;
Name Null? Type
COMPANY_ID NOT NULL NUMBER(12)
COUNTRY VARCHAR2(350)
COMPANY_NAME VARCHAR2(320)
COMPANY_PHONE VARCHAR2 (320)
COMPANY_FAX VARCHAR2(320)
COMPANY_URL VARCHAR2(150)
UPDATED_DATE DATE
2.
SQL> desc pcs_individuals;
Name Null? Type
INDIVIDUAL_ID NOT NULL NUMBER(12)
COMPANY_ID NUMBER(12)
FIRST_NAME VARCHAR2(320)
LAST_NAME VARCHAR2(320)
LOB VARCHAR2(300)
JOB_ROLE VARCHAR2(300)
TITLE VARCHAR2(300)
GENDER VARCHAR2(3)
EMAIL VARCHAR2(720)
FAX VARCHAR2(720)
PHONE_NO VARCHAR2(720)
UPDATED_DATE DATE
COUNTRY VARCHAR2(150)
ADDRESS_1 VARCHAR2(720)
ADDRESS_2 VARCHAR2(720)
ADDRESS_3 VARCHAR2(720)
CITY VARCHAR2(720)
3. pcs_individuals.COMPANY_ID = FK, ref pcs_companies.
4.
SQL> CREATE VIEW V_PCS_COMPANY_IND
AS
SELECT
   i.INDIVIDUAL_ID,
   c.company_id,
   c.country,
   c.Company_name,
   c.company_phone,
   i.Company_id indiv_company_id,
   i.gender,
   i.first_name,
   i.last_name,
   i.lob,
   i.job_role,
   i.title,
   i.email_address,
   i.fax,
   i.phone_no ,
   i.address_1,
   i.address_2,
   i.address_3,
   i.city
FROM
  pcs_individuals i,
  pcs_companies c
WHERE
  i.company_id = c.company_id
5.
CREATE OR REPLACE TRIGGER PCS_ADMIN.PCS_COMP_IND_UPDATE_TR
INSTEAD OF UPDATE ON PCMS_ADMIN.V_PCS_COMPANY_IND
FOR EACH ROW
begin
update PCS_COMPANIES
set
     Company_name = nvl(:new.company_name,company_name),
     company_phone = nvl(:new.company_phone,company_phone)
where company_id = :new.company_id;
update PCS_INDIVIDUALS
set
     gender = nvl(:new.gender,gender),
first_name = nvl(:new.first_name,first_name),
     last_name = nvl(:new.last_name,last_name),
     lob = nvl(:new.lob,lob),
     title = nvl(:new.title,title),
     email_address = nvl(:new.email_address,email_address),
phone_no = nvl(:new.phone_no,phone_no),
     fax = nvl(:new.fax,fax),
     country = nvl(:new.country,country),
     address_1 = nvl(:new.address_1,address_1),
     address_2 = nvl(:new.address_2,address_2),
     address_3 = nvl(:new.address_3,address_3),
     city = nvl(:new.city,city)
where company_id = :new.company_id;
end PCMS_COMP_IND_UPDATE_TR;
6.
CREATE OR REPLACE TRIGGER PCS_ADMIN.NEW_COMPANY_ID_INSERT
INSTEAD OF INSERT ON PCS_ADMIN.V_PCS_COMPANY_IND
DECLARE
ID number;
BEGIN
INSERT INTO pcs_companies (org_id)
select v_pcs_comp_id_seq.nextval
into ID
from dual;
:new.company_id = ID;
INSERT INTO pcs_individuals (company_id)
select v_pcs_comp_id_seq.nextval
into ID
from dual;
:new.company_id = ID;
end;
My question
On point 6:
Assumption:
- Company_id is PK of pcs.Company and FK in pcs.individuals
- It should be feed by sequence (v_pcs_comp_id_seq)
Now how can i insert the same value for company_id (current.v_pcs_comp_id_seq) in both pcs_companies and pcs_individuals ? I've tested it in the above INSTEAD OF Trigger.It failed.
Thks for any advice,
lamine

Extracting updated data from SAP R/3 to BOBJ DS

Hi all,
I have a doubt reg extracting updated data from SAP to BOBJ DS. For example i am extracting 50000 records from SAP table to BOBJ DS say its taking half an hour, after extracting data 10 more records have added in the same table. Do we need extract the whole record again or do we have some other way to extract only those 10 records from table.
Please help me. I have searched in forums but cudnt find the exact solution fyi.
Thanks,
Guna

Apart from stepd 1,2, you need to create a Target Data store and a table to load your MARA data.
3. Now the MARA data will be available in data store(DS_ERP), say table name as BO_MARA
Why do you want to change the table name? Are you planning to stage the data anywhere?
4. Create a dataflow source as BO_MARA, query transform and destination as a table
Data transport object is required if you are using R/3 Data Flow.
This would suffice just for a full load, if all your transformations can be incorporated inside the Query transform.
5. Do Transformation.
6. Transformed data will be available in target table.
Only after executing the job that the transformed "data" will be available in the target.
The above part mentions only about a Source, Query transform, Source Data Store and table.
Apart from these
You would require a Script object to write the condition, to SELECT the MAX timestamps. You would require Variables to be created in your job to redirect your job path and to restrict the data extracted.
Use your DataFlow in a Conditional object. If load type is first, in the then part use the dataflow which you might have already designed. Else part will have a replicated Data Flow with the above mentioned WHERE condtion in Query transform.
Suggest you to refer Desiger document and DI supplement for SAP as well. Inform if you are stuck.
Regards,
Suneer Mehmood.

Can someone tell me how to delta update data from db like oracle?

Hi gurus:
as the title,can someone tell me how to delta update data from db like oracle?
and can someone give me some link about the detail of delta update?
thanks very much.
chan

Hi,
Check help links
Data Transfer with DB Connect
http://help.sap.com/saphelp_nw04/helpdata/en/58/54f9c1562d104c9465dabd816f3f24/frameset.htm
http://www.bwexpert.com/downloads/DBConnectMakingDELTAABAPCode.doc
Delta Concept
http://help.sap.com/saphelp_nw04/helpdata/en/84/81eb588fc211d4b2c90050da4c74dc/frameset.htm
Thanks

Get the list of table's last Inserted/Updated date from a database

Hi All,
Good afternoon!
Please help me to find the last inserted/updated date from different tables in a database.
Consider I have a database called testDB, which contains 20 tables. Most of these tables will get data inserted/updated daily. But sometimes it may not happen due to some issues . We will not be knowing about this issue until we check in each table
manually. Now, somebody should be daily checking for the issues in this db. So, we have decided to make an alert mail to send this informations to us.
We need to check whether any of the table's in TetsDB has got inserted/updated data in one day difference.
I have tried this..
SELECT OBJECT_NAME(OBJECT_ID) AS Object_, last_user_update,*
FROM sys.dm_db_index_usage_stats
WHERE database_id = DB_ID( 'TestDB')
Thanks,
Julie

The solution depends on the version and edition of your SQL Server.
If you use SQL Server 2000 or SQL Server 2005, please visit these links:
How do I audit changes to SQL Server data?
Table Auditing with SQL Server 2000
If your SQL Server 2008 or above (only on the Enterprise edition), please have a look at this link:
Change Data Capture
If your SQL Server 2008 or above (all editions),
you can use Change Tracking, but Change tracking captures the fact that rows in a table were changed, but does not capture the data that was changed.
more info:
Comparing Change Data Capture and Change Tracking
Saeid Hasani [sqldevelop]
HI,
I've read about change tracking change data capturing now.
We need to track the data daily and we need to know whether any modification happens in those tables.
Will it make any performance issue if I enable change data capturing on multiple tables.. lets say 20+ tables.?

How to read updated data from a real-time generated file?

I have a question:
I want to read the 10 mostly updated data from a real time generated data file. The data in this file is accumulated. how can i read mostly recently data to an applet? and further to using this data to draw a real-time graph? pls help
kelvin t.l. tse

Hi,
I think there is no "typical" way. You will have to define a convention on how the new data are stored into the file, so as to know how to accessthem. If new data are simply put at theend of your file, you may use a RandomAccessFile to read only those lines that interest you (the 1 final lines).Otherwise, you should at least know how the data file is written.
You can know if thedata file has been modified with the File.lastModified() method. This retrurns a long value corresponding to the date and hour the file was last modified. Store that value ito you appl. and perdiodically (use a Thread), compare that value with the value returned by lastModief(). If both value are NOt equal, then the file has been updated
it's all a question of knowing how the data are stored into the datafie generated.
Be also aware that you will probably have problem when your java appl. tries to read the file at the same time it is updated by the other application. I guess when theother application writes data into the file, you will not be able to read it. So, use try{} catch statements and first check to see if you can read the file with File. canRead(). If not, simply delay the reading process by asking a Thread.yield() or Thread.delay (1000)...
vincent

Update data from ODS to ODS with infopackage selection

Similar Messages

Maybe you are looking for