"update failed 6" screen

Every now and then my iPhone shows me a screen that says "update failed 6" and then below two buttons cancel or accept...
I don't know what it means, can somebody help me please?
I know that propably with doing a clean install it will help but I also really want to know what it means
technical information:
iPhone 5S 16 gb
iOS 8.1 (the latest version)

Hello,
Just wondering if you ever were able to solve this problem, since I have this problem too...?
It first occurred to me when going abroad (to The Netherlands), there it suddenly popped up on my screen, after the "update failed 6" message I also got the "update failed 8" error on my screen. But now since I got back to the country I live in, it started popping up here now and then.
Maybe it has something to do with the provider? Because right after the first time I got this error, I received a message that I needed to restart my iphone in order to get my internet (mobile data) working abroad.

Similar Messages

N82 update failed BLACK SCREEN!!NEED HELP!!

Help!!
can someone help me??my n82 stop working..after i re install my firmware of n82 the v31.0.016 my phone suddenly turn off while updating..when i turn it back on t reconnect to the computer the screen only shows black and the lights..it is stuck in the black screen..and i cannot continue to update my phone because it is stuck in the black screen.can anyody help me??i tried the hard format using the cal button "3" and the "*" but still nothing happens.
HELP ME PLEASE.. ASAP..

try the last option read carefully
With all these operations I recommend you TAKE OUT MEMORY CARD and DO A BACK UP OF YOUR STUFF!!!
NOTE: In front of the hash key ( #) there is also a STAR key that people often miss and state that the code does not work.
1.. *#7780# - Restore factory settings - resets all the settings to the default ( you will not lose any data) Make sure you back up your data as you will lose all of it when you perform option 2 or 3 on this list. The default code for ALL operations listed here is 12345.
2.*#7370# - Reformat your phone (out of the box, tho keep in mind that most newer nokia phones at least n series, e series and s60 based phones have udp - user data preservation so not ALL data may be lost. still it is a good idea to always do a back up of your stuff.)3. This you perform as a last resort. Nothing else is working.If the phone is not showing any activity, proceed with hard formatting , turn off your phone, hold the following buttons while pressing the power button. (the default code is 12345)
3. hard reset - hold the following buttons * (star key), 3 (number button) and talk/green key. turn on the phone and do not release those buttons until you see the Nokia boot up screen. once you feel the phone power up you can let go off the power button while still holding all three buttons ( for Nokia 5800XM - use the following buttons to do a hard reset, /GREEN/RED/CAMERA keys pressed all at once on power up. this will only work on 5800's that have firmware version 20... and up. ) For Nokia N97 (unofficial version but works) is SHIFT /SPACE BAR / BACKSPACE while holding the power button. Again do not let go until you see the handshake screen.
If these codes are not working the only thing for you to do is contact your Nokia Care Center/Service for assistance.
You know what I love about you the most, the fact that you are not me ! In love with technology and all that it can offer. Join me in discovery....

I was updated my Iphone 4s from computer(ITunes).ITunes get error and update failed.(When Iphone is preparing.).And now ı can't use my IPhone.At the screen there is a USB cable and up of the screen there is ITunes' logo.PLEASE HELP!

I was updated my Iphone 4s from computer(ITunes).ITunes get error and update failed.(When Iphone is preparing.).And now ı can't use my IPhone.At the screen there is a USB cable and up of the screen there is ITunes' logo.PLEASE HELP!

Read what i say. Put iPhone in DFU mode. Connect with USB cable and restore.
Read:
http://www.apple.com/support/iphone/assistant/restore/

I have an iMac G4 PowerPC with OS 10.5.? The OS10.5.8 update failed. Now get blue screen and error-can't find Intel Power Manager. What now??

I have an iMac G4 PowerPC with OS 10.5.? After deleting 17G of music files to make room on the 74G drive, The iPhoto and iWeb updates seemed to load okay, but the OS 10.5.8 update failed - message opened said the computer encountered an error and must shut down. Now I get the blue screen. Startup with 'V' pressed shows multiple lines saying: error-can't find IntelCPU Power Manager. What now?? I reset PRAM, I think.....?????

I am concerned that you might have applied a system updated intended for an Intel iMac, while you have a PPC (non-Intel) iMac. Your PPC OS should not be looking for an "IntelCPU Power Manager."
Have you tried booting from the 10.5 install DVD/CD and repairing the hard drive, plus repairing permissions?
If you done the repairs mentioned above, and your problem still persists, you can also try doing a safe boot. (see http://support.apple.com/kb/HT1455 ) Then, if none of these things worked, if I were in your shoes (it's hard to diagnose these things without being there in person) I would first check that there is adequate disk space, then I would boot from the 10.5 DVD/CD install disk and reinstall the operating system. There is an option to do an archive and install preserving user files/settings, that would be the option you want, as it will save your files but install a new OS. Make sure you have a good backup of your files first. If you do not have one, use "target mode" to copy all your files before embarking on an new OS install. Assuming that you do succeed with this install, then use Software Update to get the right updates for your iMac.

ITunes 10.5.3 update failes to install

Window 7 64-bit currently running iTunes10.5.2.11
Every time i try and run the update for iTunes 10.5.3.3 x64 installer, it goes so far as to ask where to install (yes I ran the download manually after the automatic update failed a few times).
Each time it failes almost immeadiately with the error:
"The installer encountered errors before iTunes could be configured.
Errors occured during installation. Your system has not been modified.
Please run the installer again, or click Finish to exit."
I noticed a few things.
a) The version number in about iTunes does not show the x64 after it like the splash screen for 10.5.3
b) My iTunes is installed in Program Files (x86) which is where 32 bit versions generally get installed.
So do I currently have the 32 bit version installed and the auto installer is tring to update it to the 64 bit and that is why it fails?
I've tried run the install to Program Files instead of Program Files (x86). Fails just the same. Do I need to uninstall iTunes and reinstall to get the update to work?
Or is the 10.5.3 install just borked?

Try downloading the package for new installs. the update package failed, but the new install package worked for me without any trouble.
History:
I began this trouble shooting exercise by selecting Download Only through the Apple Update applet. Running the msi manually did not resolve the problem. In fact, it was more frustrating because the download package would disappear after running even though it failed, and I had to download it again. "Cleanup" I suppose. <frown>
I followed advice to remove the Apple Software Update program, reboot and re-run the msi. That did not resolve the failure.
I then followed advice to set permissions for Administrators on registry key HKLM\Software\Micorosoft\Windows\CurrentVersion\Installer\UserData\S-1-5-18\Com ponents
then reboot and run the update msi again. This also did not resolve the failure.
I downloaded the installer from the Apple download site as though it were a fresh install, and - voila! - it installed correctly and all content and settings were preserved. Hopefully that is all that is needed, not the steps above. Let me know! http://www.apple.com/itunes/download/

Photoshop cs4 11.0.2 update fails windows 7 64 bit

Hello..
I finally got upgraded to windows 7 64 bit and and installed the cs4 download I got awhile back and it installed cs4 11.0 no problems. I got every update to install but the 11.0.2 update fails and I get this message
"Adobe Setup has stopped working"
I have tried every thing I read, run as admin, move stuff out of appdat folder, reinstall.... reboot 39 times , I have no windowd defender or AV running at all everything I can find on here does not work and I get this error..... I read everyone gets this error except a darn few lucky souls..... so I tried compatibilty modes, it does the same error from win 98 all the way to win 7, xp same error vista same error it don't matter what version of windows this update seems to just stop working, so I did a troubleshooter on it and it determined that this program is incompatible with windows... I tried downloading it from Adobe and tried that... same error everytime.... don't matter if its through adobe updater or direct download this update fails and I decided to try 11.0.1 and it does the same so I guess PS CS4 11.0 is really not updatable to 11.0.2. and adobe suggests you to go cs5 to solve this problem. Except their updates fail to it looks like on this forum....
This is the problem details I get if it helps, because it does not leave a log for some reason.
Problem signature:
Problem Event Name:     APPCRASH
Application Name:     Setup.exe_Adobe Update Installer
Application Version:     2.1.60.0
Application Timestamp:     4a696125
Fault Module Name:     Setup.exe
Fault Module Version:     2.1.60.0
Fault Module Timestamp:     4a696125
Exception Code:     c0000005
Exception Offset:     000448e5
OS Version:     6.1.7601.2.1.0.768.3
Locale ID:     1033
Additional Information 1:     0a9e
Additional Information 2:     0a9e372d3b4ad19135b953a78882e789
Additional Information 3:     0a9e
Additional Information 4:     0a9e372d3b4ad19135b953a78882e789

I have tried run as admin, same error pops up, I tried giving myself ownership and special permissions and everything to the PS folder since the exe is read only thinking thats why it wont update... I ran the clean script and reinstalled and tried every trick known to man ( well this forum and several others found on google) and nothing seems to work, the 11.0.2 update itself crashes, so I am just going to assume its windows fault because it does seem to work for other people....but it does seem to crash on mac I have read too... I have UAC disabled and no AV installed trying this so I installed my trend micro AV and checked and the puter is virus free so am not sure why I can not use the update but here is the screen shots I get....
I run setup.exe as admin I get this
then when I click on next, with 2 seconds I get this popping up, count 1,2 bam their it is..
so no matter what I do I get this error on 11.0.1 or 11.0.2 updates in every mode or permissions you can give...

Updater fails on MacBookPro2,2, Snow Leopard 10.6.2

I had Acrobat Professional 8.1.6 working on my MacBookPro2,2, Snow Leopard 10.6.2. When I tried updating to 8.1.7 the updater failed, saying the installation has been changed. So I removed the installation and reinstalled from DVD. It started as 8.1.3 and successive updaters brought it up to 8.1.5. Now the updater to 8.1.6 fails with the same symptom. What shall I do?

I answered a Possible way in another thread that you posted to it involves the use of Target disk, you want to copy an application from one computer to another. Here they are in case you missed it.
   1. Turn off both Machines.
   2. Connect same Ethernet Cable to both machines.
   3. Start up the one that has the defective install in Target Disk Mode (hold down Command Key and press T while starting up) You should see a Y shape icon bouncing around the screen.
   4. Start up your Machine that has the good copy.
   5. When booted up if connection is right, you should see you computer with bad install shown as an addition Hard Drive.
   6. Double click on drive wit defective install go to applications folder and remove Acrobat to Trash (Do not empty at this time)
   7. now Drag copy from good machine to machine you removed acrobat from application. (you want to copy from good copy machine to the other).
   8. Now shut down Main machine Down First. Then one designated as Target Disk.
   9. now Disconnect ethernet cable.
10. Finally Restart Computer you copied to (one that was setup as Target Disk) normally.
11. Try Acrobat. You may have to remove preferences.
This applies to anything you need to copy from one machine to another.
PS: Originally Target disk was setup for ethernet to ethernet. There was talk of changing the specs so that it would work on USB2.

IOS8 update failed on my iPad Mini

I went to update my iPad mini to iOS8 from iOS7 and it powered off and then on the screen it came up with an iTunes logo and a wire meaning 'Connect to iTunes'. I did exactly what it told me and when I connected it, it said on iTunes that in order to get iOS8 i had to 'restore iPad'. I pressed this and then it was downloading for about 2 and a half hours when a message came up on the screen saying that i had to restore my iPad which i was already in the process of doing while it was plugged into my laptop.
My iPad has been like this since iOS8 came out and now it is stuck in recovery mode and every time i try to update it, it says that there is some kind of error.
So basically my iPad is stuck in recovery mode and i have no way of getting out of it. It is crucial that i use my iPad for College so i need it right away.
Can anyone help me please?
As soon as possible.
Thank You.

I have the same problem....after the update failed and left me with the cable to itunes screen it would NOT connect to the PC windows....I have tried all sorts of thngs....all combos of buttons and re power ups...and restart including holding both buttons down....the itunes on PC does not see the ipad at all....help?????

Acrobat 7 mandatory update failing with error 16820 and blocking the use of the program

Acrobat 7 mandatory update failing with error 16820 and blocking the use of the program

Sorry I can't get the screen print to upload
It says
Mandatory Update Available
A Mandatory version of this application is available for download. Application can't continue without installing this version.
Application:     Acrobat_com
Installed version: 2.0.0.0
Update Version : 2.3.0.0
Download now                    Quit
Release notes ( this is blank)
After selecting 'Download Now' I get the following message;
     Download failed
     There was an error downloading the update. Error #16820
     Close

Ipad update failed, says network connection failed or timed out, but have good coverage, tried several times

Been trying to update my ipad, and it keeps failing. the screen message I get says network failed ot timed out. Have no problem with internet coverage. Have tried on several occasions now.

Tap Settings > General > Reset > Reset Network Settings
Then restart the device.
Hold the On/Off Sleep/Wake button down until the red slider appears. Slide your finger across the slider to turn off iPhone. To turn iPhone back on, press and hold the On/Off Sleep/Wake button until the Apple logo appears.

"thinkpad video features" update fails and breaks machine. Anyone else got this?

The update is "thinkpad video features [...Quadro 1000M/2000M Optimus] for Windows 7 64" version 8.17.12.7593/8.15.10.2538.
It failed (gave an error message during install allong the lines of "update failed").
After this, I could not play any Direct-X games.
It also killed my color-munki profiler, so the colours are now completely off. I resinstalled the color-munki, reprofiled and im more or less back to where I started, but without the update.
Does anyone know one rolls back, or re-applies an upate? The failed update is no-longer appearing in the new upate list.
I was hoping the update would fix some of the external monitor problems, where it randomly will not expand to a second monitor, or the internal monitors reoslution gets stuck at some low res for no apparent reason, wakeup "loses" the monitor and switches back to internal only etc.

I've had that software installed for a long time (it was released back in November), and it is trouble-free.
If you have only recently attempted to install it, go to 'Control Panel', select 'System', at the upper left corner of the screen click on 'System Protection', then roll back the system state to a date and time prior to when you installed the driver.
In the future, I recommend that you use ONLY the Lenovo System Update application to fetch and install updates. You have created too many problems for yourself over the past couple of months trying to install drivers on your own.
Michael
What I'm running
W520 (4270 CTO), which replaced a W500 (4062-27U), which replaced a T42P, which replaced an A21P...

4S update from 7.1.2 to 8.1.2, says Software update failed

The device is confirmed it is a 4s, but we never upgraded to IOS 8 yet. I continue to get the Software Updated failed and the close and settings box comes up. Whichever you click on it goes back to the update screen. I am on very fast Wifi and the device is plugged in. Two days ago it said there was not enough space, so we deleted videos and now there is 5.7 GB available. I tried to update through ITunes, but the internet is too slow at home and it says 20 hours to update. We tried that twice and after 15 hours the "software update failed" notification comes up. Any ideas? I also turned off the phone and turned it back on.

I would reset the phone - no data loss involved - and try again
Restart or reset your iPhone, iPad, or iPod touch - Apple Support

Update failed when adding email

Hi please can someone help me. I have a curve 9320 and had my work emails and hot mail on my phone. My work emails stopped coming through and after attempting to fix the issue, I deleted my work emails from my phone. When I try to add the work email again it keeps saying update failed. The IT dept said I need to change the mail server settings. Does anyone know how to do this or even if this is what the issue is? Thanks

Hi and Welcome to the Community!
Is your work email account a BES/Enterprise account? Were you able to, with that, synchronize wirelessly calendar, contacts, tasks, and memos? If so, then your IT folks must resolve this BES activation issue.
If you only had email, then it likely was not BES, and instead acted just like any other "personal/internet" email account. But, I cannot quite tell what you are doing and what your IT department is recommending.
If you are using the on-device email wizard and providing only the email address and password yet it is still failing, then that could be what they are referring to. If the server does not respond with the proper server settings (e.g., port, server address, etc.), then the wizard will indeed fail.
To bypass the wizard and force the ability for you to provide those additional details, you need to provide a correct email address, but an intentionally incorrect password. When the screen repaints, the same fields will be visible, but an additional "tic box" for "I will provide these settings myself" (or something similar) will be added...tic that box and proceed, and you will be presented with a screen on which you can manually enter all of the necessary details.
Good luck!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

Acrobat XI 11.0.06 update fails during install

acrobat XI 11.0.06 update fails during install. Any advice or help? Here is the installer log contents:
Jan 17 00:32:34 fox.local installd[5955]: PackageKit: ----- Begin install -----
Jan 17 00:33:44 fox.local installd[5955]: PackageKit: Install Failed: Error Domain=PKInstallErrorDomain Code=112 "An error occurred while running scripts from the package “AcrobatUpd11006.pkg”." UserInfo=0x7fb9615c5160 {NSFilePath=./postinstall, NSURL=file://localhost/Volumes/AcrobatUpd11006/AcrobatUpd11006.pkg#payload.pkg, PKInstallPackageIdentifier=com.adobe.acrobat.a11.AcrobatUpd11006, NSLocalizedDescription=An error occurred while running scripts from the package “AcrobatUpd11006.pkg”.} {
        NSFilePath = "./postinstall";
        NSLocalizedDescription = "An error occurred while running scripts from the package \U201cAcrobatUpd11006.pkg\U201d.";
        NSURL = "file://localhost/Volumes/AcrobatUpd11006/AcrobatUpd11006.pkg#payload.pkg";
        PKInstallPackageIdentifier = "com.adobe.acrobat.a11.AcrobatUpd11006";
Jan 17 00:33:44 fox.local Installer[11306]: Install failed: The Installer encountered an error that caused the installation to fail. Contact the software manufacturer for assistance.
Jan 17 00:33:44 fox.local Installer[11306]: Displaying 'Install Failed' UI.
Jan 17 00:33:44 fox.local Installer[11306]: 'Install Failed' UI displayed message:'The Installer encountered an error that caused the installation to fail. Contact the software manufacturer for assistance.'.

You are right. There are a lot more self-support tools available in Windows
than in MacOS. All you ever get on a Mac is "That didn't work: -304998173".
Thanks for your insights.
Re: acrobat XI 11.0.06 update fails during install
created by Bill@VT <http://forums.adobe.com/people/Bill%40VT> in Acrobat
Installation & Update Issues - View the full discussion
<http://forums.adobe.com/message/6040206#6040206>
The upgrade is not the 11.0.06, but that is an update. The upgrade is what
you can purchase if you had a previous version of Acrobat (at least AA 9).
The upgrade is substantially less in price than the full product. With the
upgrade you also have to have the SN of the previous product available for
the install. That is why I asked about the upgrade. Once you install AA XI,
then going to 11.0.06 is a free update (updates are changes in the
sub-version and are done quarterly or when there is a critical security
issue). You can often fix installations by running a repair. In Windows
that is done either from Help>Repair or from the Control Panel. I do not
know the equivalent of the Control panel in the MAC. In any case I am glad
you got it fixed.
Please note that the Adobe Forums do not accept email attachments. If you
want to embed a screen image in your message please visit the thread in the
forum to embed the image at http://forums.adobe.com/message/6040206#6040206
Replies to this message go to everyone subscribed to this thread, not
directly to the person who posted the message. To post a reply, either reply
to this email or visit the message page:
http://forums.adobe.com/message/6040206#6040206 To unsubscribe from this
thread, please visit the message page at
http://forums.adobe.com/message/6040206#6040206. In the Actions box on the
right, click the Stop Email Notifications link. Start a new discussion in
Acrobat Installation & Update Issues at Adobe Community
<http://forums.adobe.com/choose-container!input.jspa?contentType=1&container
Type=14&container=4714> For more information about maintaining your forum
email notifications please go to
http://forums.adobe.com/thread/416458?tstart=0.

I'm trying to update my Photoshop CS5, but continue to receive the same problem every time. The application manager update dialogue box simply states "some updates failed to install." There's no specific error code, but a link to contact support for furth

I'm trying to update my Photoshop CS5, but continue to receive the same problem every time. The application manager update dialogue box simply states "some updates failed to install." There's no specific error code, but a link to contact support for further assistance. It doesn't take me to customer support, but does take me to a screen which states. "Error "This serial number is not for a qualifying product." I've checked my account and the product serial number is associated with my account., so I don't see any problem. I have not been able to find a resolution to this problem, so I hope that someone can point me in the right direction. Thank you!

update directly, Product updates

"update failed 6" screen

Similar Messages

Maybe you are looking for