Update G/L account in SC through Report

Hi All,
I created a report which basically does to update the G/L account of the Shopping cart which is in status awaiting approval.I created the report it updates the G/L account(ie When we change the G/L account of any product category in SPRO after that by executing the report will update the G/L in the database table).
The change of New G/L account is not get displayed in UI of the Shopping cart-But when i click the check button it does the validation for the Recently changed G/L account.
Could someone please advice me how to get reflect the change of G/L in Shopping cart UI?
Thanks,
SNMPKumar
Edited by: prem kumar on Jan 13, 2009 7:08 AM

Hi ,
Is it tiggering ur BADI implementation or not ? If yes then whats ur logic to update ?
regards
Prabhu

Similar Messages

EIS drill through report build

Hi, I want to create multiple drill through reports using EIS. But looks like I need to create all the required reports before I build and load the cube. Once I have built the cube using EIS, I cannot go in the metaoutline and add new drill through reports. Is this true, or am I missing something? So whenever I need to add new reports for drill through, do I need to build the cube all over again? Thanks RMP

No, you can open your metaoutline and build your drill through report and then run an update that just refreshes the drill through reports without having to rebuild or reload the cube.

Want to add and remove GL account in report through report painter

Hi,
Thanks in advance,
1.I want to add new GL account in IS01 report i.e. Income Statement. I am trying to add through report painter but could not able to do it.
2.Also i want to delete existing GL account from report through report painter.
Any body pls suggest the steps to add and remove GL account through report painter because this report is under report painter.
Thanks,
KMR

the account is probably in account group or set. Look for that one in report painter and then go to the set or account group and remove/add the account.

Updation of custom BUPA fields(EEWB) through a report program

Hello everybody,
I have to change the entries made in BUPA table for a custom field ZZPAYMENT through report programming.
I tried using the function modules in following sequence :-
1)BUP_MEMORY_BUT000_GET
2)'BUPA_CENTRAL_CI_CHANGE
3)BAPI_TRANSACTION_COMMIT
But the first FM "BUP_MEMORY_BUT000_GET" is throwing an error of not found .Here in this fm ,i m passing buisness partner i as an import parameter. You all are welcome to suggest me some other way for updating these custom fields

Hi Prashant,
BUP_MEMORY_BUT000_GET is get the value from memory. Ths function module will not work correctly in Z program.
Directly get BP GUID from BUT000 table and update it, if you are trying to achieve the functionality with Z program,
//pbp

HT4864 When trying to update my Mail Account Mailbox Behaviours settings, when I try to close the settings pane the following messages occur: Invalid Incoming Mail Server The "Incoming Mail Server" field cannot be empty. The incoming mail server box has p

When trying to update my Mail Account Mailbox Behaviours settings, after making the changes when I try to close the settings pane the following messages occur: Invalid Incoming Mail Server The “Incoming Mail Server” field cannot be empty. The incoming mail server box has in light grey colour: p02-imap.mail.me.com in it and I cannot edit its content. Any ideas what is going on and how to fix it?

Hi all,
Mattreichenbach is probably on the right track here with a reset of settings. I think I've determined the issue has to do with cached account information and inconsistencies for the account name. This seems to crop up when I've changed my password and it hasn't propagated fully to all the servers, devices, certificates, etc.
Hopefully many here are on their way to restoration of service by now but it's clear that a lot of people are having the same issues. Very frustrating and definitely something Apple needs to resolve: incoming mail server field grayed out, incorrect autopopulation of different fields, other unanticipated behaviors. If you're still having issues, though, here's what worked for me...
First, head to the iCloud preferences pane in System Configuration and choose "Sign Out". When I did this it prompted me with a number of "are you sure" type questions about retaining information on my local machine. I chose to delete/remove the info each time simply because it should all be restored by the cloud and I didn't want to risk a massive duplication of my data... I will say, I'm back up and running with no issues so I suspect you can make the same delete/remove choices... But use your own judgment. I don't want you to lose any data (ie.. please use care as you do this because I cannot bear the thought of causing anyone to experience the pain of data loss).
Once you've signed out of iCloud, restart your system. When you get back in, head to the Mail, Contacts and Calendars section of your System Preferences and add your account back by choosing the brushed aluminum "iCloud" button. When it asks for your account name, use your @iCloud.com email address. I am all but certain my issue had started because one of my devices (iPhone or whatever) had been set up with an email alias specified instead of my @iCloud.com address.
Apple, if you're reading through any of these issues (there are TONS of users having this same problem). Take note, that your icloud service somewhat frequently is not responding and yet tells the user that the password is wrong and this prompts people to be changing their passwords unnecessarily. This has happened to me on numerous occasions. Also, I noticed that last week's outage corresponded to a VERY similar outage exactly one year ago to the day. Sounds like planned maintenance to me and I think you could do a better job notifying folks so we're not wasting HUGE amounts of time troubleshooting a problem that we have no hope of fixing.
Hope that helps some of you!
Terry Mullane
Washington, DC

Can we create purchase order through report programming?

hi experts.....
can we create purchase order through report programming?If yes plz give me the thread details?

Hi,
Use this code in a program by using a BAPI function module
Anothe rway is using classical/ALV report using call transaction from a report for changing the PO
loop at i_header.
    header-ref_1         = i_header-legacy.
    headerx-ref_1        = c_x.
    header-doc_type      = i_header-bsart.
    headerx-doc_type     = c_x.
    header-comp_code     = i_header-bukrs.
    headerx-comp_code    = c_x.
    header-purch_org     = i_header-ekorg.
    headerx-purch_org    = c_x.
    header-pur_group     = i_header-ekgrp.
    headerx-pur_group    = c_x.
    header-vendor        = i_header-lifnr.
    headerx-vendor       = c_x.
    concatenate i_header-bedat+4(4)
                i_header-bedat+0(2)
                i_header-bedat+2(2)
                into header-doc_date.
    headerx-doc_date     = c_x.
    header-created_by    = i_header-ernam.
    headerx-created_by   = c_x.
    header-currency      = i_header-waers.
    headerx-currency     = c_x.
    concatenate i_header-kdatb+4(4)
                i_header-kdatb+0(2)
                i_header-kdatb+2(2)
                into header-vper_start.
    headerx-vper_start   = c_x.
    loop at i_items where legacy = i_header-legacy.
      item-po_item            = i_items-ebelp.
      itemx-po_item           = i_items-ebelp.
      itemx-po_itemx          = c_x.
      if i_header-bsart = 'NB'.
        item-material            = i_items-ematn.
        itemx-material           = c_x.
        schedule-quantity        = i_items-menge * 1000.
        schedulex-quantity       = c_x.
      else.
        item-short_text          = i_items-ematn.
        itemx-short_text         = c_x.
        item-matl_group          = '1000'.
        itemx-matl_group         = c_x.
        schedule-quantity        = '1'.
        schedulex-quantity       = c_x.
      endif.
      item-plant               = i_items-werks.
      itemx-plant              = c_x.
      schedule-po_item         = i_items-ebelp.
      schedule-sched_line      = '1'.
      schedulex-po_item        = i_items-ebelp.
      schedulex-sched_line     = '1'.
      schedulex-po_itemx       = c_x.
      schedulex-sched_linex    = c_x.
      concatenate i_items-eildt+0(2)
                   i_items-eildt+2(2)
                   i_items-eildt+4(4)
                   into schedule-delivery_date.
      schedulex-delivery_date = c_x.
      item-price_unit          = i_items-peinh * 100.
      itemx-price_unit         = c_x.
      item-tax_code            = i_items-mwskz.
      itemx-tax_code           = c_x.
      item-shipping            = i_items-evers.
      itemx-shipping           = c_x.
      account-po_item          = i_items-ebelp.
      accountx-po_item         = i_items-ebelp.
      accountx-po_itemx        = c_x.
      if i_header-bsart = 'FO'.
        item-pckg_no = sy-tabix.
        itemx-pckg_no = 'X'.
        limits-pckg_no        = sy-tabix.
        limits-limit          = i_items-overalllimit.
        limits-exp_value      = i_items-expectedoverall.
        posrvaccessvalues-pckg_no    = sy-tabix.
        posrvaccessvalues-line_no    = '0'.
        posrvaccessvalues-serno_line = '00'.
        posrvaccessvalues-percentage = '100.0'.
        posrvaccessvalues-serial_no = '01'.
        account-serial_no     = '1'.
        accountx-serial_no    = '1'.
        accountx-serial_nox   = c_x.
        account-quantity = '1'.
        accountx-quantity = c_x.
        call function 'CONVERSION_EXIT_ALPHA_INPUT'
          exporting
            input = i_items-kostl
          importing
            output = account-costcenter.
        accountx-costcenter   = c_x.
        call function 'CONVERSION_EXIT_ALPHA_INPUT'
          exporting
            input = i_items-sakto
          importing
            output = account-gl_account.
        accountx-gl_account   = c_x.
        item-acctasscat       = i_items-knttp.
        itemx-acctasscat      = c_x.
        item-item_cat         = i_items-epstp.
        itemx-item_cat        = c_x.
      endif.
      append:item,itemx,schedule,schedulex,account,accountx,limits,posrvaccessvalues.
      clear :item,itemx,schedule,schedulex,account,accountx,limits,posrvaccessvalues.
    endloop.
    call function 'BAPI_PO_CREATE1'
      exporting
        poheader                     = header
        poheaderx                    = headerx
*   POADDRVENDOR                 =
*   TESTRUN                      =
*   MEMORY_UNCOMPLETE            =
*   MEMORY_COMPLETE              =
*   POEXPIMPHEADER               =
*   POEXPIMPHEADERX              =
*   VERSIONS                     =
*   NO_MESSAGING                 =
*   NO_MESSAGE_REQ               =
*   NO_AUTHORITY                 =
*   NO_PRICE_FROM_PO             =
        importing
        exppurchaseorder             = ponumber
*   EXPHEADER                    =
*   EXPPOEXPIMPHEADER            =
        tables
        return                       = return
        poitem                       = item
        poitemx                      = itemx
*   POADDRDELIVERY               =
        poschedule                   = schedule
        poschedulex                  = schedulex
        poaccount                    = account
*   POACCOUNTPROFITSEGMENT       =
        poaccountx                   = accountx
*   POCONDHEADER                 =
*   POCONDHEADERX                =
*   POCOND                       =
*   POCONDX                      =
        polimits                     = limits
*   POCONTRACTLIMITS             =
*   POSERVICES                   =
   posrvaccessvalues            = posrvaccessvalues.
*   POSERVICESTEXT               =
*   EXTENSIONIN                  =
*   EXTENSIONOUT                 =
*   POEXPIMPITEM                 =
*   POEXPIMPITEMX                =
*   POTEXTHEADER                 =
*   POTEXTITEM                   =
*   ALLVERSIONS                  =
*   POPARTNER                    =
    if ponumber eq space.
      loop at return where type = 'E'.
        clear buffer.
        move-corresponding return to e_return.
        concatenate i_header-legacy e_return into buffer.
        transfer buffer to p2_file.
      endloop.
      move-corresponding i_header to i_eheader.
      transfer i_eheader to p3_file.
      loop at i_items where legacy = i_header-legacy.
        move-corresponding i_items to i_eitems.
        transfer i_eitems to p4_file.
      endloop.
    else.
      commit work and wait.
    endif.
    clear:ponumber,header,headerx,item,itemx,account,accountx,limits,return,schedule,schedulex,posrvaccessvalues.
    refresh:item,itemx,account,accountx,limits,return,schedule,schedulex,posrvaccessvalues.
endloop.
close dataset p2_file.
close dataset p3_file.
close dataset p4_file.
Regards
Krishna

How do I update the Bank Account to pay my iCloud Storage plan

HOw ow to update the Bank account to pay my iCloud Storage Plan

Hey,
Hopefully this can help you:
iOS:
Go to Settings > iTunes & App Store, tap your Apple ID, and tap View Apple ID. Then tap Payment Information, and update your account. You might need to enter your Apple ID password.
n
If you are not on a device running iOS check out this link which guides you through updating your iCloud payment information for each apple product.
iCloud storage upgrades and downgrades - Apple Support

Hi there, our mac has an IOS version 10.5.8 and i need to update it to 10.6.8 in order to update our itunes account....when i start softwear update it tells me that nothing needs to be updated and i also do not have access to the mac app store...How can i

Hi there, our mac has an IOS version 10.5.8 and i need to update it to 10.6.8 in order to update our itunes account....when i start softwear update it tells me that nothing needs to be updated and i also do not have access to the mac app store...How can i update my ios? thanks Matthijs

Get more information about your computer. Go to the Apple in the upper left corner of any window, then "About This Mac". Write down what it says about "version"and report that here. Now continue to "More Info..." Copy and paste the information here, but omit the serial number and Hardware UUID (if present).
If you have a PPC Mac you cannot sync your idevice without a newer computer. See the end of this post for options.
If it says you have an Intel Mac you can upgrade to Snow Leopard, but check system requirements first:
Snow Leopard 10.6 Technical Requirements - http://support.apple.com/kb/SP575
You can buy Snow Leopard at:
Snow Leopard disc source - http://store.apple.com/us/product/MC573Z/A/mac-os-x-106-snow-leopard
After installing run the updater to 10.6.8, then upgrade iTunes.
Jan. 2014 post by Kappy on doing all this: https://discussions.apple.com/message/24599931
Options if you cannot upgrade: iTunes Store purchases can already be downloaded directly. Use iTunes Match to put non-Store music in iCloud, then download to your device from there. Backup your device directly to iCloud over a wireless connection. Photos can be downloaded from the Camera Roll using iPhoto or Image Capture.

Why won't my Mac with Mt Lion update my calendar and address book through iCloud

Why won't my Mac w Mt Lion update mt Calendar and Address book through the Icloud?

Are you really still running Snow Leopard (10.6.8) as shown in your profile? If so, that's why. Full use of iCloud needs at least Lion 10.7.2 or Mountain Lion.
If you have upgraded to Mountain Lion and forgot to update your profile, here are some things to check:
Is it on a network?
Is it signed into iCloud? The same iCloud Account?
Are Contacts and "Calendars & Reminders" checked in the iCloud and same account's "Mail, Contacts & Calendars" panels of System Preferences?
Are you looking at the correct accounts in Calendar and Contacts?

Passing different (multi-) values for parameters to drill-through report, based on clicked subtotal in main report

In Report Builder 3.0, I have made a main report in which the user can filter the underlying dataset using three parameters (all multi-value). The report shows totals grouped by these three parameters, as well as a grand total. What I want is to click
on a total, which then opens the drill-through report for the corresponding records. I have achieved this for the grand total; the action in the corresponding text box passes all selected values of the parameters to the drill-through report.
What I cannot figure out is how to make this work right when clicking on a subtotal. When I use the same expression as for the grand total, the same values for the parameters are passed, instead of the subset that apply to the corresponding text box in the
main report. I expected this to work, because Report Builder /does/ correctly calculate the SUMs for the different levels, even though the expressions are the same.
My question is: how do I pass different drill-through (multi-) values for parameters, corresponding to the respective subtotals in the main report?
(FYI: I am using Microsoft SQL Server 2008 R2 and Report Builder 3.0 .)

Hello Katherine,
Thanks once more for your quick reply.
I was aware of the textbox action "Go to report", and how to pass parameters in general. My question concerned how to determine the scope of the passed multi-value parameters (to the values that apply to the respective group/subtotal). The article you linked
to is informative, but not a solution to my problem.
A colleague of mine came up with a pragmatic solution: instead of trying to determine the scope of the parameter values, now I "look to the left in the results table". The two screenshots below should illustrate this. (Screenshots are in Dutch. Specific information
is pixelated.)
Unfortunately, I am not able to post images. Once my account is verified, I will edit them in. For now, I hope the text speaks for itself enough.
[Screenshot: Drill-through parameters - 01: Report Builder tablix with subtotals]
[Screenshot: Drill-through parameters - 02: Textbox properties (selected in screenshot 01) - Action - Go to report]
The first screenshot shows the tablix in the Report Builder. The second screenshot shows the properties of the textbox selected in the first.
Notice that I do not pass parameters for the first two columns, but the actual values. I only pass the parameter (containing /all/ user-selected values) for the third column. In the textbox below the selected one, I pass the actual values for the first column,
and parameters for the last two. In the textbox above the selected one, I pass the actual values for all three columns.
The only (cosmetic) flaw this approach has is that in the drill-through report, the list of selected parameters might show values that do not occur in the (corresponding part of the) results, and only for those parameters for which the main report passes (all
user-selected) parameter values, and not the actual values in the results. The results are correct, though.
If there is a way to directly determine the scope of multi-value parameters for passing to a drill-through report, I would still like know. But for now, this seems to work.

Need to Update SELECTION TEXT and text symbols for report J_1IEWT_CERT.

Hello Experts,
My requirement is need to "Update SELECTION TEXT and text symbols for report J_1IEWT_CERT".
1. As I want to change text sysmbols for 006 to "Run in preview mode". Currently it showing "Type of output". Issue I am facing here is that whenever I deleting aur changing the same it throws an error : "Text symbol 006 is an original text and cannot b
deleted or renamed". How can I do the same.
2. Secondly I have to add two selection text also i.e. ZFATHER and PREV . And delete two selection text i.e. P_PDF and
P_SCRIPT. In this Tab there is only a Icon of deleting not an Addition button .So How can I add two more selection text.
Above are Manual Activities which is written in note 1486147. We already taken an acess key and it shows in editable mode but
not able to add/deletin/modify selection text and text symbols.
Please provide the solution as it is critical requirement.
Reagrds,
Supriya Bhatt.

Hi Vishal Saxena,
Just go through the screens and do it .
[<li> Link1|http://4.bp.blogspot.com/_O5f8iAlgdNQ/SjoVqL9rnvI/AAAAAAAAEs4/fPG7IG9yGK4/s1600-h/3-716953.JPG]
[<li> Link2|http://1.bp.blogspot.com/_O5f8iAlgdNQ/SjoVp3d9uEI/AAAAAAAAEso/ZxfkeNAiOZQ/s1600-h/1-715669.JPG]
[<li> Link3|http://2.bp.blogspot.com/_O5f8iAlgdNQ/SjoVqIbpNpI/AAAAAAAAEsw/2ntYgX-i1Dc/s1600-h/2-716353.JPG]
Thanks
Venkat.O

EIS 6.5.1 Drill through Reports - Urgent

Hi all, Is there any limitaion on number of fields in the EIS drill through reports. It seems it accepts only 10 columns, rest of the column data is not properly displayed. Please update me on this.thanksSels

We ran into this problem a while ago. It seems that after 10 columns, formatting get really odd. We submited it as a bug a number of months ago.Glenn S.Narratus [email protected]

I cannot update my itunes account. when I try to edit information I am getting an error message

cannot update my itunes account. when I try to edit information I am getting an error message

To everyone that is having this problem:
I just ended a 2 hour session with Apple Tech Support. We had to take it to a level 2 support person, but finally got it running. Here's what she had me do. Go to Control Panel, Add/Remove Programs. Uninstall ALL Apple products on the Computer. This inccluded Apple Mobile Device Itunes, Bonjour and Quicktime. I doubt if we would have had to but she had me download a fresh copy of iTunessetup.exe and run it. iTunes came up and ran on version 11.1.4. Then I reinstalled Quicktime.
It is my personal opinion that there is a flaw in version 11.1.4. You shouldn't have to go through all of these hoops just to update a single application that was working fine proir to the update attempt.
That's what worked for me. Hope this helps you. Any questions, get back to me.
Good Luck.

Call BDC through report.

Hi experts,
        I want to call BDC for MIGO through report . I had collected required the data in internal table now i want to call the BDC by using call transaction method and update the data using internal table. I used the SUBMIT command to call the bdc but default selection screen comes.
How to suppress the selection screen of bdc ?

Hi Abhishek ingole,
Use BAPIs instead of BDC for MIGO...
BAPI_PO_CREATE --> To create Purchase Order
BAPI_PO_CHANGE --> To change Purchase Order
BAPI_PO_GETDETAIL --> Todisplay Purchase Order
BAPI_GOODSMVT_CREATE
Refer below code and modify it according to your req.
* Structures for BAPI
DATA: GM_HEADER TYPE BAPI2017_GM_HEAD_01.
DATA: GM_CODE    TYPE BAPI2017_GM_CODE.
DATA: GM_HEADRET TYPE BAPI2017_GM_HEAD_RET.
DATA: GM_ITEM    TYPE TABLE OF
                 BAPI2017_GM_ITEM_CREATE WITH HEADER LINE.
DATA: GM_RETURN TYPE BAPIRET2 OCCURS 0 WITH HEADER LINE.
DATA: GM_RETMTD TYPE BAPI2017_GM_HEAD_RET-MAT_DOC.
CLEAR: GM_RETURN, GM_RETMTD. REFRESH GM_RETURN.
* Setup BAPI header data.
GM_HEADER-PSTNG_DATE = SY-DATUM.
GM_HEADER-DOC_DATE   = SY-DATUM.
GM_CODE-GM_CODE      = '04'.                                " MB1A
* Write 971 movement to table
CLEAR GM_ITEM.
MOVE '412'                 TO GM_ITEM-MOVE_TYPE     .
MOVE 'Q'                 TO GM_ITEM-SPEC_STOCK.
MOVE '3800533484' TO GM_ITEM-MATERIAL.
MOVE '1'     TO GM_ITEM-ENTRY_QNT.
*MOVE 'PC'    TO GM_ITEM-ENTRY_UOM.
MOVE '1060' TO GM_ITEM-PLANT.
MOVE '0007' TO GM_ITEM-STGE_LOC.
*MOVE '0901'   TO GM_ITEM-MOVE_REAS.
MOVE 'P203601001' TO GM_ITEM-WBS_ELEM.
MOVE 'P203601001' TO GM_ITEM-VAL_WBS_ELEM.
APPEND GM_ITEM.
* Call goods movement BAPI
CALL FUNCTION 'BAPI_GOODSMVT_CREATE'
     EXPORTING
          GOODSMVT_HEADER = GM_HEADER
          GOODSMVT_CODE    = GM_CODE
     IMPORTING
          GOODSMVT_HEADRET = GM_HEADRET
          MATERIALDOCUMENT = GM_RETMTD
     TABLES
          GOODSMVT_ITEM    = GM_ITEM
          RETURN           = GM_RETURN.
IF NOT GM_RETMTD IS INITIAL.
COMMIT WORK AND WAIT.
CALL FUNCTION 'DEQUEUE_ALL'.
ELSE.
COMMIT WORK AND WAIT.
CALL FUNCTION 'DEQUEUE_ALL'.
ENDIF.
WRITE:/ GM_RETMTD.
LOOP AT GM_RETURN.
WRITE:/ GM_RETURN.
ENDLOOP.
Hope it will solve your problem..
Thanks & Regards
ilesh 24x7

Please update the functional specifications for Vendor Balance Report

Dear All,
Please update the functional specifications for Vendor Balance Report with
proper descriptions.
Please include
1. How your selection screen should look like..
2. Output format ( in an excel sheet)
3. Logic for every field in the output format (viz. .. how do link the
vendors from the selection screen to the BKPf and BSEG tables, how do you
find open and closed items in BSEG , etc.)
Please avoid statements like 'The total value of all the break-up should
tally with the balance as shown in FBL1N for a given vendor for the given
day.'
You need to give the logic for the FBL1N, in that case.
Regards
Rama Mohan

Hello again,
Regarding having them update the specs, one can dream. Dreams are free. LOL. Hopefully the memory makers will update their specs as more makers start supporting a large memory configuration.
The 4GB sticks I am using are http://shop.kingston.com/partsinfo.asp?ktcpartno=KTL-TP667/4G
I did not do an extended test of the sticks in my MBP. Their home is in the ThinkPad I have because it is running Windows Server 2008 with Hyper-V.
As you can see from the link above, these little suckers are pricey. But consider the price of 2GB SoDIMMs were $950 when they entered the market a couple of years ago. The price will drop.
I asked the Kingston rep that sent these to me if online sites like newegg.com would have them soon. She indicated no, but the corporate buying sites like CDW and Zone would. So check around. They just started shipped a couple of weeks ago so be patient.
If you have any other questions, please stop by http://blogs.technet.com/keithcombs/archive/2008/07/05/testing-my-apple-macbook- pro-with-8gb-of-ram.aspx and ask there. I'll see them much more quickly.
Cheers,
Keith Combs
Microsoft

Update G/L account in SC through Report

Similar Messages

Maybe you are looking for