Update Manager Setup Wizard

Dear all,
we have installed the Update Manager Client S/W 1.0.10 (ie Patch 121119-16)
on our x86 system running Solaris 10 5/08.
From the Sun Java Desktop System Launch menu, we choose Applications/ Utilities/Update Manager
to start the tool. But after the authentication process (root/PW) the Update Manager is saying:
Setup Wizard Error - Setup Wizard is not installed
How can this be installed?
THX, Rainer

I, too, am having this problem with a recently installed instance of Solaris 10 10/09. I recently installed the system and custom removed a few packages from the Entire Group. However, it looks like we removed too many packages and it broke the updatemanager. I've attempted to install the SUNWccc* and ccf* packages to no avail. It'd be nice to know which particular package that wizard belongs to.

Similar Messages

  • Sun Update manager Registration Wizard - "LOG FILE"

    hi dudes
    we have a problem with the sun update manager registration wizard.
    "Exception in web service communication"
    i think we have a problem with the proxy access.
    is there a special log file, where we can found more information about
    the system registration process?
    thanks a lot for your support
    regards

    Hello,
    The "Exception in Web Service communication" error only occurs during the registration. There has been a bug raised for this - 6348265.
    The only workaround that we have available is to bypass various parts of your network and security infrstructure from the client to the internet during the registration process, e.g.
    LAN(client machine) - Proxy (Squid) - Firewall to DMZ - Webwasher (AntiVirus)
    - Firewall to Internet
    Bypassing proxy, antivirus software or firewall.
    As this issue only affect the registration process these can be re-enable after registration.
    Regards,

  • Virtual Machine Manager Setup Wizard is hanging

    Appears to be 4/5 of the way done (4 of 5 bars are blue). Installing features. Green bar continues to zip across over and over.
    Installing VMM Console. Been sitting like this for some time now.

    Hi
    are there any errors logged at the time of the install in event viewer?
    Did you come right?
    Hope this helps. Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread.

  • Installing Update Manager while using a vCenter Appliance

    I created a lab environment with 2 ESXi hosts (5.5.0) and a vCenter appliance (5.5.0).
    I need to perform some tests using Update Manager but I was unable to locate the procedure to install it.
    I understood that UM cannot be installed on the vCente Appliance.
    I can use a Windows Server 2008 R2 host to host it, but I can't find the procedure...
    Can anybody please point to a detailed documentation?
    Regards
    marius

    The procedure is the same, take a look: vSphere Update Manager (VUM) (Part 2) - Installation
    You will need just provide IP Address (or FQDN), port, username and password to connect to your vCSA when asked by Update Manager installation wizard (Figure #3 on link that I posted above).

  • No hosts found in SMD Managed Sytem Setup Wizard

    Dear Experts,
    I connected a Portal system to SMD server. I manaualy defined the system in SMSY instead of SLD.
    When I went to the SMD Managed System Setup Wizard, it reported"No instances or
    servers are defined for this system. Please check its definition in SMSY before proceeding to setup".
    I've carefully checked all system definition in SMSY. I wonder if others have come across the similiar
    problem, sincerely hoping for your advice.
    Best Regards,
    Karl

    Hi, David,
    I just can't find my installed agents in SLD view. But under Agent administration Agent Tab I can see them with status green. I installed agent without registration to SLD, but user directly P4 connection.
    I tried go SMD view, I can see my agents there , and it has a column SLD settings, push SLD settings,
    I clicked to push SLD settings, but an error occured:(Failed to send SLD settings to remote agent: sapeppap01 (detail: Failed to save new SLD settings; nested exception is: java.lang.StringIndexOutOfBoundsException: String index out of range: -1).
    Best Regards,
    Karl

  • Diagnostics System: Managed System Setup Wizard

    Hi there!
    I have installed the Host Agent and Diagnostic Agent on a test-system successfully. Now I have tried to start the Setup Wizard for managed systems (http://<hostname>:port/smd). The system collection was no problem, but the Setup Parameters. If I choose the directories of the "System Install Path",  the "Instance Path" and also the "Instance Number" the following Message appears: "No Diagnostics Agent available at this time Please install or start an SMD Agent for <hostname>".
    I don't know the reason, because the Diagnostic Agent is running and I think my parameters will be okay:
    System Install Path: usr/sap/DAA/
    Instance Path: usr/sap/DAA/SMDA97/
    Instance Numer: 97
    Is there a failure?
    I look forward to your reply!
    Best reagrds,
    Andreas

    Hi there!
    I have found an interesting warning:
    Managing System '<hostname>' is  registered in the SLD but the CIM declaration is not valid, the agents cannot be attached correctly. check SLD Managing system declaration. (detail: CIM_ERR_FAILED: Cannot find SAP_BCCentralServiceInstance of SAP_J2EEEngineCluster SAP_J2EEEngineCluster.CreationClassName="SAP_J2EEEngineCluster",Name="<hostname>" in SLD LR)
    I think it is the reason for my problems .. Can anybody help me?
    Best regards,
    Andreas

  • Managed System Setup Wizard Status " ? " SPS 15

    Dear All,
    I have a problem with my SMD.
    I have already upgrade the Solution Manager 4.0 from SPS 13 to SPS 15.
    I want to setup E2E Root Cause Analysis for CRM system.
    So I configured SMSY since I didn't configure SLD yet.
    I've already installed SMD Agent in managed system successfully also.
    When I run the Diagnostics Setup -> Managed System -> Setup WIzard,
    in the Setup Parameter Step , it said that " No SMD Agent is currently available (ie not assigned). Please install an agent for jktgrhxsapc1 or unassign an existing agent in Agent Administration  Why is that so ?
    In the Agent Administration ( DIagnostics Administration -> Managed SYstem -> Agent Administration) found that the agent is online.
    Second, In managed system setup wizard - System Selection Step, there's an unknown system with SID '???' and  the status said that 'Some SMD Agent Runnning on host not belonging any successfully published solution' . Where can we find the log if we have an error when publishing solution ?
    Thanks in advance,
    Adhi

    Hi Labinot,
    I have checked the agent log looks like no error,
    id loaded TTL refType
    applications:com.sap.smd.agent.application.global.configuration true 0 strong
    applications:com.sap.smd.agent.application.tracing true 0 strong
    applications:com.sap.smd.agent.application.wilyhost true 0 strong
    applications:com.sap.smd.agent.application.flightrecorderdumpscan true 0 strong
    applications:com.sap.smd.agent.application.telnet true 0 strong
    applications:com.sap.smd.agent.application.filesystem true 0 strong
    applications:com.sap.smd.agent.application.logviewer true 0 strong
    applications:com.sap.smd.agent.application.remotesetup true 0 strong
    applications:com.sap.smd.agent.application.database true 0 strong
    applications:com.sap.smd.agent.application.datacollector true 0 strong
    applications:com.sap.smd.agent.application.runtime true 0 strong
    applications:com.sap.smd.agent.application.connectors true 0 strong
    applications:com.sap.smd.agent.application.wily true 0 strong
    Apr 10, 2008 7:13:07 PM [Thread[SMDAgent connection thread,5,main]] Info       [p4://jktgrhxsapl1:50604] Registration done.
    Apr 10, 2008 7:13:07 PM [Thread[SMDAgent connection thread,5,main]] Info       [p4://jktgrhxsapl1:50604] Agent ready.
    Apr 10, 2008 7:27:25 PM [Thread[Thread-37,5,main]] Info       Returned service object :com.sap.smd.core.runtime.agent.LogService@14cee41f
    Apr 10, 2008 7:27:26 PM [Thread[Thread-34,5,main]] Info       Returned service object :com.sap.smd.core.runtime.agent.LogService@14cee41f
    any other idea?
    -Adhi-

  • Managed System Setup Wizard: which J2EE-Admin-User

    Hello,
    I'm running the managed system setup wizard in the diagnostic.
    In the setup of the parameters, I have to enter the J2EE-Admin-User. But which one?
    I tried:
    SMD_AGT_ADM (Dialog user with admin roles on both stacks)
    SMD_AGT_ADM (Communications user with admin roles on both stacks)
    The user was created by me before the setup. But regardless of the user settings, I get the following error:
    A logon failure occured on frces4139/SM7/00 (192.168.1.139).
    System Setup aborted, to prevent locking the User Account.
    Please check error details, specify a valid User/Password if necessary, and start Setup again
    Any ideas? Which user or user settings have to be maintained?
    Thanks,
    Jan

    Hello,
    I think the user you need to enter here is the j2ee_admin user or another user with SAP_J2EE_ADMIN role.
    Regards,
    Benjamin Rouger

  • Error While running Setup Wizard in SolMan Managed Systems

    Hello,
    I am getting the error listed below while I am trying to setup an Agent in SolMan Diag.
    While I am running Setup Wizard, I am giving the message server port (50100) the same as I am getting from the systeminfo page: http://<My Server Name>:50100/sap/monitoring/SystemInfo.
    When I change this port with 50104 which is my P4 port, It takes it and then gives me a message that "P4 port is unknown".
    Any input?
    Regards,
    Ray
    Failure with Message Server
    An error occured while communicating with Message Server <My Server Name>:50100 through the host <My Server Name>: Error to retrieve the process from Message Server (detail: com.sap.bc.proj.jst
    artup.impl.JStartupClusterControlExceptionImpl: The message server did not respond within 60 sec. Please check if the message server is running and if the socket connection has been established.); nes
    ted exception is:
    com.sap.bc.proj.jstartup.impl.JStartupClusterControlExceptionImpl: The message server did not respond within 60 sec. Please check if the message server is running and if the socket connection has bee
    n established.(cause=com.sap.bc.proj.jstartup.impl.JStartupClusterControlExceptionImpl The message server did not respond within 60 sec. Please check if the message server is running and if the socket
    connection has been established.)
    Please check Message Server host/port, or enter the P4 ports in cluster table.

    Hi furious
    I have the same error , and finally I am find the solution, this error due to the enterprise admin permission, so go to main configuration tree (as shown on screenshot) click properties, click enterprise admin, click advance, again click enterprise
    admin, click edit and select "this object and all descendant object" on Applies to option (as per screenshot) and select full control
    after that you prepare your organization and It will works
    cheers....................

  • Microsoft Exchange Server 2013 Cumulative Update 7 Setup - Active Directory Topology service on server 'TopologyClientTcpEndpoint (localhost)' returned an error - Set-SharedConfigDC

    What am I trying to do?
    I have tried installing Microsoft Exchange Server 2013 Cumulative Update 7 Setup on a fresh install of Windows Server 2012 R2 but it gets stuck when running the setup exe on Step 8 of 14 “Mailbox Transport Service” I have included full
    error logs at the bottom of the page but the basics are in order it will throw which loop around are:
    [01/20/2015 17:13:20.0084] [2] Beginning processing Set-SharedConfigDC
    [01/20/2015 17:13:20.0178] [2] The call to Microsoft Exchange Active Directory Topology service on server 'TopologyClientTcpEndpoint (localhost)' returned an error. Error details No Minimal Required Number of Suitable Directory Servers
    Found in Forest mydomain.com Site Default-First-Site and connected Sites..
    [01/20/2015 17:13:20.0178] [2] No Minimal Required Number of Suitable Directory Servers Found in Forest mydomain.com Site Default-First-Site and connected Sites.
    Exchange is currently running in the envirmonet on 2010 Sp3 I am installing 2013 CU7 fresh so I can migrate the databases over.
    What am I running?
    2 X DC on domain and forest functional level 2008R2 both writable
    1 X fresh install of Windows 2012 R2 which is domain joined
    What have I tried?
    Checked Ipv6 is enabled on all DC NICS and Existing Exchange Servers
    Rebooted every server
    Run setup as Administrator
    My account is part of the domain Enterprise Admin group
    Tried adding "Exchange Server" or "Exchange Enterprise Servers" to the group policy and doing the relevant gpupdate /force and reboot :
    Computer Configuration Windows Settings
    Security Settings + Local Policies
    User Rights Assignment Mange auditing and security log
    Turned off firewall on DC and Exchange Server even stopped the service
    Turned off all AV on the DC and Exchange Server
    Checked I could telnet to global catalog servers on port 3268 which I can
    Checked the global catalog records existed in DNS which they all do
    Done the obvious ping tests all round which confirms connectivity
    Schema has been prepared using appropriate commands before running the setup exe
    setup.exe /PrepareSchema /IacceptExchangeServerLicenseTerms
    Making sure the following path has full permissions:
    EXCHANGE14:\Current\Release\Shared\Datacenter\Setup
    Restarted Microsoft Exchange Active Directory Topology service
    DcDiag all looks good
    What have I noticed that is suspicious?
    Microsoft Exchange Transport service will not start even though both of its dependences services have started:
    Microsoft Filtering Management Service
    Microsoft Exchange Active Directory Topology Service
    It will eventually error with
    “Windows could not start the Microsoft Exchange Transport Service on local computer
    Error 1053: This Service did not respond to the start of control request in a timely fashion”
    This error is from the GUI wizard itself:
    Error:
    The following error was generated when "$error.Clear();
    $maxWait = New-TimeSpan -Minutes 8
    $timeout = Get-Date;
    $timeout = $timeout.Add($maxWait);
    $currTime = Get-Date;
    $successfullySetConfigDC = $false;
    while($currTime -le $timeout)
    $setSharedCDCErrors = @();
    try
    Set-SharedConfigDC -DomainController $RoleDomainController -ErrorVariable setSharedCDCErrors -ErrorAction SilentlyContinue;
    $successfullySetConfigDC = ($setSharedCDCErrors.Count -eq 0);
    if($successfullySetConfigDC)
    break;
    Write-ExchangeSetupLog -Info ("An error ocurred while setting shared config DC. Error: " + $setSharedCDCErrors[0]);
    catch
    Write-ExchangeSetupLog -Info ("An exception ocurred while setting shared config DC. Exception: " + $_.Exception.Message);
    Write-ExchangeSetupLog -Info ("Waiting 30 seconds before attempting again.");
    Start-Sleep -Seconds 30;
    $currTime = Get-Date;
    if( -not $successfullySetConfigDC)
    Write-ExchangeSetupLog -Error "Unable to set shared config DC.";
    " was run: "System.Exception: Unable to set shared config DC.
    at Microsoft.Exchange.Configuration.Tasks.Task.WriteError(Exception exception, ErrorCategory category, Object target, Boolean reThrow, String helpUrl)
    at Microsoft.Exchange.Configuration.Tasks.Task.WriteError(Exception exception, ErrorCategory category, Object target)
    at Microsoft.Exchange.Management.Deployment.WriteExchangeSetupLog.InternalProcessRecord()
    at Microsoft.Exchange.Configuration.Tasks.Task.<ProcessRecord>b__b()
    at Microsoft.Exchange.Configuration.Tasks.Task.InvokeRetryableFunc(String funcName, Action func, Boolean terminatePipelineIfFailed)".
    Exchange logs which have been written:
    **The error will loop around for 8 minutes on trying to set-sharedconfig DC whatever this is trying to do ??
    [01/20/2015 17:13:20.0084] [2] Active Directory session settings for 'Set-SharedConfigDC' are: View Entire Forest: 'True', Configuration Domain Controller:mydomain.com', Preferred Global Catalog: 'mydomain.com', Preferred Domain Controllers:
    '{ mydomain.com}'
    [01/20/2015 17:13:20.0084] [2] User specified parameters: 
    -DomainController:mydomain.com' -ErrorVariable:'setSharedCDCErrors' -ErrorAction:'SilentlyContinue'
    [01/20/2015 17:13:20.0084] [2] Beginning processing Set-SharedConfigDC
    [01/20/2015 17:13:20.0178] [2] The call to Microsoft Exchange Active Directory Topology service on server 'TopologyClientTcpEndpoint (localhost)' returned an error. Error details No Minimal Required Number of Suitable Directory Servers
    Found in Forest mydomain.com Site Default-First-Site and connected Sites..
    [01/20/2015 17:13:20.0178] [2] No Minimal Required Number of Suitable Directory Servers Found in Forest mydomain.com Site Default-First-Site and connected Sites.
    [01/20/2015 17:13:20.0178] [2] The call to Microsoft Exchange Active Directory Topology service on server 'TopologyClientTcpEndpoint (localhost)' returned an error. Error details No Minimal Required Number of Suitable Directory Servers
    Found in Forest mydomain.com Site Default-First-Site and connected Sites..
    [01/20/2015 17:13:20.0178] [2] No Minimal Required Number of Suitable Directory Servers Found in Forest mydomain.com Site Default-First-Site and connected Sites.
    [01/20/2015 17:13:20.0178] [2] Ending processing Set-SharedConfigDC
    [01/20/2015 17:13:20.0193] [2] Beginning processing Write-ExchangeSetupLog
    [01/20/2015 17:13:20.0193] [2] An error ocurred while setting shared config DC. Error: The call to Microsoft Exchange Active Directory Topology service on server 'TopologyClientTcpEndpoint (localhost)' returned an error. Error details
    No Minimal Required Number of Suitable Directory Servers Found in Forest mydomain.com Site Default-First-Site and connected Sites..
    [01/20/2015 17:13:20.0193] [2] Ending processing Write-ExchangeSetupLog
    [01/20/2015 17:13:20.0193] [2] Beginning processing Write-ExchangeSetupLog
    [01/20/2015 17:13:20.0193] [2] Waiting 30 seconds before attempting again.
    [01/20/2015 17:13:20.0193] [2] Ending processing Write-ExchangeSetupLog
    [01/20/2015 17:13:50.0195] [2] Beginning processing Write-ExchangeSetupLog
    [01/20/2015 17:13:50.0273] [2] [ERROR] Unable to set shared config DC.
    [01/20/2015 17:13:50.0273] [2] [ERROR] Unable to set shared config DC.
    [01/20/2015 17:13:50.0288] [2] Ending processing Write-ExchangeSetupLog
    [01/20/2015 17:13:50.0288] [1] The following 1 error(s) occurred during task execution:
    [01/20/2015 17:13:50.0288] [1] 0.  ErrorRecord: Unable to set shared config DC.
    [01/20/2015 17:13:50.0288] [1] 0.  ErrorRecord: System.Exception: Unable to set shared config DC.
       at Microsoft.Exchange.Configuration.Tasks.Task.WriteError(Exception exception, ErrorCategory category, Object target, Boolean reThrow, String helpUrl)
       at Microsoft.Exchange.Configuration.Tasks.Task.WriteError(Exception exception, ErrorCategory category, Object target)
       at Microsoft.Exchange.Management.Deployment.WriteExchangeSetupLog.InternalProcessRecord()
       at Microsoft.Exchange.Configuration.Tasks.Task.<ProcessRecord>b__b()
       at Microsoft.Exchange.Configuration.Tasks.Task.InvokeRetryableFunc(String funcName, Action func, Boolean terminatePipelineIfFailed)
    [01/20/2015 17:13:50.0288] [1] [ERROR] The following error was generated when "$error.Clear();
    $maxWait = New-TimeSpan -Minutes 8
    $timeout = Get-Date;
    $timeout = $timeout.Add($maxWait);
    $currTime = Get-Date;
    $successfullySetConfigDC = $false;
    while($currTime -le $timeout)
    $setSharedCDCErrors = @();
    try
    Set-SharedConfigDC -DomainController $RoleDomainController -ErrorVariable setSharedCDCErrors -ErrorAction SilentlyContinue;
    $successfullySetConfigDC = ($setSharedCDCErrors.Count -eq 0);
    if($successfullySetConfigDC)
    break;
    Write-ExchangeSetupLog -Info ("An error ocurred while setting shared config DC. Error: " + $setSharedCDCErrors[0]);
    catch
    Write-ExchangeSetupLog -Info ("An exception ocurred while setting shared config DC. Exception: " + $_.Exception.Message);
    Write-ExchangeSetupLog -Info ("Waiting 30 seconds before attempting again.");
    Start-Sleep -Seconds 30;
    $currTime = Get-Date;
    if( -not $successfullySetConfigDC)
    Write-ExchangeSetupLog -Error "Unable to set shared config DC.";
            " was run: "System.Exception: Unable to set shared config DC.
       at Microsoft.Exchange.Configuration.Tasks.Task.WriteError(Exception exception, ErrorCategory category, Object target, Boolean reThrow, String helpUrl)
       at Microsoft.Exchange.Configuration.Tasks.Task.WriteError(Exception exception, ErrorCategory category, Object target)
       at Microsoft.Exchange.Management.Deployment.WriteExchangeSetupLog.InternalProcessRecord()
       at Microsoft.Exchange.Configuration.Tasks.Task.<ProcessRecord>b__b()
       at Microsoft.Exchange.Configuration.Tasks.Task.InvokeRetryableFunc(String funcName, Action func, Boolean terminatePipelineIfFailed)".
    [01/20/2015 17:13:50.0288] [1] [ERROR] Unable to set shared config DC.
    [01/20/2015 17:13:50.0288] [1] [ERROR-REFERENCE] Id=AllADRolesCommonServiceControl___ee47ab1c06fb47919398e2e95ed99c6c Component=EXCHANGE14:\Current\Release\Shared\Datacenter\Setup
    [01/20/2015 17:13:50.0288] [1] Setup is stopping now because of one or more critical errors.
    [01/20/2015 17:13:50.0288] [1] Finished executing component tasks.
    [01/20/2015 17:13:50.0304] [1] Ending processing Install-BridgeheadRole
    Windows Event Viewer:
    Process Microsoft.Exchange.Directory.TopologyService.exe (PID=5276) Forest mydomain.com. Exchange Active Directory Provider couldn't find minimal required number of suitable Global Catalog servers
    in either the local site 'Default-First-Site' or the following sites:

    Hi apl228,
    1. Please make sure the IPv6 is enabled.
    2. Please make sure the account that install Exchange server has Administrator permission.
    3. Please make sure DNS has been configured correctly.
    Thanks
    Mavis Huang
    TechNet Community Support

  • Remote update manager and ausst

    Hello,
    I try to set up automatic updates for all creative cloud applications in our company. The AUSST is already working and a web-directory exists, but there are still some problems I cannot solve yet.
    1. Does the remote udpate manager also use the AdobeUpdater.Overrides? If not, how can I use our internal AUSST Web Server for the remote updates?
    2. Which option in the Creative Cloud Packager creates the folder \ProgramData\Adobe\AAMUpdater\1.0\ ?
    3. Where does the Adobe Update Manager save the .overrides-file I chose in the Adobe Update Manager? Does this file also apply for the Remote Update Manager?
    4. Is there any way to change the extended configuration parameters for a package after the installation
    Thanks and regards,
    Tobias

    Hi Tobias,
    Please find the answers outlined below.
    1. Does the remote update manager also use the AdobeUpdater.Overrides? If not, how can I use our internal AUSST Web Server for the remote updates?
    Ans: Setup RUM with AUSST : Creative Cloud Help | Using Adobe Remote Update Manager
    2. Which option in the Creative Cloud Packager creates the folder \ProgramData\Adobe\AAMUpdater\1.0\ ?
    Ans : Creative cloud packager doesn't create this folder. this is being created while deploying the update payloads.
    3. Where does the Adobe Update Manager save the .overrides-file I chose in the Adobe Update Manager? Does this file also apply for the Remote Update Manager?
    Ans: Override.xml is being generated manually using Adobe update server setup tool. In case you install the package without setting up an update sever under package configuration, it generates AdobeUpdaterAdminPrefs.dat.
    4. Is there any way to change the extended configuration parameters for a package after the installation
    Ans : Package configuration can't be changed once created once created.
    Hope this helps.
    Let me know in case you would need any further clarification.
    Thanks,
    Ashish

  • Remote Update Server setup

    Using the AUSST tool to set up a remote update server on Windows Server 2012R2 which is IIS 8.5.
    Working through this document: http://helpx.adobe.com/creative-cloud/packager/update-server-setup-tool.html#Preparing a web server to use as the update server
    Have reached the point where it says "Add the httpHandles for the zip, xml, crl, dmg, and sig extension in the web.config file as shown here:"
    I have added the lines specified to the web.config file, here is the complete file:
    configuration>
        <system.web>
            <compilation targetFramework="4.5" />
            <membership>
                <providers>
                    <add name="WebAdminMembershipProvider" type="System.Web.Administration.WebAdminMembershipProvider" />
                </providers>
            </membership>
            <httpModules>
                <add name="WebAdminModule" type="System.Web.Administration.WebAdminModule"/>
            </httpModules>
            <authentication mode="Windows"/>
            <authorization>
                <deny users="?"/>
            </authorization>
            <identity impersonate="true"/>
           <trust level="Full"/>
           <pages validateRequest="true"/>
           <globalization uiCulture="auto:en-US" />
               <httphandlers>
                 <add path="*.zip" verb="*" type="system.web.staticfilehandler" />
                 <add path="*.xml" verb="*" type="system.web.staticfilehandler" />
                 <add path="*.crl" verb="*" type="system.web.staticfilehandler" />
                 <add path="*.dmg" verb="*" type="system.web.staticfilehandler" />
                 <add path="*.sig" verb="*" type="system.web.staticfilehandler" />
               </httphandlers>
        </system.web>
        <system.webServer>
            <modules>
                <add name="WebAdminModule" type="System.Web.Administration.WebAdminModule" preCondition="managedHandler" />
            </modules>
            <validation validateIntegratedModeConfiguration="false" />
        </system.webServer>
    </configuration>
    But when I try to access the web site I get this: " The configuration section 'httphandlers' cannot be read because it is missing a section declaration "
    Clearly I am a newbie in IIS (and indeed on Web Development of any sort).
    Could someone please point out the no-doubt-obvious mistake?
    Thanks.

    I'm on 2012 R2 too.
    ISAPI Module is not available by default. Choose to add ISAPI features (and Server Side Includes) using the Server Manager, Add Roles and Features, Web Server, Web Server, Application Development. I chose both ISAPI options as well as Server Side Includes - not sure which is needed.
    Added Server Side Includes (as well as the ISAPI .xml .crl .zip .dmg .sig ) entries in Add Module Mappings (as per  https://forums.adobe.com/thread/951308?tstart=0)
    My HTTP Handlers section is as follows:
            <httpHandlers>
                <add path="*.xml" verb="*" type="System.Web.StaticFileHandler"/>
                <add path="*.crl" verb="*" type="System.Web.StaticFileHandler"/>
                <add path="*.zip" verb="*" type="System.Web.StaticFileHandler"/>
                <add path="*.dmg" verb="*" type="System.Web.StaticFileHandler"/>
                <add path="*.sig" verb="*" type="System.Web.StaticFileHandler"/>
          <add verb="*" path="*.rules" type="System.Web.HttpForbiddenHandler" validate="true"/>
          <add verb="*" path="*.xoml" type="System.ServiceModel.Activation.HttpHandler, System.ServiceModel, Version=3.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089" validate="false"/>
                <add path="*.svc" verb="*" type="System.ServiceModel.Activation.HttpHandler, System.ServiceModel, Version=3.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089" validate="false"/>
                <add path="trace.axd" verb="*" type="System.Web.Handlers.TraceHandler" validate="True"/>
                <add path="WebResource.axd" verb="GET" type="System.Web.Handlers.AssemblyResourceLoader" validate="True"/>
                <add path="*.axd" verb="*" type="System.Web.HttpNotFoundHandler" validate="True"/>
                <add path="*.aspx" verb="*" type="System.Web.UI.PageHandlerFactory" validate="True"/>
                <add path="*.ashx" verb="*" type="System.Web.UI.SimpleHandlerFactory" validate="True"/>
                <add path="*.asmx" verb="*" type="System.Web.Services.Protocols.WebServiceHandlerFactory, System.Web.Services, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a" validate="False"/>
                <add path="*.rem" verb="*" type="System.Runtime.Remoting.Channels.Http.HttpRemotingHandlerFactory, System.Runtime.Remoting, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089" validate="False"/>
                <add path="*.soap" verb="*" type="System.Runtime.Remoting.Channels.Http.HttpRemotingHandlerFactory, System.Runtime.Remoting, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089" validate="False"/>
                <add path="*.asax" verb="*" type="System.Web.HttpForbiddenHandler" validate="True"/>
                <add path="*.ascx" verb="*" type="System.Web.HttpForbiddenHandler" validate="True"/>
                <add path="*.master" verb="*" type="System.Web.HttpForbiddenHandler" validate="True"/>
                <add path="*.skin" verb="*" type="System.Web.HttpForbiddenHandler" validate="True"/>
                <add path="*.browser" verb="*" type="System.Web.HttpForbiddenHandler" validate="True"/>
                <add path="*.sitemap" verb="*" type="System.Web.HttpForbiddenHandler" validate="True"/>
                <add path="*.dll.config" verb="GET,HEAD" type="System.Web.StaticFileHandler" validate="True"/>
                <add path="*.exe.config" verb="GET,HEAD" type="System.Web.StaticFileHandler" validate="True"/>
                <add path="*.config" verb="*" type="System.Web.HttpForbiddenHandler" validate="True"/>
                <add path="*.cs" verb="*" type="System.Web.HttpForbiddenHandler" validate="True"/>
                <add path="*.csproj" verb="*" type="System.Web.HttpForbiddenHandler" validate="True"/>
                <add path="*.vb" verb="*" type="System.Web.HttpForbiddenHandler" validate="True"/>
                <add path="*.vbproj" verb="*" type="System.Web.HttpForbiddenHandler" validate="True"/>
                <add path="*.webinfo" verb="*" type="System.Web.HttpForbiddenHandler" validate="True"/>
                <add path="*.licx" verb="*" type="System.Web.HttpForbiddenHandler" validate="True"/>
                <add path="*.resx" verb="*" type="System.Web.HttpForbiddenHandler" validate="True"/>
                <add path="*.resources" verb="*" type="System.Web.HttpForbiddenHandler" validate="True"/>
                <add path="*.mdb" verb="*" type="System.Web.HttpForbiddenHandler" validate="True"/>
                <add path="*.vjsproj" verb="*" type="System.Web.HttpForbiddenHandler" validate="True"/>
                <add path="*.java" verb="*" type="System.Web.HttpForbiddenHandler" validate="True"/>
                <add path="*.jsl" verb="*" type="System.Web.HttpForbiddenHandler" validate="True"/>
                <add path="*.ldb" verb="*" type="System.Web.HttpForbiddenHandler" validate="True"/>
                <add path="*.ad" verb="*" type="System.Web.HttpForbiddenHandler" validate="True"/>
                <add path="*.dd" verb="*" type="System.Web.HttpForbiddenHandler" validate="True"/>
                <add path="*.ldd" verb="*" type="System.Web.HttpForbiddenHandler" validate="True"/>
                <add path="*.sd" verb="*" type="System.Web.HttpForbiddenHandler" validate="True"/>
                <add path="*.cd" verb="*" type="System.Web.HttpForbiddenHandler" validate="True"/>
                <add path="*.adprototype" verb="*" type="System.Web.HttpForbiddenHandler" validate="True"/>
                <add path="*.lddprototype" verb="*" type="System.Web.HttpForbiddenHandler" validate="True"/>
                <add path="*.sdm" verb="*" type="System.Web.HttpForbiddenHandler" validate="True"/>
                <add path="*.sdmDocument" verb="*" type="System.Web.HttpForbiddenHandler" validate="True"/>
                <add path="*.mdf" verb="*" type="System.Web.HttpForbiddenHandler" validate="True"/>
                <add path="*.ldf" verb="*" type="System.Web.HttpForbiddenHandler" validate="True"/>
                <add path="*.exclude" verb="*" type="System.Web.HttpForbiddenHandler" validate="True"/>
                <add path="*.refresh" verb="*" type="System.Web.HttpForbiddenHandler" validate="True"/>
                <add path="*" verb="GET,HEAD,POST" type="System.Web.DefaultHttpHandler" validate="True"/>
                <add path="*" verb="*" type="System.Web.HttpMethodNotAllowedHandler" validate="True"/>
            </httpHandlers>
    You should be able to get a web page with "0001" printed on it when you access your servers website from another PC.
    I used the default paths so this was my URL:
    http://server.ucd.ie/Adobe/CS/webfeed/oobe/aam20/win/updaterfeed.xml

  • Remote Update Manager - Acrobat Pro

    Hello everyone,
    Please review this snippit from the Remote Update Manager (RUM) documentation.
    Note: Remote Update Manager is meant only for a subsection of Adobe Desktop products. It can not be used for browser plug-ins such as Flash Player and for Adobe Reader, Acrobat Professional, and Adobe AIR application updates.
    I ask the question... WHY?
    Why, at the very least isn't Acrobat Pro part of the Adobe Update Server Setup Tool (AUSST) and RUM configuration?
    I've finally gotten my Adobe udate server working and created a Scheduled Task to run the incremental update everyday. Perfect.
    Now I'm implementing the override files on my client machines and creating a Scheduled Tasks to run the RemoteUpdateManager so that my users (as well as myself) do not have to worry about updating the Adobe programs... BUT... one of the programs that we use quite a bit, Acrobat Pro, is not part of this automated update scenario.
    So, I'm left still updating Acrobat manually which almost, but not quite, defeats the purpose of AUSST & RUM.
    Can anyone from Adobe tell me whether there are plans to add Acrobat Pro to the automated updating procedure mentioned above?
    Please say yes.
    I'm so close to being at the point where the Adobe updates are completely automated. Adding Acrobat Pro to the list would be like hitting a grand slam in the 9th inning to win the game.
    Thanks in advance.

    Markus, thank you for the information.
    First, If Acrobat is not a creative product then it shouldn't be offered in the CC collection of programs.
    Second, Things being the way they are - Acrobat being deployable with the CC programs - it should be updated the same way as the CC programs. It would just make it nice and tidy and dare I say efficient.
    I will check out the link to the tools. Great, more software to download, install and configure.

  • Setup Wizard does not exist on my 8700v... where is it hidden?!

    I have bought a second hand BB, previously on vodafone, currently on O2.  The getting started guide assumes I can find the setup wizard instantly.  Not only does it not appear automatically it is not in settings or any other place I have looked.  The front convenience button does not do anything, so doesn't help either.  I haven't set up anything on the phone, other than the time and registering it on the wireless network... setup wizard is the first port of call but can't get to it.  Any ideas??

    Hi there,
    It is possible that the previous user removed it (there are ways to do this) and then simply wiped the device before passing it on to you.
    If you need it, you can reload the OS using the steps located here:
    http://supportforums.blackberry.com/t5/BlackBerry-Device-Software/How-To-Reload-Your-Operating-Syste...
    Or, you should be able to do everything without needing access to the Setup Wizard at all.  For example, all connection settings can be managed through Manage Connections app, keyboard settings and convenience key settings can be managed in the Options, and so on.
    If you want to reload the OS though, you can use the steps located in the above link.  The only catch is that you'll want to make sure you're using the OS for the original carrier (branded to Vodafone).
    I hope this info helps!
    If you want to thank someone for their comment, do so by clicking the Thumbs Up icon.
    If your issue is resolved, don't forget to click the Solution button on the resolution!

  • Error while running the diagnositc system setup wizard

    Hello All,
    When I am running the diagnstics setup wizard,I am getting the following warning for SSO.SMD is the SID for my solution manager system and it is ABAP+JAVA system:
    SSO Setup : both Java and Abap stacks are using a ticket certificate with identical DN : 'CN=SMD'
    SSO will not work with such add-in configurations. Please refer to Details below for manual actions to be taken, and run this setup step again.
    Step SSO Details
    Either the Java ticket certificate or the Abap ticket certificate of the managing system (ABAP Host=localhost sys=01 client=200) must be deleted and re-created, using a Subject DN other than 'CN=SMD'
    For ABAP stack : please use transaction STRUSTSSO2 to delete the system PSE, and recreate the PSE Own Certificate with a different name (NB : this will destroy any existing SSO Setup on ABAP side)Or, for Java stack : please refer to SAP Note 701205, section 'J2EE', third bullet and note attachments (ReplacingPublicKey.pdf) for doing it on Java stack
    Also I am getting an error:
    The upgrader doesnt run,it says the SMD upgrader will be run
    What does this mean
    Please help
    Rohit

    Thanks Jagan
    I have run upgrader as u mentioned here
    Just needed to confirm
    Well I will correct the SSO as u mentioned,Thanks
    Also I am getting an error for wily interscopy while I run the setup for managed system
    I will post that in a diferent post
    Thanks
    Rohit

Maybe you are looking for