Diagnostics System: Managed System Setup Wizard

Hi there!
I have installed the Host Agent and Diagnostic Agent on a test-system successfully. Now I have tried to start the Setup Wizard for managed systems (http://<hostname>:port/smd). The system collection was no problem, but the Setup Parameters. If I choose the directories of the "System Install Path", the "Instance Path" and also the "Instance Number" the following Message appears: "No Diagnostics Agent available at this time Please install or start an SMD Agent for <hostname>".
I don't know the reason, because the Diagnostic Agent is running and I think my parameters will be okay:
System Install Path: usr/sap/DAA/
Instance Path: usr/sap/DAA/SMDA97/
Instance Numer: 97
Is there a failure?
I look forward to your reply!
Best reagrds,
Andreas

Hi there!
I have found an interesting warning:
Managing System '<hostname>' is registered in the SLD but the CIM declaration is not valid, the agents cannot be attached correctly. check SLD Managing system declaration. (detail: CIM_ERR_FAILED: Cannot find SAP_BCCentralServiceInstance of SAP_J2EEEngineCluster SAP_J2EEEngineCluster.CreationClassName="SAP_J2EEEngineCluster",Name="<hostname>" in SLD LR)
I think it is the reason for my problems .. Can anybody help me?
Best regards,
Andreas

Similar Messages

Managed System Setup Wizard Status " ? " SPS 15

Dear All,
I have a problem with my SMD.
I have already upgrade the Solution Manager 4.0 from SPS 13 to SPS 15.
I want to setup E2E Root Cause Analysis for CRM system.
So I configured SMSY since I didn't configure SLD yet.
I've already installed SMD Agent in managed system successfully also.
When I run the Diagnostics Setup -> Managed System -> Setup WIzard,
in the Setup Parameter Step , it said that " No SMD Agent is currently available (ie not assigned). Please install an agent for jktgrhxsapc1 or unassign an existing agent in Agent Administration Why is that so ?
In the Agent Administration ( DIagnostics Administration -> Managed SYstem -> Agent Administration) found that the agent is online.
Second, In managed system setup wizard - System Selection Step, there's an unknown system with SID '???' and the status said that 'Some SMD Agent Runnning on host not belonging any successfully published solution' . Where can we find the log if we have an error when publishing solution ?
Thanks in advance,
Adhi

Hi Labinot,
I have checked the agent log looks like no error,
id loaded TTL refType
applications:com.sap.smd.agent.application.global.configuration true 0 strong
applications:com.sap.smd.agent.application.tracing true 0 strong
applications:com.sap.smd.agent.application.wilyhost true 0 strong
applications:com.sap.smd.agent.application.flightrecorderdumpscan true 0 strong
applications:com.sap.smd.agent.application.telnet true 0 strong
applications:com.sap.smd.agent.application.filesystem true 0 strong
applications:com.sap.smd.agent.application.logviewer true 0 strong
applications:com.sap.smd.agent.application.remotesetup true 0 strong
applications:com.sap.smd.agent.application.database true 0 strong
applications:com.sap.smd.agent.application.datacollector true 0 strong
applications:com.sap.smd.agent.application.runtime true 0 strong
applications:com.sap.smd.agent.application.connectors true 0 strong
applications:com.sap.smd.agent.application.wily true 0 strong
Apr 10, 2008 7:13:07 PM [Thread[SMDAgent connection thread,5,main]] Info       [p4://jktgrhxsapl1:50604] Registration done.
Apr 10, 2008 7:13:07 PM [Thread[SMDAgent connection thread,5,main]] Info       [p4://jktgrhxsapl1:50604] Agent ready.
Apr 10, 2008 7:27:25 PM [Thread[Thread-37,5,main]] Info       Returned service object :com.sap.smd.core.runtime.agent.LogService@14cee41f
Apr 10, 2008 7:27:26 PM [Thread[Thread-34,5,main]] Info       Returned service object :com.sap.smd.core.runtime.agent.LogService@14cee41f
any other idea?
-Adhi-

Managed System Setup Wizard: which J2EE-Admin-User

Hello,
I'm running the managed system setup wizard in the diagnostic.
In the setup of the parameters, I have to enter the J2EE-Admin-User. But which one?
I tried:
SMD_AGT_ADM (Dialog user with admin roles on both stacks)
SMD_AGT_ADM (Communications user with admin roles on both stacks)
The user was created by me before the setup. But regardless of the user settings, I get the following error:
A logon failure occured on frces4139/SM7/00 (192.168.1.139).
System Setup aborted, to prevent locking the User Account.
Please check error details, specify a valid User/Password if necessary, and start Setup again
Any ideas? Which user or user settings have to be maintained?
Thanks,
Jan

Hello,
I think the user you need to enter here is the j2ee_admin user or another user with SAP_J2EE_ADMIN role.
Regards,
Benjamin Rouger

Cisco Ironport ESA System setup wizard

Hi all,
i'm installing a Cisco ESA. I configured IP of Data1 and Management and Hostname with temporary data to enable feature keys.
Now i have to migrate those parameter to final configuration except management. IF i run again the system setup wizard does it blow up
the features installed and activated?
Thanks
smaikol

If you re-run systemsetup again from the CLI - it will reset the IP and listeners you have configured, along with the network information associated. You are presented the warning message from the CLI:
WARNING: The system setup wizard will completely delete any existing 'listeners' and all associated settings including the 'Host Access Table'
- mail operations may be interrupted.
</warning>
The features themselves are still present and licensed, and should not change. During the setup wizard prompts - you are asked if you want to use and enable the features - such as Anti-Spam, Anti-Virus:
Do you want to use Anti-Spam scanning in the default Incoming Mail policy? [Y]>
Would you like to enable the Spam Quarantine? [Y]>
1. IronPort Anti-Spam
2. Intelligent Multi-Scan
3. Cloudmark Service Provider Edition
Enter the number of the Anti-Spam engine you would like to use on the default Incoming Mail policy.
[]> 1
IronPort selected for DEFAULT policy
Do you want to use Anti-Virus scanning in the default Incoming and Outgoing Mail policies? [Y]>
1. McAfee Anti-Virus
2. Sophos Anti-Virus
Enter the number of the Anti-Virus engine you would like to use on the default Incoming and Outgoing Mail policies.
[]> 2
Sophos selected for DEFAULT policy
Do you want to use Anti-Malware scanning in the default Incoming Mail policies? [Y]>
Advanced Malware Protection selected for DEFAULT policy
Do you want to enable Outbreak Filters? [Y]>
Outbreak Filters enabled.
Allow the sharing of limited data with SenderBase? [Y]>
You have successfully configured Outbreak Filters and SenderBase.
</setup>
Usually, it is just simpler if you are re-IPing the ESA from a temporary IP to permanent IP to just change the information associated via ifconfig and modify the interface as needed, or on the GUI use Network > IP Interfaces.
-Robert

No hosts found in SMD Managed Sytem Setup Wizard

Dear Experts,
I connected a Portal system to SMD server. I manaualy defined the system in SMSY instead of SLD.
When I went to the SMD Managed System Setup Wizard, it reported"No instances or
servers are defined for this system. Please check its definition in SMSY before proceeding to setup".
I've carefully checked all system definition in SMSY. I wonder if others have come across the similiar
problem, sincerely hoping for your advice.
Best Regards,
Karl

Hi, David,
I just can't find my installed agents in SLD view. But under Agent administration Agent Tab I can see them with status green. I installed agent without registration to SLD, but user directly P4 connection.
I tried go SMD view, I can see my agents there , and it has a column SLD settings, push SLD settings,
I clicked to push SLD settings, but an error occured:(Failed to send SLD settings to remote agent: sapeppap01 (detail: Failed to save new SLD settings; nested exception is: java.lang.StringIndexOutOfBoundsException: String index out of range: -1).
Best Regards,
Karl

SMD - MANAGED SYSTEM SETUP WIZARD.

Hi,
I'm on Solman SPS 15, trying to setup EWA for portals.
Ran the managed system setup, got the error.
Step DataCollect Details
Initial Data Collect ERROR for host XXXXXXX
!! Exception : Tue Jun 24 11:03:08 EDT 2008 | storeComponentVersion(...):ComponentVersion ComponentVersion [SAP J2EE ENGINE 7.00][01200314690200004229][N/A][N/A]:Cannot insert/update/delete the component '[IComponent: key=1199734241239977, name=SAP J2EE ENGINE 7.00, internalVersion=7.00   PatchLevel 29172.450, ppmsId=01200314690200004229, date=Tue Jun 24 11:03:06 EDT 2008, status=[N], mod=[M], messageServer=XXXXX:3901, masterComponent=true]'! Please see log for next warning(s).
com.sap.sup.admin.scheduler.exception.FatalTaskExecutionException: Tue Jun 24 11:03:08 EDT 2008 | storeComponentVersion(...):ComponentVersion [SAP J2EE ENGINE 7.00][01200314690200004229][N/A][N/A]:Cannot insert/update/delete the component '[IComponent: key=1199734241239977, name=SAP J2EE ENGINE 7.00, internalVersion=7.00   PatchLevel 29172.450, ppmsId=01200314690200004229, date=Tue Jun 24 11:03:06 EDT 2008, status=[N], mod=[M], messageServer=XXXXXX:3901, masterComponent=true]'! Please see log for next warning(s).
at com.sap.sup.admin.scheduler.task.remote.AbstractGatherRemoteTask.checkTaskResult(AbstractGatherRemoteTask.java:42)
at com.sap.sup.admin.scheduler.task.remote.config.InitialConfigGatherTask.parseXml(InitialConfigGatherTask.java:107)
at com.sap.sup.admin.scheduler.task.remote.config.InitialConfigGatherTask.process(InitialConfigGatherTask.java:68)
at com.sap.sup.admin.scheduler.config.DataCollect.execute(DataCollect.java:138)
at com.sap.sup.admin.setup.AppCfgTasks.runInitialDataCollect(AppCfgTasks.java:57)
at com.sap.sup.admin.setup.SetupStep.execute(SetupStep.java:305)
at com.sap.smd.agent.plugins.remotesetup.SapInstance.setup(SapInstance.java:263)
at com.sap.sup.admin.setup.SapCluster.setup(SapCluster.java:655)
at com.sap.sup.admin.setup.SapCluster.access$000(SapCluster.java:28)
at com.sap.sup.admin.setup.SapCluster$SetupRunner.run(SapCluster.java:903)
at java.lang.Thread.run(Thread.java:534).
Plz advise.
Thx in advance.

#1.#00144F17012A00C700000018000066BD0004506CFD4B5C16#1214328943107#/Applications/AdminConsole/ConfigurationChangeReportingUpload#sap.com/tcwddispwda#com.sap.sup.admin.upload.configreport.xml.ConfigurationChangeHandler#J2EE_ADMIN#16932##XXXXX_SID_28888050#J2EE_ADMIN#0964c860421111dd94ec00144f17012a#Thread[Thread-83,5,SAPEngine_Application_Thread[impl:3]_Group]##0#0#Error#1#/Applications/AdminConsole/ConfigurationChangeReportingUpload#Plain###[7498] storeComponentVersion(...):ComponentVersion [SAP J2EE ENGINE 7.00][01200314690200004229][N/A][N/A]:Cannot insert/update/delete the component '[IComponent: key=1214257551084558, name=SAP J2EE ENGINE 7.00, internalVersion=7.00   PatchLevel 29172.450, ppmsId=01200314690200004229, date=Tue Jun 24 13:35:42 EDT 2008, status=[N], mod=[M], messageServer=XXXXX:3901, masterComponent=true].
I found this in application log
Edited by: Kobby bryant on Jun 24, 2008 7:39 PM

Error while running the diagnositc system setup wizard

Hello All,
When I am running the diagnstics setup wizard,I am getting the following warning for SSO.SMD is the SID for my solution manager system and it is ABAP+JAVA system:
SSO Setup : both Java and Abap stacks are using a ticket certificate with identical DN : 'CN=SMD'
SSO will not work with such add-in configurations. Please refer to Details below for manual actions to be taken, and run this setup step again.
Step SSO Details
Either the Java ticket certificate or the Abap ticket certificate of the managing system (ABAP Host=localhost sys=01 client=200) must be deleted and re-created, using a Subject DN other than 'CN=SMD'
For ABAP stack : please use transaction STRUSTSSO2 to delete the system PSE, and recreate the PSE Own Certificate with a different name (NB : this will destroy any existing SSO Setup on ABAP side)Or, for Java stack : please refer to SAP Note 701205, section 'J2EE', third bullet and note attachments (ReplacingPublicKey.pdf) for doing it on Java stack
Also I am getting an error:
The upgrader doesnt run,it says the SMD upgrader will be run
What does this mean
Please help
Rohit

Thanks Jagan
I have run upgrader as u mentioned here
Just needed to confirm
Well I will correct the SSO as u mentioned,Thanks
Also I am getting an error for wily interscopy while I run the setup for managed system
I will post that in a diferent post
Thanks
Rohit

Diagnostics system Advanced setup error

Hi all,
I am configuring solman diagnostics. My system level is Solman 7.0 SPS 16. I have executed Diagnostics system setup wizard and all taskes executed sucessfully.
OS is windows 2003 Server and Java 2 SE 1.4.12 version is installed in the server
When i click on Diagnostics setup> Diagnostics system> Advanced setup, i am getting 500 Internal server error
Failed to Process the request
Following error appears
java.lang.NoSuchMethodError: com.sap.sup.admin.setup.ManagingServices.readMultipleEMs()[Lcom/sap/sup/admin/setup/SysConnectData;
I have installed wily Enterprise manager 7.2.2.0. and
http:<host>:8081/workstation and http:<host>:8081/webview both are opening
kindly help

Hi all,
I want to uninstall the current JAVA j2sdk1.4.2_13 from the diagnostics server and update to JDK 1.6.
I hope the error which i am facing is because of the java version.
Can i directly uninstall from start>settings>control panel--> Add and remove programs --> java 1.4.2.13
then update the jdk 1.6. Will this action affect SAP Solman system in any way.
kindly help

Solution Manage Diagnostics - error in the system setup

Hello,
I have installed SMD and I installed one system with the Setup Wizard of the SMD. According to the result of the setup, it was successful.
However, when I do a self check in SMD, I get the five following errors in the Monitored Setup node :
5 error(s) found:
No DB agent autoconfig status found in SMD repository for sv42/SM1. Please make sure system has been setup in Monitored Setup.
No JVM startup parameters setting status found in SMD repository for sv42/SM1. Please make sure system has been setup in Monitored Setup.
No Roles assignment status found in SMD repository for sv42/SM1. Please make sure system has been setup in Monitored Setup.
No SSO Setup status found in SMD repository for sv42/SM1. Please make sure system has been setup in Monitored Setup.
No Telnet agent autoconfig status found in SMD repository for sv42/SM1. Please make sure system has been setup in Monitored Setup.
Can anybody help me ?
Thank you

If you goto http://server:port/smd >>> Diagnostic Setup >>> Diagnostic System >>> Setup Wizard, do you have a message similar to:
Last Diagnostics setup wizard execution on Tue Oct 09 13:34:44 2007 :
- 0 setup steps disabled by user
- 13 setup steps succesfully executed
- 0 setup steps executed with warnings
- 0 setup steps in error
If you do, your Diagnostic server is correctly setup.
For Managed system, same thing, http://server:port/smd >>> Diagnostic Setup >>> Managed Systems >>> Setup Wizard, or check setup results to make sure it's completed.

RCS Managed system setup

Hi,
Do we need to re run managed system setup wizard, each time system stack or EHP is updated ? or even when solman stack is updated ?
Reason: We recently updated solman to SPS27 after which I dont see any data collection happening specially for User Load for ABAP systems
and none for java
BR,
Shyam

Hello,
Run transaction solman_setup and check in the OVERVIEW what are the Open Activities listed in Basic and Initial Configuration.
All activities there must be redone, grey, red or green.
In these tasks there will be the Diagnostics Configuration. This step includes setting the Maintenance Mode ON and OFF, which will stop all agents and deploy the new software to them (the so-called agelets that are delivered centrally from Solman LM-SERVICE to the managed system's SMD Agent).
This is all you must execute after a LM-SERVICE upgrade.
Therefore there's no reason to rerun the whole setup wizard, as it may cause issues with wrong parameters in the setup wizard. If the managed system is working perfectly and this is only an upgrade, it is not recommended to do the setup wizard again.
Best regards,
Guilherme
Edited by: Guilherme Balbinot on Jul 15, 2011 8:37 AM
Edited by: Guilherme Balbinot on Jul 15, 2011 8:41 AM

Managed System Setup / Configure Diagnostics for Solution Manager itself

Hello,
I'm trying to run the "Managed System Setup" for the Solution Manager itself and
I got a problem in the step 4 (Diagnostics Configuration / Configure Diagnostics):
In the new opened window is only the ABAP stack displayed and the Java stack
is missing.
Does somebody know how to make the java stack visible?
From my point of view seems the configuration of the SMSY ok. The java stack is also
as "relevant" set.
The Solution Manger 7.0 EHP1 is on SP25.
Thanks in advance for your help!
Kind regards,
Joern

Hi Jorn,
I dont think its happening just because of your CR Content.
Still If you want to update it,then go to Administration Tab in SLD->>Import the latest CR Content from there.
As the latest CR Content is :SAP CR Content Version (sld/active): SAP_CR 7.6 (produced 11/17/2011)
And Jorn if you are stucked in the Diagnostic Agent registration then Go to Agent Candidate Administration->>In connection
Parameters Tab go to->>Custom SLD Connection Parameters->>Apply->>Mark the Diagnostic Agent you want to
connect->>Attach->>Give the password of the SMD_ADMIN->>Apply->>This way you will connect to the available Diagnostic
Agent.Hope this will help your problem.
Thanks & Regards
Ajitabh
Edited by: jitu001 on Dec 23, 2011 5:47 PM

Error While running Setup Wizard in SolMan Managed Systems

Hello,
I am getting the error listed below while I am trying to setup an Agent in SolMan Diag.
While I am running Setup Wizard, I am giving the message server port (50100) the same as I am getting from the systeminfo page: http://<My Server Name>:50100/sap/monitoring/SystemInfo.
When I change this port with 50104 which is my P4 port, It takes it and then gives me a message that "P4 port is unknown".
Any input?
Regards,
Ray
Failure with Message Server
An error occured while communicating with Message Server <My Server Name>:50100 through the host <My Server Name>: Error to retrieve the process from Message Server (detail: com.sap.bc.proj.jst
artup.impl.JStartupClusterControlExceptionImpl: The message server did not respond within 60 sec. Please check if the message server is running and if the socket connection has been established.); nes
ted exception is:
com.sap.bc.proj.jstartup.impl.JStartupClusterControlExceptionImpl: The message server did not respond within 60 sec. Please check if the message server is running and if the socket connection has bee
n established.(cause=com.sap.bc.proj.jstartup.impl.JStartupClusterControlExceptionImpl The message server did not respond within 60 sec. Please check if the message server is running and if the socket
connection has been established.)
Please check Message Server host/port, or enter the P4 ports in cluster table.

Hi furious
I have the same error , and finally I am find the solution, this error due to the enterprise admin permission, so go to main configuration tree (as shown on screenshot) click properties, click enterprise admin, click advance, again click enterprise
admin, click edit and select "this object and all descendant object" on Applies to option (as per screenshot) and select full control
after that you prepare your organization and It will works
cheers....................

System shows wrong product version in smsy and SMD Setup Wizard

Hi
We have a SOLMAN EHP1 SPS22 running. The Satellite systems are correctly registered in SLD, also the SOLMAN Fetchjobs is running successfully.
I wanted to run the SMD Setup for a NetWeaver ABAP system, when I click in the Setup Wizard on the System the following link is under Managed Products apears: [NOT DIAGNOSTICS RELEVANT] .
By clicking the link you get the products to be managed, but i only two products are for selection.
SAP ERP 6.0 and SAP FSCM 6.0.
In smys checked the assignment in Systems --> <SID> in the Header Tab I clicked Installed Product version. The List in the Pulldown menu in "Product" are the same as above: SAP ERP 6.0 and SAP FSCM 6.0.
I tried to assign the product manually with no luck. Running the Solman_setup for the Diagnostics did not solve the problem either.
Thanks for your help
Murat

Hi Stuart,
In SolMan, goto t-code SMSY-> Product Definitions-> Select any product.
On the right hand side, click on the button "System Roles"-> Click "Select Product".
Now activate the relevant product as required by clicking on the "Active" checkbox.
Hope this helps!
Regards,
Rinkal

Two choices for System Selection in SMD Setup Wizard

Hello,
we started to install the SMD. First everything was fine, but now we can select two agents for one system in the setup wizard.
The correct system is green lighted because the setup was successful. The other wrong system is not configurd and so the hole system in the overview is grey.
What did we wrong. Can anyone help us???
Thx
Thorsten

Hi,
Login in to solman smd,
Diagnostics Administration - Landscape Management - Select u'r solution- drill down to the instance & delete(right click).
That should do.

No P4 connection could be established to SID during managed systems setup

Hi,
I get the following error when executing managed systems setup Create Users request.
No P4 connection could be established to BJR
No configuration found for key (BJR/sapj2ee/msgserver/host). DETECTED Self-managing scenario. You need to first adapt the connectivity of Diagnostics Agent used for the Managed system BJR, before you could proceed with this setup. Therefore change the Agent connection type for the BJR relevant Diagnostics Agent to P4 Dispatcher, before you run again this setup. This connection update has to be performed in the Agent Administration under Agent Connectivity. You could access the Agent Administration from the Root Cause Analysis Work Center when logged as Solution Manager Administrator.
I have deleted and manually recreated SM_ADMIN_SOL, SAPSUPPORT and SM_COLL_SOL users, but still get the same issue.
Message server ports etc are correct. Screenshot below.
I have reviewed OSS note 1678469 but not resolved the issue.
Any ideas will be appreciated.
Regards
Tariq

Hi,
As stated please review how do you register dia agent in solution manager, you can check in step 4 assign diagnostic agent in solman_setup.
further review the below doc for dia agent registration via P4 port Diagnostics Agents - SAP Solution Manager Setup - SCN Wiki
Thanks
Jansi

Diagnostics System: Managed System Setup Wizard

Similar Messages

Maybe you are looking for