Update Nomination status table OIJNOMST

Hi all,
I need to update the nomination satus table OIJNOMST in an ABAP application. I cannot directly use the INSERT statement as some data processing which is done by the system will not be carried out. I have been informed there are some function modules for updating OIJNOMST. Can anyone tell what they are and how i can use them?
regards,
Hamza

please check these...
Function group                 Function group short text
Function Module Name           Short text for function module
OIJB                           OIL-TSW: Generate documents
OIJB_GET_NOMINATION_DATA       Read Nomination Data of TSW Tickets
OIJC                           OIL-TSW: Nomination/TS/Location
OIJC_GET_NOMINATION            OIL-TSW : Get the all the Nominations for a Given Nomination Number
OIJC_NOMINATION_UPDATE         OIL-TSW : Nomination posting function
OIJD                           OIL-TSW: Common DB access utilities
OIJD_GET_NOMINATION_STATUS     OIL-TSW : routine to get the status of the nomination for a TD shipmen
OIJ_GET_NOMINATION             OIL-TSW: Get nomination header + all items
OIJW                           OIL-TSW: Worklist
OIJW_GENERATE_NOMINATION_WL    OIL-TSW: Generate nomination worklist entries
OIJ_EL_DOCG                    Document generation functions for CIP
OIJ_EL_DOCG_UPDATE_NOMINATION Update nomination after document generation
OIJ_EL_DOCG_UPDAT_NOMINATION_N Update nomination after document generation
OIJ_NOM_GUI                    TSW: Nomination Presentation layer
OIJ_MAINTAIN_NOMINATION        TSW: Maintain nomination

Similar Messages

Performing check and potential update for status control table

Cheers Experts,
I searched in the forum, but I didn't find an answer.
I'm working on a 3.0B BW system.
After updating from PSA to an ODS, in the log I see the following line:
"Performing check and potential update for status control table" and double clicking on it, it says:
If data is loaded into an InfoCube, or existing data is edited (aggregated/compressed/deleted/got from a DataMart), then there is a change in the potential reportability of the data , or the possibility of deleting data by request, or of aggregating or compressing.
This status of each one of these Cubes is stored in a status table, that is updated when there is any change to the status of a request in the Cube.
The system now analyzes the requests in the Cube and compares the calculated status with the status table.
If deviations from the status table arise then you are given the option of adjusting the status table.
I have 2 questions:
1) What is BW doing, mainly because I'm working on an ODS and not an Infocube?
2) What can I do to reduce its execution time, since it lasts several minutes?
Thanks and greetings.
Roberto

Roberto, did you ever find an answer to your question? We also are experiencing long runtimes during this particular process running 3.x deltas from ODS to ODS and cubes.

Status control table - 'Perform update for status control table for cube '

Hello Experts,
While loading data to DSO, I am getting this message - 'Perform update for status control table for cube Z3MLQUA'.
What is status control table ? and can I have some inputs as to how to solve this issue
Regards,
arjun

Hi,
This message is not a issue in itself. It is just a SAP message which means that the system is checking/updating the system tables to carry out the operation whether it can be done or not.
If your loads are failing at this step or after this message there can be many reasons, check some of the possible reasons below
Performing check and potential update for status control table
Update from PSA error in Process Chain
problem in deleting request
Reporting not available ,even if Data is sucessfully loaded into DT
Hope this helps,
Kush kashyap

TSW Nomination Status codes

Hi,
In case of TSW Nominations items, there are 3 status active, inactive and deactive. The active and inactive status is stored in table OIJNOMST.
But is it possble to get the Deactivated status for a particluar nomination item by means of some function module table, etc???
Any pointers would be helpful.
Regards,
Mansi

Statuses of IDOCs---
See table TEDS1 for all status codes via SE16 in SAP. Outbound ALE Status Codes
Successful Transmission:
03 - Successful outbound transmission
12 - Dispatch OK
IDoc being processed:
01 - IDoc created
30 - IDoc ready for dispatch (ALE service) (Program RSEOUT00 needs to be executed)
ALE Error Messages:
02 - Error passing data to port
04 - Error within control information on EDI subsystem
05 - Error during translation
25 - Processing despite syntax errors (outbound)
29 - Error in ALE service
32 - Resubmit edited intermediate document (DO NOT USE)
Syntax Error Messages:
26 - Error during syntax check of IDoc (outbound) Inbound ALE Status Codes
IDoc Processed Successfully:
50 - IDoc added
53 - Successful posting
IDoc ready for processing:
64 - IDoc ready to be passed to application. The IDoc will be passed to the application by program RBDAPP01.
Errors in IDoc Processing:
51 - Error - application document not posted
56 - IDoc with errors added (You should never see this error code)
60 - Error during syntax check of IDoc (inbound)
61 - Processing despite syntax error (inbound)
63 - Error passing IDoc to application
65 - Error in ALE service - indicates partner profiles are incorrect
69 - IDoc was edited
Reward points if useful.

Update parent status based on all children status and sum of children amount.

Hi,
I need to write sql query for the following scenarios.
We have 3 financial systems (sys1, sys2, sys3) where a same transaction gets entered independently into each system OR entered into one and exported to the other system. Transaction need not be in all 3 systems.
We need to create reconcile report to see the status of transaction and display if it is reconciled or not. For this, in our stored procedure we are pulling data from 3 systems into temp tables and using CTE and other logic marking each transaction status
in each system temp table. One of the systems (eg sys1), we made it as source.
Sys1 temp table has both parent and child records and are distinguished using type. Sys2 and sys3 has only children records. When report is created, we are showing parent from sys1 temp table and
children from new temp table where children status is updated based on availability of it in all 3 systems.
DECLARE
@sys1 TABLE
ID int,
childID varchar(20),
ParentID varchar(20),
RecType decimal(3,0),
SettleDate smalldatetime,
Principal money,
Sys3ID varchar(16)
NULL,
Sys2ID int
NULL,
Status varchar(25) NULL
DECLARE
@sys2 TABLE
TxID int
PRIMARY KEY NOT
NULL,
CommonTransactionID varchar(16),
SettleDate smalldatetime,
Par money,
Sys3ID varchar(16) NULL,
Sys1ChildID,
Sys1ParentID bigint
DECLARE
@sys3 TABLE
Sys3ID varchar(16),
REFERENCE
varchar(16),
VALUE_DATE datetime,
DIRECTION char(1),
AMOUNT money,
RecSource varchar(2)
Insert Into @sys1 (ID, childID, ParentID, RecType, SettleDate, Principal)
Select 172876, 217955, 217954, 100, ‘2015-03-01’, 100.00
Union
Select 172877, 217956, 217955, 50, ‘2015-03-01’, 15.00
Union
Select 172878, 217957, 217955, 50, ‘2015-03-01’, 25.00
union
Select 172879, 217958, 217955, 50, ‘2015-03-01’, 10.00
Union
Select 172880, 217959, 217955, 50, ‘2015-03-01’, 10.00
union
Select 172881, 217960, 217955, 50, ‘2015-03-01’, 40.00
Insert Into @sys2(TxID, Sys1ID, settleDate, Par)
Select 4336620, 217956, ‘2015-03-01’, 15.00
Union
Select 4336621, 217957, ‘2015-03-01’, 25.00
union
Select 4336613, 217958, ‘2015-03-01’, 10.00
Union
Select 4336614, 217959, ‘2015-03-01’, 10.00
union
Select 4336615, 217960, ‘2015-03-01’, 40.00
Insert into @sys3(Sys3ID, Reference, Value_Date, Direction, Amount)
Select 1, ‘5654471 4336620’, ‘2015-03-01’, ‘O’, 15.00
Union
Select 2, ‘5654481 4336621’, ‘2015-03-01’, 'O',25.00
Union
Select 3, ‘5654491 4336613’, ‘2015-03-01’, 'O',10.00
Union
Select 4, ‘5654501 4336614’, ‘2015-03-01’, 'O',10.00
Union
Select 5, ‘5654511 4336615’, ‘2015-03-01’, 'O', 40.00
After going thru lot of other logic, final temp table will have only children with status assigned. The above temp table data is only for 1 scenario.
The following are status of children.
This is how status of children is determined:
Not Settled – All child records start as Not settled in temp tables.
Settled – when record exists in sys3 and other criteria is met.
Partially settled – record exists in sys3 and either in sys1 or sys2 or other criteria is not met.
Reconciled – child record should exist in all 3 systems and all criteria is match
Mismatched – record has wrong amount when compared in any of 2 systems.
**************** My Part below*******************
My part is to update the status of parent based on children status and parent amount must match sum of child amounts. If amounts don’t match, then leave the status of parent as null.
Determining the status of parent:
Not Settled – None of children has yet settled.
Settled – All children are settled.
Partially settled – some of children are as settled OR 1+ children are partially settled.
Reconciled – All children are reconciled.
Partially Reconciled – some children are partially reconciled.
Null – 1 or more childen has a status of mismatched.
AND sum of children amount should match parent amount
How can I update the status of parent based on all children and sum of amount of children equal to parent amount.
Thanks,
Spunny

>> We have 3 financial systems (sys1, sys2, sys3) where the same transaction gets entered independently into each system OR entered into one and exported to the other system. Transaction need not be in all 3 systems. <<
Your design is fundamentally wrong. In RDBMS, we want to have one fact, one way, in one place in the schema. The goal of all databases is to remove redundancy, not increase it. This not just SQL; this was true for hierarchical and network databases before them!
>> We need to create reconcile report to see the status of transaction and display if it is reconciled or not. For this, in our stored procedure we are pulling data from 3 systems into temp tables and using CTE and other logic marking each transaction
status in each system temp table. One of the systems (eg sys1), we made it as source. <<
You have re-invent the worst of 1970's file processing, but you want to use a temp table instead of scratch tape. This is not RDBMS or good SQL.
>> Sys1 temp table has both parent [sic] and child [sic] records [sic] and are distinguished using type. Sys2 and sys3 has only children [sic] records [sic]. When report is created, we are showing parent from sys1 temp table and children from new temp
table where children [sic] status is updated based on availability of it in all 3 systems. <,
The terms “child” and “parent” are not part of RDBMS. They come from network databases. You are building fake pointer chains we do have referenced and referencing tables. Or do you mean to model weak and strong entities? Where is the DRI actions?
These things are not tables! They have no keys, so they are called (garbage) piles. But even the garbage is wrong. There is no generic “id” in RDBMS; it has to be “<something in particular>_id” to be valid. Since you do not do math on it, it should not
be a numeric.
A “rec_type” is a nominal scale, so it cannot be a numeric either! Likewise, we have no generic “status”, but a status is state of being so it has to have a temporal dimension. And did you know that “reference” is a reserved word in SQL as well as another ISO-11179
violation.
The MONEY data type does not do correct math. Google it! It is another Sybase left-over that nobody should ever use.
Finally, you used the old Sybase INSERT INTO ..SELECT..), .. disaster instead of the ANSI/ISO Standard VALUES table constructor.
>> This is how status of children [sic] is determined: ..
My part is to update the status of parent [sic] based on children [sic] status and parent [sic] amount must match sum of child [sic] amounts.<<
Your narrative describes what Tom Johnston called a Non-Normal Form Redundancy. We do not put summary data in the strong entity; another basic data modeling principle. We build a VIEW that gives us the current summary. Your mindset is still in punch cards and
magnetic tape files.
"No matter how far you have gone down the wrong road, turn around!" -- Turkish proverb.
Can you start over and do it right?
--CELKO-- Books in Celko Series for Morgan-Kaufmann Publishing: Analytics and OLAP in SQL / Data and Databases: Concepts in Practice Data / Measurements and Standards in SQL SQL for Smarties / SQL Programming Style / SQL Puzzles and Answers / Thinking
in Sets / Trees and Hierarchies in SQL

Error while updating the status record of IDOC in SAP

Hi All,
I am facing this problem. I have done outbound processing and IDOC was sent successfully from SAP to EDI system and it was processed in EDI and now EDI system wants to send the status back to SAP with a status message and the status number that we are using is '24' and we have mapped all the fields in the status table EDIDS and made sure that EDI system sends all those and I think Counter field can not be determined by EDI system so EDI system used the counter '1' since it can not determine how many counters are already there in SAP and unless we pass the value to this counter field we were getting the error. After passing all the values the status of the IDOC is updated with the status '00' instead of '24' and we do not know why it is happened and I would like to know how SAP converts the status record that is received from the EDI system.
Please let me know how the status record will be translated into SAP from EDI system and I ahve followed basically EDIDS structure and the IDOC status is updating in SAP but with wrong status number and the alignemnt also missing in SAP fields like if I give some text in the EDI it is splitting and storing in 2 fields.
Please help me in this and I think I have explained the problem in a detail manner.
Thanks,
Ramesh.

Hi Naresh,
Thanks for the reply and my question is since EDI system is able to send the status back to SAP from EDI system and only problem is it is updatinf the status wrong and I have checked the EDIDS table also and the entry is creating with another counter and please confirm me that it is because of EDI does not support the status record update so that I can confirm to the client that there is nothing wrong in the way SAP functions and EDI system can not update the status code in the SAP.
Thanks,
Ramesh.

Error in updating custom database table using UPDATE SET Command

Hi,
I developed an automated collection system program in one of our clients simulating FBE1 (Payment Advice Creation) and F-28 (Posting of Incoming Payments) transaction codes. Upon posting, we encountered an error in PRD server wherein, for some of the posted items, the STATUS field in our custom table was not successfully updated. We tried to reverse the clearing document and debug the program. Upon posting, we were able to successfully update the status. We could not simulate the error in QAS since all the postings in QAS were successful and all status' relating to these postings were updated as well. We tried posting multiple times and the program seems to be working fine. In PRD, this behavior is just random and there is no specific pattern as to how the error occured. Provided below is the code I used for updating custom table ZFIACSF28. The STATUS field should be equal to '4' once the posting is successful. We are not sure if this is a database related issue. 7 users are authorized to do the postings in PRD and they are using the same user account.
CODE:
CALL TRANSACTION 'F-28' USING gt_bdcdata
                          MODE   'E'
                          UPDATE 'S'
                          MESSAGES INTO gt_messtab.
READ TABLE gt_messtab INTO wa_messtab WITH KEY msgtyp = 'S'
                                                 msgnr = '312'.
IF sy-subrc EQ 0.
update status for items cleared bearing the same OR Number*
    UPDATE zfiacsf28 SET status       = '4'
                         zsapdocument = wa_messtab-msgv1(10)
                         zruntime     = sy-uzeit
                         zrundate     = sy-datum
                   WHERE zor          = gv_zor
                   AND   customer     = gv_customer.
    COMMIT WORK.
ENDIF.

Hi,
it's not possible that status isn't updated in zfiacsf28 while date and time are updated there, because it's hard coded.
There must be other programs that also change your table zfiacsf28 and maybe clear those fields. Maybe the key fields zor and customer cannot provide duplicate access, what is the meaning of field zor ?
Please check the where used list of table zfiacsf28 to find other update programs.
Regards,
Klaus

Field TSABR is not getting updated in MHIS table.

Hi All,
The field TSABR (Scheduling Status: New Start Called) is not getting updated in MHIS table.
Please do tell me how it will get updated.
What is a logic behind it.
Many Thanks in advance.
Regards,
Sanjay Tiwari

Hi,
I checked it my system and that field was getting updated ..
For calls with status "New start called " will get updated in MHIS and for these call you will only have the field scheduling status :planned date called " as marked . pls check
regrds
pushpa

User Exit to update user status at VA01/VA02

Hi Expert
Please help identify any User Exit to update User Status stored in tables (JSTO/JEST), at time of sales order (Business Object 2032) creation / change.
Requirement is to set check mark on a specific user status in case of a material master is missing HTS code.
Regards-Aamir

Hi,
If your requirement is to set the check the HTS field in the material master, you can make the field as Mandatory without which the Material cant be saved
You can make this field mandatory in OMS9 transaction code with field status as 89 and the field is MARC-STAWN
Please revert if you need more details
regards,
santosh

STATUS_UPDATE error to update USER STATUS - Update termination error

Hi All,
I am using status_update FM in sales order user exit MV45AFZZ in a perform routine for updating user status in line item for sales order. There are 4 custom statuses created for the sales order line item. 1,2 3, and 4 by configuration. My job is to select one of those based on user selection.
Scenario: During change order process using VA02, I have to change the existing status to a third status when user selects the second one. That is for example, in VA02, user selects status 4 from previous status 3, and save, I have to make the status 4 inactive and save the new status 2 instead of 3 though user selected 3. How do I achieve this.? ????Any programming example is really appreciated. Thanks!!!
I am right now using STATUS_READ and reading the existing status 4. Then making it inactive using status_update FM. And updating the new status 2 as active one and 3 as inactive again. Two inactive updates and one active update is throwing an update termination error while saving the sales order.
Any help is really appreciated.
Thanks
Ricky

Hi ricky,
For saving any changes you need to have a Z-table.
In programs we can't store the user selection. In your case you can create a z-table and store the status there and delete the last status. The process would be faster as you will always have one record in the table.
. One more advantage is you can even track the changes through the Z-table(User who is changing it.)
Hope this solution will surely help you.
Cheers
Suvi

CLEAN_REQREQ_UP not updating the status of all confirmations.

Hello All
We have scheduled the cleaner report as a job running every 2 minutes.
This job changes the status of the confirmations from 'Approved' to 'Transmit to backend system'.
However the job doesn't process a few confirmations randomly.
In such confirmations, the status remains as ' Approved'.
There is no issue for replication for such confirmations in the backend.
This happens on 30 % of all confirmations.
All these confirmations are coming from an interface and the following sequence occurs
1) MFG Batch user creates Confirmation in SRM
2) WF Batch user sets the status as Approved
3) Job Batch user( CLEAN_REQREQ_UP) updates the status to 'Transmit to Backend system'
I am trying to find out why the job wont process these confirmations.
Regards
Kedar

HI
for eg,
when we do confirmations in SRM
message type MBGMCR and RFC takes GOODS CONFIRMATION / SERVICES data to .ECC
and BBP_GET_STATUS_2 job bring the informations of ECC GR status and update in SRM.
bbp_docuemnt_tab get entries of srm confirmation data and clears clen req up table (po+confirmation number).
clean job must clean this PO+confirmation line in the bbp_docuemnt_tab table.
check your PO number in BBP_DOCUMENT_TAB TABLE.
i need to check it up.
br
muthu

Unable to update when executed, table gets lock Execution does not stop Execution even for an hour

Following is my Query unable to update when Executed table gets lock Execution does not stop even for an hour.
update Employees
set Status = 'Close'
where statusid IN (select statusid
from MyView
where DownloadedDate ='2014-07-27 00:00:00.000'
here Employee contains 3,00,000 of records and Subquery return 1,50,000 Empid
i tried in various ways but not able to solve, statusid column have no index on, i tried using cursor but it does not work.
plz let me know how to solve this Issue, THANKS IN ADVANCE.

Hello,
You should better post your question to a more related Forum, like Transact-SQL or SQL Server Database Engine; this Forum is for samples & community Projects.
Have you checked the execution plan if indexes are used?
You could update the data in chunks, e.g. 10.000 rows per execution. For this you have to add a TOP clause and a filter to update only those, who are not updated yet.
update TOP (10000) Employees
set Status = 'Close'
where statusid IN
(select statusid
from MyView
where DownloadedDate ='2014-07-27 00:00:00.000')
AND Status <> 'Close'
Olaf Helper
[ Blog] [ Xing] [ MVP]

Unable to update, when executed table gets lock and Execution does not stop even for an hour.

Following is my Query, which unables to update. When Executed, table gets lock and Execution does not stop even for an hour.
update Employees
set Status = 'Close'
where statusid IN (select statusid
from MyView
where DownloadedDate ='2014-07-27 00:00:00.000'
here Employee contains 3,00,000 of records and Subquery return 1,50,000 Empid
i tried in various ways but not able to solve, statusid column have no index on, i tried using cursor but it does not work.
plz let me know how to solve this Issue, Its very Important to get solve as all my further work depends on Updation
, THANKS IN ADVANCE.

See also your other thread with the same question:
http://social.msdn.microsoft.com/Forums/en-US/80243625-fc3b-4ee1-bce1-4adcdbc16c14/unable-to-update-when-executed-table-gets-lock-execution-does-not-stop-execution-even-for-an-hour?forum=sqlserversamples
Olaf Helper
[ Blog] [ Xing] [ MVP]

How do I update the result table ?

I am having problem to design and update the competition results in WPC_RESULTS table.
I have 3 tables
1. WPC_COMPETITION - It has details of the competition to be conducted.
2. WPC_MEMBERS - Member details.
3. WPC_RESULTS - Competition results which will have Member_ID, Competition_ID and Status.
In Region 1. I have a drop down list from which I can select the Competition.
Problem is with region 2.
==================
In Region 2. I plan to have All the Member's Name from WPC_MEMBERS, a Status column (W=Win or L=Lost or X=NotPlayed) from WPC_RESULT which can be updated. But the table WPC_RESULTS dosenot have a primary key but has 2 foreign key one from WPC_COMPETITION and one from WPC_MEMBERS.
I am just not able to plan & create this region 2.
Can someone login to my wokspace and give me a helping hand.
Please mail me at [email protected] and I would give you the password for my workspace.
Regards,
Nikhil Karnik

My problem is since the WPC_RESULT table has two master tables. I cannot use a Master Detail form.
What I am trying is,
On a form which displays all the member in WPC_MEMBERS, Drop down list of competition name from WPC_COMPETITION table and a there should be checkbox for status column of WPC_RESULT. So my challenge is to update the WPC_RESULT table with the respective member id and competition id and status in WPC_RESULT table.
As you said I can use a PL/SQL, but I could not understand how do create my PLSQL block to identify each member on the form and update the competition status associated with that member.
in short the table definition is like
CREATE TABLE "WPC_COMPETITION"
(     "COMPETITION_NAME" VARCHAR2(100),
     "COMPETITION_CODE" NUMBER,
     "DATE_CONDUCTED" DATE,
     CONSTRAINT "WPC_PK1" PRIMARY KEY ("COMPETITION_CODE") ENABLE
CREATE TABLE "WPC_COMPETITION"
(     "COMPETITION_NAME" VARCHAR2(100),
     "COMPETITION_CODE" NUMBER,
     "DATE_CONDUCTED" DATE,
     CONSTRAINT "WPC_PK1" PRIMARY KEY ("COMPETITION_CODE") ENABLE
CREATE TABLE "WPC_RESULTS"
(     "COMPETITION_CODE" NUMBER,
     "STATUS" VARCHAR2(1),
     "MEMBER_ID" NUMBER
ALTER TABLE "WPC_RESULTS" ADD CONSTRAINT "WPKD_FK1" FOREIGN KEY ("COMPETITION_CODE")
     REFERENCES "WPC_COMPETITION" ("COMPETITION_CODE") ENABLE
ALTER TABLE "WPC_RESULTS" ADD CONSTRAINT "WPKD_FK2" FOREIGN KEY ("MEMBER_ID")
     REFERENCES "WPC_MEMBERS" ("MEMBER_ID") ENABLE
/

Issue in updating nomination

hi All
I am using a Z program for changing the existing nomination and to peg the new line item added to nomintaion with the existing line item .
i have used function module OIJPEG_GROUP_ITEMS to peg the items .This function module generates the temporary peg ID . I am using a
OIJPEG_GROUPING_SAVE to geenerate a convert the temporary peg ID into a new one and OIJPEG_GROUPING_UPDATE to update the database.
The probelm is all the tables etc are getting properly updated. I am getting a new peg ID also which is getting updated in OIJPEG table but In the Nomination , the items are not showing as pegged. Do i need to do something elso also.
Any pointers will be helpful.
Thanks .
Nitin .

Andy
When user first lands in this page, the first row would be highlighted and cursor positioned
at Salary field. Which means that particular row's LOV1 values would be populated.
On change of LOV1, LOV2 gets populated. So whenever user make changes on a row and submits, that
particular row would get updated. Rest all rows would be having Null as LOV1 and LOV2.
And yes, user has to go to that particular row to see that row's LOV1 value. He can click directly
to LOV1 or at any other columns of a row, this would highlight the row and populates LOV1 values (this happens becoz of setLOV1 in Highlightrow fn and onfocus on Volume.)
Actually the last case, we just added to populate LOV1 whereever user clicks on particular row.
If you have easy approach, please share.
Crucial problem is on updating the records. This happens specifically in NOTESTOROW function (i guess)
Because when we come over to Comments Textarea the id changes to f02_0002 when onkeyup on Comments.
You can refer it by removing the comments on alert msg in VALIDATEFORM function.
Please suggest.
Thanks
Vijay

Update Nomination status table OIJNOMST

Similar Messages

Maybe you are looking for