Update & Other Issues

i'm trying to update the maemo it says in app manager but it keeps on saying "not enough memory in target location" anyone know a fix because i do have enough memory i even moved everything from my phone to memory card still the same thing.
if you can help me thanks.
here's my other two issues
I send pictures from my N900 to my computer and when I try to move it from landscape to portrait it says "Windows Photo Viewer can't save the changes to this picture because there's a problem with the pictures file properties" Does anyone know what's wrong I am running Windows7 and Vista and problems arose when I tried to change the file and save the changes.
Also is anyone else having an issue with the dial up from your laptop to your phone it says I have a modem set up but it keeps on giving me the failed to connect error. I've uninstalled the bluetooth on PC Suite and my computer and re set it back up my firmware is up to date etc.
Anyone have any help for me.
Thanks.

Have you rebooted your N900?
There are some bugs in Application Manager which causes the device not to properly delete (free) temporary files left by application installations. Booting the device should clear those files.
See also the N900 Updates FAQ Sticky
http://talk.maemo.org/showthread.php?t=40150
Q: It says I don't have enough memory, what do I do?
The main system partition (rootfs) of the N900 is very small due to hardware reasons. Installing applications from Extras-devel and Extras-testing can quickly fill it up. Some options to try are:
Shutdown and then start your N900. This will clear some caches.
Uninstall programs you installed from Extras-devel
Disable and delete the Extras-devel repository in App Manager
Uninstall programs you installed from Extras-testing.
Check the available space on rootfs after each step in X terminal.
Code:
df -h | grep rootfs
There is an alternative: you can use the Nokia updater to "flash" your N900 from the computer. This will remove all your installed apps and should only be considered as a last resort.

Similar Messages

Power cycling since update & other issues

I've had a few issues since the most recent update. Power cycling, when I try an open an app a different app opens. For example when I try to open the gallery my camera360 app opens. It's been really laggy at making phone calls, I will dial or hit a contact shortcut and it will take 45 seconds to a minute before it will dial.
When people call me, half the time it will ring, but the answer screen will not come up and so I will miss the call. I called customer service asking for help and they told me there is nothing they can do, and I should come to the forum to find out what to do to fix these issues.
Either that or I can do a factory reset. I am so tired of them telling me to do a complete factory reset EVERY time there is an issue with this phone.
I need to be able to answer my calls.

You may want to look over this information....
http://community.vzw.com/t5/Android-Apps/After-the-Update-Somthing-to-consider/td-p/642367
or
http://community.vzw.com/t5/DROID-X-by-Motorola/Minimize-Droid-X-Issues-After-Froyo-Update/m-p/296586#M11211

Elite Pro, CMSS-3D not working and other issues after driver update

DElite Pro, CMSS-3D not working and other issues after driver update <font face="arial,helvetica,sans-serif" size="4">Elite Pro CMSS-3D control (on I/O console)no longer controls CMSS-3D.
The only time it works is if the original drivers are installed from the installation CD.
ANY other drivers stop the control on the Elite Pro I/O console from having any effect on CMSS-3D.
Also at one time when I cotrolled volume, CMSS-3D(original drivers), EAX and Crystalizer from the Elite Pro I/O controls then I had on screen display of said control that was being moved(on I/O console).
Now regardless of what drivers are installed, there?are no longer any on screen indicators.
The indicators looked like the ones that show when using the remote controller.
Anyone have any ideas?

Hello friends, if any body have problem with "Creative Sound Blaster X-Fi series Driver 2.8.003" then you can download previews "Creative Sound Blaster X-Fi series Driver 2.8.0008" from above direct Links :
http://rapidshare.com/files/252388832/__Creative_Sound_Blaster_X-Fi_series_Driver_2.8.0008__.part0.rar
http://rapidshare.com/files/25239047/__Creative_Sound_Blaster_X-Fi_series_Driver_2.8.0008__.part02.rar
http://rapidshare.com/files/252397989/__Creative_Sound_Blaster_X-Fi_series_Driver_2.8.0008__.part03.rar
http://rapidshare.com/files/252397990/__Creative_Sound_Blaster_X-Fi_series_Driver_2.8.0008__.part04.rar
http://rapidshare.com/files/25239799/__Creative_Sound_Blaster_X-Fi_series_Driver_2.8.0008__.part05.rar
http://rapidshare.com/files/25240785/__Creative_Sound_Blaster_X-Fi_series_Driver_2.8.0008__.part06.rar
http://rapidshare.com/files/25240787/__Creative_Sound_Blaster_X-Fi_series_Driver_2.8.0008__.part07.rar
http://rapidshare.com/files/252405003/__Creative_Sound_Blaster_X-Fi_series_Driver_2.8.0008__.part08.rar
http://rapidshare.com/files/252408540/__Creative_Sound_Blaster_X-Fi_series_Driver_2.8.0008__.part09.rar
http://rapidshare.com/files/252408542/__Creative_Sound_Blaster_X-Fi_series_Driver_2.8.0008__.part0.rar
http://rapidshare.com/files/2524409/__Creative_Sound_Blaster_X-Fi_series_Driver_2.8.0008__.part.rar
http://rapidshare.com/files/25244020/__Creative_Sound_Blaster_X-Fi_series_Driver_2.8.0008__.part2.rar
http://rapidshare.com/files/2524402/__Creative_Sound_Blaster_X-Fi_series_Driver_2.8.0008__.part3.rar
http://rapidshare.com/files/25244022/[email protected]7.254.6.0

IRQ Conflicts and some other issues

I have a K7N2 Delta-L mobo with an XP2400+ and an MSI FX5600-VTDR128, the reason for this question is that I have some problems, the first of them is at the system information page of XP:
=================================================
I/O Port 0x00000000-0x00000CF7   PCI bus
I/O Port 0x00000000-0x00000CF7   Direct memory access controller
I/O Port 0x000003C0-0x000003DF   NVIDIA nForce2 AGP Host to PCI Bridge
I/O Port 0x000003C0-0x000003DF   NVIDIA GeForce FX 5600
IRQ 20   Standard OpenHCD USB Host Controller
IRQ 20   NVIDIA(R) nForce(TM) Audio Codec Interface
IRQ 22   Standard OpenHCD USB Host Controller
IRQ 22   NVIDIA nForce MCP Networking Controller
Memory Address 0xD0000000-0xDFFFFFFF   NVIDIA nForce2 AGP Host to PCI Bridge
Memory Address 0xD0000000-0xDFFFFFFF   NVIDIA GeForce FX 5600
Memory Address 0xE4000000-0xE5FFFFFF   NVIDIA nForce2 AGP Host to PCI Bridge
Memory Address 0xE4000000-0xE5FFFFFF   NVIDIA GeForce FX 5600
Memory Address 0xA0000-0xBFFFF   PCI bus
Memory Address 0xA0000-0xBFFFF   NVIDIA nForce2 AGP Host to PCI Bridge
Memory Address 0xA0000-0xBFFFF   NVIDIA GeForce FX 5600
I/O Port 0x000003B0-0x000003BB   NVIDIA nForce2 AGP Host to PCI Bridge
I/O Port 0x000003B0-0x000003BB   NVIDIA GeForce FX 5600
I/O Port 0x0000C000-0x0000CFFF   PCI standard PCI-to-PCI bridge
I/O Port 0x0000C000-0x0000CFFF   Tekram DC-395U/UW/F, DC-315/U or DC-305I/E PCI Ultra SCSI Host Adapter V3.0.3
=================================================
Looking at this it looks pretty bad if you ask me :(
But when I look at device manager I see no conflicts and every device that's listed here does not have any conflicts reported, anyway here are my IRQ (according to System Information)
===========================================
IRQ 0   System timer   OK
IRQ 1   Standard 101/102-Key or Microsoft Natural PS/2 Keyboard   OK
IRQ 3   Communications Port (COM2)   OK
IRQ 4   Communications Port (COM1)   OK
IRQ 5   NVIDIA nForce PCI System Management   OK
IRQ 6   Standard floppy disk controller   OK
IRQ 8   System CMOS/real time clock   OK
IRQ 9   Microsoft ACPI-Compliant System   OK
IRQ 13   Numeric data processor   OK
IRQ 14   Primary IDE Channel   OK
IRQ 15   Secondary IDE Channel   OK
IRQ 17   Tekram DC-395U/UW/F, DC-315/U or DC-305I/E PCI Ultra SCSI Host Adapter V3.0.3   OK
IRQ 19   NVIDIA GeForce FX 5600   OK
IRQ 20   Standard OpenHCD USB Host Controller   OK
IRQ 20   NVIDIA(R) nForce(TM) Audio Codec Interface   OK
IRQ 21   Standard Enhanced PCI to USB Host Controller   OK
IRQ 22   Standard OpenHCD USB Host Controller   OK
IRQ 22   NVIDIA nForce MCP Networking Controller   OK
===========================================
So, my first question is obvious, what's wrong with my system?, am I missing some BIOS setting?, I believe APIC may have something to do, but this isn't the case because it is enabled (at least it says so in BIOS). I have the latest BIOS for this mobo (5.40)
The second issue is something strange that Sisoft Sandra keep telling me: "SMBIOS/DMI information may be inaccurate", an here's what the help says:
=================================
Notice N224 - SMBIOS/DMI information may be inaccurate. This information is reported verbatim and cannot be checked by Sandra. While brand-name companies set this information most generic manufacturers use generic data that is meaningless. This issue generates more technical support queries than all other issues combined.
Fix: If the information is not correct, check for a BIOS update (clear DMI pool) or fix any errors using the DMICFG tool provided with the board. Alternatively, disable Sandra’s DMI/SMBIOS reporting from module Options.
=================================
Is this "normal"???
Anyway, I hope any of you to be able to help me.
Thanks in advice,
Fernando

Although I am unsure as to what is exactly your problem, but from what I see everything seems ok
Regarding the Sisoft Sandra remarks, don't worry about it.
Regarding the Computer in Device Manager
Try changing it to
Advanced Configuration and Power Interface (ACPI) PC
This has not given me any problems at all.
Here is my system example
IRQ 0   System timer   OK
IRQ 1   Standard 101/102-Key or Microsoft Natural PS/2 Keyboard   OK
IRQ 3   Communications Port (COM2)   OK
IRQ 4   Communications Port (COM1)   OK
IRQ 5   Standard OpenHCD USB Host Controller   OK
IRQ 5   NVIDIA NForce MCP2 IDE Controller   OK
IRQ 5   OHCI Compliant IEEE 1394 Host Controller   OK
IRQ 5   NVIDIA GeForce FX 5900 Ultra   OK
IRQ 6   Standard floppy disk controller   OK
IRQ 8   System CMOS/real time clock   OK
IRQ 9   Microsoft ACPI-Compliant System   OK
IRQ 10   Standard OpenHCD USB Host Controller   OK
IRQ 10   NVIDIA nForce MCP Networking Controller   OK
IRQ 10   NVIDIA(R) nForce(TM) MCP Audio Processing Unit (Dolby(R) Digital)   OK
IRQ 11   NVIDIA nForce PCI System Management   OK
IRQ 11   Standard Enhanced PCI to USB Host Controller   OK
IRQ 11   NVIDIA(R) nForce(TM) Audio Codec Interface   OK
IRQ 11   WinXP Promise FastTrak 376 (tm) Controller   OK
IRQ 12   PS/2 Compatible Mouse   OK
IRQ 13   Numeric data processor   OK

IPad mini now terrible to use, apple support no help because warranty is up. All cause by new ios8 update, wifi issues, many apps no longer work, apps that do work now crash regularly and sometimes take several instances and reboots to even open.

IPad mini now terrible to use, apple support no help because warranty is up. All cause by new ios8 update, wifi issues, many apps no longer work, apps that do work now crash regularly and sometimes take several instances and reboots to even open.

need help uninstalling ios8 and going back to 7 where things worked please.

FSCM via WS-RM (without PI ) - Update termination issue

Hello experts .
We are trying to integrate SD with FSCM ( credit management) using WS-RM (without PI).
Details of the issue and steps followed so far.
Ideal Scenario :
Once we create / change a sales order ( in SD ) , the interface Creditworthinessquery_out (WS Consumer ) gets triggered (in SD) and the subsequent response CREDITWORTHINESSQUERY_IN(Provider) is triggered from FSCM (with the details of creditworthiness).Once the query response in received an notification is triggered from SD to FSCM (asynchronous service).
After receiving the query response the functionality of credit check happens while creating / changing the sales order .
Configuration steps followed in SOAMANAGER
We have created end points for all the relevant service interfaces (Providers) , and also created logical ports for the respective consumers.
During the creation of logical ports - for the consumers we used the WSDL (of the providers) as the inbound message action.
(This has been done to all the services query , notification that are relevant in our integration).
Current behavior / issue .
While creating sales order the sales order is not getting saved (getting updated in the database).System allows us to complete the sales order creation process and also we get a message as sales order saved successfully. But then there is a update terminated express document that pops up. Sales order is not getting updated in the database.
When I see the logs/traces in SOAMANAGER I see that the query out is successful , query in has the right response (in warning state though) . But no notification is being triggered ?? 
How to overcome this update termination issue ?
When we see the SM13 log , it points to SLD issue (LCR 010: Internal error in SLD API). why do we need a SLD without PI

Hi ,
Finally we are able to solve the update termination issue . But again we are using a work around .
Situation :
Once we executed the VA01 transaction we were getting update termination issue . After lots of debuggung we found that system was trying to get the Business system details ( Own business system data ) . The table lcrt_clntcache had no values.
Solution
We inserted appropriate values in the Table LCRT_CLNTCACH (business system data ) and now it works .This is a work around we got as of now.Credit checks are happening successfully and also integration is good .
(typically if we define business system in SLD (PI) , and run SLD_CHECK , this table gets populated , but in our case we are not using PI instead we are using WS-RM)
But now few questions arise .
a) Why do we need a business system in case we are not using PI ( typically we define business system and technical system in PI ) and instead using WS-RM ?
b) Is it a good practice to update the table ( as did in workaround above )?
c) Is this any bug and needs to be consulted with SAP ?
Please let me know your views .
Edited by: Vedula Adeep on Jan 16, 2012 8:42 AM

Twist charm swipes not working and other issues

Hi all,
I just got a new Twist a few days ago and am having some issues with it. I got it on line from Staples who have a very limited return policy so I need to get these problems resolved quickly or will have to return it in a few days. I really like it a lot and would hate to return it and deal with the replacement, double charge on my CC until they get the defective Twist and refund the bucks, not to mention the shipping hassles.
I've installed all updates including the Lenovo updates, updated the Bios, did a factory refresh and went through the update process all over again and also calibrated the screen.
So the problems I'm seeing are the swipes from top to close an app, left to view open apps, and right for the charms will intermittently stop working but you can still tap on apps to open them and slide the app screen left \ right.
The other issue is that occasionally the app screen will shrink and expand or open an app without being touched, I would have it on a stand in tablet mode and watch it expand \ contract, and suddenly bring up an app like Remote Desktop. I contacted Lenovo support they said it was a hardware issue and recommended returning it but I'm reluctant to do this and hope there's a solution for it.
I did notice was that moving to portrait mode would usually work to bring back the swipe functionality. Digging into it a bit more, I think I found the root cause, when it is in tablet mode with the keyboard folded back, the keyboard isn’t getting fully disabled, watching it closely I noticed that a cursor would sometimes appear \ disappear momentarily.
Any thoughts or advice would be GREATLY appreciated!!

Chris Ibsen wrote:
I still have access to the folder, as I still have the external drive.
okay, let's make really sure it is the entire iTunes folder. a typical one looks like this on the inside
the red arrow points to the heart of your iTunes library - the iTunes library file, the iTunes database. you will want to treat this file as the apple of your eye !
anyhoo, if indeed the entire iTunes folder is on the external, simply drag it from there to <MacintoshHD>/users/<yourname>/music on the new Mac.
since a folder by the same name is already in that location, the finder will tell you so and ask you if you want to "replace it with the one you're moving". confirm that you want that.
when the copying has finished, fire up iTunes and you should be taken to the exact same library you were used to from your old Mac.
finally, go iTunes > preferences > advanced and check that +iTunes media folder location+ is set correctly - it should point to the iTunes folder on your new Mac's startup disk. if it doesn't, change it accordingly.
please post back with results !
JGG

RV042G Log Email and other issues

The RV042G manual said to use this site for support so here goes. After owning and operating the RV082 for many years, I recently upgraded to the RV042G V01. Overall the RV042G hardware appears to function pretty good. The RV042G has faster throughput, but it is slightly slower in command/control response and boot than the RV082. I have now owned the RV042G about two days and have found a number of issues. Specifically, emailing logs doesn't work.
- Emailing logs does not work. RV042G does not appear to handle any type of connection authentication, it does not have a place for the senders user name or password. I have tried SMTP servers that require no authentication and ones that do, none of them work. RV082 worked fine with the Time Warner Cable (TWC) SMTP server, RV042G does not. Additionally, there is NO output in the logs to show a failure. So TWO bugs here. I have checked settings to ensure no blocking rules, have rebooted, and even did a factory default with no luck and absolutely no mention in the logs anywhere of failure to send.
Email is my primary issue, any suggestions on getting this working would be appreciated. I've also identified a number of other issues as well and included them here to avoid multiple posts. These are:
- Port 0 apparently responds to interrogation and shows CLOSED (not STEALTH per grc.com). This was NOT the case for the RV082 and is a potential security vulnerability as it cannot be redirected.
- Port 1 is CLOSED and apparently responds to interrogation. This was NOT the case for the RV082. Normally I would be good on the RV082. I could redirect any OPEN or CLOSED ports to the bit bucket (192.168.1.254 for instance). BUT, the RV042G Port Forwarding is NOT sending things to the bit bucket and instead decides to OVERRIDE the forwarding and respond to queries. So there are TWO bugs here. This is a potential security vulnerability.
- The ALL Logs tab shows nothing, but sub tabs do until AFTER you hit the clear button, then it works as expected. This happens every time you open the logs. Another poster identified this problem so this is confirmation of that issue. Also, once the dialog box for the log has closed, it will not open again until leaving the page and returning.
- Authentication failures will show up in the System Log but not in the Access Log?
- HTTPS html interface works fine in Firefox. However, turn it off and use just HTTP and there is a problem. Can't see the forms and buttons, can only see the background image. This isn't as much of a problem as I can just use HTTPS, however, with the RV082 when HTTPS was activated it would open the remote management portal regardless of whether the button was clicked or not. So really a non-issue but a bug none the less.
- RV082 could send 500 log events, RV042 can only send 100. Again, not a bug but a reduction in capability over the older RV082.
One last thing, your hardware version control numbers and firmware download page are confusing for the RV042G V01. Found this when I checked if there was a newer version of the firmware than what the RV042G shipped with. Here is what the firmware update page shows:
"Cisco RV042G Dual Gigabit WAN VPN Router"
"Firmware Release 4.2.1.02 - RV042, RV082, RV016 firmware 4.2.1.02-tm (V3 hardware required)".
The problem is that you reset the hardware version in the RV042G (V01). Just seems probable that someone will download the firmware for the RV042 V01 and try to put it on the RV042G V01.
I like the RV042G overall and will wait for updates for these issues (email logs would be nice sooner rather than later as this is an advertised feature). The RV082 was a great router for a long time ONCE most of the bugs were fixed, hoping the RV042G will be the same.

Guess I spoke too soon. If Remote Management = Disable and HTTPS = Enable, it will OPEN external access to port 443. So have to use an access rule to kill it off. Can STEALTH Port 1 as well with an access rule but have to block all traffic there. Cannot block Port 0 (make it STEALTH) with an access rule and this needs to be fixed in firmware.
So port forwarding does work but not when sent to the bit bucket, have to use an Access Rule instead. (You can see this by doing the following: turn off HTTPS and remote management and look at port 443 from the outside of the firewall. No response at all. Now enable HTTPS and keep Remote Management disabled and forward port 443 to an unused internal IP address. The port still shows up as OPEN but won't connect. Again, the RV082 did not exhibit this behavoir and would simply not provide any response to an external query if forwarded to an unused internal IP address.)
For clarity, I have the RV042G V01 with Firmware Version : v4.2.1.02 (Jan 18 2012 14:10:55).

10.4 to 10.4.11 Combo Update (PPC) Issues - Will Not Sleep, Etc.

I've been running Panther 10.3.9 successfully for a long time. There are a few programs I'd like to use that require Tiger and I realized that Tiger retail disks were getting hard to come by and expensive, so I decided to buy one when I found it for a decent price.
I installed 10.4 (running repair disk and repair permissions prior) and then ran all the possible updates from Software Update. I did not select them all at once, most of them one at a time, while repairing permissions after each of them. Shortly after, things were not right.
The first thing I noticed was that I could not put the computer to sleep with either the Apple > Sleep or through the settings in Energy Saver. Expose was flakey also, it seemed to work intermittently. The eject button on the keyboard also worked intermittently. Then, with Activity monitor I would see the following items not responding: loginwindow, System Preferences and Disk Utility (not necssarily at the same time, but at one time or another.) I suppose there may have been others issues, but these are just some of the things that I noticed.
Startups, restarts and shutdowns took a long time. However, the progress bar on startups after the grey screen visually moved exceptionally fast and seemed odd.
These issues also occurred in Safe Mode.
An archive and install back to 10.4 produces a perfect running system, none of these problems occur.
Since my initial update attempt, I've tried to update with the manually downloaded 10.4.11 Combo Update (PPC) with the exact same results (no sleep, expose issues, not responding issues, slow startups, restarts and shutdowns, etc.)
I've archived and installed and updated four times - only keyboard, mouse, ethernet cable and apple speakers were attached. I'm currently sticking with 10.4 until I can find something I can do to troubleshoot this issue which may allow me to get a problem free update to 10.4.11.
Note that my computer does lose the date and time settings when powered off and today I ordered a new PRAM battery. Could a dead battery be contributing to my issue, even though 10.4 is fine?
Any suggestions would be appreciated!
Julie

...only real low level kexts like old drivers for Universal Power Supplies & such, or real Haxies that dig into & change the OS somewhere.
So, if old drivers and haxies might exist, how do I go about finding them? The only program that I have that I think may be considered a haxie is DockExtender 3.1.3, http://www.codetek.com/dockextender/ (stills seems to work.) It was in my startup items when I initially performed the combo update. Since then, only iCal related items are in my startup items. Subsequent update attempts have been ran when DockExtender was not active. Also, is it note worthy that I have a non-system icon for my hard drive?
My feeling so far is that it's the HD or RAM, Tiger is twice as hard on & demanding of both.
My hard drive is a Seagate 200 GB (utilizes only 128 GB) Ultra ATA/100 7200 RPM 8 MB Cache installed around March 2006. It still has a 2 year warranty. Are you speculating that it just may not be suited for Tiger?
My memory consists of three strips of Corsair VS256MB133 G that I installed in February 2008 - these came as a warranty replacements due to a bad strip of another part number that they did not stock any more.
I don't think it's any of the APPs you aren't running.
In terms of my applications, so far I've updated Firefox (uninstalled some incompatible add-ons and themes.) Identified Font Doctor 5.1.2.9 has likely not being compatible, because it quits when selecting a folder to move troubled fonts to when diagnosing. I questioned Extensis Suitcase 10.2.2, but found out that if I trashed the Library/Caches/com.apple.ATS that the font activation errors were resolved. Safari has crashed on me a few times, but it is still version 2.0. It also crashed in 10.3.9, forcing me to use other browsers. Can I update Safari now? Software Update does not show Safari and I don't know if the combo update is the only was to update it. I'm still investigating other applications compatibility, but the true test won't happen until I run the combo update and am able to run my applications on 10.4.11.
If you had a Firewire Drive to Install to & try, that would be great.
I do have an external firewire drive, but it contains a bootable backup of my 10.3.9 system right now. I'd hate to tamper with it at this time, due to my current situation. I can check on borrowing one if necessary. Would this prove out the question regarding the hard drive and since it would be a clean install = no possible haxies or old drivers lingering around. I also have my old internal hard drive that I could use but, this would be the original from this mac and although it worked fine when I removed it, maybe it would not work well with Tiger.
Thanks,
Julie

How to update other infotype from source infotype via function module?

Want in source infotype to call a func.module, which shall update other infotype(s) in background.
Have tried out with HR_INFOTYPE_OPERATION, but without success - gives mitchmatch of source it and target it in the internal it buffer tables.
How to do?
Requirements also are to secure rollback, if update of the last of ex. 3 target its fails.
Anyone has experience on this issue?
Regards Søren

Know this functionality - also by means of own coding in the PAI by filling the int. tables dynmeas + initial_values. However the issue remains, i.e. the update has to be done by a function module called from PAI of own infotype, and from a function module you can't trigger the T588Z-functionality.
The update of it0003 from own it9300 is only an example, have general requirements that:
- from own infotype PAI a function module shall be called
- from the function module update of other infotypes
shall take place (modify as well as insert and delete)
- if more infotypes shall be updated from source infotype,
rollback shall take place if ex. update of last target
infotype fails (all to be updated or none!).
Regards Søren

LaunchDaemon canceling restart + other issues

I have an app I want to always run so I created a LaunchDaemon to keep it going:
<plist version="1.0">
<dict>
<key>Label</key>
<string>com.sns.sentinel.air</string>
<key>KeepAlive</key>
<true/>
<key>ProgramArguments</key>
<array>
<string>sh</string>
<string>/Applications/oc4j/restartSentinel.sh</string>
</array>
<key>RunAtLoad</key>
<true/>
</dict>
</plist>
And restartSentinel.sh is very simple:
echo Process Sentinel.app is being restarted...
open -W /Applications/oc4j/j2ee/home/applications/Sentinel/Sentinel.app;
That's an adobe AIR application which does not launch a window but does show up in the dock. I tried to avoid that by setting it's Info.plist file with LSBackgroundOnly = true and LSUIElement = false but that didn't seem to work.
I also have another app running with almost the same format in its plist file only it calls a script which launches a jar file (which is an instance of an oc4j java server).
Everything seems to be fine but the AIR app seems to terminate on a reboot. The jar file runs fine, however. So I have another daemon which loads the AIR app a few minutes after a reboot and then the daemon runs fine. So that's the first problem.
Also, I have to access this machine via screen sharing. When I log in, the AIR app gets shut down and and then restarted by launchd. And that's the other issue. Even worse however is when another user logs in with screen sharing. The Sentinel.app daemon gets shut down and does not restart at all until I log in again.
The final issue occurs when you try to end your screen sharing session (via log out or restarting the machine). Launchd seems to cancel the restart/logout. Usually the message says that it's the java jar process that is cancelling logout. This one is the most severe of all the problems.
So how can I get launchd to let people use screen sharing without killing the app and how can I get it to stop canceling logot/restart?

It is possible that there is a problem with the file(s) that store the extensions registry.
Delete the files extensions.* (e.g. extensions.sqlite, extensions.ini, extensions.cache) and compatibility.ini in the Firefox profile folder to reset the extensions registry.
*https://support.mozilla.org/kb/Profiles
New files will be created when required.
See "Corrupt extension files":
*http://kb.mozillazine.org/Unable_to_install_themes_or_extensions
*https://support.mozilla.org/kb/Unable+to+install+add-ons
If you see disabled, not compatible, extensions in "Tools > Add-ons > Extensions" then click the Tools button at the left side of the Search Bar (or click the "Find Updates" button in older Firefox versions) to check if there is a compatibility update available.
If this hasn't helped then also try to delete the addons.sqlite file.
You can use this button to go to the Firefox profile folder:
*Help > Troubleshooting Information > Profile Directory: Show Folder

Muse update installation issues

I have a monthly subscription to Muse and everytime I try to install the latest updates Ihave issues. When I try to install directly from MUSE it tells me to check my network connection - which is always fine. I have tried pausing my virus protection etc. I then try to get help from customer support and the fxes do not appear to work etiher. I haveuninstalled and reinstalled etc with no luck -any suggestions

Try disabling any firewall or antivirus application and re-try updating, also try a different network connection. If that doesn't help, please uninstall and use the following direct download links to install Muse fresh.
Mac - http://www.adobe.com/go/muse_latest_win
Win - http://www.adobe.com/go/muse_latest_mac
Thanks,
Vinayak

Printing in OsX 10.6.x and other issues

I just updated from a trusty G5 running OSX 10.4.11 to a 2010 Intel iMac running OSX 10.6.8 and can't for the life of me get my Epson 3800 and 595 printers to work. I've downloaded new drivers and also resorted to a clean install but no luck. The other issue is that when I run permission repairs in Disk Utility I get extensive repairs only to have the same thing happen again the next time I run the utility. Suggestions please!

Thanks for the permissions info. It' a bit disconcerting that in Snow Leopard the Disk Utility just seems to continue repairing things that were supposedly fixed the last time I ran it. In Tiger a second go with Disk Utility would usually come up clean.
Still having printing problems. Software update supposedly installed new drivers but neither the Epson 595 or 3800 will print. The error message in the driver window is:
Error:/System/Library/Printers/Libraries/PrintJobMgr/Contents/MacOS/PrintJobMana ger failed
Not sure, but it sounds like something in the OS dropped the ball.
Any input appreciated.

Microsoft Office 2008 issues. Help. Excel not opening and other issues!

I converted to Lion on day one. I was able to use Microsoft Office 2008 without problem for days, then, just today, every time I go to open an excel file it opens, closes, then gives me the option of sending error reports to Microsoft. Word opens fine. The program is totally up to date (just did the 12.3 update). I repaired disk permissions, restarted the computer twice. Still, the same things happen. Here is the message I get for the Microsoft Excell Error Report:
Error Signature:
Exception: EXC_BAD_ACCESS
Date/Time: 2011-07-25 00:43:45 +0000
Application Name: Microsoft Excel
Application Bundle ID: com.microsoft.Excel
Application Signature: XCEL
Application Version: 12.3.0.110427
Crashed Module Name: unknown
Crashed Module Version: unknown
Crashed Module Offset: unknown
Blame Module Name: unknown
Blame Module Version: unknown
Blame Module Offset: unknown
Application LCID: 1033
Extra app info: Reg=en Loc=0x0409
Crashed thread: 0
OTHER ISSUES
The other thing that happens is that whether on Word or Excel when I click on a file to open it, it keeps trying to open all the recent files from that program intead of *just the ONE* that I want it to open. I also notice on Safari that when I reopen the program it opens ALL the websites I recently visited even though I don't have that checked as a preference... What gives??????????
Any suggestions. I am freakingout here, really need to get into these documents.

Hi there.
This sound awfull like an issue with the resume function in OSX Lion.
This can be adjusted in system settings under general.
See:
http://osxdaily.com/2011/07/18/disable-mac-os-x-lion-resume-window-restore/
Hope this solves your problems.

Power Mac G4 (sawtooth) AGP - Firmware and other issues

Hello,
So I was given an older Power Mac G4 AGP which I've been using while my Power Book G4 gets a logic board replacement but I've been having some issues with the AGP unit. How do you check to see what version of the firmware you have? I read a firmware update but it requires OS 9 to launch and I don't know if I need this or not. The other issue has been when I tried to run Firefox after successfully installing it. Firefox doesn't launch, it just opens and then closes. When I use Safari, the browser will work for about a few minutes but then it will freeze and I need to force quit it. I am running 10.4.11 and I was thinking of installing 10.5.6 but I'm not sure if this is possible with the Sawtooth. Do I need to upgrade the processor? Any advice or help is appreciated.

Hi, veesh678 -
Early models of the G4 (AGP) models came with OS 8.6; later models came with an installer for a model-specific version of OS 9.0.4. The latter disk will have a blue-gray label, be named "Power Mac G4" with a subtitle "Software Install", and has a part number of 691-2657-A (the part number will be in fine print on the right-hand side of the label).
Non-current firmware will not preclude the machine from booting to that CD; a retail OS 9.0.4 Install CD (white label, gold 9, no model named) probably will not work, although a retail OS 9.1 or 9.2.1 Install CD should work fine.
The current firmware version for the G4 (AGP) model is v. 4.2.8, which can be downloaded from this article -
Article #120068 - G4 Firmware Update 4.2.8
Note that to install that version the machine must be booted to OS 9.1 or OS 9.2.x from its hard drive, and the firmware update must be run from the same hard drive.
Before installing firmware update v. 4.2.8, download and run DIMM First Aid (it's a free download) to verify the compliance of the RAM in the machine.

Update & Other Issues

Similar Messages

Maybe you are looking for