Update --PSE 11 - MacOX 10.7.5  -MORE-Printer and Profiles Not Working Correctly for first print

Adobe seem to have implemented the CS5 print screen format.
PSE11 
1.  page setup the entire OSX print screen comes up where you then set all your settings including paper type, paper size and all other things including paper format, colorsync or epson etc.     you then save it       and finally go to print.    completely different.
2.  options  select profile
3. print
it also seems everytime you go to print the actual paper size is not remembered you must go in select page set up again   do nothing then go out and it adjusst itself again.  Yes, my osx preference file is set recognize this printer as my primary printer.
More as the story unfolds.    I have yet to hear if anyone have this problem.
cheers elo

  It does seem like strange behavior but thanks for sharing the work around.

Similar Messages

  • PSE 11 - MacOX 10.7.5  -MORE-Printer and Profiles Not Working Correctly for first print

    As suggested by adobe support contacted Epson.   What I expected no help.  Since it works ok with PSE10, PSE 9, CS5 it could not be their problem. 
    However PSE 11 have changed something in the sequence of events.
    I then downloaded a trial version of Lightroom 4.   no problem everything works.
    I have been offered a refund for PSE11.     That is not encourageing.  Does that mean wait for PSE12?????
    I developed a bypass - every time I start up PSE11  I just print a dummy image thumb nail size.   then go on to regular printing and all works.
    original discussion
    Macosx 10.7.5
    When I start up PSE11  and go to print I set up the paper size then select a Printer Profile.  When print the image it is a mess and seem to be black and white it is as if I printed on the wrong side of the paper.
    I then go and try to print it again.   Now it all works as it should beutiful colours and spot on.  all other print following this works.
    Then I shut down PSE11.   Start it up again.  Guess what  first print is a mess again.   all others after are fine.
    I uninstalled PSE11, deleted prefs.  and reinstalled PSE11.    Same thing..   first print a mess all others ok.
    the issue can be replicated consistantly......
    no problems with PSE10 or PSE9
    any suggestions?????
    cheers elo

      It does seem like strange behavior but thanks for sharing the work around.

  • PSE 11 - MacOX 10.7.5  -MORE-Printer and Profiles Not Working Correctly

    Changed Profiles after printing many prints..     this time the first print was dark/black muddy as on my previous discussion...  follow up prints fine....
    see early discussion about 12 hours ago

    I will suggest you to re verify that the Profile of your image and Profile of printer are same.
    PSE11 prints an image in two different scenario:-
    1. When Color Handling is governed by Photoshop Elements  and  2. When Color handling is governed by Printer
    I will explain you these two scenario in detail.
    1. Open your image in PSE11.
    2. Go to Image > Mode and note down the image mode.
    3. Now launch Print dialog.
    4. Click "More Options" button present on Print dialog.
    5. Now select Color Management tab.\
    6. Here you can find Image Space , this should be same as you noted down in 2nd step.
    7. From here you can control Color Handling options.
        a) From "Color Handling" drop down you can select either "Printer Manages Color" or "Photoshop Elements Manages Color".
        b) If you select Printer Manages color then you can see the profile of your printer in Printer Profile, that you cannot change.
        c) But if you will select "Photoshop Elements Manages Color" then you can change the Printer Profile.
       Now in both cases, for best result, make sure that that Image Space and Printer Profile is same.
       Also if you are using Photoshop Elements Manages Color then please turn off the Color Management of printer from your Printer Preferences option.
    If your Printer Profile is known to you then you can also change the Image mode from Image > Mode menu.
    For best result of printing it is necessary that both Image and Printer profile are same.
    Hope it will help you in your problem.
    Cheers !!!

  • PSE 11 - MacOX 10.7.5  Printing Wide Format Printer and Profiles Not Working Correctly

    Macosx 10.7.5
    When I start up PSE11  and go to print I set up the paper size then select a Printer Profile.  When print the image it is a mess and seem to be black and white it is as if I printed on the wrong side of the paper.
    I then go and try to print it again.   Now it all works as it should beutiful colours and spot on.  all other print following this works.
    Then I shut down PSE11.   Start it up again.  Guess what  first print is a mess again.   all others after are fine.
    I uninstalled PSE11, deleted prefs.  and reinstalled PSE11.    Same thing..   first print a mess all others ok.
    the issue can be replicated consistantly......
    no problems with PSE10 or PSE9
    any suggestions?????
    cheers elo

    Thank You for your suggestions.
    I have been printing using PSE for over  14 years going back before the term PSE came up.  I have done this professionally using profiles from others and those I generate myself..
    All the things you  mentioned have been done.
    The main  point missing in your suggestions is   It is only the first print every time I open up PSE11 that does not work...
    at completion of print I immediately go back to the file command and say print and then bypass all settings and print again.   this time and every other print aafter are perfect...      I did not change one single setting...
    I know about printer and adobe settings etc.     but thanks for going through the list it was a good reminder of how to remember everything sometimes we rush and forget something...
    Finally    It works PSE6, PSE9, PSE10, CS5, Lightroom 4.   I think I have the settings right......
    Any suggestions for how to get PSE11 to force the settings for the first print would be appreciated..
    Only thing I have not done is upgrade to the latest version of the epson driver.  Released less than a month ago to provide support for mountain lion.(iam only on lion)  Maybe just maybe???   you never know.   Will try this when I finish by next batch of prints.
    I will back up as I do weekly...    Still have the old driver from way back in release 10.5.8   will try to fire up to 10.5.8 and see what happens....
    cheers elo
    Message was edited by: Elo Laugesen

  • Hp Printer 4500 networked not working correctly after 7 to 8.1 migration

    After swiiching over to a new hp computer running 8.1 from old hp runing 7.  The hp envy 4500 network printer fails when doing multiple pages.  It prints about 1 ot 2 pages then dies on a partial page.  Have installed and reinstaled envy software on pc and first from disk hten hp website.   any ideas

    You did load the full featured software and drivers for 8.1 right????

  • Print does not work correctly for this web page

    When I print this, part of the bottom of the text is dropped (2-3 paragraphs). If I set it to landscape mode, even more of it is dropped.

    Just adding an image of a PDF I created using landscape mode.

  • The APP STORE app on the iPhone 4S not working correctly for UPDATES now.

    It used to be, when I had APPS that needed to be updated, I would see a badge on the APP STORE icon with the number of apps that needed to be updated. Then I could tap on the icon for the APP STORE, and I would see the UPDATE button showing the badge as well. I would also see the actual apps needing updating on screen.
    NOW, even though there are APPS that need updating, there is NO badge on the APP STORE icon, there is NO BADGE on the UPDATE button, and no apps will appear on screen. If I tap the UPDATE button, after a few seconds, the apps WILL appear on screen, the badge WILL appear on the UPDATE button, and, if I go to the home screen, the APP STORE icon has the badge with the number.
    It is as if the apps that need updating do not automatically go to the APP STORE app anymore until I summon them by pressing the update button. This happened ever since I did an iPhone update from backup a few days ago.

    try hard resetting the device, holding the power button and the home button at the same time, and reset all settings (wont delete anything) settings>general>reset>reset all settings

  • Sluggish at initial opening and loading websites, google maps print and images not working right, problems are not present in Chrome and Safari

    Firefox is very slow opening. Web pages load slowly. When I go to images in a Google search, the pictures take a long time to load, and when I click on an image, then the back arrow, the loading time for the previous page is very slow. When I print a Google map, it is small, rather than full-page. In Google Chrome or Safari, the same actions product immediate results. I cannot get Google desktop to work.

    This sounds like a network problem, since it goes away when you connect through a different network. You'll need to talk to your university's IT department about this.

  • I want the feeder on top to pick up the paper and does not work. Brand new printer.

    I have a new printer HP Office Pro 8610 and the paper on tope does not feed. It did for one or two times and stopped.  I did not buy a warranty. I expected the printer to work. Please help. 

    The document here may help resolve issues with the ADF not feeding properly on your Officejet Pro 8620.  
    If the above does not resolve the issue - what country are you in?  There is generally a one year warranty included for HP printers. You can check with HP's warranty tool here.  In the US or Canada you could call HP at 1-800-HPINVENt, elsewhere see the contact information here.
    Bob Headrick,  HP Expert
    I am not an employee of HP, I am a volunteer posting here on my own time.
    If your problem is solved please click the "Accept as Solution" button ------------V
    If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

  • Email counter and connection not working correctly after updates

    How do I fix the email counter on my dock bar it shows that I have 214 unread and they have all been read?
    Also, my email is constantly asking me to enter my password to establish connection this is after I have been working in email and sending and receiving emails fine.  Does anyone have a fix for this?

    I did find the problem with the counter.  It had to do with my Gmail account not my other email account.  I still haven't found the answer to the question of my connections to my email accounts are dropping and need me to enter my password though.  I have made sure that the passwords is correct that is entered.

  • Print queue does not work

    Since the update I did from Tiger to Leopard the Print Queue does not work. When I print a document the printer starts to jump up and down on the Dock for more than 5 minutes. Printing finishes and the icon of the printer is still "dancing" on the Dock. If I try to open Print Queue the window does not open immediately but after a long time and I can't see the printing documents that are waiting in the queue. As a result I can't stop or pause or delete a printing document. The same thing happens if I try to open Print Queue from the Print & Fax Preferences' window. The window opens after a long delay and nothing can't be controlled from this window. I forgot to say that the printer icon remains on the Dock and Force Quit is the only option I have when trying to quit it.
    I have tried Permissions Repair. Nothing happened. I installed the latest driver. The problem is still there. Only after Reseting Printing System the problem is fixed but until the first reboot. If I restart the computer then the problem appears again and the only thing I can do is to Reset again the Printing System. So, if I want to control the printing procedure, I have to Reset Printing System after every restart!!! Any help???
    P.S. I have a Canon iP4500 but I don't think that the printer is the problem because with Tiger I had never face this problem and I have also printed with this printer from a MacBook running Leopard with no problems.

    1) I tried Print Therapy and after I had repaired Permissions the problem was solved (some permission problems were found) until the next restart.
    2) Then I tried to stop and start again the cupsd process and again the problem was solved until the next restart of the computer.
    3) Then I replaced the cupsd.conf file with a new one but the app asked to restart the computer and after this the problem was back.
    4) Print Therapy does not find any problems neither in the properties of the root user nor in the current user or any other group.
    5) Also the verification of the temporary files find no problems.
    In conclusion I think that the problem lies in the cupsd process because when stopped and restarted (we can forget that by Repairing Permissions actually we restart cupsd) I have no problem until the next restart of the computer.

  • HT1338 After updating my mac to the new operating system I have had several problems.  Now my printer program is not working.

    After updating my mac to the new operating system I have had several problems.  Now my printer program is not working.
    Do you have any suggestions?

    Start by telling us what printer you hope to use.
    Look at the printer manufacturers site to see if they have a 10.9 print driver.
    Assuming you have tried to delete & re-add the printer it's possible that the model is no longer supported.
    You can also try the printing system reset…(I think 10.9 is the same as the Lion instructions).
    http://support.apple.com/kb/HT1341
    If the model is supported you should be able to add it & the driver will be downloaded.

  • Print Spooler does not work after Win 8.1 install

    I upgraded several computers to Win 8.1.  Most are operating normally and do not have this problem.  This is relevant to show that it is not a printer hardware or compatibility problem.  On one computer, the print function is not working. 
    I've tried reinstalling printers, getting new drivers, etc.  It comes down to this.  An active (connected) printer is selected and print test page is selected.  The dialog box says that the print queue is full.  I went to the queue subdirectory
    and deleted all files, no change to the results.  The Print spooler is active in task manager.  Stopping and restarting the print spooler makes no difference.  Any ideas?

    I had similar problems with HP Printers on the LAN (after upgrade from Windows 8 tot 8.1 
    32bit)
    HP Laserjet 4000  Laserjet 4050 and Laserjet 4250 - all with Network interface.
    Erratic behaviour: inserting blank pages, no duplex printing, programs stalling when printing etc…
    Printers and network are fully functional and work perfectly with W7 and XP. Not with Windows 8.1.
    Strange thing: Epson Aculaser and Ricoh Aficio 3224  worked fine but those were installed after the Windows update.
    So definitely something with the Microsoft drivers for the HP Laserjet printers.
    After a few installs and uninstalls of the HP printer drivers the problems stayed.
    Then I removed all HP related driver files (C:\\Windows\\system32\\spool\\PRINTERS")
    and all references in the Register because the standard uninstall of the drivers did not remove all files.
    -> First uninstall ALL  HP printers (laserjet, deskjet, officejet etc ..)
    -> Then look in
    [HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Print\Monitors]
    [HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Print\Environments\Windows NT x86\Drivers]
    [HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Print\Environments\Windows NT x86\Print Processors]
    [HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Print\Printers]
    Make a backup of the registry keys and then remove all files starting with hp….
    Remove the print processors starting with hp 
    (i.e. hpzpplhn.exe)
    Then restart your system.
    Reinstall the printers, they should be OK now.
    If you still have duplex printing problems : replace the hpzpplhm print processor with the winprint processor. (may give other limitations, google for more info).
    In my case this solved the erratic printing problems.

  • AcroPDF ActiveX print functions are not working with Adobe Reader 9.2 / Actobat Reader 9.3

    AcroPDF ActiveX print functions are not working with Reader 9.2/9.3. Tried ActiveX print functions like printPages(), printAll(), printWithDialog(), none of them is working. Tried on platforms: XP 32 bit and Win7 32 bit. These print functions all work fine with Adobe Reader 9.1.0. or 8.2.0 or 8.1.0 on XP 32 bit or Win7 32 bit.
    The way I have my setup: I have created a C/C++ project with AcroPDF MFC ActiveX classes. I have created an AcroPDF object in there, and then calling it's LoadFile() function passing a pdf file in the parameter. Then calling the printPages() or printAll() function. With Adobe Reader 9.1.0. or 8.2.0 or 8.1.0, printing is starting through the default printer without any problem. As soon as I update the reader version to 9.2 or more, the same code stops working.
    Is anybody noticing any similar issue? Any info on this will be highly appreciated. Thank you!

    Unfortunately printWithDialog() is also not working. Actually none of the print functions like Print(), printWithDialog(), printPages(), printPagesFit(), printAll(), printAllFit() are working. All of them works fine though with older reader.
    BTW, what security related changes are there for printPages() and printAll()? Can you please elaborate on that? Is there any workaround?

  • Windows Server 2008R2 running Remote Desktop Services reports printer process does not exist when installing PDF printer

     Windows Server 2008R2 running Remote Desktop Services reports printer process does not exist when installing PDF printer, And when Installing network printers from the domain controller it reports it cannot connect to printer.  I can ping all
    network devices. I can connect to the internet.
    On boot I get a netlogon 5719 error followed by service control manager errors 7023,7001 and a group policy error 1129.
    Clients can connect to the remote application and RDP operates to connect to the server internally and externally.
    The domain controller is another server 2008r2 box. I have scoured the internet but have not found any solutions that work yet.

    Hi,
    After referring to your post, it can be identified that the issue which you are facing is mostly due to some network issue in your environment. Please recheck your network connection issue between computer and domain controller. 
    Can you able to ping with IP address and also with fully qualified name of a domain controller in the users' and computers' domain. If it fails states that name resolution issue with computer and domain controller. Are you using MS DHCP Relay agent then there’s
    available Hotfix for the particular Event ID. Please go through this KB 2459530 to fix the error event ID.
    As per the net logon error 5719 which you are facing states that the client component of Netlogon was unable to locate a DC for the domain it was trying to perform an operation against. Below is one of the reason. If this is being logged on a DC and the event
    refers to the DC's own domain, something might be preventing the client component of Netlogon from starting a network session (to itself or to another DC in the domain). The following event 7001 & 7023 states start & stop operation service. Please
    go through beneath article for more details.
    1.  Event ID 5719 is logged when you start a computer
    2.  Netlogon 5719 and the Disappearing Domain [Controller]
    3.  Event ID 1129 — Microsoft-Windows-GroupPolicy
    Hope it helps!
    Regards.

Maybe you are looking for