PSE 11 - MacOX 10.7.5 -MORE-Printer and Profiles Not Working Correctly for first print

As suggested by adobe support contacted Epson.   What I expected no help. Since it works ok with PSE10, PSE 9, CS5 it could not be their problem.
However PSE 11 have changed something in the sequence of events.
I then downloaded a trial version of Lightroom 4.   no problem everything works.
I have been offered a refund for PSE11.     That is not encourageing. Does that mean wait for PSE12?????
I developed a bypass - every time I start up PSE11 I just print a dummy image thumb nail size.   then go on to regular printing and all works.
original discussion
Macosx 10.7.5
When I start up PSE11 and go to print I set up the paper size then select a Printer Profile. When print the image it is a mess and seem to be black and white it is as if I printed on the wrong side of the paper.
I then go and try to print it again.   Now it all works as it should beutiful colours and spot on. all other print following this works.
Then I shut down PSE11.   Start it up again. Guess what first print is a mess again.   all others after are fine.
I uninstalled PSE11, deleted prefs. and reinstalled PSE11.    Same thing..   first print a mess all others ok.
the issue can be replicated consistantly......
no problems with PSE10 or PSE9
any suggestions?????
cheers elo

It does seem like strange behavior but thanks for sharing the work around.

Similar Messages

Update --PSE 11 - MacOX 10.7.5 -MORE-Printer and Profiles Not Working Correctly for first print

Adobe seem to have implemented the CS5 print screen format.
PSE11
1. page setup the entire OSX print screen comes up where you then set all your settings including paper type, paper size and all other things including paper format, colorsync or epson etc.     you then save it       and finally go to print.    completely different.
2. options select profile
3. print
it also seems everytime you go to print the actual paper size is not remembered you must go in select page set up again   do nothing then go out and it adjusst itself again. Yes, my osx preference file is set recognize this printer as my primary printer.
More as the story unfolds.    I have yet to hear if anyone have this problem.
cheers elo

It does seem like strange behavior but thanks for sharing the work around.

PSE 11 - MacOX 10.7.5 -MORE-Printer and Profiles Not Working Correctly

Changed Profiles after printing many prints..     this time the first print was dark/black muddy as on my previous discussion... follow up prints fine....
see early discussion about 12 hours ago

I will suggest you to re verify that the Profile of your image and Profile of printer are same.
PSE11 prints an image in two different scenario:-
1. When Color Handling is governed by Photoshop Elements and 2. When Color handling is governed by Printer
I will explain you these two scenario in detail.
1. Open your image in PSE11.
2. Go to Image > Mode and note down the image mode.
3. Now launch Print dialog.
4. Click "More Options" button present on Print dialog.
5. Now select Color Management tab.\
6. Here you can find Image Space , this should be same as you noted down in 2nd step.
7. From here you can control Color Handling options.
    a) From "Color Handling" drop down you can select either "Printer Manages Color" or "Photoshop Elements Manages Color".
    b) If you select Printer Manages color then you can see the profile of your printer in Printer Profile, that you cannot change.
    c) But if you will select "Photoshop Elements Manages Color" then you can change the Printer Profile.
   Now in both cases, for best result, make sure that that Image Space and Printer Profile is same.
   Also if you are using Photoshop Elements Manages Color then please turn off the Color Management of printer from your Printer Preferences option.
If your Printer Profile is known to you then you can also change the Image mode from Image > Mode menu.
For best result of printing it is necessary that both Image and Printer profile are same.
Hope it will help you in your problem.
Cheers !!!

PSE 11 - MacOX 10.7.5 Printing Wide Format Printer and Profiles Not Working Correctly

Macosx 10.7.5
When I start up PSE11 and go to print I set up the paper size then select a Printer Profile. When print the image it is a mess and seem to be black and white it is as if I printed on the wrong side of the paper.
I then go and try to print it again.   Now it all works as it should beutiful colours and spot on. all other print following this works.
Then I shut down PSE11.   Start it up again. Guess what first print is a mess again.   all others after are fine.
I uninstalled PSE11, deleted prefs. and reinstalled PSE11.    Same thing..   first print a mess all others ok.
the issue can be replicated consistantly......
no problems with PSE10 or PSE9
any suggestions?????
cheers elo

Thank You for your suggestions.
I have been printing using PSE for over 14 years going back before the term PSE came up. I have done this professionally using profiles from others and those I generate myself..
All the things you mentioned have been done.
The main point missing in your suggestions is   It is only the first print every time I open up PSE11 that does not work...
at completion of print I immediately go back to the file command and say print and then bypass all settings and print again.   this time and every other print aafter are perfect...      I did not change one single setting...
I know about printer and adobe settings etc.     but thanks for going through the list it was a good reminder of how to remember everything sometimes we rush and forget something...
Finally    It works PSE6, PSE9, PSE10, CS5, Lightroom 4.   I think I have the settings right......
Any suggestions for how to get PSE11 to force the settings for the first print would be appreciated..
Only thing I have not done is upgrade to the latest version of the epson driver. Released less than a month ago to provide support for mountain lion.(iam only on lion) Maybe just maybe???   you never know.   Will try this when I finish by next batch of prints.
I will back up as I do weekly...    Still have the old driver from way back in release 10.5.8   will try to fire up to 10.5.8 and see what happens....
cheers elo
Message was edited by: Elo Laugesen

HFR Range from and to - Not working correctly for hierarchies?

Hi All,
Can anyone help me with my below issue relating to ranges in Oracle’s Hyperion Financial Reporting Studio tool.
The issue I’m experiencing is that when I create a report and use the ‘Add Relationship’ -> ‘Range’ option for my month dimension, the correct months are returned as long as the start month and end month are not the same.
In our setup we have 2 month hierarchies, one for the fiscal year (July to June) and another for the calendar year (January to December). The problem that I’m noticing in the report, is that when I enter a range from July to July, that instead of returning July, it returns July, August, September, October, November, December, January, February, March, April, May, June, July. My though it that it is looping through both the fiscal and the calendar hierarchies to return the range, instead of only the fiscal hierarchy. Both these hierarchies have the same members, however ordered differently.
Does anyone know of a way to resolve this within HFR?
I noticed that when creating the range, there is an option to ‘select a hierarchy’. At the moment there is only 1 choice ‘ Period’, however I’m curious if I could create and link a hierarchy to the fiscal hierarchy, that this might resolve the problem?
Any ideas?
Thanks,
Lance

Hi Lance,
IIRC Range uses the first (main) hierarchy - so you'll need to move the Fiscal year one to be first in the outline.
Cheers, Iain

I have an iPhone 4 on contract and its not working correctly , what should I do ?

I have an iPhone 4 on contract , I only have this 5 and a half months and the iPhone is not working correctly and i do not have insurance .. What should I do ??

It sounds like you did not purchase it at the Apple store? That doesn't matter - you can still take it to Apple to troubleshoot it.
You can also try to troubleshoot it with the help of the folks here - if you want to do that, let me know and I'll ask that your post be moved to the iPhone forum where you're more likely to get knowledgeable answers, ok.

T42p vista fn + f3 and fn + f4 functions (turn off screen and sleep) not working correctly

Hi -- I recently installed windows vista on my T42p. It works fine except that the fn+f3 and fn+f4 functions do not work as expected. Before installing the hotkeys driver, the fn+f4 function worked correctly while f3 did not (going to sleep worked, turning the monitor off did not). I then installed the recommended hotkeys driver. Now fn+f4 makes the monitor turn off while f3 does nothing ... fn+f4 is supposed to put the laptop to sleep. On top of this, if i select "sleep" from the start menu, the computer turns the monitor off instead of going to sleep.
Presumably, the sleep button could still be telling the computer to go to sleep, but the actual operation of going to sleep is now broken? Just a guess. Anyways -- anyone know how to resolve this so that fn+f3 turns my monitor off and fn+f4 puts my computer to sleep?

I've too this problem, but more, my sound mute wasn't worked (for deblock, but it can block it few second before...) 5 days in 5-6 instalation of three version of winxp: winxp ru x64 sp2, winxp es/ru sp3 x32.
eventually I've found and ran "TPOSDSVC.exe" in instalation directory and it give an opportunity deblocking the sound volume!!!!!!!!!!!! and I don't need more functions
volume levels and brightness adjustment worked well without OSD (before I ran TPOSDSVC.exe) and with OSD.
and now I don't know worked this bustered sound driver in winxp x64.
ThinkPad T61 7664

HT203175 drag and drop not working desperate for help

Can you possibly help me with my drag and drop?
All of a sudden itunes won't let me drag purchased tracks or tracks from library on to my ipod. I have read you need to make sure you have checked manually manage music and videos and I have done that. It worked one minute and now has stopped. I don't understand why drag and drop has just been fine then suddenly stopped working.
Thanks.

Oh right... All my devices are on the SAN and have been set as edit-in-place. The files in question were copied from the regular media watch folder to the media device. So basically just one folder on the SAN to another.
It has to be more than just the watcher, because two of the files in question were added by a subscription response that has worked fine for me before.
Thanks,
Mario

Hp Printer 4500 networked not working correctly after 7 to 8.1 migration

After swiiching over to a new hp computer running 8.1 from old hp runing 7. The hp envy 4500 network printer fails when doing multiple pages. It prints about 1 ot 2 pages then dies on a partial page. Have installed and reinstaled envy software on pc and first from disk hten hp website. any ideas

You did load the full featured software and drivers for 8.1 right????

Keyboard and mouse not working correctly after installing Windows 8.1

I was forced to upgrade my computer to Windows 8.1. My keyboard worked fine until the sytem did a reboot. Numbers on keypad stopped typing and letters were being capitalized when the caps lock was off and the numbers across the top will only type the symbol above the numbers.
I looked up this problem and it seems I need to enter UEFI settings and disable Intel XHCI mode. When I get into the UEFI settings I cannot make any selection from the startup menu. Both my keyboard and mouse stop working.
Any suggestions?
This question was solved.
View Solution.

Thank you for posting a response. Fortunately, I didn't have to try your solution because the computer resolved itself.

RAM previewing and rendering not working correctly

Hi,
Today I was just about finished editing a video on CS6 and then when I'm about to add the last effect and render it it stuffs up on me:(. What happens is that while RAM previewing at some point during the loading of the preview it will stop loading, It will then proceed to play the ram preview on loop and when I press a button to stop it a small box pops up in the centre of my screen and the ram preview bar to show what has loaded (the one which shows green for parts that are loaded and blue for cached) turns black and sometimes other parts of after effects turn black. This has happened before and I fixed it by uninstalling and reinstalling After Effects about 6 times. I would do that this time though I would like to know the cause of it and any possible fixes as it is quite irritating. Another thing that may be happening is the RAM usage is slowly filling as I render. This has happened before on my laptop and I did not manage to fix it though it was not related to the first issue that time. The last time when it happened on my laptop the RAM usage eventually filled up to 100% and it would no longer render. I am not sure if it is happening this time as it is still currently rendering though I will update the thread if it does. Finally my render is going very slowly, I am not sure if this issue is realted to any of the above or if it is just the effects I am using though. My memory and multiprocessing settings are using 6 cores of 7 with 2 GB of ram allocated to each with multiprocessing on. My ram allocated for other programs is 6GB. To fix these Issues so far I have tried clearing the cache, purging the memory and image cache, restarting my computer and reinstalling after effects. My specs are:
i7 4770k non overclocked
GTX 780
G.Skill Ripjaws Z 2133mhz 32GB
Samsung 840 pro
Seagate Barracuda
MSI Z87-G45
H100i cooler
Any reply is appreciated
Thanks in advance
Sam

How much experience do you have with AE? Ram preview can be lengthened by adjusting the resolution of the composition window, different parts of the project can be previewed using the work area, and preview length and render time are both a function of composition frame size. Complex, memory intensive effects like particle systems will reduce the render time and the length of a ram preview. Without knowing the details of your composition it's hard to say if you are running into a bug, running out of resources, or experiencing normal behavior.

Clientless VPN and Java not working correctly

In a recent discovery we found that the newest version of java will not work with our Cisco SSLVPN setup
We are using an ASA5510 with 8.0.4 IOS version and 6.1.3 ADSM version and most users use an mstsc.exe smart tunnel to rdp into our terminal server farm.
Our laptops are being imaged with Java 6 update 3 (this works fine) then upgraded to Java 6 update 11, after which the smart tunnel appears to launch but a connection cannot be established. Reinstalling the older version of Java resolves the problem.
I was wondering if anyone else has encountered a similar problem and found a workaround. Currently, company equipment is not being upgraded to the latest version of Java but personal equipment is a different story.

To get the old downloader back follow the directions below.
# In the [[Location bar autocomplete|Location bar]], type '''about:config''' and press '''Enter'''. The about:config "''This might void your warranty!''" warning page may appear.
# Click '''I'll be careful, I promise!''', to continue to the about:config page.
# Filter '''browser.download.useToolkitIT'''.
# Double click and '''make sure it says true.'''
# You now have the classic downloader back! Yay!
Any issues or confused?
* http://kb.mozillazine.org/About:config

Time change for daylight savings and Alarms not working correctly

we have 3 iPhones in our house. 2 were set to auto time change for daylight saving and one wasn't. 1 did the auto time change with out an issue and all alarms worked ok. The other 2 have had issues with not been able to set the alarms ie set alarm for 0630 and it goes off at 0530 even though the time is set correctly. The 1 that was set to autotime worked fine until I switch auto time off, now the alarms on this one wont work either. well they work but just at the wrong time. The 3rd phone will allow alarms to be set, but the alarm will go off an hour earlier and this phone will not allow the alarm to be set for 0630 at all.
Has anyone had this issue and resolved it. It makes getting up for shift work a right pain..

Read here:
http://www.appleinsider.com/articles/10/10/11/applesays_ios_software_update_to_fix_pesky_alarm_clockbug.html

Sluggish at initial opening and loading websites, google maps print and images not working right, problems are not present in Chrome and Safari

Firefox is very slow opening. Web pages load slowly. When I go to images in a Google search, the pictures take a long time to load, and when I click on an image, then the back arrow, the loading time for the previous page is very slow. When I print a Google map, it is small, rather than full-page. In Google Chrome or Safari, the same actions product immediate results. I cannot get Google desktop to work.

This sounds like a network problem, since it goes away when you connect through a different network. You'll need to talk to your university's IT department about this.

I want the feeder on top to pick up the paper and does not work. Brand new printer.

I have a new printer HP Office Pro 8610 and the paper on tope does not feed. It did for one or two times and stopped. I did not buy a warranty. I expected the printer to work. Please help.

The document here may help resolve issues with the ADF not feeding properly on your Officejet Pro 8620.
If the above does not resolve the issue - what country are you in? There is generally a one year warranty included for HP printers. You can check with HP's warranty tool here. In the US or Canada you could call HP at 1-800-HPINVENt, elsewhere see the contact information here.
Bob Headrick, HP Expert
I am not an employee of HP, I am a volunteer posting here on my own time.
If your problem is solved please click the "Accept as Solution" button ------------V
If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

PSE 11 - MacOX 10.7.5 -MORE-Printer and Profiles Not Working Correctly for first print

Similar Messages

Maybe you are looking for