Update rules deactivated only has to open the system..

Hello Experts,
-- ODS and update rules are already in Production.
-- I have made changes to the ODS by adding new Infobjects.
-- activated the update rules.
-- When the ODS and update rules are transported. Update rules get deactivated
-- And a message 'Data target changed, suggestion for the update rules generated'
Detailed message:
Data target was changed. Suggestion for update rules generated
Message no. RSAU287
CAUSE&
The data target has been changed (for example, InfoObjects have been added or deleted).
System response
The update rules have been set to inactive.
Procedure
Check the proposal for the update rules: Newly added key figures or characteristics are updated directly using the source-InfoObject from the InfoSource if the InfoSource contains these InfoObjects. Otherwise, the calculation type is set to 'Routine'. Newly added key figures, data fields, or attributes are set to 'No Update'.
The rules for key figures and for characteristics must be checked and adjusted appropriately.
Detailed message end.........
-- Do not get activated by retransporting. or doing a fresh request of the update rules.
-- Currently the only I can see by opening the system and activating them. Wondering if we have any other alternatives to activate these update rules for the ODS
Any solutions:
-- Wondering if I am missing some procedure to transport.
-- Please feel free to post your views / suggestion in case you had a similar situation before.
Many thanks in advance,
BWer
Message was edited by: BWer

BWer,
If you collect your transport in a big lump of a single transport, the tranport connection may not organize it in the order of the proper dependency, so it is best to split it to separate transports as stated above to ensure the proper dependencies.
To fix the issue right now, you can either
1) take another transport through of only the updated / activated update rule or
2) if you know what you are doing and if the client is okay with it, open the system, activate the update rule and when prompted for a transport, create a new one and go to SE10 to clean up that repair transport by deleting the subtasks.
I would probably recommend option 1 for you. I only do option 2 if it is an emergency and there is no transport window for another week or longer or it just simply cannot wait.

Similar Messages

I have recently updated my CC programs to the latest version and now all of my files wont open by default into their respective programs, only if I open the program and go to file open and open the file from there. How can I fix this?

I have recently updated my CC programs to the latest version (CC2014) and now all of my files wont open by default into their respective programs, only if I open the program and go to file>open and open the file from there. How can I fix this?
I have tried 'Open with' and the version of the program now installed on my computer isn't even suggested as an option and when I browse for it, the file wont open with it anyway

On Windows (don't know about Mac), the latest version will always take over the file association, and become the default for indd files. It's impossible to change it.
But there is a plugin for ID that makes this possible. Never tried it myself.
https://www.rorohiko.com/wordpress/downloads/lightning-brain-soxy/

HT201269 my pc crashed and i no longer have the music i used to have, how can i sync my ipod w/ out loosing all of my music. and also how do i update my ipod only has a partial version of ios4

My pc crashed and i no longer have the music i used to have, how can i sync my ipod w/ out loosing all of my music. and also how do i update my ipod only has a partial version of ios4

It has always been very basic to always maintain a backup copy of your computer for this very occasion. USe your backup copy to put everything on the new computer, then sync.

It seems after the latest software update, my iphone 4 has issues with the phone and voicemail locking up as well as opening random apps. Any thoughts?

It seems after the latest software update, my iphone 4 has issues with the phone and voicemail locking up as well as opening random apps. Any thoughts?

Hi clintfromid,
Thanks for using Apple Support Communities. I would recommend closing all your apps and restarting and maybe resetting as good initial troubleshooting steps for this:
iOS: Force an app to close
http://support.apple.com/kb/ht5137
iPhone, iPad, iPod touch: Turning off and on (restarting) and resetting
http://support.apple.com/kb/HT1430
Cheers,
- Ari

A client has sent me an indesign file I cannot open. She says she has updated to Indesign CC 2014. I am a CC member and fully updated my own software but cannot open the file she has sent me, not even if she saves as an IDML, how do I resolve the problem?

A client has sent me an indesign file I cannot open. She says she has updated to Indesign CC 2014. I am a CC member and fully updated my own software but cannot open the file she has sent me, not even if she saves as an IDML, how do I resolve the problem?

There are a few things to try.
First, if this file came to you vial email attachment, it could have been corrupted. Ask her to zip the file and send it again. That sometimes helps.
I suppose there's a chance that the file is already zipped, so see if that's the case and unzip it if so.
If the file name doesn't end with .indd, add it and see if that helps.
If you are double-clicking, try File>Open from within InDesign.
Last (and I know this sounds like a joke, but I've seen it many times), sometimes people attach a Mac Alias or Windows Shortcut instead of the actual file. What is the file size? If it's really small, that might be the reason.
Also, no offense intended if some of this sounds like stuff you have already tried. I don't know what you know, so I'm just spit-balling.

Update rules deactivating

Hello All,
In the my productive BW system, a set of update rules became inactive. They were active one day - inactive the next. The system is closed, and no transports moved. No one opened the system. When I double-click on the update rules, it says the rules were modified by 'IMPACT' (what I usually see when I change a data target), at a certain time in the morning - and that - sure enough - they were deactivated due to a change in the data target.
To fix the problem, I had my Basis team open the system and I reactivated manually. There no issues here - the rules just reactivated. Further, the rules from the supposedly changed data target were active - meaning the data target did not, in fact, change. I am on BW 3.5, SP 20.
1. Has anything like this ever happened to anyone else?
2. Does anyone have an explanation for how this could occur?
3. Is there a log that either I or Basis could go to to try and see what happened?
4. Does anyone have any advice about what else I can try to do to diagnose this issue?
Thanks.
Dave

Hi,
There are circumstances where your IPs fails with error " Inactive update rules "
Like,
Suppose a load was running and u cancelled it but the processing of packets is progressing.
In the mean while if you repeat the same IP, then we will be getting this error as "Inactive update rules". This is because your update rules are being used by its previous load.
To avoid this, you have to wait till the processing of old load is over. After that if you repeat, It will become successful.
At any point of time same update rules cannot be used in parallel.
Hope it will be useful.
Regards,
Vamsi
*Assign points if useful.

Folio Builder: An error has occurred opening the source file for the article layout.

I have been working on a Folio. When I sat down to work on my folio, I was instructed by indesign to update my Folio producer tools, which I did.
Since then I can no longer view any article layout from that folio in indesign. Indeed any folio that I create that does not reside on my desktop give the same problem. I can import articles, add articles and they all upload to the proper place at adobe and I can view them. But I simply cannot open them up through folio builder as I previously.
The exact error message is as below:
An error has occurred opening the source file for the article layout.
The InDesign file for the layout cannot be found.
Another strange thing that seems to be happening is that the folio will randomly reoder the articles in the folio.
I have dumped my indesign prefs, tried creating an entirely new project, made a new account and even reinstalled the entire software.
But the problem of opening an article that I have imported or added to a folio, simply not being found to open has got me stumped. I can't proceed with a major project until I can sort this out.
Can anyone help.
Many thanks
Steve
The problem initially seemed very similar to the one linked below, but I dont get the content generation error
http://forums.adobe.com/thread/901804?decorator=print&displayFullThread=true

Questions about the Adobe Digital Publishing Suite should be posted in the DPS Forum.
http://forums.adobe.com/community/dps

I downloaded the iPhoto update and now it won't open the library on my external hard drive telling me it is locked (which it isn't) what do i do?

i downloaded the iPhoto update and now it won't open the library on my external hard drive telling me it is locked (which it isn't) what do i do?

What version of iPhoto?
What format is the disk?

AutocapitalizationType only has effect on the first set??!

Anyone encountered using autocapitalizationType or autocorrectionType? It seems that setting of these properties of a UITextField only has effect on the first set. Once you start typing, you can't stop it. I'm not sure what is required to reset the bahviour. Any ideas?

Changing it does not affect the passwords already set, but you can expire the passwords of your users and hence making them change their passwords. Which might cause a bit of anger (passwd -f <user>).
.7/M.

My iPad only has sound when the earphones are plugged in. The switch that controls the volume works then, but not when I take the earphones out. Suggestions?

My iPad2 only has sound when the earphones are plugged in. The volume switch works then too, but not when I take the earphones out. Suggestions?

it's a hardware issue
https://discussions.apple.com/thread/1343532?start=315&tstart=0
more here
iphone stuck in headset mode

"An error has occurred opening the package file" in InCopy

Hi there,
I have created an InCopy package file from InDesign CS3 (Mac). I am able to open this package file in InCopy CS3 (Mac) without error. However, two editors working in InCopy CS4 (Windows) on different machines receive the following error message when trying to open the .incp file:
"An error has occurred opening the package file"
I have read AnneMarie's excellent cautionary tales about working in a mixed CS3 / CS4 environment, but my understanding was that simply opening the initial .incp file was unlikely to produce an error.
Can anyone suggest what might be causing the error? Should we conclude that the error stems solely from a CS3 / CS4 conflict?
Thanks!
--Stephen

Great tip about the masked filetype, I hadn't realized these packages were so easily extractable.
However, the error message you're receiving is adding a new layer of complexity. A quick search on these forums reveals this thread:
http://forums.adobe.com/message/2278850
That thread suggests to me that the error may be related to Snow Leopard. We're using Mac OS 10.5.7 here at work. Could I trouble you to open the file on your Windows machine to attempt to replicate the same error we're receiving in Windows here?
And are there any known issues that could prevent a user from opening a package file?
Thanks.
--Stephen

After the latest update was completed, I couldn't open the firefox browser. I received an application error. I tried restarting the Windows OS but no change. How do I fix this?

After the latest update was completed, I couldn't open the firefox browser. I received an application error. I tried restarting the Windows OS but no change. How do I fix this?

If not this:
http://www.mcelhearn.com/deleting-the-itunes-album-artwork-cache-folder-may-reso lve-problems-with-album-art-displaying/
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- delete all music and resync
To delete all music go to Settings>General>Usage>Storage>Music>Tap edit in upper right and then tap the minus sign by All Music
- Reset all settings
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup. See:
iOS: Back up and restore your iOS device with iCloud or iTunes
- Restore to factory settings/new iOS device.

My iPad crashed when I updated latest iOS software. After resetting the system, I am unable to get back Pages, Numbers and Keynote Apps. Anyone has same problem? And how can I get back the apps?

My iPad Air crashed after updating latest iOS software. After resetting the system, Pages, Numbers and Keynotes are not available. How do I get the apps back into my iPad?

You can also re-download the apps.
App Store>Purchased>Re-download apps

TS3276 I created 2 Gmail addresses. My Mac recognizes and accept only one name in the System Preferences

I created 2 Gmail addresses. My Mac recognizes and accept only one name in the System Preferences.
When I send a mail with one of the address, the recipient receives it with this address, however, if he replies, the incoming address will be the second one? ? ?

I've never had a problem with multiple email addresses. My ISP's email account has multiple accounts and the same SMTP server, no problem.
I can't speak for GMail as I only have one, and that is my spam email account, so I don't really care what it sends.
I really don't understand your response.
What was "reviewed" and what was "ok" about it?
Their suggestion was to open a different session for each Gmail account.
"Different session." What does that mean?
Gmail is a very bizarre email server. It was designed to be web-based, but due to demand, they made it pseudo-compatible with POP and IMAP.
If you move email out of the Inbox, Mail will reply using the "default" email account, not necessarily the one that was originally associated with the message. Being that Gmail doesn't really have mailboxes or folders, but has tags it calls "Labels," it may have something to do with that issue.

An error has occurred in the system DV1CLNT400 while copying the document

Hi All,
While creating complaint confirmation i am getting below mentioned Errors in ECC.
Can any body provide configuration settings.
An error has occurred in the system DV1CLNT400 while copying the document
Message no. CRM_ORDER_MISC 020
Diagnosis
Errors have occurred while transferring the document into another system. Refer to the enclosed log to view the error messages.
Transmission log
No operating concern has been assigned to controlling area 1001 (Notification E KE 300)
Error occurred during determination of profitability segment (Notification W IAOM 025)
Error occurred during creation of settlement rule (Notification I IAOM 046)
Regards,
Teja

Hi,
From the nature of Error messages, it looks like these are related Customization settings. As you mentioned your SAP CRM system is connected to SAP ERP system, so Controlling documents and other account postings are happening there.
So, the best approach will be to get in touch with your functional consultant who will be the best person to guide you with the scenario and the respective process setup. You can also have a look at SAP HELP about the integration of the CRM and ERP systems along with the data exchange.
Hope this will help.
Thanks,
Samantak.

Update rules deactivated only has to open the system..

Similar Messages

Maybe you are looking for