Update SAP System with other User ID (Not WF-BATCH)

Hello Experts,
Please read the below requirement and suggest me the solution:
I am implementing separation workflow for my client. Once the manager clicks on submit in MSS Portal, notification number (PCR) will be generated. User WF-BATCH starts the workflow and updates the Infotypes in SAP System. As per normal process, all the Infotypes are updated By (Changed by) user WF-BATCH in background.
As per my client requirement, the records should be updated by user BATCHUSER instead of WF-BATCH. Is it possible? How to meet this requirement? Please let me know. Thanks.
- Krishna.

Hi,
If the Infotype update via workflow, it will show WF-BATCH only. This you can't change, previously your client would have updated the Infotype via scheduling the background program through the User id BATCHUSER.
If the WF-BATCH  update the right data, then there is No issue .
Regards,
Surjith

Similar Messages

  • IPod updates 2 touch with the new software, and from the update they are not connected with Time phase. They appear calling but never they enter the calls. I make calls with other users and if one connects but in these two not from the update

    iPod updates 2 touch with the new software, and from the update they are not connected with Time phase. They appear calling but never they enter the calls. I make calls with other users and if one connects but in these two not from the update

    I use Firefox 95% of the time, and there's no problem with flash content (and I'm still at .55 - downloaded .64 last week but I haven't got round to making the change yet). At the rate they've been changing it recently it may well be out of date already .
    I've been trying it in Safari, too with no problems apart from You Tube, but that's because I'm blocking Google cookies.
    One thought does occur - if your Flash preferences are set to block all Local Storage, it may be that the problem site is trying to use Flash cookies (LSOs). I had this problem recently with the BBC iPlayer streaming content. Little Snitch notified an attempt to connect to a new URL - emp.bbci.co.uk.
    If I disallowed it, no streaming; when I allowed the connection, it still wouldn't stream, so I did a bit of digging and came to the conclusion that it was trying to set a Flash cookie. When I unblocked, lo and behold - streaming resumed as normal.
    I now have LSOs blocked in a more subtle way that lets the site think it's being set (but it ain't) and the streaming still works.
    As for permissions repair - always repair from local; the permissions on the original disc will have been superceded by updates and new installations of Apple software.
    DU needs to be reading the packages on the HD, not the (now out of date) install disc.
    The recurring repair messages are normal and don't mean anything's wrong. As long as the final message is 'repair complete' there's no need to dwell on it.
    http://support.apple.com/kb/TS1448 (for Leopard and Snow Leopard - Lion no doubt has it's own set).

  • HT1923 I have a Vista Operating system with 2 users.  Somehow I got two different play lists each with one user.  One is too big for the storage and has a vast amount of duplicates.  Can I delete the one that is twice as large and then access the other li

    I have a Vista operating system with 2 users.  Somehow I got two diffent libraries for the users.  How can I delete the one and then access the correct library on the other users profile?

    Use the trackpad to scroll, thats what it was designed for. The scroll bars automatically disappear when not being used and will appear if you scroll up or down using the trackpad.
    This is a user-to-user forum and most people will post on here if they have problems. You very rarely get people posting to say there update went smooth. The fact is the vast majority of Mountain Lion users will not be experiencing any major problems with the OS, or maybe with apps which are not compatible, but thats hardly Apple's fault if developers don't update their apps.

  • File system management when sharing photos/music with other users in Mac OS

    I'm a new convert from the Windows world. I'm trying to setup multiple accounts for each user within my household. However, I'd like us to all share the same set of folders for photos within iPhoto and music in iTunes. Is it best to just used the "shared" folder instead of keeping them in the standard home directory and trying to share those folders with other users? What is the best approach to this. I would imagine most people do this for managing their music if not photos as well. Just trying to learn best practice on the file system management before I copy over gigs of files from my old PC.
    Thanks much,
    champlir

    champlir
    Welcome to the Apple Discussions. This might help with iPhoto.
    There are two ways to share, depending on what you mean by 'share'.
    If you want the other user to be able to see the pics, but not add to, change or alter your library, then enable Sharing in your iPhoto (Preferences -> Sharing), leave iPhoto running and use Fast User Switching to open the other account. In that account, enable 'Look For Shared Libraries'. Your Library will appear in the other source pane.
    Remember iPhoto must be running in both accounts for this to work.
    If you want the other user to have the same access to the library as you: to be able to add, edit, organise, keyword etc. then:
    Quit iPhoto in both accounts
    Move the iPhoto Library Folder to an external HD set to ignore permissions. You could also use a Disk Image or even partition your Hard Disk.
    In each account in turn: Hold down the option (or alt) key and launch iPhoto. From the resulting dialogue, select 'Choose Library' and navigate to the new library location. From that point on, this will be the default library location. Both accounts will have full access to the library, in fact, both accounts will 'own' it.
    However, there is a catch with this system and it is a significant one. iPhoto is not a multi-user app., it does not have the code to negotiate two users simultaneously writing to the database, and trying will cause db corruption. So only one user at a time, and back up, back up back up.
    Finally: If you’re comfortable in the Terminal, and understand File Permissions, ACL’s etc., some folks have reported success using the process outlined here . (Note this page refers to 10.4, but it should also work on 10.5). If you’re not comfortable with the terminal, and don’t know an ACL from the ACLU, then you’re best doing something else... Oh, and the warning about simultaneous users still applies.
    Regards
    TD

  • Share and edit notes with other users

    Can I share and edit notes with other users in a standard app, e.g. notes, the same way I share my calender?

    Sharing of notes will require you to also share contacts, calendars and reminders (in other words, you will be sharing all data). 
    For a "shopping list", I would recommend you share a reminders list.  It is similar to sharing a calendar, but it would keep your contacts and other data separate.  Just my opinion.

  • Can I share some, not all music, with other users on same iMac?

    Hi,
    I want to be able to share some musice with other users on the same iMac?
    Is it possible to do without having to share everything?
    Thanks, Crankyhead.

    Create a playlist containing the music you want to share. Then select Preferences in iTunes and from there select the Sharing tab. Turn on "Share my library on my local network" then click on "Share selected playlists" and click on the playlist(s) you want to share.

  • Backend System with Release 701 are not supported

    SRM 5.0
    Extended Classic Scenario
    CCM 2.0
    When updating the vendors in SRM system using TC - BBPUPDVD getting the below error message :-
    Backend System with Release 701 are not supported
    Have checked in table - BBP_BACKEND_DEST, the backend entry is properly maintained.
    Can any one advice.
    Regards,
    Jayoti
    Edited by: SAP jayoti on Dec 7, 2010 1:11 PM

    The problem is resolved for vendor relication after applying the below notes 1313972 and 1372175.
    ECC sandbox seems to be in 701 release. When the backend system ECC is in release 701, vendor replication fails with the error message that 'Backend system release 701 not supported'. We need to apply notes 1313972 and 1372175 to fix this issue. I have applied them in Sandbox and the issue is resolved now.

  • How do I stop sharing mail with other users on my computer

    How do I stop sharing mail with other users on my Macbook pro?

    You may have to set up different user accounts in the computer if you wish to
    continue sharing the computer among other people, and only use the Mail app.
    Otherwise, if you use a webmail such as yahoo, gmail, or other, just use a browser
    and login each time; then there is no saving of your email to the computer as such.
    I've never used an email client software, nor had an ISP based email account. So
    my numerous computers have never downloaded email into software. No loss.
    But the answers do include setting up extra user accounts, not admin level, so the
    other users do not mess with the operating system; a standard account or just a
    guest account to use a browser to access web-based login email accounts, works.
    There are third-party email client for OS X, some are free applications, others are
    part of a larger browser product, such as SeaMonkey, & other Mozilla derivatives.
    They provide an email segment or client aspect; unlike Firefox that's a browser.
    Setup information should be within the Help viewer in the computer itself. Or by a
    simple search online, including the OS X version and any email client software
    your computer may have installed. Some browser software includes email client.
    Also there are several ways to go in this matter. I don't see questions, only answers.
    To learn how the Mail application works, if you want to import everyone's mail, then
    figure how to set up user accounts in the OS X. Or use web-mail & login by browser.
    Hopefully you can find the best solution for the unasked question.
    Good luck & happy computing!

  • RFC Send could not be resolved against SAP system because its metadata could not be obtained...EXCEPTION FU_NOT_FOUND RAISED

    Hello,
    I am getting the following error in sending IDOC to SAP via WCF-SAP adapter in BizTalk Server 2009. I have the SOAP header in the adapter mentioned below. Also, wondering what is the convension for Action URL? Is it always "http://Microsoft.LobServices.Sap/2007/03/Rfc/"
    + Operation name mentioned in the Orchestration? I would appreciate if anyone could help me resolve this error.
    The adapter failed to transmit message going to send port "SendReceive_PO_IDOC_TO_SAP" with URL "sap://CLIENT=111;LANG=EN;@a/123.456.789.101/00?GWHOST=123.456.789.101&GWSERV=sapgw00&ListenerProgramId=ABCDEF111&RfcSdkTrace=False&AbapDebug=False".
    It will be retransmitted after the retry interval specified for this Send Port. Details:"Microsoft.ServiceModel.Channels.Common.MetadataException: RFC Send could not be resolved against SAP system because its metadata could not be obtained. ---> Microsoft.Adapters.SAP.RFCException:
    Details: ErrorCode=RFC_EXCEPTION. ErrorGroup=RFC_ERROR_APPLICATION_EXCEPTION. SapErrorMessage=EXCEPTION FU_NOT_FOUND RAISED.  AdapterErrorMessage=An error occurred while determining the function interface of the RFC Send.
       at Microsoft.Adapters.SAP.RFCException.HelperThrow(Int32 retCode, String additionalErrorMessage)
       at Microsoft.Adapters.SAP.RfcClientConnection.GetRfcFunctionInterface(String rfcName)
       at Microsoft.Adapters.SAP.InternalRfcMetadata..ctor(String originalRfcName, SAPConnection sapConnection)
       at Microsoft.Adapters.SAP.SAPMetadataContract.ResolveOperationMetadata(String operationId, TimeSpan timeout, TypeMetadataCollection& extraTypeMetadataResolved)
       at Microsoft.ServiceModel.Channels.Common.Design.MetadataCache.GetOperationMetadata(String uniqueId, Guid clientId, TimeSpan timeout)
       at Microsoft.ServiceModel.Channels.Common.MetadataLookup.GetOperationDefinition(String operationId, TimeSpan timeout)
       at Microsoft.Adapters.SAP.SapFunctionMetadata.ResolveOperationMetadataUsingSdk(String absoluteName, String displayName, String funcName, String operationNamespace, SAPConnection sapConnection, Boolean isTrfc, MetadataLookup metadataLookup, TimeoutHelper
    timeoutHelper)
       --- End of inner exception stack trace ---
    Server stack trace: 
       at System.ServiceModel.AsyncResult.End[TAsyncResult](IAsyncResult result)
       at System.ServiceModel.Channels.ServiceChannel.SendAsyncResult.End(SendAsyncResult result)
       at System.ServiceModel.Channels.ServiceChannel.EndCall(String action, Object[] outs, IAsyncResult result)
       at System.ServiceModel.Channels.ServiceChannel.EndRequest(IAsyncResult result)
    Exception rethrown at [0]: 
       at System.Runtime.Remoting.Proxies.RealProxy.HandleReturnMessage(IMessage reqMsg, IMessage retMsg)
       at System.Runtime.Remoting.Proxies.RealProxy.PrivateInvoke(MessageData& msgData, Int32 type)
       at System.ServiceModel.Channels.IRequestChannel.EndRequest(IAsyncResult result)
       at Microsoft.BizTalk.Adapter.Wcf.Runtime.WcfClient`2.RequestCallback(IAsyncResult result)".
    For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp.
    SOAP Header:
    <BtsActionMapping xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:xsd="http://www.w3.org/2001/XMLSchema">
      <Operation Name="Send" Action="http://Microsoft.LobServices.Sap/2007/03/Rfc/Send" />
    </BtsActionMapping>
    Thanks,
    Tarun

    Hello Morten,
    The Send is actually just the name of the operation in Orchestration and it does not exist in SAP. Hence, do I really need to have the SOAP header in WCF-SAP adapter or can I send the IDOC without any SOAP header info? When I try to send without
    SOAP header I get the following error. Can you help me resolve this?
    The adapter failed to transmit message going to send port "SendReceive_PO_IDOC_TO_SAP" with URL "sap://CLIENT=111;LANG=EN;@a/123.456.789.101/00?GWHOST=123.456.789.101&GWSERV=sapgw00&ListenerProgramId=ABCDEF111&RfcSdkTrace=False&AbapDebug=False". It
    will be retransmitted after the retry interval specified for this Send Port.  Details:"System.ArgumentNullException: Value cannot be null.
    Parameter name: key
       at System.ThrowHelper.ThrowArgumentNullException(ExceptionArgument argument)
       at System.Collections.Generic.Dictionary`2.Insert(TKey key, TValue value, Boolean add)
       at Microsoft.BizTalk.Adapter.Wcf.Runtime.WcfClient`2.CreateChannelFactory[TChannel](IBaseMessage bizTalkMessage)
       at Microsoft.BizTalk.Adapter.Wcf.Runtime.WcfClient`2.InitializeValues(IBaseMessage message)
       at Microsoft.BizTalk.Adapter.Wcf.Runtime.WcfClient`2..ctor(IBaseMessage message, WcfTransmitter`2 transmitter)
       at Microsoft.BizTalk.Adapter.Wcf.Runtime.WcfTransmitter`2.GetClientFromCache(String spid, IBaseMessage message)
       at Microsoft.BizTalk.Adapter.Wcf.Runtime.WcfAsyncBatch`2.BatchWorker(List`1 messages)".
    For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp.
    Thanks,
    Tarun

  • Trouble in a SAP system with load balancing

    Hello masters:
    I had a trouble with workitems that came from a SAP system with load balancing. They doesn't receive the workitem ID in the UWL.
    I created another system in the portal as a "dedicated application server", and made the necessary configuration in order to replace the first one, and then my workitems worked fine.
    However, I would like to know what appened with the first system created as "system with load balancing". Why this system didn´t pass the workitem ID to the application (web dynpro abap) that execute the workitems?
    Thank you.

    I hope there was some missing configuration in the first case which was not replicating the workitem from SAP Inbox to UWL.
    Thanks
    Arghadip

  • App.server load balancing for SAP System with 1 PS

    Hi,
    In SAP CPS 7.0 (Build M26.12) I have a SAP system with Central Instance + 10 App.servers, but all instances are managed by 1 ProcessServer.
    After activating the "App.server load balancing" setting in SAP system definition the application servers are becoming visible in CPS with their load factors (number of BGD wp's on app.servers) and load numbers (number of active jobs on app.servers).
    This is so far fine, but the additional functionality is not working as I would expect, I have issues with 2 functionalities:
    1. Based on documentation after activating also the XAL connection the CPS should submit the job on app.server with best performance based on XAL monitoring data filling the TARGET_SERVER parameter.
    This functionality is not working for me at all
    2. A useful functionality after activating the "App.server load balancing" setting is that the ProcessServer is going to "Overloaded" status when all BGD wp's of SAP system are occupied, thus restricting submitting new jobs during overload situation. But I had an issue also with this functionality, after SAP system recovery from overload situation, the CPS still remained in Overload status (so no new jobs were submitted).
    As a workaround I had increased the treshold values for loads on all app.servers for this SAP system, what was fine for several days, but after a while I believe this was a reason of unexpected performance issues in CPS, therefore I have deactivated the 'App.server load balancing" setting at all for this ProcessServer.
    I would appreciate your feedbacks with this functionality.
    Thanks and Regards,
    Ernest Liczki

    Hi Preetish,
    This connect string option is to loadbalance RFC connections. These are balanced upon login, once you are connected to a particular application server (AS) you stay on that server until you reconnect.
    Since CPS uses multiple RFC connections, this will result in the connections being distributed over the available AS resources which is fine as long as they are generally evenly loaded. If you have certain AS hosts that are continuosly more loaded than the rest, then you probably don't want the CPS RFC connections to end up on these servers.
    The original question is about loadbalancing of batch jobs over the available AS resources, and this is done independent of the RFC connection load balancing. Even if all CPS RFC connections are pinned to the DB/CI host, you can still loadbalance jobs over the available SAP AS hosts, either by using SAPs builtin balancing, or the CPS algorithm by activating the checkbox as indicated in the first entry in this thread.
    Finally, to reply to Ernest's question: I believe there are some fixes on the app load balancing in the latest release, M26.17 should be available on the SWDC now.
    Regards,
    Anton.
    Edited by: Anton Goselink on May 29, 2009 9:06 PM

  • BBPGETVD - error:backend systems with release 700 are not supported

    Hi,
    When I am trying to replicate vendor data from EEC to crm 4.0 via BBPGETVD.
    I get the error message"backend systems with release 700 are not supported"
    Is anyone have Idea what is wrong? and how can fix it?
    Thanks,
    Rachel

    Yossi,
    I believe that standard transaction does not work with ECC 6.0.  The standard response would be to upgrade your CRM system to 5.0 so that you can download vendors from ECC 6.0.
    Bascially the vendor replication programs in CRM below 5.0 aren't really that reliable for delta downloads(one error will cause an entire load to fail).  So you probably at best should copy the SAP standards to generate custom load programs as a starting point.
    It is not too difficult and overcomes some of the restrictions that SAP puts in place(i.e. you can only use one number range for vendors downloaded, etc.).  This is definitely one of the weak points of CRM 4.0 that was fixed in CRM 5.0.
    If you have more questions on this let me know.
    Take care,
    Stephen

  • HT1444 I have recently acquired an update for my mac OX the program being the snow leopard, i have been forever inserting the disk only to have it ejected by my mac, hence, i am unable to update my system with snow leopard

    I have recently acquired an update for my mac OX the program being the snow leopard, i have been forever inserting the disk only to have it ejected by my mac, hence, i am unable to update my system with snow leopard, what can i do, as i have just paid out money for something which

    Worked like a charm and resolved my problem totally. The only issue I had is that, unlike the Computer (Mac OS). the iPad doesn't give constant visibility to what it is doing (feedback), so I wasn't initially sure it had done anything.
    When I opened my emailed message with .vcf file attached, and tapped the .vcf attachment icon, I saw activity on the icon for just a few seconds, then it reverted to the original with nothing apparently happening. After about 30 seconds, the secondary menut popped up indicating the transfer of 1200 addresses would be completed, if I approved the action. Another 10 to 15 seconds then transpired before the completed Contact list appeared on the ipad. So you must be patient, if you have a large Addressbook. That's reasonable,but unexpected lack of feedback left me wondering, like so many other things on the iPad.
    THank you for the assist. Apparently Apples Mac Genius people did not know this procedure, and I will pass it on to my local Apple Store Instructor.
    -- Chuck

  • Installing SAP system with MSCS

    Hi,
    Anyone can give me the steps for installing a SAP system with MS cluster?
    Window server 2003, MS. SQL 2005, SAP ECC6.0
    Regards
    Chin

    Hi,
    Refer SAP Installation guide in http://service.sap.com/instguides
    I will give an overview about the installation process.
    Basic setup of MSCS 5.2 for SAP involves 2 systems, we will name it as node A(First MSCS node) and B(Additional MSCS node)
    3 Cluster groups should be created for SAP, Database, Quorum
    MSCS should be configured between node A and B, test the cluster by moving the groups between node A and B. Its very important to note that, Quorum disk group should not be taken offline. If its goes offline there are chances of cluster getting crashed.
    Steps to be followed for SAP Cluster Installation
         In Cluster Admin, move the disk groups and shared disks to first MSCS node.
         On the first MSCS node, install the MS SQL Server 2005 64-Bit
                 In Cluster Admin, move the disk groups and shared disks to Additional MSCS node.
         On the Additional MSCS node, install the MS SQL Server 2005 64-Bit
         In Cluster Admin, move the disk groups and shared disks to first MSCS node.
         Install the Central Services Instance for ABAP (ASCS) on first MSCS node.
         Install the Central Services Instance for Java (SCS) on first MSCS node.
         Cluster the First MSCS node
         Install the Database Instance on the First MSCS node
         Cluster the Additional MSCS node
         Install Enqueue Replication Server for ABAP and Java(Optional)
         Install the Central Instance
         Install at least one Dialog Instance
    Before starting the installation, make sure that system logged on as Cluster Administrator.
    Hope it helps
    Regards
    KT

  • I can'nt open netweaver with other user at winxp

    hi!, I cannot open the Netweaver Developer Studio! when i open windows session with other user... It appears a screen that it says :
    "Problems during startup. Check the ".log" file in the ".metadata" directory of your workspace".
    I open this log file and it appears the following :
    !ENTRY Startup 1 0 Mar 12, 2007 09:26:34.221
    !MESSAGE Sap NetWeaver Developer Studio - Unknown Sap Internal Installation
    !SESSION -
    !ENTRY org.eclipse.core.launcher 4 0 Mar 12, 2007 09:26:35.565
    !MESSAGE Exception launching the Eclipse Platform:
    !STACK
    java.lang.reflect.InvocationTargetException
         at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
         at sun.reflect.NativeMethodAccessorImpl.invoke(Unknown Source)
         at sun.reflect.DelegatingMethodAccessorImpl.invoke(Unknown Source)
         at java.lang.reflect.Method.invoke(Unknown Source)
         at com.sap.ide.eclipse.startup.Main.basicRun(Main.java:291)
         at com.sap.ide.eclipse.startup.Main.run(Main.java:789)
         at com.sap.ide.eclipse.startup.Main.main(Main.java:607)
    Caused by: java.lang.reflect.InvocationTargetException
         at org.eclipse.core.internal.boot.InternalBootLoader.run(InternalBootLoader.java:861)
         at org.eclipse.core.boot.BootLoader.run(BootLoader.java:461)
         ... 7 more
    <b>Caused by: java.lang.UnsatisfiedLinkError: Native Library C:\Program Files\SAP\IDE\IDE70\eclipse\plugins\org.eclipse.swt.win32_2.1.2\os\win32\x86\swt-win32-2135.dll already loaded in another classloader</b>
         at java.lang.ClassLoader.loadLibrary0(Unknown Source)
         at java.lang.ClassLoader.loadLibrary(Unknown Source)
         at java.lang.Runtime.loadLibrary0(Unknown Source)
         at java.lang.System.loadLibrary(Unknown Source)
         at org.eclipse.swt.internal.Library.loadLibrary(Library.java:108)
         at org.eclipse.swt.internal.win32.OS.<clinit>(OS.java:46)
         at org.eclipse.swt.widgets.Display.internal_new_GC(Display.java:1291)
         at org.eclipse.swt.graphics.Device.init(Device.java:547)
         at org.eclipse.swt.widgets.Display.init(Display.java:1316)
         at org.eclipse.swt.graphics.Device.<init>(Device.java:96)
         at org.eclipse.swt.widgets.Display.<init>(Display.java:291)
         at org.eclipse.swt.widgets.Display.<init>(Display.java:287)
         at org.eclipse.ui.internal.Workbench.run(Workbench.java:1361)
         at com.tssap.util.startup.WBLauncher.run(WBLauncher.java:79)
         at org.eclipse.core.internal.boot.InternalBootLoader.run(InternalBootLoader.java:858)
         ... 8 more
    Thanks.I hope your help.
    Carlos R.Y.

    Ok, sorry... my english is very bad...
    Bueno, cierto, ayudó darle permisos a la carpeta  para mi usuario; pero, lo más importante, fue agregar lo siguiente al archivo C:Documents and SettingsAll UsersApplication DataSAPworkspaces.properties
    user=D:
    Datos de Usuarios
    user
    Documents
    SAP
    workspace
    y con ello se solucionó el proble...
    Thank you everybody...

Maybe you are looking for