Update table from SM30 with automatic Time Stamp

Hi,
I have created a table maintenance generator for updating table from SM30.
Now there are fields in my table which are CRETING TIME and CHANGING TIME. Both being TIMESTAMP field (datatype: RSDDTZNTSTMPS).
Is it possible while user updates records/create new record in the table from SM30, these time stamp field to automatically get populated.
Also is there any F4 help available for TIMESTAMP field?
ags.

Hi,
You need to do two things inorder to get the desired results.
1) Go to Screen Layout of the Screen created by table maintenance generator and make the date/time columns to DISPLAY ONLY. This will ensure that user is not able to modify the values at runtime
2) Write the code in PAI of the Module pool program to populate the values at runtime using Sy-datum/sy-uzeit. (Hint : Search for INSERT/MODIFY statements which will show the location before which you need to write your logic)
Regards,
Kshitija

Similar Messages

CDHDR table entry updation with different Time Stamp

Hi Experts,
I'm changing the Contract Partner First Name. The time stamp updation in Change Document Object DEBI is with UTC but the BUPA_BUP Object with Local Time Stamp.
We want both time stamp with the UTC.
Time Zone mentioned at SPRO level is UTC.
Have anyone faced such situation earlier?
Thanks and Regards,
Jyoti Shankar

Jyothi,
I'm not sure whether this answers your query or not but suggest you to look at these 2 FMs'
BUS_CUA_VARI_FUNCTION_CONVERT
BUS_LOCATOR_OKCODE
Ist FM uses table TBZ4 that uses GUI.
Probably this is the reason you view object BUPA_BUP in the table with GUI time.
Rgds
Rajendra

Multiple channel data with different time stamp logging

I have peaks and valleys from multiple channels with different time stamp but I am not able to log to a single file. Any idea on how to do this?
Attachments:
Single Point Peak Valley Log.vi ‏53 KB

Hi Dennis,
Sorry for that I have modified the VI.
Because the peak and valley of every channel will occur at different time and I want to log the peak/valley with the time stamp.
How can I log them on the same file.
Attachments:
Single Point Peak Valley Log_Mod.vi ‏53 KB

CUOM 2.3 sends multiple notifications for Event StoppedGSUPerformancePolling with same time stamps

Hi Alll,
I have a CUOM Version 2.3 which shows mutiple notifications per Device for Event StoppedGSUPerformancePolling with same time stamps. The message below is generated from the default All_Events for all devices.
Does anyone have a solution for that.
Regards Michael
This message is generated 8 times with the same time stamp in all messages.
** This message is generated from Cisco Unified Operations Manager **
ALERT ID                = 00012OW
CREATION TIME           = Sat 30-Oct-2010 16:31:57 CEST
MODIFIED TIME           = Sat 30-Oct-2010 17:00:58 CEST
STATUS                  = Active
SEVERITY                = Critical
MANAGED OBJECT          = 183.201.141.193
MANAGED OBJECT TYPE     = VoiceGateway
ASSOCIATED EVENTS       =
    Cleared:183.201.141.193:Unresponsive
    Active:183.201.141.193:StoppedGsuPerformancePolling
CUSTOMER IDENTIFICATION = Voice Port
CUSTOMER REVISION       = Voice Port

if you get SNMP timeout on multiple devices then the fault usually lies in the path that the polling follows to get to these devices and back to the server.
The problem obviously lies in the part path they have in common.
It is not unusual to see the highest backbone loads during the night, due to backups being taken.
Make sure the most important inter-switch links have no errors.
I would rather fix this then turn off alerting.
Cheers,
Michel

Updating table from stored procedure in TimesTen

Hi experts,
I am unable to update table from procedure; here is what I did -
Created and populated table -
Command> create table test_table(key integer,value integer);
Command> insert into test_table values(1,10);
1 row inserted.
Command> insert into test_table values(2,20);
1 row inserted.
Command> insert into test_table values(3,30);
1 row inserted.
Command> select * from test_table
> ;
< 1, 10 >
< 2, 20 >
< 3, 30 >
created procedure -
Command> create or replace procedure testtable_update(key integer,value integer) as
> begin
> update test_table set test_table.value = value where test_table.key = key;
> end;
> /
Procedure created.
Executed procedure -
Command> begin
> testtable_update(3,60);
> end;
> /
PL/SQL procedure successfully completed.
Command> select * from test_table
> ;
< 1, 10 >
< 2, 20 >
< 3, 30 >
I am not seeing update, in underlying table. What could be the reason for this?
If I do following it works -
Command> update test_table set test_table.value = 60 where test_table.key = 3;
1 row updated.
Command> select * from test_table;
< 1, 10 >
< 2, 20 >
< 3, 60 >
3 rows found.
Am I missing something?
Any pointers or help will be greatly appreciated.
Thanks

The problem is that the parameter names in your procedure are the same as the column names, hence the columns are being updated with the same values. You have two options:
1. Change the names of the parameters by adding a prefix. For example:
create or replace procedure testtable_update( p_ key integer,*p_* value integer)
begin
update test_table set test_table.value = p_ value where test_table.key = p_ key;
end;
2. Qualiflying the parameters with the procedure name.
create or replace procedure testtable_update(key integer,value integer)
begin
update test_table set test_table.value = testtable_update. value where test_table.key = testtable_update. key;
end;
Simon

Is it possible to get the updated table records based on date & time.

Is it possible to get the updated table records based on date & time in oracle.
Thanks in advance.

no, actually i am asking update records using 'UPDATE
or DELETE' statement, but not insert statement.
Is it possible?
I think we can do using trigger on table, but problem
is if i am having 20 tables means i have to write 20
trigger. i don't want like this.Of course it's still possible, typically you'll find applications with a column LAST_UPDATE, probably a LAST_UPDATED_BY and so on column. You don't say what your business need is, if you just want a one of query of updates to particular records and have a recent version of Oracle, then flashback query may well help, if you want to record update timestamps you either have to modify the table, or write some code to store your updates in an audit table somewhere.
Niall Litchfield
http://www.orawin.info/

In deleting an i message the previous message remains on the screen but with the time stamp of the deleted message . how do i fix this?

in deleting an i message the previous message remains on the screen but with the time stamp of the deleted message . how do i fix this?

Hey everyone in Apple world!
I figured out how to fix the flashing yellow screen problem that I've been having on my MBP! Yessssss!!!
I found this super handy website with the golden answer: http://support.apple.com/kb/HT1379
I followed the instructions on this page and here's what I did:
Resetting NVRAM / PRAM
Shut down your Mac.
Locate the following keys on the keyboard: Command (⌘), Option, P, and R. You will need to hold these keys down simultaneously in step 4.
Turn on the computer.
Press and hold the Command-Option-P-R keys before the gray screen appears.
Hold the keys down until the computer restarts and you hear the startup sound for the second time.
Release the keys.
I went through the 6 steps above twice, just to make sure I got rid of whatever stuff was holding up my bootup process. Since I did that, my MBP boots up just like normal. No flashing yellow screen anymore!!
(Note that I arrived at this solution when I first saw this page: http://support.apple.com/kb/TS2570?viewlocale=en_US)
Let me know if this works for you!
Elaine

Load / Update Table from a .csv file

Hi All,
I thought I would just throw this out there..be kind.
I have a requirement to build a page that allows the user to upload a excel (well I'll have them save it as a .csv) and upate an existing table in their schema.
I have successfully created a similar page for inserting into an existing table however my update is not working. Then I realized what the Oracle Application Express Tool does that for me on, LOAD DATA page. The feature I like best is that after browsing for the file and clicking next it shows the column header and the row data underneath. I would really like to duplicate the functionality of this page.
I looked into the flows schema found related procedures , for example wwv_flow_load_excel_data,but I'm lost on how to use them.
Is there a way to duplicate the LOAD DATA Page and fit it to meet the users requirement?
Also I have included my coding attempt :
CREATE OR REPLACE PROCEDURE exceltotable2
AS
NAME: exceltotable
PURPOSE:
REVISIONS:
Ver Date Author Description
1.0 11/17/2008 1. Created this procedure.
NOTES:
Automatically available Auto Replace Keywords:
Object Name: exceltotable
Sysdate: 11/17/2008
Date and Time: 11/17/2008, 2:02:03 PM, and 11/17/2008 2:02:03 PM
Username: (set in TOAD Options, Procedure Editor)
Table Name: (set in the "New PL/SQL Object" dialog)
v_blob_data BLOB;
v_blob_len NUMBER;
v_position NUMBER;
v_raw_chunk RAW (10000);
v_char CHAR (1);
c_chunk_len NUMBER := 1;
v_line VARCHAR2 (32767) := NULL;
v_data_array APEX_APPLICATION_GLOBAL.VC_ARR2;
v_rows NUMBER;
v_asset_id NUMBER;
v_new_location GINOS_LOCATION.ID_LOCATION%TYPE ;
sql_stmt VARCHAR2 (2000);
--delete from data_upld;
BEGIN
-- Read data from wwv_flow_files
SELECT blob_content
INTO v_blob_data
FROM wwv_flow_file_objects$
WHERE NAME = 'F32700/scannedforrdc.csv';
--(used this for testing)
-- WHERE last_updated = (select max(last_updated) from WWV_FLOW_FILE_OBJECTS$ where UPDATED_BY
-- = 'ADMIN')
--and id = (select max(id) from WWV_FLOW_FILE_OBJECTS$ where UPDATED_BY = 'ADMIN');
v_blob_len := DBMS_LOB.getlength (v_blob_data);
v_position := 1;
-- Read and convert binary to char
WHILE (v_position <= v_blob_len)
LOOP
v_raw_chunk := DBMS_LOB.SUBSTR (v_blob_data, c_chunk_len, v_position);
v_char := CHR (hex_to_decimal(RAWTOHEX(v_raw_chunk)));
v_line := v_line || v_char;
v_position := v_position + c_chunk_len;
-- When a whole line is retrieved 
IF v_char = CHR (10)
THEN
-- Convert comma to : to use wwv_flow_utilities 
v_line := REPLACE (v_line, ',', ':');
-- Convert each column separated by : into array of data 
v_data_array := APEX_UTIL.string_to_table (v_line);
-- Update assets with RDC location
-- First get the current location id of the RDC
-- Next take each serial number from the spreadsheet and update the location and rack details 
Select id_location into v_new_location from ginos_location gl, ginos_site gs, ginos_agency ga
where nm_office = 'OCFS Resource Distribution Center' and gl.id_site = gs.id_site
And gl.id_agency = ga.id_agency And ga.nm_agency ='Office of Children and Family Services';
-- test with only the serial number/location
UPDATE GINOS_ASSET SET ID_LOCATION = v_new_location WHERE NM_SERIAL = v_data_array(1);
-- Clear out
v_line := NULL;
v_rows := v_rows + 1;
END IF;
END LOOP;
END;
Any advice/assistance is always appreciated
Thanks
Moe

Dan
Thank You for your reply, I actually bookmark your site yesterday when googling this problem.
I am going to give it a try. I have ran through steps 1 through 4. Step 4 , I modified to my page.
Just a little more help..
do I put my update table code in the procedure (step 4) - how do I view and extract the information from the collection?
DECLARE
l_blob BLOB;
PROCEDURE cleanup
IS
BEGIN
DELETE FROM WWV_FLOW_FILES
WHERE name = :P103_UPLOAD;
END cleanup;
BEGIN
SELECT blob_content
INTO l_blob
FROM WWV_FLOW_FILES
WHERE name = :P103_UPLOAD;
csv.create_collection_from_blob(l_blob, 'CSV_UPLOAD', 'Y');
-- I looked in the ginodba schema (the ref schema for the app) for this collection but it's not there
cleanup;
EXCEPTION
WHEN OTHERS
THEN
cleanup;
RAISE;
END;
Thanks Again
MOe

Need to update table from Maintenance view (Very Urgent !!!)

Hi Abap Guru's,
I got a requirement where in I need to create a new Zprog so that it shld give a call to view v_abc and thru this view I need to update the table abc if any duplicate entries are entered then I shld popup a message.
Cld u plz help me out how to go further with this requirement and any suggestions...
if we create a table maintenance generator for the table abc then it will check for the duplicate entries are not ? if it checks for the duplicate entries then my job is done esaily but how to assign the zt-code to the table maintenance ?
awaiting for u r answer's and realyy appreciated with lots of points.
Regards,
Ravi V Ganji

Hi,
   table generator will check duplicate entries as any
   other table .
    table maintanance Generator is used to manually
    input values using transaction sm30
    follow below steps
   1) go to se11 check table maintanance check box under
      attributes tab
   2) utilities-table maintanance Generator->
      create function group and assign it under
      function group input box.
      also assign authorization group default &NC& .
   3)
    select standard recording routine radio in table
    table mainitainence generator to move table
    contents to quality and production by assigning
    it to request.
   4) select maintaience type as single step.
   5) maintainence screen as system generated numbers
      this dialog box appears when you click on create
     button
    6) save and activate table
   using sm30 you can create entries manually.
also check below thread to assign transaction code to
table generator
Re: Table Maintanance Generator
create transaction use se93
select parameter transaction and give below attributes
Transaction code      ZTX1
Transaction text      Maintain View ZSDCZTVIEW
Transaction        SM30            Screen             0
                                          From module pool
Name of screen field           Value
   VIEWNAME                       ZSDCZTVIEW
   UPDATE                         X

File name with Dateand time stamp.

Hi All,
I want to generate a file with a date and time stamp.
For that in File Receiver adaptor i am using option "Add Time Stamp" in File Construction mode. however it is generationg file name as: FileName_20082104_121211_645.txt . In this I don't know what these last three characters "_645" are? And In the File name i only want a file name with datetime stamp . I don't require underscore in between. for eg: FileName_20082104121211.txt (FileName_dateTime.txt)
Can anybody suggest me the way to achive this?
Thanks,
Atul

@FileName_20082104_121211_645
The date time stamp in XI's file adapter will be in that format. This is to avoid over writing of files created simultaneously at the same time. So the last 3 digits is a form of an unique id to distinguish between the same.
In case you want the format as FileName_20082104_121211, use the dynamic configuration and create the file name inside the mapping itself and pass it across.
To get an idea about the same, ref:
/people/michal.krawczyk2/blog/2005/11/10/xi-the-same-filename-from-a-sender-to-a-receiver-file-adapter--sp14 - an usage of the same.
http://help.sap.com/saphelp_nw04/helpdata/en/43/03612cdecc6e76e10000000a422035/frameset.htm

Append two files with added time stamp

Hi experts,'
MY Requirement is I need to pick two files from two different FTP Locations and append them to file receiver FTP Location with Added timestamp.
How to achive this as with append we do not get option of adding time stamp.
Other thing is I want all the appended files should be there in Receiver folder means like if we get two files today they should be appended to one and shld be put in Receiver folder then two files for tomorrow and they shoud be appended as a separate file in Receiver Folder.
How to achive this??
Regards,
Nidhi

Hi Nidhi,
>>MY Requirement is I need to pick two files from two different FTP Locations and append them to file receiver FTP Location with Added timestamp
Use BPM and pick the two files
>>Other thing is I want all the appended files should be there in Receiver folder means like if we get two files today they should be appended to one and shld be put in Receiver folder then two files for tomorrow and they should be appended as a separate file in Receiver Folder.
Use variable substitution and create the directory and filename dynamically...
Use Dynamic configuration module in receiver adapter and do as specified in this blog:
/people/madanmohan.agrawal/blog/2009/05/20/combining-three-different-aspects-of-pi-asma-af-module-and-variable-substitution-in-one-shot
Regards
Suraj

Writing arrays to text data with continious time stamp

Hi Friends,
I have the following problem.
I want to create a text file looking like this:
12,30,10, 10:30:00 12.05.2007
12,31,10, 10:30:00,1 12.05.2007
12,32,10, 10:30:00,2 12.05.2007
12,33,10, 10:30:00,3 12.05.2007
12,34,10, 10:30:00,4 12.05.2007
12,35,10, 10:30:00,5 12.05.2007
12,36,11, 10:30:00,6 12.05.2007
12,37,12, 10:30:00,7 12.05.2007
12,38,13, 10:30:00,8 12.05.2007
12,38,16, 10:30:00,9 12.05.2007
12,39,18, 10:30:01,0 12.05.2007
12,39,18, 10:30:01,1 12.05.2007
12,39,18, 10:30:01,2 12.05.2007
the first 3 values are read from a file ,recorded as array and than plotted in chart.
the beginning time (e.g 10:30:00 12.05.2007) is also read from a file and set as beginning of the chart with a property node. The problem is here , after I set the beginning time to the Chart I have nothing to do with it for the rest values, since samples/sec is also sent to chart.
So how can I write the a txt file including the time stamp with ms incrementations?
Thanks alot for your responces.
john

Hi John.
I would use a Time Stamp and "Format Into String" with e.g. %<%.1X>T.
Syntax details are in the LabVIEW Help - Search for "Format Specifier Examples".
Regards, Guenter

Help with saving time stamps to "write to measurement file" excel format.

I am having problems saving the timestamps from my data to the write to measurement express vi for excel. My incoming data is converted from dynamic data to a 1d array for processing, which I understand you lose the time stamp data. I added a new array for time stamps but this array then cannot be converted back to the dynamic data that is requested to go into the write to measurement file express vi. I would prefer to leave the data in an array to be saved rather than converting it to a waveform so is there any way to add the time stamps from my 1d array back into the write to measurement file?

I set it up to build a waveform now but I am still having issues with it saving the correct timestamp. The time just incriments for every second (as it did before converting the dynamic data to the waveform). I attached a screenshot.
Attachments:
waveform.png ‏36 KB

REVOKE insert on tables from use with DBA role

Hi
I have two users with DBA role granted. I want to remove insert/update capabilities of a certain tables from one of the users but keep the DBA role. Is this possible ?
Thanks

No.
Do not even think about messing with the DBA role!!
You cannot grant global privileges through a role, then ungrant select privileges from an individual.
What you need to do is to crate your own local DBA-like role (or roles). Grant the global privileges all DBAs need to your own DBA-like role and grant that to the DBAs. Then grant privileges on the tables to various roles and grant them to the individual DBAs. That way you can exclude the privileges you do not want to grant.
But, ultimately, you need to be able to trust your DBA to follow procedures, rules, and instructions. If you cannot, perhaps he should not be a DBA.

Can not insert or update [TABLE] from internal table in method

I've faced a problem with OO abap. I've tried to insert into [ TABLE ] from internal table, but i've got error msg after i compiled.
"An explicit work area is necessary in the OO context. Use "INSERT wa INTO [TABLE] itab""
After i changed to loop in work area and INSERT INTO [TABLE] VALUES gw_data., everything is fine, can compile and run.
This is error code.
METHOD set_data_to_table.
    REFRESH gi_data.
    CLEAR gi_data.
    IF gi_file[] IS NOT INITIAL.
* Set data for modify table
      LOOP AT gi_file INTO gw_file.
        MOVE-CORRESPONDING gw_file TO gw_data.
        me->conversion_input( EXPORTING im_vendor = gw_data-vendor
                              CHANGING ch_vendor = gw_data-vendor ).
        APPEND gw_data TO gi_data.
      ENDLOOP.
      INSERT [TABLE] FROM TABLE gi_data.
*      LOOP AT gi_data INTO gw_data.
*        INSERT INTO [TABLE] VALUES gw_data.
*        IF sy-subrc = 0.
*          COMMIT WORK.
*        ELSE.
*          ROLLBACK WORK.
*        ENDIF.
*      ENDLOOP.
    ELSE.
      MESSAGE 'No data found' TYPE 'I'.
    ENDIF.
ENDMETHOD.                    "set_data_to_table

Hi Matthew,
I think there is no difference in database insert between OO and non-OO.
The correct syntax according to ECC600 online documentation is
[Inserting Several Lines|http://help.sap.com/saphelp_erp2005vp/helpdata/en/fc/eb3a6d358411d1829f0000e829fbfe/content.htm]
To insert several lines into a database table, use the following:
INSERT target FROM TABLE itab \[ACCEPTING DUPLICATE KEYS].
This writes all lines of the internal table itabto the database table in one single operation. If one or more lines cannot be inserted because the database already contains a line with the same primary key, a runtime error occurs. You can prevent the runtime error occurring by using the addition ACCEPTING DUPLICATE KEYS.
Whenever you want to insert more than one line into a database table, it is more efficient to work with an internal table than to insert the lines one by one.
I think the syntax
INSERT my_dbtable FROM TABLE gi_data.
should work, your suggestion may lead to syntax error.
Regards,
Clemens

Update table from SM30 with automatic Time Stamp

Similar Messages

Maybe you are looking for