Update to leopard 10.5.8 or install Snow leopard

I have a big problem with my macbook pro 3,1. I can not update to leopard 10.5.8 or install the Snow Leopard. The problems are:
- When updated to 10.5.8 (now i found this problem also appears when updated to 10.5.6), after the update completing, the mac restart and it's screen will be dark. The mac was freeze. I have to install version 10.5 again.
- When install the Snow Leopard, after booting from the DVD, the screen also becomes dark and can not go further.
I'm the newbie of Mac so who knows to fix my problem please help me.
Below is my MBP information:
- Processor : santarosa 2,2GHZ
- Ram : 2G
- Boot Rom: MBP31.005E.B00
- SMC version: 1.16b3

Boot from your Leopard OD installer disk and from Disk Utility run Repair Disk.
If there are no repairs needed reboot to your internal hard drive and from Disk Utility in the Utilities folder run Repair Permissions.
Use the stand alone 10.5.8 combo updater to update from here.
http://www.apple.com/downloads/macosx/apple/macosx_updates/macosx1058comboupdate .html

Similar Messages

I installed snow leopard on my mac mini and now it takes roughly 10 minutes to boot

I have a mac mini 1.5ghz with 1gb of ram installed.
I was running leopard with the combo update (10.5.8) but decided to install snow leopard as some of my apps need 10.6.8 to run.
The mac now boots past the grey screen with the apple logo then goes to a blue screen where i can move my mouse but nothing else.
This lasts for roughly 10-11 mins and then finally goes to my desktop and sure enough everything works perfectly and fast too.
It used to boot in around 30 seconds when i had leopard installed. If it can not be fixed i will be happy going back to leopard but i dont want to lose anything when i install it.
Any advice would be appreciated
Thanks

Mac OS X 10.6: If you see a blue screen at startup .
You may need to reinstall Snow Leopard:
Reinstall OS X without erasing the drive
Do the following:
1. Repair the Hard Drive and Permissions
Boot from your Snow Leopard Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer.
If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
2. Reinstall Snow Leopard
If the drive is OK then quit DU and return to the installer. Proceed with reinstalling OS X. Note that the Snow Leopard installer will not erase your drive or disturb your files. After installing a fresh copy of OS X the installer will move your Home folder, third-party applications, support items, and network preferences into the newly installed system.
Download and install the Mac OS X 10.6.8 Update Combo v1.1.

PowerMac G4 Dual 1.25Ghz won't let me install updates to Leopard

Hi there.. I just bought a PowerMac G4 Dual 1.25Ghz and for some reason, I can't install Leopard through the DVD drive. I get an error saying something about <Base System> and when I did install it leopard by making the powermac a firewire drive, now I can't do any updates. I get a message that the file is corrupt and contact the software vendor. I tried doing a Repair Permission, but it wont do it and keeps going and going.... Has anyone had any issue like this?

First, did you install Leopard using a retail version installer. Using an installer from another Mac model won't work.
Second, is this the update file you tried to use? http://support.apple.com/downloads/MacOS_X_10_5_8_ComboUpdate
It's best to download the update file & install off line, rather than use the auto update feature. Repair permissions before & after installing the update.
 Cheers, Tom

I have a first generation MacBook Air that has been refurbished via the Apple store. I installed Snow Leopard about a year ago and now, my computer wont update! It will download the updates restart my computer, but then I get an error message!

I have a first generation MacBook Air that has been refurbished via the Apple store. I installed Snow Leopard about a year ago and now, my computer wont update! It will download the updates restart my computer, but then I get an error message and the computer wont restart!

What is a error message and what do you see when it appears?
Haven't much problem with Airs around here, since they have a SSD they tend to be more reliable.
Perhaps it was a bad update, have you ran through this list of possible fixes?
Do as many as possible, starting with #1. Until the problem is resolved.
Use the boot 10.6 USB instead of the disk of course.
Step by Step to fix your Mac

I have just installed Snow Leopard 10.6.3 and want to update my Safari 4.0.4 to the latest version. However, the latest Safari version needs at least Snow Leopard 10.6.8. What can I do?

I have just installed Snow Leopard 10.6.3 and want to update my Safari 4.0.4 to the latest version. However, the latest Safari version needs at least Snow Leopard 10.6.8. What can I do, please?

Go to the Apple Icon, Top Left of your Screen and Run Software Update...
Or go here > http://support.apple.com/kb/DL1399
and download and Install the 10 6 8 Combo Update...
Be sure to Restart your Mac after the Install.

I have paid and downloaded LION and want to update my IMAC, can i just run install and it keep photos settings etc from Snow Leopard or is a full reinstall with wiped hard drive, anyone have any experience of this and do i need to run a backup beforehand?

I have paid and downloaded LION and want to update my IMAC, can i just run install and it keep photos settings etc from Snow Leopard or is a full reinstall with wiped hard drive, anyone have any experience of this and do i need to run a backup beforehand?

Always backup your important data before upgrading to a new Mac OS X.
Lion doesn't erase the drive but better to be safe than sorry.
And run Disk Utility (Applications/Utilities). Verify and if necessary repair the startup disk before upgrading.
Using Disk Utility to verify or repair disks
Before upgrading read here > Lion upgrade questions and answers: Apple Support Communities
And here > What applications are not compatible with Mac OS X 10.7 "Lion"? What upgrade or substitute options are available for common incompatible applications? @ EveryMac.com

Battery update 1.4 won't install snow leopard

I bought a used macbook 2.0 2006 model. The battery in it was dead when I installed snow leopard. Now I have a new battery, but it will only charge to 92%. So, I installed battery update 1.2, which did nothing for the problem. Then I tried to install battery update 1.4 but could not get past the install screen. Is it because I have 1.2 installed and should I go to system core service and delete update 1.2 then install update 1.4

I have an update to my own post. Since I have a newly puhchased copy of Snow Leopard, I was able to call Apple tech support. Hear is what I found out from them. Battery update 1.4 is not compatable with Snow Leopard, it stops at Leopard. I still don't know why update 1.2 installed. I tried all the other things that Apple recomeds such as reset system management, zaping the pram and draining the battery.

Ever since I installed the update of Leopard 10.5.2 I cannot open itunes!!

Ever since I installed the update of Leopard 10.5.2 I cannot open itunes!!
I get a message that says:"The itunes library is locked, on a locked disk, or you do not have write permission for this file."
I did do a permissions fix with the disk utility and same problem!
Any suggestions???
I think I might be demanding my money back for this Leopard!

Below where you see the Read and Write permissions on that folder there is a little triangle next to the word Details. Scroll down a bit and you'll see a tab to click to Apply to Enclosed Items. If it says you have read and write on the main folder, click the Apply button to make sure that all folders inside the main folder also have both Read and Write permission.

Installed Snow Leopard OK, but when uploading the Mac os x Update Combined, it would not save. It said it could not connect to update server, but my internet connection is working?

Installed Snow Leopard OK, but when uploading the Mac OS X Update Combined, it would not save. It said it could not connect to update server, but my internet connection is working. Any suggestions on fixing?

Run software up date, write down the update name and version. Go to the Apple site and do a search for the updates one at a time and download them one at a time. Use an ethernet connection, sometimes software update "crushes large updates. I have experienced this before. Hope it helps. ATB

Lost wireless connection after installing Snow Leopard combo update.

Hi everybody. I installed Snow Leopard on my father-in-law's Mac Mini (one year old) over Christmas, as a gift. The upgrade went fine. Everything worked until I performed a SW update. It downloaded a mammoth 500+ MB combo update (wirelessly), installed it, and boom. No wireless.
His network has no security; it is open. The Mac could see/find the network, but timed-out when connecting. Connection Doctor and Network Diagnostics; all red lights. His Dell and my iPod Touch had no problem connecting. I tried switching user accounts, turning Airport ON/OFF, trashing Locations and using Automatic, inactivating interfaces, disabling firewall, restarting, PRAM reset, and probably some other things I can't recall.
I couldn't leave him without any Internet, and I didn't have a patch cable to try, so I restored him to 10.5 using Time Machine. His wireless went back to normal and is working fine. So he has my Christmas gift, but he can't use it.
I have seen some related experiences in this forum, but not quite the same. Anything I try will now need to be done remotely over iChat Screen Sharing, as he is 190 miles away. Thank you for any assistance.

Problem Solved..sort of. I was able to restore full connectivity by disabling the WEP encryption of the WIFI. This is very strange to me, prior to getting the ATV, WIFI was only rurned on for brief periods to allow my laptop to connect or when using a Sondigo wireless music bridge (great product BTW.) After enabling WEP I had no problems in connecting either the ATV or the Sondigo unit to the WIFI, there was however a problem with my laptop in that it showed a very solid connect to the WEP enabled network but I could not browse the internet. FWIW my router is a Linksys WRT54GX. Hopes this helps someone else

Installing Software Updates for Leopard 10.5.5

Hello, I am having difficulty installing software updates on my Macbook.
I get updates each week regarding my software. I click to install the updates, the computer restarts and begins to install the update, and then the screen that shows the installation progress seems to stop at a certain point on the installation status bar and remains like that for hours. When I try to refresh the screen or move around my cursor, the status bar remains the same and it never seems like the installation was completed. I end up forcing a shutdown and then restart the computer.
As a result, I am not sure if the software update is ever completed because everytime I try to update my software, the same things happens. Anyone know why this is happening?

See http://support.apple.com/kb/TS2383 which implies you should download and install the 10.5.6 update; however, I recommend that you copy the Upgrade folder's contents to another folder, rather than putting it into the trash, restart, and then try Software Update again. Note that the Update folder contains installers for previously downloaded updates, which you might want to retain. Once you update everything, you can move everything except the index.plist back into the folder.

Can't install Snow Leopard on MacBook Pro - DVD won't mount

I am unable to install Snow Leopard on my MacBook Pro as the DVD won't mount. This is an early 2008 vintage MacBook Pro, intel core duo...
I'm using a OS X Snow Leopard install DVD (family licensed). This DVD has been used to install 3 other Macs in my house without a problem (about a year ago), but cannot be used to upgrade my MBP. Actually, this disk mounted on the MBP exactly once - inserted with system up, the disk mounted. Upon running the installed (a year ago), the computer restarted but hung in boot. After getting the disk ejected and the computer restarted, the disk would never mount again. I've defered upgrade for a year but at this point need to upgrade my MBP at least to Snow Leopard and possibly Lion.
The problem doesn't seem to be with the DVD, since it continues to mount fine in other computers, and in fact a borrowed Snow Leopard DVD also will not mount on the MBP.
BUT ... the problem also does not seem to be with the optical drive in my computer, as it can read & mount the install/restore disks that came with the computer as well as other CDs and DVD ROMs. Only the Snow Leopard install DVDs fail to mount.
I've also tried mounting the 10.6 install DVD on my Mac Pro desktop, making it available over the network (ethernet) with DVD/CD sharing. I can mount the remote disk from my MBP that way, but when I launch the installer, the application launches (its own menus are displayed, I can quit from menu, for example) but does nothing -- no windows open, nothing.
I've also tried "Remote Install" (again with the DVD made available with the Remote Install MacOS X application on my desktop), but when I boot the MBP with option held down, the remote disk is not available as a startup disk.
Zapping the PRAM did not help.
Am off to the store to get an optical drive cleaning kit and a blank DVD big enough to burn a new disk image, but would appreciate any further ideas at this point....

Solution that worked: Copy the Install DVD to a USB flash drive and boot from that.
http://www.maciverse.com/install-os-x-snow-leopard-from-usb-flash-drive.html
Up and running with Snow Leopard now and working on the updates.

How do I install Snow Leopard while keeping files, applications, and settings

I need to update my system, I realized that I need Snow Leopard (quiet late) before Maverick. My question is, how can I install it keeping files and all the data. I found this on Internet, does it work?
Install Snow Leopard while keeping files, applications, and settings
If you follow these steps, the installer will replace your operating system if one is already present, but will preserve your account information and personal files. You may have to reinstall some applications, however.
Insert the install disc (or the first install disc if you have more than one) into your disc drive. Restart your computer while holding down the c key. This causes your computer to start up from the install disc rather than your hard drive. When you see the gray Apple insignia, release c .
The Mac OS X installer should open automatically. Follow the on-screen prompts to read and accept the license agreement and begin the installation. When prompted to choose a destination disk, select your preferred location and click Install.
When the Mac OS X installation finishes with the disc, restart your computer. After the installation completes, a configuration program may begin automatically if you are installing for the first time. You will need to supply basic setup information for your computer.
Update your system software to ensure that you have the most recent operating system components. From the Apple menu, select Software Update... , and then follow the instructions on the screen. Often, you will have to restart your computer, and you may have to run Software Update multiple times before it can completely update your system.

That's why you need to back it up. You won't need to restore the backup immediately afterwards unless something goes wrong during the upgrade, but you'll need it later; the drive will eventually fail.
(105428)

Re-installing Snow Leopard

My computer's been giving me a series of problems (repeatedly unsuccessful software updates, irregular/now non-existent iphone sync, issues with VMware, etc) so I now want to re-install Snow Leopard and start fresh. I've been using Time Machine to back up my files and applications on an external hard drive.
If I re-install Snow Leopard from the boot disc and choose to not restore from Time Machine backup (i.e., just install a clean copy of OS X), will I still be able to retrieve my files from time machine onto the newly installed OS? I've already tried the "restore from Time Machine" option (from a backup well before the problems arose) and that didn't resolve the issues I was having so I don't want to just restore and have the same problems come up again. Any thoughts?? thanks!

kezeench wrote:
... I'd have to go through my time machine backup drive and select folders one at a time to restore (music, applications, etc)?
yes. if you want to bypass either +setup assistant+ or +migration assistant+, that's the way to go.
however, it is not recommendable to migrate applications that way. especially apps that come by way of an installer put files in various locations of your HD. unless you know exactly where those files are, you are better off reinstalling apps the usual way.
in fact, what i would do is this:
once the new OS is installed, i would migrate account(s), network settings, and documents using the setup assistant. then i would reinstall apps manually.
i did this not too long ago when i migrated from my old powerbook G4 to my new mini. since i migrated everything but apps, the pref files for the applications came over and i didn't even have to re-enter serial numbers.
JGG

I have installed snow leopard 10.6.8 on my macbook, i got a problem that every time i want to save or put something on desktop it, says you dont have permisson why is this, also my dock want stay the same everytime i start up it defaults back?

i have installed snow leopard 10.6.3 on to my macbook which was currently 10.4.11, i wanted to do this so i can run Final Cut Pro 10 which needs 10.6.8 or higher. so i updated the snow leopard to 10.6.8 installed final cut pro ok. the problem i got is else where i cant save on put anything on desktop, it says i dont have permisson, and when i try and click on my documents same again. also i adjusted my dock to smaller added a few applications onto it, but every time i restart the laptop it defaults back why is this?!! so annoying. i had a look at my disk utilites and i have still got 10.4.11 on my Macintosh i can switch too? i installed the snow leopard 10.6.3 on my Data Disk. can anyone help me out why i am getting these problems and what i need to do to solve it?

disk0s2: I/O error.
disk0s2: I/O error.
The MBP's disk is damaged and requires replacement.
Genius Bar Reservations: http://www.apple.com/retail/geniusbar/

Update to leopard 10.5.8 or install Snow leopard

Similar Messages

Maybe you are looking for