Update with user id only when checked

Hello,
I am trying to have a tabular sheet in Apex 4.0 with a row in my database with a check box at the end. If the user wants to approve the row, he selects the box and hits submit. I then want to have update the row with the user's apex login name.
How can I use the check box to load the database not with a flag but with the user's name?
Thank you for your help,
Mark

Hi,
I think it is this old post why I have created that sample
Catching unique constraint error via Apex???
Regards,
Jari

Similar Messages

I wan't update using itunes, i want to make update using my phone, but when check for an update using software update in setting message appear " can't check for update....."?

i wan't update using itunes, i want to make update using my phone, but when check for an update using software update in setting message appear " can't check for update....."?

Reboot the device and see if the error happens again. Updating through iTunes is usually optimal, but the file size differs via Software Update on the device and iTunes (50MB vs ~800MB)

Automatic app updates in iOS 8, only when not signed in with Apple ID?

Just updated to iOS 8, and discovered an odd issue, as follows:
One of my favorite additions of iOS 7 was the automatic app updates, because I do not have access to the app store. My app store is locked under restrictions, but with automatic updates I had no need for the app store in order to update my existing apps.
Well, I just updated to iOS 8, and I find that there is only an option for automatic app updates when the app store is open, but as soon as the app store is locked through restrictions, the automatic updates option disappears. And to add to the mystery, the only way to get it back is by SIGNING OUT of my Apple ID. When I do that, the automatic music downloads option disappears, and it is replaced by an option for automatic app updates.
Is this intentional? Why on Earth is there no option for auto updates when signed in, only when signed out? I can't make any sense of it. Any help would be appreciated.
Other than that, iOS 8 is awesome so far.

Just updated to iOS 8, and discovered an odd issue, as follows:
One of my favorite additions of iOS 7 was the automatic app updates, because I do not have access to the app store. My app store is locked under restrictions, but with automatic updates I had no need for the app store in order to update my existing apps.
Well, I just updated to iOS 8, and I find that there is only an option for automatic app updates when the app store is open, but as soon as the app store is locked through restrictions, the automatic updates option disappears. And to add to the mystery, the only way to get it back is by SIGNING OUT of my Apple ID. When I do that, the automatic music downloads option disappears, and it is replaced by an option for automatic app updates.
Is this intentional? Why on Earth is there no option for auto updates when signed in, only when signed out? I can't make any sense of it. Any help would be appreciated.
Other than that, iOS 8 is awesome so far.

RPE-02150: Failed to connect with user... when deploying location

Hello.
I've created cube and 3 dimentions in OWB 10.2, then derived them to make business definition for Discoverer 10.1.
When I try to deploy this business definition, I get error "RPE-02150: Failed to connect with user xxx, password ***, connection null. Disco export file 5039.eex written to directory owb/deployed_files." The error appears at deploying location step. What feature is that?
Thanks,
Evgeni

Hi,
same situation, same behaviour. I've seen, that the location for the discoverer could only be of type 10.1 database in the lov of the location form. But the database is 10.2. Perhaps that might be the problem.
Do you have any other suggestions?
Ciao Stephan

Text field with promp msg only when the field is empty

I want to make a TextField with prompt message but The problem with google code was that the prompt msg is shown only when The textField is not clicked, I want to show the prompt msg even when the text field is clicked,when I type a letter inside the textField it vanishes and when i delete all of it, I'll see the prompt msg again and I want to Load the cursur at the text field when the page is loaded, How can I achieve that?

Not working!
One new problem I have confronted, I have edited the htm file with the previously mentioned code, yet, when i started flex again, the code was not there?
Is it a derived file?
If so how can I make permanent changes there?
i used the code:
private function onLoad(event:Event):void
focusManager.setFocus(this.textId);
As using
private function onLoad(event:Event):void
shows the red cross i.e. error at a particular step at the
<mx:Application.......
and the error shows as
Incorrect numbers of arguments. Expected 1.
I guess its a very simple problem yet I don't know why I am getting so complex.
I have faced certainly a nice problem, it sometimes works and sometimes doesnt,
when I run from the flex bulider it works, If I click on the html file it doesn't.. It may happen it wont work again in future.

Issues with Skype & Viber only when connected to m...

Hi there,
I am having serious connection issues on Skype and Viber and can't seem to work out why. Here is my setup:
-I am using a Macbook Air and iPhone 5, both of which were bought in the last year and both of which are completely up to date in terms of software
-On my Macbook Air, I am using the Skype application and Skype through Facebook
-On my iPhone 5, I am using the Skype application, Skype through Facebook and Viber
-On all of these applications, I am connected to BT Infinity with a download speed of 69.5Mb and an upload speed of 17Mb
Despite all of this, I have extremely bad connection on all combinations of device and application. It is not a problem with the two devices as they both work significantly better on other wifi connections. For example, my Dad's broadband is less than 10Mb in terms of download speed and has a terrible router but my iPhone can use Skype almost perfectly. Even on 3G I can call people on Viber through my phone and it's fine. It is also not a problem with the people I am speaking to as they experience no problems with the other people they use Skype or Viber with.
From all of this, I have concluded that it must be my BT connection but my general browsing is largely fine (not perfect) and, having spoken to BT support, it has been confirmed that my connection is officially working as it should be.
So I am completely stumped and extremely frustrated. I need to be able to use Skype and Viber as I have close family and friends living abroad and my conversations with them are spoilt by this issue.
Please could someone give me some advice as I have run out of ideas!
Cheers,
Rich

You shouldn't need to but if you want to try "forgetting" it on your devices then restart the device and remake the connection it might help. Have you tried connecting your mac by Ethernet to see how it performs.
When you first turned off Smart Set Up you said it seemed to be working. Is the slow down time specific? Have you tried a speed test when you get the poor connection. Disconnect from Skype or Viber and run a speed test.
http://speedtest.btwholesale.com/
You could try turning off "Smart Wireless". Download a Wifi Analyser app for you smartphone or use the free version of inSSider from forum member Keith Beddoe's website here. Sorry it's Windows only.
http://forumhelp.dyndns.info/software/insidder.zip
It will show you the wireless channels and which one your Homehub is on. You want to find the channel with the least congestion, ie. least number of users. Once you have that you need to change your homehub onto that channel.
See link how to change channel on homehub
http://bt.custhelp.com/app/answers/detail/a_id/14094
Another thing to try is Try giving the 2.4Ghz and 5Ghz frequencies different SSids. Just add a 5 to the end of the 5Ghz SSid so you know which is which. Check the 5 GHz Sync with 2.4 GHz: is set to NO.
Once you have done that "forget" the connection and then restart the device and log onto both. The device should then automatically switch to the strongest signal.
You'll need to connect your other devices that can use both frequencies to both SSids if you want them to be able to use both/either frequencies.
See this link
http://bt.custhelp.com/app/answers/detail/a_id/44798/~/i-have-problems-connecting-5ghz-and-dual-band...

Core Center under XP with user-rights only

I am using WIN-XP SP2 prof.
I have installed core-center in latest version.
Everything is alright, when i am logged in as a Admin.
But when i login as a normal user I can not start Core-Center via
Startup-Folder.
I don't want give the Admin-password to other users.
What can I do ?
Peter

Some other possibilites:
1. You can have the complete information if the data is submitted in FDF, XML, or XFDF. I opened the submit box in AA7 and noted the settings. The fact I can open it in AA7 was a bit surprising. The reason I suggest the data files is that they do not require extended rights and can simply be impored to the form on your end to get the identical results as if the whole form had been sent.
2. I could only play the media file, but that is likely a capability of AA7 rather than an issue with flash and such.
3. E-mail may be an issue. Some systems require additional work to be able to use E-mail for form submission. Prior to AA9, mailto require MAPI on the client machine.
Don't know if any of these help or not, but at least they are some more tidbits of info.

Error with Generic delta extractor when checking in RSA3

Hi,
I have created one Test Generic Datasource based on Table MARA.Delta specific field I mentioned is LAEDA(Last changed On). After creating I have generated the datasorce also. But when I check the datasource in RSA3, I am getting error if Update Mode is "D". Error is "An error occurred during extraction". I am not seeing this datasource in RSA7 (Delta Queue).
If I say Update Mode is "F", then extractor is working fine.It is fetching some records.
Your help will be appreciated.
Thanks
Sirineni.

Hi Sirneni,
Is your Init load in BW successfull. Only after
successfull completion of init load in BW the data source appears in delta queue RSA7 in R/3. Also check whether any materials are being changed in R/3 because u r delta is based on last changed date.
Regards,
Prakash B

IPhoto update with Maverick will only crop in landscape no matter how you drag the corners.

Not being a professional photographer, I use Iphoto for basic editing as well as organization. Prior to Maverick update and Iphoto update, when i used the crop tool and selected constrain and photo size (i.e., 8 x 10, 5 x 7 etc.) the crop tool would automatically change between landscape and vertical based on how you drag the corners of the tool. Since the upgrades, the crop tool will only allow you to crop in landscape. Any suggestions or does this need to be addressed in a software update? I know some of you will want me to use some other software (Apreture, Lightroom, etc.) not interested. I love just the basics. Thanks.

After setting the crop aspect ratio go back to that menu and at the bottom select Portrait. Now it's a two step process.
OT

OBIEE 10q problem with user authentication - only administrator is working

Dear colleagues, i am facing to problem in our OBI solution,
From some time I am able to connect only wih Administrator account. User accounts defined in rpd are not working. I am not using LDAP.
The error logs are enclosed:
Any idea what to check please?
Thanks for support,
Michal.
Stav: 08004. Kód: 2718234696. [NQODBC] [SQL_STATE: 08004] [nQSError: 10018] Access for the requested connection is refused. [nQSError: 46036] Internal Assertion: Condition dbIDs.size() == 1, file server/Metadata/Security/Src/SSDBAuthenticator.cpp, line 31. (08004)
Log1
[43030] : Oracle BI Server (64-bit) started. Version: 10.1.3.4.0.080726.1900.
2012-03-29 14:31:40
[16020] Metadata Database Type: Oracle 10g R2
Data Source Name: PRODLI1
Data Source Type: Oracle Database 11g Enterprise Edition Release 11.1.0.7.0 - 64b
2012-03-29 14:31:40
[46036] Internal Assertion: Condition dbIDs.size() == 1, file server/Metadata/Security/Src/SSDBAuthenticator.cpp, line 31.
Saw Log
Type: Error
Severity: 40
Time: Thu Mar 29 15:00:29 2012
File: project/webodbcaccess/odbcconnectionimpl.cpp Line: 371
Properties: ConnId-1,1;ThreadID-3856
Location:
saw.odbc.connection.open
saw.connectionPool.getConnection
saw.threadPool
saw.threads
Odbc driver returned an error (SQLDriverConnectW).
State: 08004. Code: 2718234696. [NQODBC] [SQL_STATE: 08004] [nQSError: 10018] Access for the requested connection is refused.
[nQSError: 46036] Internal Assertion: Condition dbIDs.size() == 1, file server/Metadata/Security/Src/SSDBAuthenticator.cpp, line 31. (08004)

Hi satya,
thank for your cooperation and help.
I checked:
1. Go --> settings--> Administrator--> Manage privilege--> access dashboard--> give permission everyone Fullcontrol.
It's O.K., same for access answers and deliveries
1. Are you created users in your rpd?
YES in rpd file in security manager "users", "groups"
2. which security are you implemented?
catalog object security
Object Level security by creating catalog groups
3. Are you changed any thing object level.
No.
I tried to create one new user "test" but I am not able to connect to application
I also tried to set one user to Administrators group in repository, reload BI, but without any success :-(

Can't sync Outlook with iCal - but only when I activate iCloud

I have seen discussions in the forums about problems syncing Outlook with iCal - however, that is not *exactly* my issue. I can sync them fine, until I put the resulting iCal calendar in iCloud. Then Outook (2011 for Mac) stops syncing with iCal (v. 5.0.3). I take it out of iCloud, it works. What I want to be able to do is: 1. Sync Outlook with iCal. 2. Sync iCal with my iPhone via iCloud.
I used to manually sync my iPhone (4s) with my work computer (which apparently I could go back to doing if I change the settings in my iPhone?) and just update my work calendar to get it on my phone (my home calendar syncs fine, but it's not integrated with Outlook). I don't want to only use iCal, because I get a lot of Outlook invites for meetings.
Is this a feature that's just not supported by Apple at this time? Do I need to upgrade my O/S? I'm using Mac OS X 10.7.5 (Mountain Lion).
In short, I just want my Outlook calendar on my iPhone (ideally, without having to manually sync).

What kind of iPad and iPhone are you working with.. and what Software version on (5.1.1) is the most recent..

Palette not updated with user.lib files

I took a certified driver file, put it in user.lib, rename the project file and containing folder. I opened the renamed project, change the VI icon colors of all project files, relink all missing files to user.lib directory, saved all the files, saved the project. Then I restart LV2014 and no menu appear in Tools User Libraries.
Has anyone tested this using LV2014 or older?
Rich J
Solved!
Go to Solution.

Just an FYI there is a Refresh Palette funciton under the Application Control >> Palette Editing which can be used for testing. It won't refresh the tools menu but it allows you to modify files and MNUs in the user.lib then call that refresh to see if it worked without having to restart LabVIEW.
Unofficial Forum Rules and Guidelines - Hooovahh - LabVIEW Overlord
If 10 out of 10 experts in any field say something is bad, you should probably take their opinion seriously.

Hiss with 5G when using SoundDock or similar ONLY when Backlight OFF

I've found this problem on two 30gig 5G iPods and I think it may be present on all.
-If battery is full (completely)
-If backlight is OFF
-iPod connected to a set of speakers via dock connecter AND the speakers control the volume, not the wheel on the iPod
Then, in quiet sections of music there is a noticable hiss from the speakers. This disappears as soon as the backlight goes on. Also not present if the iPod is charging (rather than charged already).
It happens on my Bose SoundDock and Belkin Auto Kit.
Also tried it on Kensington SX 2000 in an Apple Store - Same problem.
As a consequence the Apple store replaced my iPod. Now I've worked out about the battery, I think it is prenent on all 5G iPods, as it started on the replacement iPod as soon as it was fully charged.
Thoughts.....
AMD-PC Windows XP Pro

Hmmm, interesting thought Jon,
In my case it would be 50Hz Hum as I'm on the other side on the Atlantic.
Would you get such interference in a car though? I get the same problem with my Belkin Auto kit. This is basically a cig power adaptor with a small preamp in it. It connects to the dock connector and takes the line level audio, and preamps it and sends it to a 3.5mm jack that you connect your audio tape adaptor to. Same issue - hum/hiss with backlight OFF only when unit fully charged.
I've just taken to leaving my iPod not to turn off the screen, as I most use it powered.
Submitted the feedback as you suggested.

Load new data only when needed

I am trying to reduce the number of unnecessary load request to the server. I have this:
var ds1 = new Spry.Data.XMLDataSet("test2.php", "export/row", {sortOnLoad: "grade_id", sortOrderOnLoad: "ascending", distinctOnLoad: true, useCache: false, loadInterval: 2000});
But I want to update regions associated with this dataset only when i click a button, that way i dont kill the server , what is the best way to do that.

Call ds1.loadData(); when you click the button.

I duplicated a picture and now iPhoto (11) is cloning that picture replacing all the other photos and only when I click directly on them I can see the real picture! How can I solve the problem without losing any saved picture? Shall I re-install? Thanx

I duplicated a picture selecting CMD and D but, suddenly, iPhoto (latest version '11) started cloning that picture and replacing all the other photos with it.
Only when I click directly on one photo I can open it and see the real picture it is.
But the preview is always the duplicated one...
I tryed to duplicate another picture just to see if it turned out ok but the only changement was the duplicated picture!
I started repeating the second duplicated one instead of the previous one but my issue remained the same.
So, how can you help me to solve this problem without losing any saved picture?
Shall I re-install iPhoto completely?
Thank you very very much in advance!!

As Larry says, restoring the back up is the fastest and best solution. Otherwise:
Option 1
Back Up and try rebuild the library: hold down the command and option (or alt) keys while launching iPhoto. Use the resulting dialogue to rebuild. Choose to Rebuild iPhoto Library Database from automatic backup.
If that fails:
Option 2
Download iPhoto Library Manager and use its rebuild function. This will create a new library based on data in the albumdata.xml file. Not everything will be brought over - no slideshows, books or calendars, for instance - but it should get all your albums and keywords back.
Because this process creates an entirely new library and leaves your old one untouched, it is non-destructive, and if you're not happy with the results you can simply return to your old one. .
Regards
TD

Update with user id only when checked

Similar Messages

Maybe you are looking for