Updated! App-V: A Configuration Template for Deploying to Stateless RDS Clients on Citrix Published Desktops with Citrix UPM for Profile Management

I've updated my App-V Startup script that I use.  The new version includes Event Logging as well as detailed logging, and its in PowerShell finally)
Check out the wiki!
http://social.technet.microsoft.com/wiki/contents/articles/25318.app-v-a-configuration-template-for-deploying-to-stateless-rds-clients-on-citrix-published-desktops-with-citrix-upm-for-profile-management.aspx

I've updated my App-V Startup script that I use.  The new version includes Event Logging as well as detailed logging, and its in PowerShell finally)
Check out the wiki!
http://social.technet.microsoft.com/wiki/contents/articles/25318.app-v-a-configuration-template-for-deploying-to-stateless-rds-clients-on-citrix-published-desktops-with-citrix-upm-for-profile-management.aspx

Similar Messages

  • App-V: A Configuration Template for Deploying to Stateless RDS Clients on Citrix Published Desktops with Citrix UPM for Profile Management

    Please Vote if you find this to be helpful!
    App-V:  A Configuration Template for Deploying to Stateless RDS Clients on Citrix Published Desktops with Citrix UPM for Profile Management
    Just posted this to the wiki:
    http://social.technet.microsoft.com/wiki/contents/articles/25318.app-v-a-configuration-template-for-deploying-to-stateless-rds-clients-on-citrix-published-desktops-with-citrix-upm-for-profile-management.aspx

    I would not recommend this and keep the package cache and the client on the same non-persistent drive and enable the Shared Content Store. If you separate the cache and the App-V client they could get out of sync and strange behaviour can occur. 
    You can use a temporary local profile with Citrix UPM or UE-V and specify what to roam/save.
    You can use the Shared Content Store so packages will stream over the network. When the user logs on there is a publishing phase where shortcuts etc are created for the user, this will take some time.
    Are you using the App-V full infrastructure?
    Are you using a boot disk, partition or PXE in combination with PVS?

  • My iPod touch was stolen and recovered.  I can use my Apple id for this site but the theif changed the Apple id needed to update apps etc and I do not know how to delete his acct. Any help with this will be greatly

    My iPod touch was stolen and recovered.  I can use my Apple id for this site but the theif changed the Apple id needed to update apps etc and I do not know how to delete his acct. Any help with this will be greatly appreciate

    If the thief enabled activation lock on the device, then there is nothing that can be done.  Only the password for the Apple ID that it is locked with can disable activation lock.

  • Trying to update apps on iphone and getting error message, there is not enough available local storage to download these items. you can manage your local device storage usage in settings

    trying to update apps on iphone and getting error message, there is not enough available local storage to download these items. you can manage your local device storage usage in settings. What am I to do?

    The storage you purchased is in the cloud, and doesn't do anything with your pad.  Your problem is simply that you have too much content on your pad.   Go to settings, general, usage, and it will show you how much space you have avaliable on your pad.  If you let the screen sit for a while, all the apps will be displayed, and you can see how much stuff you have associated with each.
    You have to no option but to delete some of the content on your pad.  Videos, comics, pitcures and some music files use a lot of space.   The cloud allows you to leave stuff there, so you can get it when you need it.

  • Updating Apps using Apple Configurator

    How do you updates apps already on ipads using Apple Configurator?

    tmbethea, I'm in a similar boat but have found workarounds using a combination of Apple Configurator to deploy a base then using a commercial MDM to manage devices remotely for about 200 ipads spread throughout the US.  I'm using two different MDMs at the moment and can confidently answer most of your questions about either AirWatch or Good (hardly an MDM but has some MDM features).
    I have a similar discussion going on here:  https://discussions.apple.com/message/18942350#18942350

  • Number of SAP instance for IDM 7.1 IdP ? IDM 7.1 SP5 with UI also for 7.2 ?

    Hello,
    I've just read the SAP NW IDM Identity Provider Implementation Guide. It seems very interesting. One question though : it seems the Identity Provider must be deployed on a NW CE 7.2 system.
    So we end up having a NW CE 7.1 Ehp1 for IDM UI with IDM runtime, designtime and database (all on the same server) and we must have another server or another SAP instance for the IdP with CE 7.2 ?
    Will IDM 7.1 SP5 UI also be compatible with / be developed for CE 7.2 to avoid another SAP instance ?
    Finally will Windows 2008 be officially certified for IDM 7.1 ?
    Thanks in advance,
    Hervé

    Hello Petr, I think this might be a problem. Probably you would be able to do what you want to do within a portal setup, where IdM is providing content to that portal. However, the development would take place in the portal and not per se be a development in the IdM UI. As I understand it the IdM UI is configurable to some extent, but not changeable by customers.
    Rgds.
    Anders

  • TS3276 My mail app has vanished and hasn't functioned for a long time. I am using my desktop with Snow Leopard 10.6.8

    My mail app vanished. I can't use the mail app and need it resent to me. I can't see how to do it or where to get it for downloading. HELP.

    To reinstall Mail, first try to reinstall 10.6.8 > http://support.apple.com/kb/DL1399
    If it doesn't work, reinstall Mac OS X. Insert the Snow Leopard DVD, press C key while your Mac is starting and reinstall Mac OS X. You won't lose any file

  • 3gs no service after updating to ios 5 tried network reset, reset all settings and even restoring from back been with out phone for 3 weeks now need help telus cant find network problem and apple has bad customer support please help!!!

    my 3gs has no service after updating from ios 5 tried resetting network settings, resetting all settings and restoring from back up on itunes.
    telus cant find any network problems and apple is difficult to deal with.please help 3 weeks with no phone and $70 a month not happy.

    I have been having a similar problem for the last few days.Without warning the signal will just completely duck out leaving the device searching for several minutes before settling on a no signal message.
    Sometimes restarting the device, toggling data and 3g settings or toggling Airplane Mode will set things right. However, a lot of the time I've been left without a working phone.
    I don't believe this is a SIM issue, as I had to change my SIM only one month ago for another signal related problem. Again any help would be appreciated here as well.

  • I have been using firefox on my desktop with windows xp for years with no problems and suddenly refused to open. The error message reads "unable to locate component. plc4.dll was not found." What does that mean? How do I fix it?

    The error message also suggests that I unintall and reinstall firefox, I tried that but it does not fix the problem.

    Which security software (firewall, anti-virus) do you have?
    If you use ZoneAlarm Extreme Security then disable Virtualization and reinstall Firefox.
    Other security software may have similar features to prevent Firefox from updating files properly.
    See these pages for a similar issue with corrupted files:
    *http://kb.mozillazine.org/Browser_will_not_start_up#XULRunner_error_after_an_update
    *[[/questions/880050]]

  • TS3274 My iPad will not update apps.  It states it is installing but it will not complete the installation.  This has been going on for more than 24 hours.  What do I need to do?

    My iPad will not update apps.  It states it is installing but if never completes the installation this has been going on for more than 24 hours. What do I need to do?

    Try a reset:
    1. Hold the Sleep and Home button down (together) for about 10 seconds
    2. Until you see the Apple logo (very important)

  • I have 2 iPhones sharing an apple ID (mine and my partner). we have just created separate ID's now that family sharing is available. but the partner's ID wouldn't let her update apps purchased on my ID! Help Please

    I have 2 iPhones sharing an apple ID (mine and my partner). we have just created separate ID's now that family sharing is available. but the partner's ID wouldn't let her update apps purchased on my ID! Help Please

    This is happening to me also but only with certain apps. The message I get with the apps that won't update is "Update Unavailable with This Apple ID. This update is not available for this Apple ID either because it was bought by a different user or the item was refunded or cancelled".

  • Trying to update apps on iPad, but error message reads..."account not valid in US"?

    Unable to update apps...message reads "Account not valid in US".  The iPad was purchased in Canada, but for some reason, my account address shows me in US.  How do I update to Canada?

    Change to the correct store this way.
    Settings>iTunes and App Stores>Apple ID
    Tap your ID
    Tap View Apple ID
    Enter your password
    Go to country/region in the popup window to change the store.
    Or swipe down to he bottom of the App Store in the featured tab and tap on your Apple ID. Sign out of your ID and then sign in again and see if that changes the store for you.

  • Received mzfairplay.nullresponse_message Error when trying to update Apps.

    Hey,
    I just tried updating apps and received the "mzfairplay.nullresponse_message" error. Is this something new? I have plenty of space for updates...
    5s, 16GB - 2.63 GB free. 8.1.3

    There are problems affecting the stores : https://www.apple.com/support/systemstatus/

  • Options for deployment via Remote Desktop Services / Terminal Server

    Currently we have volume licenses for CS which is deployed via remote desktop services in a multi-server load balanced farm.
    When reaching out to support, they informed me that CC cannot be deployed via RDS/terminal services.
    Seeing that CS is discontinued, how does Adobe suggest deployment of their apps via RDS/Terminal services?
    The support rep really didn't have an answer for me.
    I find it hard to believe that Adobe's going to abandon deployment of their apps in the enterprise as things are moving towards thin clients rather than traditional desktops.
    We'd like to avoid needing to go VDI instead of RDS if possible.
    I'd imagine VDI would have the same licensing issues assuming you don't want to have a dedicated VM for each user rather than having a shared pool of VMs.
    Thank You.

    The only link I have is http://forums.adobe.com/community/download_install_setup/creative_suite_enterprise_deploym ent
    Otherwise, Adobe contact information - http://helpx.adobe.com/contact.html since this forum is about the "regular" Cloud

  • IPhone 6 plus not getting right iTunes account when updating apps

    New iPhone 6 plus. I have iTunes store and app store logged in to the right iTunes accounT. However, when I try to update apps it is asking me to sign into a different iTunes account I don't have the pasword for and don't want to use (my Mac book used to be my sisters...my phone is trying to log in to her iTunes when I update apps). Any idea how I can make it pick up the right account?

    Whose account downloaded those apps ? If you copied from them your sister's computer and she downloaded them onto that computer then they will be tied to her account - you will need to delete the apps from your phone (which will delete their content) and redownload them on your account for you to be able to download future updates on them on your account

Maybe you are looking for

  • New Computer, lost disc, have serial, can I put on new computer

    Does anyone know if I can download the software for elements 2.0 from their site. I have my serial number, lost the disc and want to install in n my new computer. I just got 7.0 and dont like it, it doesnt have the photomerge that 2.0 elements had. a

  • How to install Canon MG3170 printer to Macbook Air (mid 2012), both USB & wifi

    I have been trying to install the Canon MG3170 to my Macbook Air (mid 2012 version) using OS X Version 10.8.4. I followed the paper manual that came with the box & used the CD provided. In the midst of the installation, "AN ERROR OCCURRED WHILE TRYIN

  • File system - XI - ICH ( SCM 5.1 ) sytsem

    Dear XI experts, I have a scenario of XML file - XI - ICH system. I have around 3 yrs of ABAP + XI experience but have never worked on XI - ICH integration. kindly let me know. 1. what type of RFC destination is required to establish connectivity..ho

  • WebLogic Server 10.3.5 shows 10.3.4 components

    Hi, This may be a silly question, but I will ask it anyway. Why is it that when I run config.sh to create a WebLogic Server domain, it lists 10.3.4 components when I get to the Select Domain Source screen? For example, Basic WebLogic Server Domain -

  • Mail flow configuration.

    Scenario: Company abc.com mail server is hosted by a 3rd party hosting company. (mail.abc.com) I deployed an exchange 2013 server in the company abc.com. Created users similar to the users in the 3rd party host. When i sent mail from my exchange serv