Updates after SP1

Hi all
I am currently deploying an Exchange 2013, and want to update to latest level.
Normally, they are called CU1 for RTM, CU1 for SP1 etc.
But does the list reflected here:
http://technet.microsoft.com/en-us/library/hh135098(v=exchg.150).aspx
indicate that AFTER SP1 i need CU5 ?! and not as i would expect CU1 for SP1
Hope for an answer
Kenneth
Denmark

Correct. CU5 is cumulative and after SP1 which is CU4.
http://blogs.technet.com/b/exchange/archive/2013/02/08/servicing-exchange-2013.aspx
Twitter!: Please Note: My Posts are provided “AS IS” without warranty of any kind, either expressed or implied.

Similar Messages

"Application failed to evaluate" during OSD after SP1 Upgrade

Hi,
Today i upgraded out configuration manager from 2012 rtm to 2012 sp1. The update process completet without any errors but now i'm unable to install application during osd. The first application crashed with the message:
Installation job completed with exit code 0x00000000
Execution status received: 16 (Application failed to evaluate )
in smsts.log
I know that there are some gotcha's regarding application installation during osd after sp1 upgrade. I already did the following steps:
- Update the deployment type of the application in my osd task sequence
- Re-Add the Network Access Account
- Removed the first application in the task sequence to see if the problem is application related
- Checked the option "Allow this application to be installed.." in the application properties
- Reboot my site servers
I can install application via Software Center without any problems, also the software updates are working normally.
Thanks in advance

Hi,
How are things going? Please let us know if there is any progress.
Regards.
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

Error in completing the update after finishing downloading.

error in completing the update after finishing downloading. I tried to update my iphone 4 after it finished the downloading it says error in connection? I tried it on 4 times on different pc's but problem still the same. Can anyone help me with this? Even i tried to unlock my iphone but all in vain.:(

hi,
Thanks for the reply. I did not note down the error number, but ill try to do it again if its comes again will let u know. but the problem is same whether i unlock my cell or update it to 5.0.1.

Update after 2 months breaks my squirrelmail / imap authentication

Ok, updated after 2 months, normally expecting some issues, but nothing this bad.
Squirrelmail is used for remote hosts to access my server mail over internet.
This update broke authdaemon I think.
Here's output of authtest:
[root@cyclops log]# authtest mark pw(redacted)
ERR: authdaemon: s_connect() failed: No such file or directory
Authentication FAILED: No such file or directory
[root@cyclops log]#
Which is the same output as in my errors.log when a client tries to access imap.
How do I turn verbosity up to get more useful output?
EDIT: SOLVED
Forced REINSTALL of courier-authlib fixed it. WHY WOULD IT DO THAT?
That was part of the update I believe, but why would it bork the install on a basic update?
Last edited by 86turbodsl (2010-04-08 10:19:23)

Same problem here. For whatever reason, courier-impa is starting authdaemond and also stopping authdaemond directly after running the courier-processes in its init-script.
I hacked the script a bit, now it's working properly:
At the top, insert a line
AUTO_AUTHDAEMON="false"
Change the first if-clause to read:
if [ $AUTO_AUTHDAEMON == "true" ] ; then
and do the same for the second if-clause containing $AUTO_AUTHDAEMON.
That's it.
My complete init-script:
CI_DAEMONS=
AUTO_AUTHDAEMON="false"
[ -f /etc/conf.d/courier-imap ] && . /etc/conf.d/courier-imap
[ -z $AUTO_AUTHDAEMON_LAG ] && AUTO_AUTHDAEMON_LAG=2
. /etc/rc.conf
. /etc/rc.d/functions
case "$1" in
start)
if [ $AUTO_AUTHDAEMON == "true" ]; then
/etc/rc.d/authdaemond start
sleep ${AUTO_AUTHDAEMON_LAG}
fi
if [ ! -f /var/run/daemons/authdaemond ]; then
echo "ERROR: authdaemond is not running"
stat_fail
exit 1
fi
for daemon in $CI_DAEMONS; do
stat_busy "Starting Courier ${daemon}"
/usr/lib/courier-imap/${daemon}.rc start
if [ $? -gt 0 ]; then
stat_fail
else
add_daemon $daemon
stat_done
fi
done
if [ $AUTO_AUTHDAEMON == "true" ]; then
/etc/rc.d/authdaemond stop
fi
stop)
for daemon in $CI_DAEMONS; do
stat_busy "Stopping Courier ${daemon}"
/usr/lib/courier-imap/$daemon.rc stop > /dev/null
if [ $? -gt 0 ]; then
stat_fail
else
rm_daemon $daemon
stat_done
fi
done
restart)
$0 stop
sleep 1
$0 start
echo "usage: $0 {start|stop|restart}"
esac
exit 0
Last edited by mauritzius (2010-04-12 14:52:21)

SIS- Updating- Open Orders value and quantity not updated after delivery

Dear Guru's
in the SIS transaction MCTA
when i create the sales order the values in the fields
incoming sales ,sales,credit memo,open orders ,open orders etc
are getting updated correctly
but after creating the delivery,pgi and billing these values are not getting updated .like the reduce in the open order,open oerder qty they same as earlier afer creating sales order.
if i cancel the order then the values are again updated accordingly
can you please suggest me a solution for this problem,why this is happening of not geting updated after doing delivery and pgi
waiting for the reply
thanks in advance
ramana

Hi,
Your query revolve's around LIS reporting. For any reporting, SAP recommended solution is SAP BI
FYI SAP is not going to continue Support for LIS Based reporting.Developement on LIS based reporting is already stopped.
Companies still use this tool to manage their reporting.
Not all the key figures are updated by default. In your case you will have to carry out the enhancement.
Please go through the following path:
SPRO - Logistics General - Logistics Information System --- Check Help on Data Enhancement.
Rgds

Conditionally disabling record updation after query

Dear members
I've a single record block and I wanna conditionaly disable records updation after query has fetched data. Problem is that if I disable the record updation in Post-Query trigger then it checks the condition for the very first fetched record and it the condition is true, then Updation is disabled for all the fetched records, even if the next records dont meet the condition. I'm using forms-10g. Can u give a better solution??? thanx.

you have to use SET_ITEM_INSTANCE_PROPERTY to modify only one record:
BEGIN
    IF ... <your_condition> THEN
        SET_ITEM_INSTANCE_PROPERTY('YOUR_BLOCK.YOUR_ITEM1', UPDATE_ALLOWED, PROPERTY_FALSE);
    ELSE
        SET_ITEM_INSTANCE_PROPERTY('YOUR_BLOCK.YOUR_ITEM1', UPDATE_ALLOWED, PROPERTY_TRUE);
    END IF;
END;

My apps won't update after installing IOS 6.0.1. They get stuck. What's wrong?

Apps won't update after installing IOS 6.0.1. They get stuck. What's wrong?

You may of had a corrupted install. Connect to iTunes backup then restore. Or update the apps on itunes then sync to the iPhone

Unable to install Office updates after upgrading 8.0 to 8.1

I have a Windows PC that was upgraded from 8.0 to 8.1 last week. Ever since then there are 39 Office 2013 updates, including SP1, that will not install no matter what I do. The error listed is the dreaded 0x80070643. No Office older than 2013 is installed.
I've tried so far:
1. Online repair of Office
2. Uninstall/reinstall of Office
3. Windows Update repair x2
4. DISM /online /cleanup-image /restorehealth
5. Reset Windows Update
6. .NET repair (removal/reinstall)
There are probably a couple more things I did but I didn't get them written down. I've run out of ideas. Does anyone have any idea on how to get this fixed?
Jonathan

As it turned out, in addition to Office 2013 Home & Business that I had installed, Office 2013 Pro Plus somehow existed on the computer though the only visible sign of it was in Programs and Features. It wasn't in the Start Menu or in Program
Files. So how it was on there or why it only showed in Programs and Features I don't know, but it was definitely messing up Windows Updates.
Jonathan

Will they ever give me an update after 24 hours

I put my order 24th July, they gave me an estimate date on 12th, Aug for activation. but nothing happened on 12th, Aug. So I phoned BT customer service, they helped to have a check and said there was some issue with Exchange and they would work on it, then they asked me to call back after 24hours.
I called them today, a not very friendly customer service staff asked me to explain all the story, and she said, I will have a check, just after one minute, she told me, sorry, we have some problem with the system and we couldn't give you any update unitl Monday, it's just the date they will give me an update.
My doubt is whether they can give me an update then, they don't even send out an email to tell you what happend, everything you need to find out yourself and wait for 10 to 20 mins to get the perfect anwser. "we will give you an update after 24 hours"
Solved!
Go to Solution.

Hi Piaf,
Thanks for the posts and welcome to the forum.
I can help you with this. Please drop me an email to [email protected], include any order numbers that BT have supplied plus your full address. I will be able to locate your order from this info and let you know what is going on.
Cheers
Sean
BTCare Community Manager
If we have asked you to email us with your details, please make sure you are logged in to the forum, otherwise you will not be able to see our ‘Contact Us’ link within our profiles.
We are sorry that we are unable to deal with service/account queries via the private message(PM) function so please don't PM your account info, we need to deal with this via our email account :-)

PO item change is not updated after Delivery completion

Dear All,
PO item change is not updated in the PO at the completion of the delivery.for a particular line item. In our QA system, its updated but client is facing an issue with the production system. Pls check the attached screen which I got from QA. There is no such log in the production system. Kindly help me to have a solution for this.
Regards
Sujith

Hi Dev,
After we post the GR for a PO line item, PO history is updated (line) and at the same time that particular change log is available under PO line item. But in production system, said log is not updated after GR is completed fully.
Rgs
Sujith

Macbook pro - iPhoto keep prompting to update after Yosemite update. Error message when trying to update -This update is not available for this Apple ID either because it was bought by a different user or the item was cancelled

macbook pro - iPhoto keep prompting to update after Yosemite update. Error message when trying to update -This update is not available for this Apple ID either because it was bought by a different user or the item was refunded or cancelled.

I only have 1 apple ID and the same was used to set up this early 2011 macbook pro and iPhoto app. I don't want to loose out on any photos. I tried logging out of app store and back in but no luck. PLEEAASEE HELPP!!!
This problem has been reported by quite a few forum members, who skipped the update to iPhoto 9.5.1 while running Mavericks. In that case try to purchase iPhoto again instead of updating.
After making your backup try the following:
Uninstall iPhoto by deleting it from the applications folder, but do not empty the Trash.
Launch the App Store, click the "Store" menu, and sign in with your AppleID.
Open the main page of the App Store and search for iPhoto.
If iPhoto is listed as "Free", click the "Free" button to buy it with your current AppleID.
If it is not showing as free, there is no help but contacting the App Store Support, as Niel pointed out: http://www.apple.com/support/mac/app-store/contact/

While dealing with an external hardware i got a Java update4 request,but was not able to complete that update.After that when i switch on my Mac it shows reinstallation required.i was working with OSX 10.8.5,but after reinstallation now it is 10.7.5 .

While dealing with an external hardware i got a Java update4 request,but was not able to complete that update.After that when i switch on my Mac it shows reinstallation required.i was working with OSX 10.8.5,but after reinstallation now it is 10.7.5 .And while doing search for update it shows your software is uptodate..

Hi Hal,
One possibility, is a strange occurence when applying the big 10.5.8 combo, most people have to Repair Permissions twice in a row, then reboot.

APple MBP v1.3 Update after a Snow Leopard 10.6.4 reinstall

Is the Apple MBP v1.3 update part of SNow Leopard 10.6.4 Combo Update and if not how do I go about installing Apple MBP v1.3 update after I have already installed snow leopard Combo Update from 10.6.3?
From the APple Website the v1.3 update will only install if you have 10.6.3 Snow Leopard and might become an issue if trying to install it after 10.6.4 Combo Update has been installed.
So my question is:
Is the Apple MBP v1.3 Update part of the 10.6.4 Snow Leopard Combo update?
Thanks

Run Software Update. If it doesn't list Apple MBP v1.3 Update as an available update then you don't need it.

Acrobat 10 Pro: Unable to Install Updates After Virus Removed: Receive Error 1310 ?

Acrobat 10 Pro: Unable to Install Updates After Virus Removed: Receive Error 1310 ?
Attempted to re-install the original Adobe Acrobat 10 Pro from the disk provided with the purchase; and it has put me in a trial; and is requesting that I purchase the software I already paid for, two years ago.

You can try a repair (may need to go to Control Panel>Programs & Features). A reinstall is a last resort, but if you go there be sure to uninstall from the control panel, run http://labs.adobe.com/downloads/acrobatcleaner.html, and remove any part left of the Acrobat folder. Then reboot as the administrator and reinstall. Be sure to disable antivirus during the install.

Messages stuck in updating after Yosemite install

Messages stuck in updating after Yosemite install. Tried re-install of Yosemite and quit messages, still unable to access.

Hi,
Go to the ~/Library/Attachments folder. (well it should be a folder).
If it is not a Folder then rename it and create a New folder with the same name.
restart Messages.
Or if you have a Time Machine backup replace the Non folder item with an Original from just before the update.
9:22 pm Saturday; January 17, 2015
 iMac 2.5Ghz i5 2011 (Mavericks 10.9)
 G4/1GhzDual MDD (Leopard 10.5.8)
 MacBookPro 2Gb (Snow Leopard 10.6.8)
 Mac OS X (10.6.8),
 Couple of iPhones and an iPad

Updates after SP1

Similar Messages

Maybe you are looking for