Updates are not happening Mac 10.5

I am using Mac OSX 10.5
from Software update when ever I am trying to update
I get an error
"The digital signature for this package is incorrect. The package may
have been tampered with or corrupted since being signed by “Apple”.
Then I downloaded the updates they finally could not be installed.
http://support.apple.com/downloads/MacOS_X_10-5-6Update
http://support.apple.com/downloads/MacOS_X_10_5_7Update
http://support.apple.com/downloads/MacOS_X_10_5_8Update
after going through a few steps when I click to accept License agreement then
to select destination a screen comes in which all the hard disks
attached are red in color
and a message is there
"You cannot install Mac OS X Update on this volume. This volume does
not meet the requirements for this update."
Here are the snapshots
http://www.flickr.com/photos/48996087@N07/4770640508/
http://www.flickr.com/photos/48996087@N07/4770640512/
http://www.flickr.com/photos/48996087@N07/4770640514/
Also
To be able to mail the attachments to any one I have to copy paste them in a Pen
Drive and then go to some other computer and then attach in mail.The default browser is also behaving erratically what should I check.

tapas_mishra wrote:
Then I downloaded the updates they finally could not be installed.
http://support.apple.com/downloads/MacOS_X_10-5-6Update
http://support.apple.com/downloads/MacOS_X_10_5_7Update
http://support.apple.com/downloads/MacOS_X_10_5_8Update
I won't try to answer your other questions, but those updates are intended to be applied to the just-prior version. Try the 10.5.8 "combo" update:
http://support.apple.com/kb/DL866

Similar Messages

  • Sync between MacBookPro and iPhone 3G does not sync properly.  Calendars duplicate events but worse is that only contacts from Address book from letter T onwards sync.  Any contacts on iPhone which are not on Mac are lost during sync.

    Sync between MacBookPro and iPhone 3G does not sync properly.  Calendars duplicate events but worse is that only contacts from Address book from letter T onwards sync.  Any contacts on iPhone which are not on Mac are lost during sync.
    Solutions?

    No, I never really found an easy solution.  I believe it is an issue with some corruption in the iTunes database on the specific device.  In my case, both my iPad and iPhone now show duplicate stream songs if viewed through iTunes on my Mac, but they show different songs.  A couple years ago I had a similar issue on my iPhone, and Apple support suggested I back up the phone, completely reset it, and then restore it from the backup.  It did work, so I imagine it would probably work for my current issues with the iPhone and iPad.  But resetting and restoring an iPad or iPhone always makes me a little nervous that something will get lost.  When I did reset/restore the iPhone, I do have to say, the restore process was 100% perfect and I did not lose any data at all even though Apple support said I might.  If you try to go that route, I would suggest backing the device up both to a computer through iTunes, and to the iCloud so that you have a double backup.
    None of this really resolves the issue with how the iTunes databases are becoming corrupted on the apple devices though, so it is very likely to happen again until they fix it.  I have been unable to determine if there were any specific actions or conditions which caused the corruption to happen in the first place.
    Might be worth another call to Apple support, or dropping in the local Apple store if you have one near by.

  • Issue in Workflow- Field Update is not happening

    Hi Friends,
    I am facing an issue to update a check box field Released.
    I have created a task having Advance with Dialog opiton,Background processing to update the Checkbox field.
    The BOR Object type used is BUS1006 and method is CHANGE. Everything looks fine when tested the task as well as the workflow in test mode and it is working fine in both the cases. But some how, this field update is not happening over the CRM 2007 Web UI. We are assuming it is due to user authorizations or some other settings ( like assignment of backend user to the workflow)
    for doing this task. Can some one give us some pointers on this. This will be of great help.
    Thanks,
    Udaya

    Hi Imtiaz,
    I am new to this. Can you please give me some pointers on how to check whether WF-BATCH has the needed authorisations and the process can be executed in background.
    Reply me at your convenient time.
    Thanks a lot for your response.
    Regards,
    Udaya

  • What updates are available for Mac OS X 10.5.8 (9L30)?

    What updates are available for Mac OS X 10.5.8 (9L30)?

    Before embarking on a major OS upgrade, it would be wise, advisable and very prudent if you backup your current system to an external connected and Mac formatted Flash drive OR externally connected USB, Thunderbolt or FireWire 800, Mac formatted hard drive. Then, use either OS X Time Machine app to backup your entire system to the external drive OR purchase, install and use a data cloning app, like CarbonCopyCloner or SuperDuper, to make an exact and bootable copy (clone) of your entire Mac's internal hard drive. This step is really needed in case something goes wrong with the install of the new OS or you simply do not like the new OS, you have a very easy way/procedure to return your Mac to its former working state.
    Then, determine if your Mac meets ALL minimum system install requirements.
    Mac OS X v10.6 Snow Leopard system requirements
    Purchased Installer disc here. 
    http://store.apple.com/us/product/MC573Z/A/mac-os-x-106-snow-leopard
    To install Snow Leopard for the first time, you must have a Mac with:
    An Intel processor
    An internal or external DVD drive, or DVD or CD Sharing
    At least 1 GB of RAM (additional RAM is recommended)
    A built-in display or a display connected to an Apple-supplied video card supported by your computer
    At least 5 GB of disk space available, or 7 GB of disk space if you install the developer tools
    Installing and updating OS X 10.6 Snow Leopard to OS X 10.6.8 gives your Mac access to the Mac App Store where you can decide which version of OS X to upgrade to, again, if you desire.
    OS X Lion system requirements
    Purchased emailed download code here.
    http://store.apple.com/us/product/MC573Z/A/mac-os-x-106-snow-leopard
    To use Lion, make sure your computer has the following:
    An Intel Core 2 Duo, Core i3, Core i5, Core i7, or Xeon processor
    Mac OS X v10.6.6 or later to install via the Mac App Store (v10.6.8 recommended)
    7 GB of available disk space
    2 GB of RAM
    To install OS X  10.8 Mountain Lion or OS X 10.10 Yosemite.you need one of these Macs:
    OS X 10.8 Mountain Lion purchased emailed download code here.
    http://store.apple.com/us/product/D6377Z/A/os-x-mountain-lion
    iMac (Mid-2007 or later)
    MacBook (13-inch Aluminum, Late 2008), (13-inch, Early 2009 or later)
    MacBook Pro (13-inch, Mid-2009 or later),
    MacBook Pro (15-inch or 17-inch, Mid/Late 2007 or later)
    MacBook Air (Late 2008 or later)
    Mac mini (Early 2009 or later)
    Mac Pro (Early 2008 or later)
    Xserve (Early 2009)
    Your Mac also needs:
    OS X Mountain Lion, Lion, or Snow Leopard v10.6.8 already installed
    2 GB or more of memory (I strongly advise, at least, 4 GBs of RAM or more)
    8 GB or more of available space.
    Your year and model Mac can take a total of 6 GBs of RAM, max..
    I strongly suggest you install the max. RAM your Mac can take.
    Correct, compatible and reliable Mac RAM can ONLY be purchased from online RAM sources Crucial memory or OWC (macsales.com).
    OWC is the only source for the  6 GB RAM kit.
    Next,
    If you run any older Mac software from the earlier PowerPC Macs, then none of this software will work with the newer OS X versions (10.7 and onward). OS X Snow Leopard had a magical and invisible PowerPC emulation application, called Rosetta, that worked seamlessly in the background that still allowed older PowerPC coded software to still operate in a Intel CPU Mac.
    The use of Rosetta ended with OS X Snow Leopard as the Rosetta application was licensed to Apple, from a software company called Transitive, which got bought out, I believe, by IBM and Appe  could no longer secure their rights to continue to use Rosetta in later versions of OS X.
    So, you would need to check to see if you have software on your Mac that maybe older than, say, 2006 or older.
    Also, check for app compatibilty  here.
    http://roaringapps.com/
    If you have any commercial antivirus installed and/or hard drive cleaning apps installed on your Mac, like MacKeeper, CleanMyMac, TuneUpMyMac, MacCleanse, etc. now would be a good time to completely uninstall this apps by doing a Google search to learn how to properly uninstall these types of apps.
    These types of apps will only cause your Mac issues later after the install of the new OS X version and you will have to completely uninstall these types of apps later.
    Once you have determined all of this, you should be able to find the latest versions of OS X by clicking on the Mac App Store icon in the OS X Dock and then login to the Mac App Store using your Apple ID and password and using the appropriate download codes need
    You can then begin the download and installation process of installing your desired versions of OS X  from the Mac App Store.

  • My auto updates are not working. I cannot find where to download Camera Raw 8.1 for Photoshop CS6.

    My auto updates are not working! I cannot find where to download Camera Raw 8.1 for Photoshop CS6 (Windows 8 64 bit). My Camera Raw is now at 7.1. I had the online Adobe folks tell me to just download all updates manually. That's great, yet I cannot find camera raw 8.1 to download...
    Please help.
    Thanks, Janet

    there's a direct download link on this page: https://blogs.adobe.com/lightroomjournal/2013/06/camera-raw-8-1-and-dng-converter-8-1-now- available.html

  • Update should not happen in the name of WF-BATCH

    Hi All,
    I have a requirement to change the WF-BATCH to the other user id.
    The task completion or update should not happen in the name of WF-BATCH, instead it should happen with the name of the other user id.
    Please can anybody suggest on this..
    Thanks and Best Regards,
    Sushmitha

    Hello Sushmitha,
    Like I said, it is only working if a previous step was a dialog step for the same user.
    Then when all steps have advance with dialog it will automatically execute the "background" step (which is now dialog).
    If the "background" step is the first to be executed then this scenario does not work.
    It will only work if the agent has a previous work item AND is the one you want as the changed_by user.
    A work around would be to either
    a) check what the method does. If it executes a FM and if that FM has a parameter for changed by you can create a new method where you pass the changed_by user
    b) check if a bapi/fm exists which allows you to change the user
    c) create a program to execute the same logic as the method. Now you must create a new method where you can schedule this program as a background job with another user as the person who executes it.
    Kind regards, Rob Dielemans

  • I just purchased Lightroom 5 back on 15th of February, and v6 is now available. Do I understand correctly that I have to buy the new version for $149.00? Free updates are not available/included with the purchase for some time after the purchase?

    I just purchased Lightroom 5 back on 15th of February, and v6 is now available. Do I understand correctly that I have to buy the new version for $149.00? Free updates are not available/included with the purchase for some time after the purchase?

    Do I understand correctly that I have to buy the new version for $149.00?
    You can upgrade for $79.
    Products

  • I have an iMac OS X Version 10.5.8 but I also have a MacBookPro 10.7.5 version, why software updates are not the same? For example, when I want to know how much memory can not store in the same way in either computer.

    I have an iMac OS X Version 10.5.8 but I also have a MacBookPro 10.7.5 version, why software updates are not the same? For example, the way to see how much memory I have in my iMac is diferent than MacBookPro. And where I can see the memory of the disc I've got in my iMac? Than you very much.

    If you want everything the same on both computers you need to be running the same OS X version. You can't because your iMac is a PPC machine, not Intel.
    But to see information about your hard drive is the same for both. Simply select the drive icon on the Desktop. Press COMMAND-I to open the Get Info window. Disk information is in the upper panel.

  • Windows update are not install. error Code is 8024200D

    windows 8 update are not install...
    error Code 8024200D..
    please help some body help me for this problem.

     Try here. http://windows.microsoft.com/en-us/windows7/windows-update-error-8024200d REO

  • HT3669 This software update keeps popping up almost everyday in my iMac 27 although I keep updating. Looks like the either the update is not happening on my machine or some other problem. Anyone else know of this?

    This software update keeps popping up almost everyday in my iMac 27 although I keep updating. Looks like the either the update is not happening on my machine or some other problem. Anyone else know of this? Everytime I check for updates (I have the setting to manual check), an alert pops up in Apple store with the phrase "Lexmark Printer Software Update 2.11" available for download.
    Is there a way I can turn off this notification for Printer updates until it is resolved? It is pretty annoying.
    Thanks

    Not sure this will help yet, having just noticed it myself, but you can now get the Lexmark driver 3.0 for download here:  http://support.apple.com/kb/DL1397
    I'm going to give that a try to see if I stop getting the constant reminder for 2.11.

  • My ipod touch apps updates are not installing

    My ipod touch apps updates are not installing, does anyone have a solution to this problem?

    Are they waiting?
    Fix iOS Apps Stuck on “Waiting…” During Download & Install

  • My app updates are not completing...what can I do?

    My app updates are not completing,
    what do I do?

    One option is to update them in iTunes, then sync your device to transfer the updated apps.

  • App store updates are not showing

    App store updates are not showing since yesterday

    Agreed. Since installing iOS 7 I seem to have to open the App Store before available updates show. I currently have background app refreshes switched "on" but no apps actually selected from the list.

  • While downloading app update on ipad lost internet connection and now the updates are not updating. How do I fix this?

    While downloading a common application update, I lost my internet connection and now the updates are not updating. How do I fix this?

    Try this:
    •  Log out of your iTunes store account.  Go to Settings > Store > Sign Out Then press the Home button.
    • Then press and hold the Home and Sleep buttons simultaneously and don't release them when it brings up the Turn Off screen; keep holding them until the Apple logo appears.
    • Then restart & see if you can update.
     Cheers, Tom

  • The latest October updates are not showing up in CC 2014

    All of our Adobe programs are still at version 2014.0. In Creative Cloud, everything is "updated".
    Also, InDesign is not able to activate the Folio Builder. The following message comes up:
    "A software update is required to use Digital Publishing Suite. Please go to the Help menu and select Updates to get the required software."
    When I go to the Help menu, the Updates is in grey and not clickable.
    This is the same on our Macs and PCs. We have an Enterprise account with programs on both platforms.
    I have tried to uninstall Creative Cloud and re-installing afterwards.
    So there are 2 major questions here:
    1. How do I get my Adobe programs to get the latest October updates?
    2. How do I get Folio Builder to work in Indesign CC 2014?

    IGM2014 if updates are greyed out then it sounds like updates were disabled by network administrator.  Please involve your I.T. department in the update process.

Maybe you are looking for