Updating Detail Block when Master Block Updates

Using scott/tiger: I have Dept in Master and EMP in detail on Form6i.
The relation is made as dept.deptno=emp.deptno.
When I change the first record of Dept (I changed deptno=10 to deptno=11), I don't get changes of detail block.
I just want to have synchronize result....... confused???... I think I made it... I hope

This is a common problem that we usually face... 
Isn't it? Don't we have any Form level Casscade 
Update (as we have Casscade Delete)? 
Well, I cannot say that's a common job to update primary key. That' even very rare... maybe one or two time I seen this one in the real world, and that was during migration application or such like thing. 
Some days ago, there was same discussion Re: For update cascade 
 
But if you have to update very often your PK, you maybe need to rethink the datamodel. 
 
Nicolas.

Similar Messages

My ipad air blocked when trying to update the new software

my ipad air blocked when trying to update the new software

What do you mean by blocked?
What do you see on your iPad's screen?
~Lyssa

Running OX 10.7.4 and can't open iPhoto 9.0 window keeps popping up saying to update software then when try to update it says software is up to date

Running OX 10.7.4 and can't open iPhoto 9.0 window keeps popping up saying to update software then when try to update it says software is up to date

What version of iPhoto do you have (9.0 is the original version from a couple of years ago - you should be way past that - at least 9.1 - probably 9.2 - maybe 9.3)
Download the 9.1 update and install - http://support.apple.com/kb/DL1322
LN

I keep getting an "Update Failed" message when trying to update my apps using Creative Cloud.

I keep getting an "Update Failed" message when trying to update my apps using Creative Cloud.

[ Mac 10.9.3 / Indesign CC update fail / Premiere update fail / Adobe Media Encoder 7.2.2 update fail ]
Adobe Media Encoder was the problem for me. There's no separate uninstaller for AME. My ID CC and Premiere couldn't be updated (for the AME7.2.2 update as the only change). MCMHMPEGVideoCodec.framework seemed to be the factor.
I uninstalled Premiere (only), after having manually removed MCMHMPEGVideoCodec.framework from inside AME. After boot I installed it again and voilà, both (ID & Premiere) updates went trough fine. The MCMHMPEGVideoCodec.framework was on place inside AME too.

I have an Ipod touch 6 and can't updated apps. When I click update, nothing happen. Any clue?

I have an Ipod touch 6 and can't updated apps. When I click update, nothing happen. Any clue?
Thanks,

There is no iPod Touch 6. The latest generation is iPod Touch 5. Perhaps you mean you have an iPod running iOS 6.1.6. If so, you have a 4th generation iPod which cannot update past 6.1.6. A 5th generation iPod can run iOS 7

I cannot install apps that are upgraded to ios4.. im using iphone 2g 3.1.3 this makes me sad.. why does apple need to updates many apps when we cannot update an iphone 2g anymore..

i cannot install apps that are upgraded to ios4. im using iphone 2g 3.1.3 this makes me sad.. why does apple need to updates many apps when we cannot update an iphone 2g anymore..

I am having the exact same problem with trying to sync my iPad with my computer. To make a long story short, I had to reinstall Windows for my computer and therefore had to reinstall itunes.
I have done back ups in the past for my ipod touch and other ipods with no problems, but unfortunately I have never been able to back up my iPad. During a sync, the iPad would always disconnect from my computer and it would never finish. it would say the connection was lost, but nothing is wrong with the connection.
So now I have over 100 apps and thousands of pictures that I am afraid will be deleted if I run the sync in itunes. I have tried to transfer purchases and it goes through the list of apps, but nothing is ever transferred.
Any help would be appreciated. I am not interested in jailbreaking my iPad to solve this problem. There should be a fix for this and I want to upgrade to ios 4.3 as the original poster. Please help

UPDATE DETAILS IN BP MASTER DATA

Dear All,
Recently we had updated PATCH LEVEL 36.After updated patch 36.In
Business Partner Master Data any detail updating in master it shows the
error "2039 Another user-modify table [Message 7001-13]"
Any detail such as updating e-mail id from contact person table to
general(copy - paste),updating detail in tax information.
Please help me on this error,
Respectfully,
CHETAN
Edited by: Keshava Chandran on Feb 7, 2008 7:38 AM
Edited by: Keshava Chandran on Feb 7, 2008 7:42 AM

Hi Keshava,
Please log a message on the portal for this. This is a program error and and an update needs to be done on the db.
The note 1131133 describes the issue.
In the note there is a select query, export the results to xl and attach it to the message and prepare a recent backup for support.
Support will fix the issue.
Jesper

How update area field when geometry is updated

hi all,
plz can someone help me to find solution or give me a way to solve my problem
i would like to create procedure to recalculate the area of geom and insert it the value in the specified field when the geom is updated.
I try 2 methods but no one works, the error appears if i update the geometry of parcel
------------------------------------------PL/SQL------------------------------------
----------------------------------------Oracle 9i---------------------------------------
CREATE OR REPLACE TRIGGER "GIS"."TRG_PARCEL" BEFORE
INSERT
OR UPDATE ON "PARCEL" FOR EACH ROW DECLARE
BEGIN
IF INSERTING THEN
select SDO_GEOM.sdo_area(geom,0.05) into :new.fld_AREA
from parcel where id_parcel = (select max(id_parcel) from PARCEL) ;
ELSIF UPDATING THEN
-----------------1st case to try ------------------------------
UPDATE PARCEL a
SET fld_AREA = (select SDO_GEOM.sdo_area(a.geom,0.05)
from parcel a where NOT SDO_GEOM.RELATE(a.geom,'EQUAL',val_new,0.005) = 'EQUAL' )
WHERE NOT SDO_GEOM.RELATE(a.geom,'EQUAL',val_new,0.005) = 'EQUAL';
-----------------2nd case to try ------------------------------
SELECT SDO_GEOM.SDO_AREA(c.geom, m.diminfo)
into :new.fld_AREA
FROM PARCEL c, user_sdo_geom_metadata m
WHERE m.table_name = 'PARCEL' AND m.column_name = 'GEOM'
AND old.geom <> :new.geom ;
end if;
end;
thnx for all
Geomaticien TN

Hello,
You may try the following:
CREATE OR REPLACE TRIGGER "GIS"."TRG_PARCEL" BEFORE
INSERT OR UPDATE ON "PARCEL" FOR EACH ROW DECLARE
BEGIN
:NEW.fld_AREA := SDO_GEOM.sdo_area(:NEW.GEOM,0.05);
END;
Thanks,
Ying
Edited by: user704655 on Jul 22, 2009 11:37 AM

Update another list when list is updated

What do you recommend to update another list when the current list is updated.
I have a workflow which updates a Reports list. I also have a favorites list which has 4-5 columns which are in the reports list and I would like to update those values when the reports list is updated. I use a workflow to update the reports list.
Thanks

Hi CoutinhoR,
You could use your existing workflow to update the favourites list (after it has updated the reports list).
Another way, would be creating an event receiver that updates the favourites list whenever an item in the reports list is added, modified or deleted.
It depends on the functionality you need to achieve. If you are just incrementing the value of the columns for a single item in the favourites list (when a report is updated), then using the existing workflow would probably work best.
Regards, Matthew
MCPD | MCITP
My Blog
View
Matthew Yarlett's profile
See my webpart on the TechNet Gallery that allows administrative users to upload, crop and format user profile photos. Check it out here:
Upload and Crop User Profile Photos

Fill in detail block automatically when master block is populated

Hi,
I have a form with 4 blocks. 2 are on a regular canvas, the other 2 are on tab canvases. When the first block is populated all the other blocks should be populated as well. This works for the one block which is not on the tab canvas. The other block are only populated the moment they get focus. (the cursor moves in).
Workaround would be to work with execute_query but in which trigger would I need to place this? (POST_QUERY, ON_FETCH do not work. WHEN_NEW_RECORD_INSTANCE works with plenty of errors)
Best Regards,
Kris

Is this a new form written by you and you know what code it contains ?
If it an existing form written or maintained by other people, you ought to check for code you are unaware of.
Using find and replace pl/sql to search for SET_RELATION_PROPERTY might be worth doing for a start.

Update issues. says cannot connect to net but it is? Access itunes fine but wont connect for update, only occured when i did update to itunes on computer...help!

Installe dnew copy of itunes, now cannot update when propmted after plugging in ipod, says not connected to internet. then trie to go itunes, which was fine. computer is connected to net ....
Microsoft Windows XP Home Edition Service Pack 3 (Build 2600)
System manufacturer System Product Name
iTunes 10.3.1.55
QuickTime 7.6.9
FairPlay 1.11.17
Apple Application Support 1.5.2
iPod Updater Library 10.0d2
CD Driver 2.2.0.1
CD Driver DLL 2.1.1.1
Apple Mobile Device 3.4.1.2
Apple Mobile Device Driver 1.57.0.0
Bonjour 2.0.5.0 (214.3)
Gracenote SDK 1.8.2.457
Gracenote MusicID 1.8.2.89
Gracenote Submit 1.8.2.123
Gracenote DSP 1.8.2.34
iTunes Serial Number 0012AC880C0FDE28
Current user is an administrator.
The current local date and time is 2011-07-06 01:02:01.
iTunes is not running in safe mode.
WebKit accelerated compositing is enabled.
HDCP is not supported.
Core Media is supported.
Video Display Information
NVIDIA GeForce 7025 / NVIDIA nForce 630a
**** External Plug-ins Information ****
No external plug-ins installed.
Genius ID: f3716be92491fd1a33f7e647a889bf41
iPodService 10.3.1.55 is currently running.
iTunesHelper 10.3.1.55 is currently running.
Apple Mobile Device service 3.3.0.0 is currently running.
**** Network Connectivity Tests ****
Network Adapter Information
Adapter Name: {BDA8D3FD-3CCE-4BCF-A357-0A51184CF67C}
Description: NVIDIA nForce Networking Controller - Packet Scheduler Miniport
IP Address: 192.168.1.3
Subnet Mask: 255.255.255.0
Default Gateway: 192.168.1.1
DHCP Enabled: Yes
DHCP Server: 192.168.1.1
Lease Obtained: Wed Jul 06 00:38:07 2011
Lease Expires: Thu Jul 07 00:38:07 2011
DNS Servers: 192.168.1.1
Active Connection: (none)
Connected: No
Online: No
Using Modem: No
Using LAN: No
Using Proxy: No
SSL 3.0 Support: Enabled
TLS 1.0 Support: Enabled
Firewall Information
Windows Firewall is off.
Connection attempt to Apple web site was successful.
Connection attempt to browsing iTunes Store was successful.
Connection attempt to purchasing from iTunes Store was successful.
Connection attempt to iPhone activation server was successful.
Connection attempt to firmware update server was successful.
Connection attempt to Gracenote server was successful.
Last successful iTunes Store access was 2011-07-06 00:56:50.
diagnostic report. no windows firewall, norton security 2011

If you have an iPad 1, the max iOS is 5.1.1. For newer iPads, the current iOS is 6.1.3. The Settings>General>Software Update only appears if you have iOS 5.0 or higher currently installed.
iOS 5: Updating your device to iOS 5 or Later
http://support.apple.com/kb/HT4972
How to install iOS 6
http://www.macworld.com/article/2010061/hands-on-with-ios-6-installation.html
iOS: How to update your iPhone, iPad, or iPod touch
http://support.apple.com/kb/HT4623
If you are currently running an iOS lower than 5.0, connect the iPad to the computer, open iTunes. Then select the iPad under the Devices heading on the left, click on the Summary tab and then click on Check for Update.
Tip - If connected to your computer, you may need to disable your firewall and anitvirus software temporarily. Then download and install the iOS update. Be sure and backup your iPad before the iOS update. After you update an iPad (except iPad 1) to iOS 6.x, the next update can be installed via wifi (i.e., not connected to your computer).
Tip 2 - If you're updating via wifi, place your iPad close to your router to preclude getting a corrupted download.
 Cheers, Tom

How to Get Contribute CS4 to Update Available Styles when CSS is Updated

I am using a style sheet on my website. I recently updated the style sheet, adding a new style, in Dreamweaver. When I go into Contribute, the style is not showing up.
How can I force Contribute to get the updated data from the latest version of the CSS?
I have about 8 people using Contribute to edit a site and I desperately need them to be able to see the new styles.
Thank you in advance.
Mary Beth

Hi,
The CSS you are defining are CSS classes right, not the ID? That is, in your CSS file, you are defining the new styles using the '.' symbol. If so, then can you ask your users to refresh the web page they want to edit (browse to the web page, right click to bring up the context menu and click Refresh menu item).
Now, they can edit the web page, and the new styles would be displayed in the Styles menu. If that did not resolve the issue, can you ask them to recreate the connection to the website (remove the website connection and creating it again), or, quit and launch Contribute and click Connect button to connect to the website.
If the new style is defined using '#' symbol, I don't think Contribute will display these styles.
Hope this helps.

How do I create a template that will update all pages when it is updated?

Hi everyone, I am a complete InDesign newbie, as this is my first project with it. I was wondering if there is a way to create a generic template in InDesign that, when updated, would also update all the pages made from it. The behavior I am looking for is similar to the way Dreamweaver does templates... when you create a new page, you can tell it to make the page from the already created template. That template has been pre-configured with editable regions. Anything outside the editable regions cannot be modified unless editing the template directly.
Does this functionality exist in InDesign? I am running CS5.
Thanks!

drmuzik wrote:
Hi everyone, I am a complete InDesign newbie, as this is my first project with it. I was wondering if there is a way to create a generic template in InDesign that, when updated, would also update all the pages made from it. The behavior I am looking for is similar to the way Dreamweaver does templates... when you create a new page, you can tell it to make the page from the already created template. That template has been pre-configured with editable regions. Anything outside the editable regions cannot be modified unless editing the template directly.
Does this functionality exist in InDesign? I am running CS5.
Thanks!
Take a look at this article:
http://indesignsecrets.com/free-layout-zones-add-on-is-incredible-productivity-tool.php
Also, this commercial tool might be useful:
http://www.rorohiko.com/wordpress/indesign-downloads/storytweaker/#Downloads
HTH
Regards,
Peter
Peter Gold
KnowHow ProServices

Photoshop CS5 doesn't find update 12.04 when I click updates.

I currently have Photoshop CS5 12.03 loaded and when I click Help>Updates it says my applications are currently up to date. What's up with that. I know that there is a 12.04 because I just loaded for a friend on his computer.
I also have a second problem with the 64 bit version of Photroshop CS5. It won't use the pen pressure with my Wacom tablet. When you go to the dialog box for Shape Dynamics it shows a little triangle with the exclamation point inside and it says you have to have a pressure sensitive tablet to use pen pressure. I have the lastest driver from Wacom and it also works just fine in the 32 bit version of Photoshop.
Any help would be greatly appreciated!

John T Smith wrote:
Go to Photoshop Updates http://www.adobe.com/support/downloads/product.jsp?product=39&platform =Windows and do it manually
I had the same problem on Win 7 64 bit: no updates were found and my system was reported as up to date. I started to update manually and received a message that it was preferable to update directly from Photoshop using the application manager. I then installed the latest version of this program and then Photoshop was able to find the Ver 5.0.4 update and install it.

Warning in log after updating SQL server when installing cumulative updates

Every time I install cumulative updates for Lync 2013, when I run the command to update the SQL database which is
Install-CsDatabase -ConfiguredDatabases -SqlServerFqdn SQLLYNPROD1.domain.local -Verbose
I get the two warnings below in the log. The update works OK and I don't have any issues. I get a warning just for this database for the database itself and the log path. Can't find anything on it searching. Any idea where to start looking
Warning: The
database rtcxds being updated has data file path at
\\SQLLYNPROD1.domain.local\E$\SQLData\rtcxds.mdf and supplied data file path is
\\SQLLYNPROD1.domain.local\E$\CsData\BackendStore\(default)\DbPath\rtcxds.mdf.
Supplied path will be ignored.
Warning: The
database rtcxds being updated has log file path at
\\SQLLYNPROD1.domain.local\F$\SQLLog\rtcxds.ldf and supplied data file path is
\\SQLLYNPROD1.domain.local\E$\CsData\BackendStore\(default)\LogPath\rtcxds.ldf.
Supplied path will be ignored.

There is only one CsData folder on the Lync server but the install program is complaining about the RTCXDS database which is on our enterprise backend SQL server. The path above is correct.
\\SQLLYNPROD1.domain.local\E$\SQLData\rtcxds.mdf for data and
\\SQLLYNPROD1.domain.local\F$\SQLLog\rtcxds.ldf for logs
but a bogus path of
\\SQLLYNPROD1.domain.local\E$\CsData\BackendStore\(default)\DbPath\rtcxds.mdf for data and
\\SQLLYNPROD1.domain.local\E$\CsData\BackendStore\(default)\LogPath\rtcxds.ldf for logs is being supplied from somewhere to the install program.
Fortunately, the install program knows enough to ignore the supplied path and take what it is given from SQL. Just trying to figure out where this supplied path is coming from. It could be anywhere. As I said, needle in a haystack.

Updating Detail Block when Master Block Updates

Similar Messages

Maybe you are looking for