Updating ipod error message

when i connect my ipod 30gb to my laptop it opens itunes and tells me there is an upate avalible for my ipod. when i try to update it comes up with error 1417. I have tried to restore my ipod to factory settings at it fails with error message 1428. Any help would be appriciated.
thanks

Any help here?
http://discussions.apple.com/thread.jspa?messageID=3172375&#3172375
If that doesn't work, could you also take some time to pass some information for the Apple Engineers? Please copy and paste these questions into an email, make the subject of the email "iPod error report", add your answers, and send the email to Roy at Apple.
1. What error code are you seeing?
2. When are you seeing it (restoring or updating your iPod)?
3. Which iPod do you have?
4. What version of Windows do you have?
5. What Windows service pack do you have installed?

Similar Messages

PROBLEM UPDATING IPOD ERROR MESSAGE (69)

I CANNOT UPDATE MY IPOD USING ITUNES, IT STARTS BUT FEW MINUTES LATER YOU HEAR THE HARD DRIVE SEARCHING AND THEN TTHE MESSAGE "CAN NOT WRITE ON DISK "ipod name" A NOT RECONICE ERROR ACCURRED (69) I HAVE RESET THE IPOD, UPDATE DE ITUNES, UPDATE THE IPOD. WHAT ELSE CAN I DO?

Try restoring it. If problems persist, then you may have a defective iPod.
Good luck.
Forum Tip: It is generally considered inappropriate behavior to type all in uppercase letters in Internet discussions, as text that is typed all in uppercase is by convention considered to be shouting. Uppercase is also more difficult to read, so please use all uppercase sparingly and only when you really mean to shout, which we hope you won’t need to do here .

Cannot download updates without error message

Whenever I try to download my computer's updates, an error message pops up saying that I do not have sufficient admin privileges to download them. This is troubling because my account is the only account on my computer, and is clearly registered as an "admin". How can I fix this so that I can download my software updates?

Try repairing your permissions. If that does not work, try booting from your install disc and reset the admin password.
Dave M.
MacOSG Founder/Ambassador  An Apple User Group  iTunes: MacOSG Podcast
Macsimum News Associate Editor  Creator of 'Mac611 - Mobile Mac Support'

Sad faced Ipod error message (click wheel ipod classic)

I've had the sad faced ipod error message with my ipod before and forcing into disk mode has always solved it before.
It's not showing up in itunes or my computer when I connect it to my laptop.
I have tried forcing it into disk mode time and time again and about one time out 40 it will go into disk mode. The problem comes when I then plug into the computer to restore it. It will start telling me do not disconnect then give me the error message of a battery with little power left.
It is definatly charged because I have been trying to get it into disk mode all day and on the occasions I've managed to get there it will tell me i have 3quarters or so battery remaining. However when I am plugging it into the docking station it isnt coming up to say its charging it just goes over and over with the apple logo then the sad faced ipod message.
I have tried 4 different usb cables and 2 different chargers.
Its driving me mad and any help would be greatly appreciated. I dont want my ipod to be dead.

I have been using that page, I was hoping that as id managed to get it into disk mode a few times that it might not be a harware issue.
Its about 2 years out of warrenty so a service will probably cost the same as a new one

My iphone 5c says connect to itunes. It won't update/restore; error message (27) comes up. I also haven't backed the phone up since last year. Help

My iphone 5c says connect to itunes. It won't update/restore; error message (27) comes up. I also haven't backed the phone up since last year. HELP.

Hi there owain11,
It looks like that particular error may be realted to a hardware issue. Take a look at the article below for more information.
Resolve iOS update and restore errors
Check for hardware issues
Related errors: 1, 3, 10, 11, 12, 13, 14, 16, 20, 21, 23, 26, 27, 28, 29, 34, 35, 36, 37, 40, 1000, 1002, 1004, 1011, 1012, 1014, 1667, or 1669.
These errors mean that your device or computer may have a hardware issue that's preventing the update or restore from completing.
Check that your security software and settings aren't preventing your device from communicating with the Apple update server.
Then try to restore your iOS device two more times while connected with a cable, computer, and network you know are good.
Confirm that your security software and settings are allowing communication between your device and update servers.
If you still see the error message when you update or restore, contact Apple support.
-Griff W.

I'm unable to install the latest Photoshop CC 2014 update. Error message U44M1P34. Can anyone help please?

I'm unable to install the latest Photoshop CC 2014 update. Error message U44M1P34. Can anyone help please?

U44.. update error http://forums.adobe.com/thread/1289956 may help
-more U44.. discussion http://forums.adobe.com/thread/1275963
-http://helpx.adobe.com/creative-suite/kb/error-u44m1p7-installing-updates-ccm.html
-http://helpx.adobe.com/creative-suite/kb/error-u44m1i210-installing-updates-ccm.html

Macbook pro - iPhoto keep prompting to update after Yosemite update. Error message when trying to update -This update is not available for this Apple ID either because it was bought by a different user or the item was cancelled

macbook pro - iPhoto keep prompting to update after Yosemite update. Error message when trying to update -This update is not available for this Apple ID either because it was bought by a different user or the item was refunded or cancelled.

I only have 1 apple ID and the same was used to set up this early 2011 macbook pro and iPhoto app. I don't want to loose out on any photos. I tried logging out of app store and back in but no luck. PLEEAASEE HELPP!!!
This problem has been reported by quite a few forum members, who skipped the update to iPhoto 9.5.1 while running Mavericks. In that case try to purchase iPhoto again instead of updating.
After making your backup try the following:
Uninstall iPhoto by deleting it from the applications folder, but do not empty the Trash.
Launch the App Store, click the "Store" menu, and sign in with your AppleID.
Open the main page of the App Store and search for iPhoto.
If iPhoto is listed as "Free", click the "Free" button to buy it with your current AppleID.
If it is not showing as free, there is no help but contacting the App Store Support, as Niel pointed out: http://www.apple.com/support/mac/app-store/contact/

I can't update itunes, error message comes up, can't update the older version of bonjour contact your technical support

I can't update itunes, error message comes up, can't update the older version of bonjour contact your technical support

(1) Download the Windows Installer CleanUp utility installer file (msicuu2.exe) from the following Major Geeks page (use one of the links under the "DOWNLOAD LOCATIONS" thingy on the Major Geeks page):
http://majorgeeks.com/download.php?det=4459
(2) Doubleclick the msicuu2.exe file and follow the prompts to install the Windows Installer CleanUp utility. (If you're on a Windows Vista or Windows 7 system and you get a Code 800A0046 error message when doubleclicking the msicuu2.exe file, try instead right-clicking on the msicuu2.exe file and selecting "Run as administrator".)
(3) In your Start menu click All Programs and then click Windows Install Clean Up. The Windows Installer CleanUp utility window appears, listing software that is currently installed on your computer.
(4) In the list of programs that appears in CleanUp, select any Bonjour entries and click "Remove", as per the following screenshot:
(5) Quit out of CleanUp, restart the PC and try another iTunes install. Does it go through properly this time?

Updated iTunes to 12.0.1 on XP after updated recieved error message "The procedure entry point ADAdPolicyEngine_DidEnterStation could not be located in the dynamic link dll" "itune not installed correctly error 7 (windows 127). reinstalled same error

updated iTunes to 12.0.1 on XP after updated recieved error message "The procedure entry point ADAdPolicyEngine_DidEnterStation could not be located in the dynamic link dll" "itune not installed correctly error 7 (windows 127). reinstalled same error. Tried suggested steps
Remove all of these items in the following order:
iTunes
Apple Software Update
Apple Mobile Device Support (if this won't uninstall press on)
Bonjour
Apple Application Support
Still getting same error message. Can anyone help me

For general advice see Troubleshooting issues with iTunes for Windows updates.
The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down page in case one of them applies.
Your library should be unaffected by these steps but there is backup and recovery advice elsewhere in the user tip.
tt2

Software update shows error message iMac, Mac OS X (10.6.8)

Why does software update show error message, reads check network connection when the network is connected? iMac, Mac OS X (10.6.8)

solved

Adobe Flash Player Update Service Error Message

I am using Windows Vista 7.
Every hour I receive an Adobe Flash Player 11.6r602 Update Service Error Message.
How do I get rid of it?

This will most likely be fixed in the next Flash Player update, so check regularly for a new version at http://forums.adobe.com/community/flashplayer/announcements
[topic moved to Flash Player forum]

Update Vault error message

Aperture is not letting me update my vaults. I am receiving update vault error messages when trying to back up to Vaults. I have three backup Vaults on external firewire drives, formatted Mac HFS+ (not MS-DOS) and not partitioned. My Aperture library is also on a dedicated external drive. I get the same message for all three vaults, so this seems to be an Aperture problem, not a disk problem. The error messages refer to NEF (raw) image files that do not exist in my Library (or anywhere else, for that matter). Message reads:
update vault error:
The following error occured:
Couldn't create/Volumes/LaCie/ApertureV2.apvault/Library/....
Any insights would be appreciated.

James Bouret's problem is fixed -- or maybe not.
From my blog: +We traced the problem to "something bad" about the folder or its contents that was being reported. By opening the library and the vault with control-click Show Package Contents and navigating down, it was possible to trash the folder. Not only did the vault update complete once that was done, but it worked many, many times faster than before. The bad news is that I think this is due to a bad spot on the disk, indicating a drive that is on its way out. If you have vault problems: back up carefully and consider that you may have a bad disk.+
A bad spot on the disk may also be the reason that Johnny Cappuccino could fix his problem by modifying the image. That will have rewritten the sidecar files, a process that usually involves creating a new temporary file and then atomically deleting the old file and renaming the new one. So the new file is shiny and good and the bad spot is ready for use by another hapless program.

Trying to install update and error message says older version of itunes cannot be removed

trying to install update and error message says older version cannot be removed

(1) Download the Windows Installer CleanUp utility installer file (msicuu2.exe) from the following Major Geeks page (use one of the links under the "DOWNLOAD LOCATIONS" thingy on the Major Geeks page):
http://majorgeeks.com/download.php?det=4459
(2) Doubleclick the msicuu2.exe file and follow the prompts to install the Windows Installer CleanUp utility. (If you're on a Windows Vista or Windows 7 system and you get a Code 800A0046 error message when doubleclicking the msicuu2.exe file, try instead right-clicking on the msicuu2.exe file and selecting "Run as administrator".)
(3) In your Start menu click All Programs and then click Windows Install Clean Up. The Windows Installer CleanUp utility window appears, listing software that is currently installed on your computer.
(4) In the list of programs that appears in CleanUp, select any iTunes entries and click "Remove", as per the following screenshot:
(5) Quit out of CleanUp, restart the PC and try another iTunes install. Does it go through properly this time?

[svn:bz-trunk] 8257: Updated expected error message to match current error.

Revision: 8257
Author:   [email protected]
Date:     2009-06-25 13:50:44 -0700 (Thu, 25 Jun 2009)
Log Message:
Updated expected error message to match current error.
Modified Paths:
    blazeds/trunk/qa/apps/qa-regress/testsuites/config/tests/messagingService/validation/wron gTypeValidatorTest/error.txt

This is the error:
I also tried restarting the computer, no help. Is this one of those cases where the preference file needs to be deleted and rebuilt?

When ipod is trying to update an error message appears

i put too many songs on my itunes so when i tried updating my ipod it wouldnt fit, so the computer automatically made a playlist that will always be updated from. but i deleted that playlist and just deleted some songs in my library so it would fit. also i went to ipod options and changed it to update all songs and playlists. when i tried updating the ipod this time, it freezes for a while and then the error message says "the ipod "kyle's ipod" cannot be updated. the disk cannot be read from or written to." and i dont know what to do! please help!!
ipod mini 4GB Windows XP

hi kyle!
"the ipod "kyle's ipod" cannot be updated. the disk cannot be read from or written to."
here's a good place to start with that message:
"Disk cannot be read from or written to" when syncing iPod or "Firmware update failure" error when updating or restoring iPod
love, b

Updating ipod error message

Similar Messages

Maybe you are looking for