Upgaded ios on 3gs to ios 6.0. Manual connect to wifi and works. Will not reconnect after the phone shuts off unless I do it manually. The old ios would. Suggestions??
Upgraded ios on iphone 3GS to ios 6.0. I manually connected to the wifi and it works. After the phone shuts off, it will not connect back to wifi when it turns on unless I reconnect manually again. I have the "Ask to join Networks" button turned on. Frustrating and could get expensive if I forget and start using ATT data. Suggestions??
Settings, Reset, Reset Network Settings. Then attempt to connect again. Passwords will be deleted when you do this, so it will ask for the password again. After that, see if it will connect.
Similar Messages
-
.
I couldn't find the edit button on my original post so I am posting an update here.
I have gone through more apps and have had good luck on all but one more. And it's not that the app doesn't work, I am talking about the Yahoo Weather app, It works fine, but when you swipe between cities the screen lags a bit and it sometimes doesn't move between pages the way it should. On iOS 7.1.2 it was smooth as butter but on iOS 8.0, not so much. I will post a note in the app store to let them know. I really like the Yahoo app better than the new stock app.
I have been going through my games and they all work fine. Angry Birds (Original and Stella), Canabalt, Minecraft, Bejeweled 2, Silly Walks, PopWords, Doodle Jump, Deep Green all seem to work just fine.
Starbucks app works as it should.
I will stop back again next week after I have had the weekend to play with it in detail and post my thoughts again. -
IOS 7 will not activate after restore - iPad
I have just updated my iPad mini to iOS 7 Via iTunes. I did a full restore, it got to the start screen, Asked for the language and location, I then connected it to both Wi-FI and iTunes and it will not activate after multiple attempts!
Activation servers are being stressed just as hard as the download servers. Best to just wait it out and try again later.
-
I am facing wifi and mobile 2G signal issue after upgrading to IOS 6 from IOS 5 in IPhone 3GS. The mobile carrier signal as well as WIFI suddenly drops zero and are then restored automatically. Sometimes i cannot conenct to WIFI even standing infront of WIFI router. Please help, restoring setting even didn't helped.
Update: my phone's connecting to the WiFi again. I don't know what did the trick. I did nothing since reinstalling the software. It hadn't worked then, it is now. I tried connecting to my dad's phone's hotspot( he uses a Moto G), and it worked. I then tried connecting to the WiFi at a friend's house, and when I came back home, my phone was able to connect to my WiFi! Is it of any significance that my friend's router doesn't require a password? My issue has been resolved( for now; I hope I'm not counting my chickens before they've hatched). For anyone facing a similar issue, I suggest you try everything I did:
1. Turn your router off for a minimum of 30 seconds, turn it back on and try connecting.
2. Click on the WiFi network you are connected to, scroll to the bottom, tap "Renew Lease".
3. Do a soft and hard reset.
4. Reset network settings.
5. Back your data up, erase all content from settings menu, restore from backup.
6. Reinstall your software( put it in recovery mode).
I am not sure which of the above worked for me. Make sure you try everything. If none of the above works, take it to a genius bar or an authorised service provider. Good luck! :) -
i have the iphone 3gs and ive dropped it a few times. when i press the home and lock button, it will not turn on, but when i plug it in, it says in big font IOS 6 and when i slide it open it says connect to itunes or emergency call. it wont turn on when i plug it in to my pc. tips?
roush12345 wrote:
i ... it wont turn on when i plug it in to my pc.
Place the Device into Recovery mode... All data / Content will be Erased.
http://support.apple.com/kb/HT1808
Note on Recovery Mode.
You may need to try this More than Once...
Be sure to Follow ALL the Steps...
Once you have Recovered your Device...
Re-Sync your Content or Restore from the most recent Backup...
Restore from Backup
http://support.apple.com/kb/ht1766
But... if the Device has been Modified... this will Not necessarily work -
i purchased i phone 3GS from San francisco thro my brother, when i brought to oman, i want to update ios 5 to ios 6 for that from itunes to start update , finally failed and i could not able to configure in oman wifi network, i dont have backup..help me..
Has your phone ever been hacked or jailbroken. This error message is what usually shows up for that. Are you using a supported carrier for the iPhone, or did someone hack the phone to unlock it to be used on another carrier. If that is the case, then there is no help you can get here as discussing hacked/jailbroken devices is not allowed.
-
I have an Iphone 3GS 16gb which was working on ios 4.1.1
The phone isn't factory unlocked. I upgraded it to IOS 6.0.1 and after that i am not able
to search for networks. it shows no services.Ok thank you so much! Although I ended up taking the sim card out of my new Iphone and reinserting it into my old one it finally let me restore it! So thanks once again this really helped!
-
I have a iphone 3gs and it will not update to the IOS 5.1.1
I have a iphone 3gs and it will not update. I have tried going to settings and it doesnt even show up the software button to check and see if I can update. I have also tried on itunes to see if i will update and all it says is "the version iphone software (4.2.1) is the current version"
any ideas to help?Post the model number. You probably have an iPhone 3G.
-
good evening i have an problem with my iphone 4 the wif and network cant on now if i tray is showing iTunes i tray to reload the ios is showing an error -1 can you help me
No problem, glad to help!
Update: my PC USB hub was connected to a USB 3 port, I connected the 30 pin cable directly to my PC, And the restore worked just fine. Restored phone from iCloud backup and seems to be working fine. -
I'm currently running ios 5 beta on my iphone 4 and when i woke up this morning my phone had decided to automatically update the software OTA. After connecting to wifi and switching on location i proceeded to follow the instructions 'slide to setup'. I was informed that it may take 3 minutes to activate phone but was then presented with the screen 'Could not Activate iphone', this is because the activation server is unavailable. Can anybody shed some light on this for me?
Many thanksCan anybody shed some light on this for me?
Not here. iOS5 beta is only available to registered developers, and discussing it publicly outside of the private developer forums is a violation of the non-disclosure agreement you signed to access the beta. -
I have an Iphone 4 just recently updated to IOS7 and was successful used all this past week. At aroun midnight my phone aske to update IOS software a fix to bugs on the sofware. Since then my phone has been locked up just showing an apple on the display and it will not marry up to itunes????
All of Apple's servers...including the activation servers are pretty much flooded with users like you doing the same thing. Be patient and keep at it...or wait till the traffic to them has decreased and then try again. Coming back to it tomorrow (if that's a viable option for you) will likely increase your chances of not having issues.
-
I updated my iPhone 5S to iOS 7.0.2 and iBooks will not load anything from the Store- I cannot search or even view my purchases.
Also Safari keeps crashing. I have shut down the phone and restarted it twice and that hasn't helped. Any ideas?Libellen wrote:
I updated my Iphone 5s with IOS 7.0.5
The Update would not have Installed if it was not suitable for your Device.
Libellen wrote:
... anyhowe the phone is now totaly "dead" and will not turn on
First try a Reset ( No Data will be Lost )
Press and hold the Sleep/Wake button and the Home button at the same time for at least Ten seconds... (But can take Longer)... until the Apple logo appears. Release the Buttons
If no joy... Try a Restore...
1: Connect the device to Your computer and open iTunes.
2: If the device appears in iTunes, select and click Restore on the Summary pane.
Restoring > http://support.apple.com/kb/HT1414
3: If the device doesn't appear in iTunes, try using the Steps in this article to force the device into Recovery Mode.
Note on Recovery Mode.
You may need to try this More than Once... Be sure to Follow ALL the Steps...
Once you have Recovered your Device...
Re-Sync your Content or Restore from the most Recent Backup...
Restore from Backup > http://support.apple.com/kb/ht1766 -
I recently got a new iphone 4 w/iOs 7. I set up th eicloud, etc. and got my contacts and appointments from outlook. All was fine. Now it will not snyc/update my phone from outlook. I get "Your setup couldn't be started because of an unexpected error."
Hello JinxUK,
Thank you for the details of the issue you are experiencing with the iCloud Control Panel. I found an article referencing the error message you are getting:
“Your setup couldn't be started because of an unexpected error.”
Apple is investigating this issue. This article will be updated as more information becomes available.
iCloud: iCloud Control Panel setup cannot be started
http://support.apple.com/kb/TS5178
I recommend saving that link so that you can check back for a resolution when it becomes available.
Thank you for using Apple Support Communities.
Best,
Sheila M. -
After updating to iOS 6, I can no longer connect to my schools wireless network. It uses manual http proxy. Now however a blank pop up comes up and it will not connect you. Thanks
Turn off your firewall and antivirus software.
-
my iphone 4 i bought was jailbroken to ios 6.0.1 redsn0w but i tried to restore the iphone and now it keeps saying connect to itunes but when i connect and try to restore an "unknown error" occurs and it will not boot up whatsoever. please help!
If you want to solve your problems, unjailbreak. And don't do it again, because jailbreaking causes problems as you read about in that article. You can try Recovery Mode: http://support.apple.com/kb/HT1808
Maybe you are looking for
-
IMac G5 (without isight) acting weird after installing updates.
Hello all, My iMac G5 has started acting very strange the last week or so. I had not used the computer in a while (I have a laptop as well) but started using it again about a month ago. Since the computer had been off for so long I went ahead and dow
-
Inserting Object link as reference object in Maint Order/Notification
Dear all, I've mapped pipe line using obejct link,now when i create Maint Order or Notification system displays below mentioned message, Select a link object as reference object Message no. IH101 Diagnosis You are trying to create an order or a notif
-
Is SAP Certication only allowed for ppl taken training from selected center
Hi Experts Just wanted to know that : If someone who has taken SAP training from any local institute is elligible for SAP certification? Is there any prerequisite for Certification , which states that u should be trained from some specific institues.
-
System recovery error in satellite A300
Hi. Sorry for the bad english. I have a problem. In my satellite A300 Vista comes a blue screen error. I followed the instructions in the manual to make system recovery. At the boot press f8 and select "Repair your computer". Seems to start properly
-
Command /usr/bin/codesign failed with exit code 1
Hi I am getting this type of error when i am trying to run application on device . I create certificate and provisioning properly, but i am getting this error every time. Please help me out thanks in advance.