Upgradation from CRM 4.0 to CRM 7.0 with respect to sales order.
Hi All,
Can you please tell me what are all the 'EEWB enchacement changes' to be carried out during upgrade from CRM 4.0 to CRM 7.0 with respect to sales order..
Thanks & Regards
Prasanna
hi
check out the upgradation Note available in the Master Lists for upgradation.
Similar Messages
-
Please can someone tell me why I cannot reinstall my upgrade from lightroom 4 (lightroom 3 installed off disc with serial no) my hard drive crashed, and I am trying to get lightroom 3; 4 and 5 back on so that I can link my catalogues and continue work. I cannot install lightroom 5 until the upgrades from 4 are on the pc, (lightroom 3 installed off disc but 4 is a copy of the upgrade download I got when I bought it) These serial no's are legit and are registered under my account with adobe, but it still gives me the Big Red Cross when I put my serial no in! Please can someone help. I am at a loss. Thx Heidi
Please can someone tell me why I cannot reinstall my upgrade from lightroom 4 (lightroom 3 installed off disc with serial no) my hard drive crashed, and I am trying to get lightroom 3; 4 and 5 back on so that I can link my catalogues and continue work. I cannot install lightroom 5 until the upgrades from 4 are on the pc, (lightroom 3 installed off disc but 4 is a copy of the upgrade download I got when I bought it) These serial no's are legit and are registered under my account with adobe, but it still gives me the Big Red Cross when I put my serial no in! Please can someone help. I am at a loss. Thx Heidi
-
Please can someone tell me why I cannot reinstall my upgrade from lightroom 4 (lightroom 3 installed off disc with serial no) my hard drive crashed, and I am trying to get lightroom 3; 4 and 5 back on so that I can link my catalogues and continue work. I cannot install lightroom 5 until the upgrades from 4 are on the pc, (lightroom 3 installed off disc but 4 is a copy of the upgrade download I got when I bought it) These serial no's are legit and are registered under my account with adobe, but it still gives me the Big Red Cross when I put my serial no in! Please can someone help. I am at a loss. Thx Heidi
BrightBluephotograph wrote:
I cannot install lightroom 5 until the upgrades from 4 are on the pc,
You don't need to have Lightroom 3 and 4 installed on your computer to install Lightroom 5. Just install Lightroom 5 and input your serial number for 3 in the previous version box and your serial number for 5 in the upgrade box. -
I want to but Photoshop CS6 as an upgrade from CS5. Don't want to fool with CC.
I want to but Photoshop CS6 as an upgrade from CS5. Don't want to fool with CC
Photoshop CS6 will supposedly still be available for some time at least from Adobe.
Edit: What a regrettable developement at Adobe that CC business is … -
Upgrade from CRM2007 (6.0) to CRM 7.0
Hi community,
we are working on an upgrade from 6.0 to 7.0.
After checking modifications with TA SPAU, I'm checking our adaption in the WebUI.
Extending a WD Component with the workbench means, that a Z class is generated which inherits from the SAP standard class, then you can redefine the methods you need to adapt! Mostly we copied standard method and added our coding!
This means after upgrade I have to check all these redefined methods, because the overtaken SAP standard coding could probaby have changed due upgrade.
When I check table BSPWD_CMP_C_REPL I see that we habe about 90 classes which inherit from a SAP standard class.
So I think I have to check each reimplemtated method if the adapted coding is now different to standard method implementation?
Am I right with my suggestions?
I didn't start yet, because I'm still in hope that there's a transaction / programm supporting this job?
regards
MarkusHi Markus,
Things that are available in 7.0 may have been made available in 6.0 through custom enhancements. You should therefore validate each and every implementation to see if the requested functionality is still necessary. This makes sure you're not poluting the system with unnecessary enhancements. This is not a process you'd want to automate in my opinion. It requires a person (or 2) with
1) good knowledge of the framework
2) the enhancements brought in 7.0
3) the functionality as requested by the business
Hope this helps you!
Cheers, Roel -
Issue with creation of sales order in CRM system
Hi Experts,
Here are the details of the process we followed
1. We found a Function Module u201CBAPI_BUSPROCESSND_CREATEMULTIu201D which is used to create a sales order in CRM.
2. We have set a Break point in the FM u201CCRM_ORDER_MAINTAINu201D and tried to create a sales order using the transaction u201CCRMD_ORDERu201D. For this the parameters we have given are
a. sold-to-party
b. ship-to-party
c. quantity
d. product
And after this we have saved the order and the order is saved and in the debug mode we have the parameters in u201CCRM_ORDER_MAINTAINu201D and we found all these parameters in the FM.
3. After this we have given all the parameters mentioned above in the FM u201CBAPI_BUSPROCESSND_CREATEMULTIu201D and still the order is not created, gave an error message saying that CRM_ORDER: Incorrect values in the interface object.
4. We checked the CRM_ORDER badiu2019s interface and it is having only header guid to be given. We gave this header guid also in the FM u201CBAPI_BUSPROCESSND_CREATEMULTIu201D and then it gave a different error saying that : Document cannot be saved.
5. Finally we are not able to know the parameters to be passed to the FM to create an order.
Any inputs will be highly appreciated.
Thanks a lot in advance.
Lakshman.Hi Easwar,
Now i am able to create a sales order by passing the parameters to "BAPI_BUSPROCESSND_CREATEMULTI" and the parameters i am passing are Process_type in the ORDERADM_H, parner_fct (partner function), partner_no , Quantity and prod_ordered (product name) but after creation of sales order using my report program and if i see the sales order uisng transaction crmd_order (using transaction ID) or crmd_orderadm_h(using headerguid) or crm_order_index, only the PROCESS_TYPE is updated but the remaining parameters which i passed like QUANTITY,PRODUCT NAME,PARTNER NUMBER are not present in the sales order. I am providing the code which i have written for creation of the sales order. Can you please look into it and tell me where i might have went wrong??
*& Report ZCREATEORDER_TEST
REPORT ZCREATEORDER_TEST.
DATA : LV_HEADER_GUID TYPE GUID_32,
WA_HEADER TYPE BAPIBUS20001_HEADER_INS,
ITAB_HEADER TYPE STANDARD TABLE OF BAPIBUS20001_HEADER_INS,
ITAB_CREATED_PROCESS TYPE STANDARD TABLE OF BAPIBUS20001_HEADER_INS,
ITAB_OBJECTS_TO_SAVE TYPE STANDARD TABLE OF BAPIBUS20001_GUID_DIS,
ITAB_PARTNER TYPE STANDARD TABLE OF BAPIBUS20001_PARTNER_INS,
lt_product_i TYPE STANDARD TABLE OF BAPIBUS20001_ITEM,
wa_product_i type BAPIBUS20001_ITEM,
lt_schedlin_i type standard table of BAPIBUS20001_SCHEDLIN,
wa_schedlin_i type BAPIBUS20001_SCHEDLIN,
ITAB_INPUT_FIELDS TYPE TABLE OF bapibus20001_input_fields,
ls_inputfields TYPE bapibus20001_input_fields,
WA_PARTNER TYPE BAPIBUS20001_PARTNER_INS,
ITAB_RETURN TYPE STANDARD TABLE OF BAPIRET2,
WA_OBJECTS_TO_SAVE LIKE LINE OF ITAB_OBJECTS_TO_SAVE,
"To store the Objects to be saved.
WA_CREATED_PROCESS LIKE LINE OF ITAB_CREATED_PROCESS,
ITAB_SAVED_OBJECTS TYPE STANDARD TABLE OF BAPIBUS20001_OBJECT_ID,
WA_SAVED_OBJECTS LIKE LINE OF ITAB_SAVED_OBJECTS,
GC_X type c.
gc_x = 'x'.
CALL FUNCTION 'GUID_CREATE'
IMPORTING
ev_guid_32 = lv_header_guid.
CLEAR : WA_HEADER.
Passing the respective values from the Header table to internal table.
WA_HEADER-GUID = LV_HEADER_GUID.
WA_HEADER-PROCESS_TYPE = 'ZTA'.
APPEND WA_HEADER TO ITAB_HEADER.
*Appending the values to the ITAB_HEADER.
ls_inputfields-ref_guid = LV_HEADER_GUID.
ls_inputfields-REF_KIND = 'A'.
ls_inputfields-objectname = 'ORDERADM_H'.
ls_inputfields-logical_key = ' '.
ls_inputfields-fieldname = 'PROCESS_TYPE'.
APPEND ls_inputfields TO ITAB_INPUT_FIELDS.
*ls_inputfields-ref_handle = '0000000000'.
ls_inputfields-ref_guid = LV_HEADER_GUID.
ls_inputfields-objectname = 'ORDERADM_H'.
ls_inputfields-fieldname = 'MODE'.
APPEND ls_inputfields TO ITAB_INPUT_FIELDS.
ls_inputfields-ref_guid = LV_HEADER_GUID.
ls_inputfields-REF_KIND = 'A'.
ls_inputfields-objectname = 'ORDERADM_H'.
ls_inputfields-logical_key = ' '.
ls_inputfields-fieldname = 'GUID'.
APPEND ls_inputfields TO ITAB_INPUT_FIELDS.
CHANGES MADE
ls_inputfields-ref_guid = LV_HEADER_GUID.
ls_inputfields-REF_KIND = 'A'.
ls_inputfields-objectname = 'SCHEDLIN'.
ls_inputfields-logical_key = ' '.
ls_inputfields-fieldname = 'LOGICAL_KEY'.
APPEND ls_inputfields TO ITAB_INPUT_FIELDS.
ls_inputfields-ref_guid = LV_HEADER_GUID.
ls_inputfields-REF_KIND = 'A'.
ls_inputfields-objectname = 'SCHEDLIN'.
ls_inputfields-logical_key = ' '.
ls_inputfields-fieldname = 'MODE'.
APPEND ls_inputfields TO ITAB_INPUT_FIELDS.
ls_inputfields-ref_guid = LV_HEADER_GUID.
ls_inputfields-REF_KIND = 'A'.
ls_inputfields-objectname = 'SCHEDLIN_I'.
ls_inputfields-logical_key = ' '.
ls_inputfields-fieldname = 'GUID'.
APPEND ls_inputfields TO ITAB_INPUT_FIELDS.
ls_inputfields-ref_guid = LV_HEADER_GUID.
ls_inputfields-REF_KIND = 'A'.
ls_inputfields-objectname = 'SCHEDLIN_I'.
ls_inputfields-logical_key = ' '.
ls_inputfields-fieldname = 'QUANTITY'.
APPEND ls_inputfields TO ITAB_INPUT_FIELDS.
ls_inputfields-ref_guid = LV_HEADER_GUID.
ls_inputfields-REF_KIND = 'A'.
ls_inputfields-objectname = 'SCHEDLIN_I'.
ls_inputfields-logical_key = ' '.
ls_inputfields-fieldname = 'MODE'.
APPEND ls_inputfields TO ITAB_INPUT_FIELDS.
CHANGES MADE
WA_PARTNER-REF_GUID = LV_HEADER_GUID.
WA_PARTNER-REF_KIND = 'A'.
giving the partner function and partner no 000000038 for slod to party
WA_PARTNER-PARTNER_FCT = '00000038'.
WA_PARTNER-PARTNER_NO = '10017'.
APPEND WA_PARTNER TO ITAB_PARTNER.
*"ADDING VALUES for the product
wa_product_i-header = lv_header_guid.
wa_product_i-handle = '0000000001'.
wa_product_i-ordered_prod = '12000014'.
wa_product_i-mode = 'A'.
APPEND wa_product_i TO lt_product_i.
*"ADDING VALUES for quantity
wa_schedlin_i-quantity = 30.
wa_schedlin_i-handle = 1.
APPEND wa_schedlin_i TO lt_schedlin_i.
ls_inputfields-ref_guid = LV_HEADER_GUID.
ls_inputfields-REF_KIND = 'A'.
ls_inputfields-objectname = 'PARTNER'.
*ls_inputfields-logical_key = ' '.
ls_inputfields-fieldname = 'REF_GUID'.
APPEND ls_inputfields TO ITAB_INPUT_FIELDS.
ls_inputfields-ref_guid = LV_HEADER_GUID.
ls_inputfields-REF_KIND = 'A'.
ls_inputfields-objectname = 'PARTNER'.
ls_inputfields-logical_key = ' '.
ls_inputfields-fieldname = 'PARTNER_FCT'.
APPEND ls_inputfields TO ITAB_INPUT_FIELDS.
ls_inputfields-ref_guid = LV_HEADER_GUID.
ls_inputfields-REF_KIND = 'A'.
ls_inputfields-objectname = 'PARTNER'.
ls_inputfields-logical_key = ' '.
ls_inputfields-fieldname = 'PARTNER_NO'.
APPEND ls_inputfields TO ITAB_INPUT_FIELDS.
CALL FUNCTION 'BAPI_BUSPROCESSND_CREATEMULTI'
TABLES
HEADER = ITAB_HEADER
ITEM = lt_product_i
RETURN = ITAB_RETURN
PARTNER = ITAB_PARTNER
INPUT_FIELDS = ITAB_INPUT_FIELDS
CREATED_PROCESS = itab_created_process
SCHEDULELINE = lt_schedlin_i.
READ TABLE ITAB_CREATED_PROCESS INTO WA_CREATED_PROCESS WITH KEY GUID = LV_HEADER_GUID BINARY SEARCH.
WA_OBJECTS_TO_SAVE-GUID = WA_CREATED_PROCESS-GUID.
Appending the Guid of the contract to be saved to the internal table
APPEND WA_OBJECTS_TO_SAVE TO ITAB_OBJECTS_TO_SAVE.
CALL FUNCTION 'BAPI_BUSPROCESSND_SAVE'
EXPORTING
update_task_local = space
save_frame_log = GC_X
TABLES
objects_to_save = itab_objects_to_save
saved_objects = itab_saved_objects
return = itab_return.
Calling the Standard BAPI to Commit the transcation.
CALL FUNCTION 'BAPI_TRANSACTION_COMMIT'.
I have debugged the above code, all the values are passing are passing to the FM "'BAPI_BUSPROCESSND_CREATEMULTI'" and these passed to the CRM_ORDER_MAINTAIN and then to CRM_ORDER_READ which are called inside the "'BAPI_BUSPROCESSND_CREATEMULTI'". Finally the sales order is created but not able to see all the values that i am passing except PROCESS_TYPE.
Thanks a lot in Advance,
Lakshman. -
Prepping to upgrade from 10.2.8 to 10.4 -- problem with Disk Utility
I have an 17" iMac that I'm preparing to upgrade from 10.2.8 to 10.4. In preparation, I did the following:
* Mounted a new external HD (LaCie) (my second one)
* Backed-up all personal files / folders to the new drive
* Ran Software Update to check for any recent updates - updated iTunes (6.0.3) + an iPod update
* Ran Disk Utility to repair permissions (which I do whenever I've installed or deteted software) -- Have never had any issues, but this is where my problem started.
Repair permissions hangs at the end (status bar to the very end), and it appears to be working on permissions related to iTunes (sorry, will have to run Disk Utility again and follow-up with the specifics). I ran it twice with the same result.
I saw other threads suggesting that the problem may be with the latest iTunes update (recommending moving the iTunes application folder to the desktop and rerunning Disk Utility), but it seems specific to 10.3. Could this be an issue with 10.2.8 as well. If I can successfully complete repairs to permissions (with the above workaround), can I proceed with the 10.4 upgrade, and if so, what should I do with the iTunes application folder (keep it on the desktop, or move it back)?
ThanksCornelius ... thanks for the follow-up. I went ahead and tried both methods, although I should note that I didn't show the iTunes.pkg or iTunesPhoneDrive.pkg files in the Library>Receipts folder as described in the two approaches. I had no luck at all with Kappy's solution (I moved the one file I did have -- iTunesX.pkg -- and Disk Utility stalled as before). I moved iTunes.pkg back to its original folder, and tried the first method you described. I moved the iTunes app to my desktop, and I was able to successfully repair permissions. I trashed two files (iTunes3.pkg and iTunes4.pkg) and left the iTunesX.pkg file as instructed (again, I don't show the iTunesPhoneDriver.pkg file at all). I reran Disk Utility with the same faulty result.
I suspect it may have something to do with the missing files. Any thoughts on that?
Thanks again.
Max:
Sorry I misunderstood you. Actually you don't move
your iTunes folder at all. Here are a couple of
procedures. Since I have not had to use it I can't
vouch for either, but I have heard both have worked
for others.Just to catalogue the
solutions listed above
Here's what I did, and it worked fine.
1) Move iTunes onto the Desktop.
2) Run Disk Utility
3) Go to HD>Library>Receipts and trash all iTunes
.pkg files EXCEPT for iTunesX.pkg and
iTunesPhoneDriver.pkg
4) empty Trash.
5) move iTune from Desktop back to 'Applications'.
Hey presto. you should now be able to repair
permissions again.
HTH
Kappy’s solution
1. Navigate to the /Library/Receipts/ folder.
2. Locate the iTunes.pkg and iTunesX.pkg files and
move them to the Desktop.
3. Run Disk Utility and repair permissions.
4. Move the .pkg files back into the
/Library/Receipts/ folder.Note that you
are not moving the iTunes folder, but the .pkg files
from the Receipts folder. In the first method you
Trash some of them, in the second you move them back.
But you don't touch the iTunes application as such.
Good luck.
cornelius
PismoG4 550,
100GB 5400 Toshiba internal, 1 GB RAM; Pismo 500 OS X
(10.4.5) Mac OS X (10.4.5) Beige G3 OS
8.6 -
Upgrading from iPhone 3g to iPhone 4 - how to with no dataloss?
I am upgrading from an iPhone 3g to a iPhone 4. I don't want to lose any data (messages/contacts/apps) between the switch. I am currently using a desktop that I am synchronized with. However, once I get the iPhone 4, I want to synchronize my phone with my laptop. Am I able to synchronize my 3g with my laptop and save all data. Then move to my iPhone 4 and synchronize with no data loss?
Message was edited by: hyperhtmlAll iTunes content on your iPhone should be in your iTunes library on your computer - all music, movies, tv shows, and 3rd party apps.
If you have Sync Music selected under the Music tab for your iPhone sync preferences with iTunes - you don't have manually manage music and videos selected with their being no benefit with manually managing music and videos with an iPhone, after purchasing music from the iTunes store with your iPhone, the music will be copied to your iTunes library on your computer automatically the first time you sync your iPhone with iTunes after doing so.
The same with 3rd party apps when having Sync Apps selected under the Apps tab for your iPhone sync preferences, which should be selected for a number of reasons. With this selected, after downloading an app direct with your iPhone, the app will be copied to your iTunes library automatically the first time you sync your iPhone with iTunes after doing so.
Photos in your iPhone's Camera Roll can and should be imported by your computer as with any other digital camera. The Camera Roll is for temporary storage no different with any other digital camera.
And photos transferred from your computer via the iTunes sync/transfer process should remain on your computer.
If you don't have Sync Music selected and Sync Apps selected, with your 3G connected to iTunes, at the iTunes menu bar go to File and select Transfer Purchases From - the name of your iPhone. This should transfer all music purchased/downloaded from the iTunes store direct with your iPhone and the same for all 3rd party apps.
http://support.apple.com/kb/HT2109 -
E.g., reading an online newspaper. I will open many tabs with different articles. About 1 out of 10 tabs will have a 706 error, which goes away when I click the reload button.
It's most noticeable then, but it occasionally happens (1 out of 10 sites) when I click a single link off my bookmarks menu, or manually enter a URL.
I think FF is not y waiting long enough for some kind of response from the remote link.
Like I said, this started happening when I upgraded from 3.22All the page says is “failure to read response”
No proxy server.
I’ve got lots of add-ons: NoScript, BeefTaco, Ghostery, etc. How do I get a list for you automatically?
Here’s the response, if you can figure out who or what is generating it.
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN">
<html>
<head>
<title>706</title>
<meta http-equiv="Cache-Control" content="no-cache"/>
</head>
<body>
<p>
Failure to Read Response
</p>
</body>
</html -
Workflow upgrade from 2.6.0 to 2.6.4 with database 8i to 10g
Hi There,
I have installed oracle 10g and imported workflow schema owf_mgr from 8i database. There i faced problem with some tables related to system.wf_payload_t i tried to create those types manually and then try to import but again i failed to import those objects. Now after import i tried to upgrade workflow schema to 2.6.4 every thing worked fine, now when i am trying to access the home page via http://locahost:7777/pls/wf/wfa_html.home it ask for username and i have given owf_mgr and password, but it is not displaying the home page.
Where as when i tried to install a fresh workflow setup using 10g i succeded and the home page i can see.
I hope i have not confused u. Please help me with posible cause and what i should see because i am very new to workflow.
Thanks.
Kumar.Hi Craig,
From what I heard, there would not be another major ECC release in the near future. New functions have been and will be released in "Enhancement packages" - hopefully it is not another new term to you...
NetWeaver 7.1 has been released (Q3 2007? not Q3 2008 for sure). BI folks might know whether there will be a release 7.1 or not.
Best regards,
Victor -
Can i upgrade from snow leopard to mountain lion and stay with iTunes 10.7?
I woukld like to upgrade from snow leopard to mountain lion but i don't want the new iTunes 11. Is this possible?
Welcome to Apple Support Communities
Of course. Open the Mac App Store and purchase OS X Mountain Lion. Make a backup of your files with Time Machine and check that your applications are compatible > http://www.roaringapps.com
To upgrade to OS X Mountain Lion, you should have at least 4 GB of memory. You can check the amount of RAM you have in > About this Mac.
OS X Mavericks will be launched in weeks and will include new features > http://www.apple.com/osx/preview -
Upgraded 2007 to 8.8 PL15 and get error message when opening sales orders
Hi , I have upgraded an SBO system from 2007 to 8.8, PL15 and I get an error message whenever I recall a sales order entered after June 9th 2010. I do not get any error messgas on orders before that date. I can add new order no problem. Teh error message is:
1). [Microsoft][SQL Server Native Client 10.0][SQL Server]The conversion of a nvarchar data type to a datetime data type resulted in an out-of-range value.
'' (CRD2)
I have not got any UDFs that are date type...
Any ideas?
Thanks in advance!
SimonDear Simon,
Issue could be related to SBO_SP_TransactionNotification. Please comment out the code in the store procedure SBO_SP_TransactionNotification (Section: ADD YOUR CODE HERE)
and try to reproduce the issue again.
Regards,
Ladislav Meszaros
SAP Business One Forum Team -
Delivery from Project with reference to sales order
Dear All,
I am facing problem in delivery. In my case scenario is-
1. There are 10 materials with 20 quantities.
2. I create a sales order only for two material with 5 quantities and enter wbs element number.
Now when i use CNS0, enter sales order number and wbs elelment number system shows all 10 materials that I dont want means I want the materials that are included in sales order. Please help me how to control this.Please read SAP Help for a better under standing...
I mentioned below a line from SAP help for your info.
...... it selects material components, the system takes components into account that have been assigned to either a network or ...... ...
Please follow the below path to access the help..
SAP Help Portal >>> Logistics >>>> Project System >>> Material >>>> Delivery from Projects...... -
I had to upgrade to i-tunes 11.1.3 from my old i-tunes 10 so that my i-phone could get synced to i-tunes. I used to have several i-tunes libraries on my computer for various subjects. Like for movies, bird recordings, and songs I wrote myself. Now when I open i-tunes all the libraries open up at once in one library, it is completely reorganized, making it almost impossible to find my old songs, playlists, movies, etc. I just got done organizing my libraries, and now its all confused and Im terribly frustrated. How can I get my old organization back, and is it possible to have several libraries again, or both the old and new i-tunes on the same hard drive? Anyone have any advice how to organize my new i-tunes ?
What a waste of space to paste the code.
Why not ask in the iLife > iPhoto forum where your question belongs. -
Upgrade from 12.1.1 to 12.1.3 with DMZ configured
Hi All
Required patches for Upgrade
9239089
9239090
9239095
9817770
9966055
Step 1: shut down all the application services and database.
Step 2: Take a cold backup of both file systems (APPS Tier and DB Tier)
Step 3: Start the database listener and keep database in open state.
Step 4: Ensure the binutils -2.17.50.6-6.0.1.el5 .
If it is higher than above version downgrade it to avoid the error of relink module “MSSCPP”.
Step 5: Increase the size of table space APPS_TS_TX_DATA, SYSAUX and enable
auto extend on to the added datafile
Step 6: To check the datafile location and file ID query the below SQL statement
SQL>select file_name, tablespace_name from dba_data_files where tablespace_name='APPS_TS_TX_DATA' order by file_name;
Step 7: To increase the table space size, query the below SQL statement.
SQL>ALTER TABLESPACE APPS_TS_TX_DATA add datafile '/u01/oracle/TESTEBS/db/apps_st/data/a_txn_data_05.dbf' size 3G autoextend on;
Step 8: unzip the necessary patches and give the permissions to application user
to access the patches.
Step 9: Apply R12.AD.B.DELTA.3 - Patch 9239089
Create $ORACLE_HOME/appsutil/admin on the database server.
Copy adgrants.sql (UNIX) from this patch directory 9239089 to $ORACLE_HOME/appsutil/admin.
Set the environment to point to ORACLE_HOME on the database server.
Use SQL*Plus to run the script- $ sqlplus "/ as sysdba"
SQL> @$ORACLE_HOME/appsutil/admin/adgrants.sql APPS
Enable maintenance mode with adadmin, and set the environment to correct apps environment.
Apply 9239089 using adpatch tool
It prompts us the default location of the patch. We have to give the location of patch where its stored.
It prompts us driver file which was in the patch directory, we have to give it e.g.: u9239089.drv
Step 10: Apply Oracle E-Business Suite Release 12.1.3 patch 9239090
It prompts us the default location of the patch, we have to give the location. Example [/d01/oracle/NewVis/apps/12.1.3/9239090]
It prompts us the driver file for the patch, we have to give the file.
Example: [u9239090.drv] which was in the patch directory.
Step 11: Apply the Online help file patch 9239095
It prompts us the driver file for the patch, we have to give the file.
Example: [u9239095.drv] which was in the patch directory.
Step 12: Apply the consolidated patch 9817770
It prompts us the driver file for the patch, we have to give the file.
Example: [u9817770.drv] which was in the patch directory.
Step 13: Apply the help patch 9966055
It prompts us the default location of the patch, we have to give the location. Example [/d01/oracle/NewVis/apps/12.1.3/9966055]
It prompts us the driver file for the patch, we have to give the file.
Example: [u9966055.drv] which was in the patch directory.
Step 14: Run Autoconfig
Source the application env file. Then run autoconfig in apps tier.
$ $ADMIN_SCRIPTS_HOME/adautocfg.sh
Now generate the appsutil.zip file.
$ perl /bin/admkappsutil.pl
Copy appsutil.zip file in DB_HOME. Unzip the appsutil.zip file.
After sourcing the database env file run autoconfig in database tier.
Step 15: Run Pre-Clone
Now run preclone in db tier first, then in apps tier
perl adpreclone.pl dbTier
perl adpreclone.pl appsTier
These are all the steps we used to follow in the normal environments
Kindly let us the procedure to follow in the DMZ environments.
Regards
NiranjanDid you make sure the database patches listed in 761570.1 are applied before applying 12.1.3 upgrade patch? I don't see them listed in your post.
I just checked 12.1.1 freshly installed instance and found following patches missing on 11.1.0.7.0 database which is installed with 12.1.1
6460304
7684818
8639653
8940108
9066130
9554727
9743057
7319922 - Only for Linux x86_64
Regards,
Sayeed Salahuddin
Maybe you are looking for
-
Help ! How do I get a sheet of wallet size of the same picture to print
Hi, I have tried everything to get wallet size pictures to print. Can anyone please tell me how to get a sheet of the same picture in wallet size? I'm looking for a whole sheet of the same picture that I can cut and give away. I have iPhoto 09. I can
-
Dear Adobe, I need your help! On December 12th, 2012 I ordered (purchased) by mail an official copy of the boxed Adobe Photoshop Elements 11 software from B&H Photo (New York, NY). I installed it successfully without any problem on my then computer.
-
User Defined Fields greyed out for one user
Hi Experts, One of our users is a Super User but on the Business Partner Master Data screen, the User Defined Fields are greyed out. This is user specific as the issue is happening for the same user on 2 seperate PCs. Other users can update these UDF
-
The Perfect I/O Card for CS3
As I mentioned earlier, all I miss from my capture card days (Pinnacle DV-500 and Matrox RTX10) is the ability to have a global Input/Output (I/O) solution built into the Premiere application. The downside, as several posters have mentioned, of the M
-
Enhancement / Modification for Shopping Cart
Hi Experts We are thinking of adding a extra indicator to reflect that this particular approval was read b4 or not read. Pls refer to the link below for the screen shot... <a href="http://i137.photobucket.com/albums/q206/auguston/SRM/shoppingcart.jpg