Upgradation steps for FSG Reports from 11.5.10 to 12i and probable issues.

Hey i have one issue,
we are planning to upgrade FSG from 11.5.10 to 12i
i need steps to upgarde and what are probable issue while upgardation of FSG Reports.
If you have any link or document where we can see this its most welcome.
Many Thanks
Swapnil

Hi Swapnil ,
All upgrade steps (also for FSG if available) should be listed in the following manual:
Oracle® Applications
Upgrade Guide: Release 11i to Release 12
Release 12
Part No. B31566-01
Thanks,
KAR

Similar Messages

  • Post upgrade step for EP

    HI Friends,
    I have upgraded my EP from 6.0 to 7.0 successful with all component. ALos i am getting login screen. SO what are post upgrade step for EP.
    Thanks,
    Regards,
    Sachin

    HI ,
    System restart
    run the SICK verify the installation check
    Check developer traces on the operating system. Log on to
    Check the installed license and profile configuration (RZ10 and PFCG)
    confirm the  operation modes
    Perform a client copy
    Check the status of the SAP Web AS Java and the user SAPJSF
    Check the rdisp/j2ee_start profile parameter
    Check the current state of SAP Web AS Java using transaction SMICM
    SAP Load Generator
    Start SAP Load Generator (SGEN)
    Regards,

  • Can anyone give me step by step for calling FM from one SAP to another SAP

    can anyone give me step by step for calling FM from one SAP to another SAP
    points will be rewarded,
    thank you,
    Regards,
    Jagrut BharatKumar Shukla

    *& Report  RFC_FOR_CUSTOMER_LIST
    *& RFC to a Fn. module from another system which implements BAPI
    REPORT  rfc_for_customer_list.
    DATA:
      fl_status TYPE i.
    DATA:
      fs_message TYPE bapiret2.
    DATA:
      BEGIN OF fs_customers,
        id   TYPE s_customer,
        name TYPE s_custname,
      END OF fs_customers.
    DATA:
      t_customers LIKE
         STANDARD TABLE
               OF fs_customers.
    CALL FUNCTION 'Z_BAPI_GET_CUSTOMER_LIST' DESTINATION 'R3N'
      IMPORTING
        return = fs_message
      TABLES
        customerlist = t_customers.
    IF sy-subrc EQ 0.
      fl_status = 1.
      LOOP AT t_customers INTO fs_customers.
        WRITE:
          /10 fs_customers-id,
           30 fs_customers-name.
        AT LAST.
          WRITE:
            /,/5 'No of customers in R3N = ', sy-tabix.
        ENDAT.
      ENDLOOP.
    ELSE.
      MESSAGE 'RFC failed' TYPE 'S'.
      EXIT.
    ENDIF.
                           TOP-OF-PAGE EVENT                            *
    TOP-OF-PAGE.
      IF fl_status NE 0.
        WRITE:
          /12 'ID'   COLOR 6,
           32 'NAME' COLOR 6.
        SKIP.
      ENDIF.
    This is one small example...
    Regards,
    Pavan

  • Category 3 Upgrade Steps for Rel 11i

    Upgrading Oracle Applications Rel 11i manual page 4-2 lists three upgrade steps for Oracle Common Modules.
    Step 1: Delete all AK data for Production 16 Global Demo databases (conditionally required)
    Step 2: Check for invalid AK data in non-Global Demo databases (condionally required)
    Step 3: Fix invalid data in non-Global Demo databases (conditionally required)
    My Questions:
    1. What is AK data?
    2. What is the difference between a Global Demo database and a non-Global Demo database?
    3. Does the AutoUpgrade utility migrate the data from the Global Demo and non-Global Demo databases to the Vision database?
    null

    I do not have any experience with standbys, but pl see if these MOS Docs can help
    How To Upgrade A Primary Database And A Physical Standby To Oracle10gR2 (10.2)          (Doc ID 407040.1)
    Oracle11g Data Guard: Database Rolling Upgrade Shell Script          (Doc ID 949322.1)
    Applying Patch Sets / Interim Patches with Physical Standby Database in Place          (Doc ID 187242.1)
    Is it possible to use different RDBMS-releases on primary/standby within a Dataguard Configuration?          (Doc ID 1294585.1)
    HTH
    Srini

  • TS1314 can you write the steps for transferring photos from my pc to ipad2

    Can you please write down the steps for transferring photos from my PC to IPAD2?

    Sync photos to iPad
    http://support.apple.com/kb/HT4236

  • Post Installation steps for Messages archiving from Adapter engine

    Hi,
    Can any let me know the post installation steps for Archiving messages from AE.
    We are archiving the messages from Integration Engine (BC_XMB).
    This note refers to the Post installation steps... But i could not find them anywhere.
    Note 790226 - Messages in AdapterEngine/PCK database do not get archived
    Thanks,
    Tanuj
    Message was edited by:
            Tanuj Kumar Bolisetty

    Hi Tanuj,
    have a look at note 872388
    "2) For messages in the Adapter Framework: note 816022, question 8
    (deletion) and
    http://help.sap.com/saphelp_nw04/helpdata/en/cf/b2fc3f48ecc742e10000000a
    1550b0/content.htm (archiving)"
    Additionally consult the troubleshooting guide,page 110
    Set the adapter service properties (note 791379)
    Hope it helps
    Jaime

  • Is there any deffirence for master data from flat fime bi 7.0 and 3.5?

    hi friends,
    is there any deffirence for master data from flat fime bi 7.0 and 3.5?
    regards
    suneel.

    you can follow the same 3.x dataflow eventhough u upgrade.
    the only diff
    3.x - would be emulated DS
    7.0 - RSDS
    3.x - file path declared in infopack
    7.0 - is declared in DS (that would be inherted by infopack)
    Infosource - optional - works fine on both the versions
    creating a new DS, it has to be RSDS .. no way out

  • I have registered a credit card for purchasing apps from the app store. My bank has issued a new chip based card and now the 16 digit numbers have changed. How do I register the new card for flowless purchases?

    I have registered a credit card for purchasing apps from the app store. My bank has issued a new chip based card and now the 16 digit numbers have changed. How do I register the new card for flowless purchases?

    Go to Apple Menu > App Store > View my account > sign in and then edit the payment details with the new card details.  
    I am assuming that your card and supporting bank are in the same country as your residential (billing) address and that you are using the App Store of that country.

  • Steps for Creating Report  using LDB

    hellow sirs
    can u please tell Step by Step method for creating Reports using LDB method...
    if possible with screen Shots..
    thanking You
    Rahul

    Hi,
    Please refer the code below:
    Use the PNP LDB for this program,
    *: Report:  ZP_POSTCODE                                                :
    *: Date  :  2004                                                       :
    *: Description: Displays report of employees by postcode area,         :
    *:              includes current travelling allowances (i.e. parking   :
    *:              permit or transport card etc..)                        :
    *: Use:         Help encourage the use of car sharing and public       :
    *:              transport where appropriate.                           :
    REPORT  zp_postcode.
    type-pools: slis.                                      "ALV Declarations
    NODES: pernr.
    INFOTYPES: 0000, 0001, 0002, 0006, 0008, 0014, 0105, 0121.
    SELECTION-SCREEN BEGIN OF BLOCK pcode WITH FRAME TITLE text-s01.
    SELECT-OPTIONS: so_pcode FOR p0006-pstlz.
    SELECTION-SCREEN END OF BLOCK pcode.
    TYPES: BEGIN OF t_output,
      pernr       TYPE p0001-pernr,   "personnel name
      anredtxt    TYPE t522t-atext,   "title (based on p0002-anred)
      fname       TYPE p0002-vorna,   "first name
      lname       TYPE p0002-nachn,   "last name
      orgtx       TYPE t527x-orgtx,   "dept
      fte         TYPE p0008-bsgrd,   "fte
      parking(20) TYPE c,
      payslip     TYPE t526-sachn,        "payslip address
      telno       TYPE p0105-usrid_long,  "tel number(p0105-usrty = 0020)
      email       TYPE p0105-usrid_long,  "email (p0105-usrty = MAIL)
      postcode    type p0006-pstlz,
    END OF t_output.
    DATA: it_output TYPE STANDARD TABLE OF t_output INITIAL SIZE 0,
          wa_output TYPE t_output.
    *ALV data declarations
    data: fieldcatalog   type slis_t_fieldcat_alv with header line,
          gd_tab_group   type slis_t_sp_group_alv,
          gd_layout      type slis_layout_alv,
          gd_repid       like sy-repid,
          gt_events      type slis_t_event,
          gd_prntparams  type slis_print_alv,
          gd_count(6)    type n,
          gd_outtext(70) type c,
          gd_lines       type i.
    *START-OF-SELECTION.
    START-OF-SELECTION.
    clear: gd_count.
    GET pernr.
    * Infotype 0121 is used to store multiple contracts for personnel.
    * Field p0121-hpern contains the personnel number for the main contract.
      PROVIDE * from p0121 between pn-begda and pn-endda.
    *   Check if main contract
        if p0121-pernr ne p0121-hpern.
          reject.
        endif.
      ENDPROVIDE.
      add 1 to gd_count.
      concatenate 'Processing personnel data'(m10) gd_count into gd_outtext
                separated by ' '.
    * Display indicator for employee count
      perform progress_indicator using gd_outtext.
    * Retrieve datd from infotypes
      rp_provide_from_last p0000 space pn-begda pn-endda.
      rp_provide_from_last p0001 space pn-begda pn-endda.
      rp_provide_from_last p0002 space pn-begda pn-endda.
      rp_provide_from_last p0006 space pn-begda pn-endda.
      rp_provide_from_last p0008 space pn-begda pn-endda.
      rp_provide_from_last p0014 space pn-begda pn-endda.
    * Check post code
      CHECK p0006-pstlz IN so_pcode.  "cp
    * Post code
      wa_output-postcode = p0006-pstlz.
    * Personnel number
      wa_output-pernr = pernr-pernr.
    * Personnel title
      SELECT SINGLE atext
        FROM t522t
        INTO wa_output-anredtxt
       WHERE sprsl EQ sy-langu AND
             anred EQ p0002-anred.
    * First name
      wa_output-fname = p0002-vorna.
    * Last name
      wa_output-lname = p0002-nachn.
    * Organizational Unit text (dept)
      SELECT SINGLE orgtx
        FROM t527x
        INTO wa_output-orgtx
       WHERE sprsl EQ sy-langu AND
             orgeh EQ p0001-orgeh AND
             endda GE sy-datum.
    * FTE
      wa_output-fte = p0008-bsgrd.
    * Parking / travel deducted?
      CASE p0014-lgart.
        WHEN '7180' OR '7181' OR '7182'.
          wa_output-parking = text-002.
        WHEN '7183'.
          wa_output-parking = text-001.
        WHEN '7171' OR '7172' or '7173' or '7174' or
             '7175' or '7176' or '7177' or '7178'.
          wa_output-parking = text-003.
      ENDCASE.
    * Payslip Address
      SELECT SINGLE sachn
        FROM t526
        INTO wa_output-payslip
       WHERE werks EQ p0001-werks AND
             sachx EQ p0001-sacha.
      PROVIDE * from p0105 between pn-begda and pn-endda.
    *   Telephone numbers
        if p0105-usrty = '0020'.
           wa_output-telno = p0105-usrid_long.
        endif.
    *   Email address
        if p0105-usrty = 'MAIL'.
           wa_output-email = p0105-usrid_long.
        endif.
      ENDPROVIDE.
      append wa_output to it_output.
      clear: wa_output.
    *END-OF-SELECTION.
    END-OF-SELECTION.
    describe table it_output lines gd_lines.
    if gd_lines gt 0.
      perform build_fieldcatalog.
      perform build_layout.
      perform display_alv_report.
    else.
      message i003(zp) with 'No records found'.
    endif.
    *&      Form  PROGRESS_INDICATOR
    *       Displays progress indicator on SAP screen
    form progress_indicator using p_text.
      call function 'SAPGUI_PROGRESS_INDICATOR'
          exporting
    *         PERCENTAGE = 0
               text       = p_text.
    endform.                    " PROGRESS_INDICATOR
    *&      Form  BUILD_FIELDCATALOG
    *       Build Fieldcatalog for ALV Report
    form build_fieldcatalog.
      fieldcatalog-fieldname   = 'PERNR'.
      fieldcatalog-seltext_m   = 'Personnel No.'.
      fieldcatalog-col_pos     = 0.
      fieldcatalog-outputlen   = 10.
    *  fieldcatalog-emphasize   = 'X'.
    *  fieldcatalog-key         = 'X'.
    *  fieldcatalog-do_sum      = 'X'.
    *  fieldcatalog-no_zero     = 'X'.
      append fieldcatalog to fieldcatalog.
      clear  fieldcatalog.
      fieldcatalog-fieldname   = 'ANREDTXT'.
      fieldcatalog-seltext_m   = 'Title'.
      fieldcatalog-col_pos     = 1.
      append fieldcatalog to fieldcatalog.
      clear  fieldcatalog.
      fieldcatalog-fieldname   = 'FNAME'.
      fieldcatalog-seltext_m   = 'First Name'.
      fieldcatalog-col_pos     = 2.
      append fieldcatalog to fieldcatalog.
      clear  fieldcatalog.
      fieldcatalog-fieldname   = 'LNAME'.
      fieldcatalog-seltext_m   = 'Last Name'.
      fieldcatalog-col_pos     = 3.
      append fieldcatalog to fieldcatalog.
      clear  fieldcatalog.
      fieldcatalog-fieldname   = 'ORGTX'.
      fieldcatalog-seltext_m   = 'Department'.
      fieldcatalog-col_pos     = 4.
      append fieldcatalog to fieldcatalog.
      clear  fieldcatalog.
      fieldcatalog-fieldname   = 'FTE'.
      fieldcatalog-seltext_m   = 'FTE'.
      fieldcatalog-col_pos     = 5.
      append fieldcatalog to fieldcatalog.
      clear  fieldcatalog.
      fieldcatalog-fieldname   = 'PARKING'.
      fieldcatalog-seltext_m   = 'Parking/Metrocard'.
      fieldcatalog-col_pos     = 6.
      append fieldcatalog to fieldcatalog.
      clear  fieldcatalog.
      fieldcatalog-fieldname   = 'PAYSLIP'.
      fieldcatalog-seltext_m   = 'Payslip Add.'.
      fieldcatalog-col_pos     = 7.
      append fieldcatalog to fieldcatalog.
      clear  fieldcatalog.
      fieldcatalog-fieldname   = 'TELNO'.
      fieldcatalog-seltext_m   = 'Telephone'.
      fieldcatalog-col_pos     = 8.
      append fieldcatalog to fieldcatalog.
      clear  fieldcatalog.
      fieldcatalog-fieldname   = 'EMAIL'.
      fieldcatalog-seltext_m   = 'E-mail'.
      fieldcatalog-col_pos     = 9.
      append fieldcatalog to fieldcatalog.
      clear  fieldcatalog.
      fieldcatalog-fieldname   = 'POSTCODE'.
      fieldcatalog-seltext_m   = 'Post code'.
      fieldcatalog-col_pos     = 10.
      append fieldcatalog to fieldcatalog.
      clear  fieldcatalog.
    endform.                    " BUILD_FIELDCATALOG
    *&      Form  BUILD_LAYOUT
    *       Build layout for ALV grid report
    form build_layout.
      gd_layout-no_input          = 'X'.
      gd_layout-colwidth_optimize = 'X'.
      gd_layout-totals_text       = 'Totals'(201).
      gd_layout-zebra             = 'X'.
    endform.                    " BUILD_LAYOUT
    *&      Form  DISPLAY_ALV_REPORT
    *       Display report using ALV grid
    form display_alv_report.
      gd_repid = sy-repid.
      call function 'REUSE_ALV_GRID_DISPLAY'
           exporting
                i_callback_program      = gd_repid
                is_layout               = gd_layout
                it_fieldcat             = fieldcatalog[]
                i_save                  = 'X'
           tables
                t_outtab                = it_output
           exceptions
                program_error           = 1
                others                  = 2.
      if sy-subrc <> 0.
    * MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
    *         WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
      endif.
    endform.                    " DISPLAY_ALV_REPORT

  • Need help in RFP - Migration Estimates for Crystal Reports from BI 3.1 to 4.1

    Hi,
    I have to migrate 100 crystal reports from BI 3.1 to 4.1. The reports vary from simple to complex in terms of complexity.
    I want to know the time estimates (no. of hours/report) for the above upgradation for a client proposal.
    What all parameters should i mention in the proposal?
    Thanks

    You don't actually have to upgrade the reports to a newer version of Crystal in order to migrate them from BO 3.1 to BI 4.1 and have them work.  BI 4.1 will work correctly with Crystal Reports that have been created in Crystal XI r2 and higher.  The inner structure of the .rpt file is essentially the same, with new things being added when new features from the newer versions are used.
    Some things to remember when migrating Crystal reports using the Upgrade Management Tool (based on my experience migrating a number of clients from 3.1 to 4.x):
    1.  If the reports were saved with a specific printer, make sure that the printer has been configured on the BI 4.1 server.  In 3.1 this was not an issue, but there's a change in printer processing in the newer versions of Windows Server where BI 4.1 will run that cause errors/warnings in the migration of these reports.
    2.  If your reports use ODBC connections, make sure that ALL of the required connections have been created prior to migration.  Even though BI 4.1 is 64-bit software, the Crystal "servers" are still 32-bit, so they require 32-bit connections.  If you're connecting to MS SQL Server, make sure you use SQL Server Native Connection 10.0 or 11.0 for these connections.
    3.  If you have Dynamic Parameters and you've had to make any changes to which DB drivers are used - even if it's in an ODBC connection that has the same name as the old system, be aware that you'll have to create new data connections that use the new ODBC connections or drivers and then point the data foundations to the new data connections - otherwise your dynamic parameters won't work.
    -Dell

  • Creating a Step for Background Job from within ABAP Program

    Step-1: I have a Report in ECC, which is scheduled as Background Job, which writes the file to the Application Server(UNIX)
    Step-2:  Trigger a Unix Command to ftp the file to other server.
    Both Step-1 & Step-2 can be done from SM36. 
    Another Scenario:
    Users can run the report in background from SE38 or using the transaction code for the report, In this case we want to call the external command.
    Instead of calling the External Command as below in the report, I want to create a Step from within the program when it is scheduled in background mode.
    CALL 'SYSTEM' ID 'COMMAND' FIELD lc_unixcom.    [ Here lc_unixcom has the External Command ].
    Any ideas??? Appreciate help.

    Hi,
    For submitting a report step, you may use either SUBMIT ... VIA JOB ... or JOB_SUBMIT function module.
    For external commands, this should be done only by calling JOB_SUBMIT function module.
    Sandra

  • Little help for calling report from a form

    hi,
    I AM NOT ABLE TO CALL THE REPORT WITH THE FOLLOWING CODE. PLEASE TELL ME WHERE I AM DOING WRONG! THANKS A LOT!!
    It is Oracle 9i and Reports 6i.
    -> I have a form with only one BUTTON.
    -> I have a REPORT with only one USER PARAMETER 'P_1' which is a number.
    -> I have only one query INSIDE the report. It is "SELECT * FROM EMP WHERE EMPNO = :P_1'
    -> I added the report to form in the OBJECT NAVAVIGATOR of FORM and the NAME OF REPORT is 'REOPRT4'
    here is the code on the form:
    ================================
    When_button_pressed
    DECLARE
    vid report_object;
    vname varchar2(100);
    BEGIN
    vid := find_report_object('Report4');
    vname := run_report_object(vid);
    END;
    ==================================
    -> the FORM and REPORT are in "c:\helloworld" directory.
    -> the error I am getting is 'internal pl/sql error'
    -> I WANT THE USER TO ENTER THE RUNTIME PARAMETER FOR THE REPORT AT RUNTIME, so no need to worry about supplying the parameter through code!!!
    Thank You very much. I appreciate your kind help!!

    I think that you have to add some code, see page 15 in this:
    http://otn.oracle.com/products/forms/pdf/277282.pdf
    Helena

  • Steps for Data extraction from SAP r/3

    Dear all,
    I am New to SAP Bw.
    I have done data extraction from Excel into SAP BW system.
    that is like
    Create info objects > info area> Catalog
                                                --> Character catalog
                                                --> Key catalog
    Create info source
    Upload data.
    create info cube
    I need similar steps for data extraction for SAP R/3
    1. when data is in Ztables ( using Views/Infosets/Function etc)
    2. When data is with Standard SAP using Business Content.
    Thanks and Regards,
    Gaurav Sood

    hi,
    chk the links
    Generic Extraction
    https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/84bf4d68-0601-0010-13b5-b062adbb3e33
    CO-PA
    http://help.sap.com/saphelp_46c/helpdata/en/7a/4c37ef4a0111d1894c0000e829fbbd/content.htm
    CO-PC
    https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/fb07ab90-0201-0010-c489-d527d39cc0c6
    iNVENTORY
    https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/f83be790-0201-0010-4fb0-98bd7c01e328
    Extractions in BI
    https://www.sdn.sap.com/irj/sdn/wiki
    LO Extraction:
    /people/sap.user72/blog/2004/12/16/logistic-cockpit-delta-mechanism--episode-one-v3-update-the-145serializer146
    /people/sap.user72/blog/2005/01/19/logistic-cockpit-delta-mechanism--episode-three-the-new-update-methods
    /people/sap.user72/blog/2005/02/14/logistic-cockpit--when-you-need-more--first-option-enhance-it
    /people/sap.user72/blog/2004/12/23/logistic-cockpit-delta-mechanism--episode-two-v3-update-when-some-problems-can-occur
    /people/sap.user72/blog/2005/04/19/logistic-cockpit-a-new-deal-overshadowed-by-the-old-fashioned-lis
    Remya

  • New Tcodes for COPA Reports from KE31

    Hi All.
    I have created several report for COPA from KE31. Now i want to create seperate TCodes for each report. So please kindly guide me how can i generate TCode for these reports.
    I will be thankful.

    Hi,
    Get the generated name of ur program from ur tcode.
    Then goto se93
    give transaction code and click create
    select the second radio button(transaction code for reports)
    give short description and press enter
    after that give your program name
    and select the gui check boxes as required for html ,java,
    and save it
    you can use the transaction code
    REGARDS
    JAGADISH

  • Transaction code for COPA reports from KE31

    Hi All.
    I have create several report for COPA from KE31. Now i want to create seperate TCodes for each report. So please kindly guide me how can i generate TCode for these reports.
    I will be thankful.

    Ideally its best for an ABAP Developer to do this... You should be able to do this using SE93
    Enter the Program name SAPMKCEE, and Screen 5000.
    Cheers.

Maybe you are looking for