Upgrade database for RAC
I have 11g standard edition database installed without RAC in a server environment. But, now I have needed to keep this database in RAC. Could I install or upgrade database with RAC environment without re-installation of oracle software/database from the scratch?
depends
you can relink the database home with RAC option on Linux/UNIX platforms: RAC Survival Kit: Rac On / Rac Off - Relinking the RAC Option [ID 211177.1]
but not on Windows
if you already have grid infrastructure (clusterware) configured as Oracle Restart, you can convert it to cluster configuration:
http://docs.oracle.com/cd/E11882_01/install.112/e22489/rem_orcl.htm#CBHEEJAA
otherwise you will have to install it (this can be higher version than your database home)
Similar Messages
-
User/Admin guide after upgrade database for recover db provided by Oracle?
Does anyone has a user/admin guide which is provided by oracle about using RMAN and how to use RMAN to RECOVER database tailor make for after upgrade database? I have been searching for a long time and don't find this document.
Anyone has this, please share.
FANLook in the Backup & Recovery section:
http://www.oracle.com/pls/db102/portal.portal_db?selected=4 -
Duplicate Target database for RAC
Oracle Database 11g Enterprise Edition
Red Hat Linux
Hi
I am cloning a RAC database using Duplicate Target Database command. First we need to create one Auxiliary Instance using the init file of RAC source database.
I see the following in the init file,
MDB1.undo_tablespace='UNDOTBS1'
MDB2.undo_tablespace='UNDOTBS2'
What should I specify in the init file of Auxiliary instance for these Undo tablespaces ? I am setting CLUSTER_DATABASE to FALSE since the Duplicate database is a single instance one. Only the Source database is RAC.
I am cloning only SYSTEM, SYSAUX, One User tablespace and the Two Undo tablespaces for a point in time 14 days back. I am skipping all other tablespaces.Hi Morgan,
Is this correct to specify in the Init file ?
*.undo_tablespace='UNDOTBS1'
here UNDOTBS1 is already UNDO tablespace of one instance as I already mentioned. -
Error upgrade database for Hana B1
Dears,
I can't upgrade database from B1 PL04 to B1 PL11 because the database is not ready it show me below figure:
and I Disconnected all applications from the databases but i cant make Upgrade .Hi Mohammed,
Go to Task Manager and then Click Process Tab.
Now Click View Just above Process Tab and Select SELECT COLUMN.
After Clicking SELECT COLUMN a window will appear. Now from that window Find PID (Process Identifier) and Tick check box. After Ticking Check Box Click OK.
Now you can see one more Column in Process Tab for PID.
From PID Column you can find you Process No and End Process by doing Right Click.
Hope this help
Regards::::
Atul Chakraborty -
Manually Setting up a Standby Database for RAC Environment
Hi,
I am a Junior DBA so apologies if this sounds like a silly question.
We have production 11g Extended RAC environment setup. Management have asked for a separate single instance database be setup as a standby DB on a separate 'cold' server in case we lose complete connection to both sides of the RAC. I read up on Oracle Data Guard and presented this as a solution, but they seem adamant about manually going in and copying out the latest backup and archive logs over to the standby database.
Can this be done? I mean, can ASM managed backup files and archive logs from one database be simply copied out of the backup directory and imported into a completely separate database as easy as that?
We are using ASM to manage to data files on the RAC. My understanding is that we cant manually access the files on an OS level when using ASM, but maybe I am wrong. Any help or opinions on this would be greatly appreciated.
Rgs,
RobHi,
Can this be done? I mean, can ASM managed backup files and archive logs from one database be simply copied out of the backup directory and imported into a completely separate >database as easy as that?Yes, but depends on DB version.
what is the DB version.
from 11g you have cp command so there is a possibility to copy generated archive logs to standby location, so that you can apply..
In 10g there is no such option. you need to create a standby database. with automatic shipping
Thanks -
In-place upgrade of Enterprise Manager for RAC databases is not supported
upgrading 2 node RAC from 10.2.0.1 to 10.2.0.3 on Windows 2003 64 bit. I got the following:
In-place upgrade of Enterprise Manager for RAC databases is not supported in this release
Now I cannot log in to the database control as sys with sysdba role . I get "invalid username/password" error
I can login as a dba user
I also get a java error after I log in, some thing about class not found, but then I'm in and I can do everything that I try, although I haven't tried scheduling a backup yet
Can I upgrade EM to 10.2.0.3?
If so, how?On the patchset readme...
11.3 Upgrade of Oracle Enterprise Manager Not Supported
When you start Oracle Database Upgrade Assistant to upgrade 10.2.0.1 database to 10.2.0.3 patch set, the following error occurs:
Inplace upgrade of Enterprise Manager is not supported for RAC databases is not supported in this release
Workaround:
Ignore warning.
If you drop and recreate the EM repository?
1). emca -deconfig dbcontrol db repos drop
2). emca -config dbcontrol db -repos create
Be careful, doing this put the database on QUIESCE mode.
Regards,
Rodrigo Mufalani -
Hi guys...How is everything.....
I have Node RAC on Windows2003R2 Itaniam. I Need to know is there any procedure for OS upgradation for RAC..I mean shall I down the Cluster & Database when OS up gradation..Hi JIC,
Please be more specific. Do you plan upgrade OS for Win2008? Or did you means service packs and patches through windows update?
In general, if your OS is certified by Oracle to run RAC if you are using service pack 1,2,3 doesn't matter, they are certified too.
"The Oracle Clusterware and Oracle Real Application Clusters both support rolling upgrades of the OS software when the version of the Oracle Database is certified on both releases of the OS (and the OS is the same, no Linux and Windows or AIX and Solaris, or 32 and 64 bit etc.). This can apply a patch to the operating system, a patchset (such as EL4u4 to EL4u6) or a release (EL4 to EL5). Stay within a 24 hours of upgrade window and fully test this path as it's not possible for Oracle to test all these different paths and combinations."
This rule is valid to Unix/Linux and windows Systems.
You can check it on My Oracle Support note ID 220970.1
Best Regards,
Rodrigo Mufalani
www.mufalani.com -
Restoring Back To 10g After A Failed 11g Upgrade Of a RAC Database
I'm testing this out on a small test RAC database. I successfully upgraded it from 10.2.0.4 to 11.2.0.2 but wanted to test the scenario of having to go back to 10g if the upgrade really hosed up. The first recovery attempt seemed to be successful but after bringing the DB down with srvctl, it failed on the next startup saying it needed to be started in upgrade mode. Something from 11g was still in place or the fact that I was trying to restart a 10g database managed by 11g clusterware was the issue. I tried starting the DB from both 10g and 11g environments and got the same result. Even starting each instance individually got the same result.
In all that I tried, I got the usual incarnation and "until time before reset time" messages. I've been doing this all through RMAN without EM or Grid Ctl. As usual, any docs I found have had just a little information and I have to piece my own instructions together from all of them, not knowing for sure it all steps would apply in my situation.
Can anybody point me to a good doc or other resource that might help me out? Many thanks!Now I have a different issue with apparently the same problem. I successfully did the restore/recover as before but the thing pukes when I open resetlogs at the end. Something, somewhere is still pointing to 11g but I have no idea where or what has changed since the last time I did this. Maybe I've messed things up by doing this multiple times. Here are my RMAN commands:
RMAN> connect target
RMAN> startup force nomount;
RMAN> RESTORE SPFILE TO '+DATA/jimg/spfilejimg.ora' from '/local/oracle/10.2.0/db_1/dbs/c-2526333028-20110915-01';
RMAN> shutdown immediate;
(in a different session, from command line)
% mv /local/oracle/10.2.0/db_1/dbs/initJIMG1.ora.bak /local/oracle/10.2.0/db_1/dbs/initJIMG1.ora
RMAN> startup force nomount pfile='/local/oracle/10.2.0/db_1/dbs/initJIMG1.ora';
RMAN> restore controlfile from '/local/oracle/10.2.0/db_1/dbs/c-2526333028-20110915-01';
RMAN> alter database mount;
RMAN>
run {
restore database;
recover database;
RMAN> alter database open resetlogs;
The errors I get after resetlogs are:
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03002: failure of alter db command at 09/16/2011 09:24:50
ORA-01092: ORACLE instance terminated. Disconnection forced
ORA-00704: bootstrap process failure
ORA-39700: database must be opened with UPGRADE option
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
ORA-03114: not connected to ORACLE
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03002: failure of alter db command at 09/16/2011 09:24:50
ORA-01092: ORACLE instance terminated. Disconnection forced
ORA-00704: bootstrap process failure
ORA-39700: database must be opened with UPGRADE option
This is being done on a small, expendable database for practice. I think I've learned enough about what NOT to do to keep me from getting in this jam to begin with. Any thoughts? -
Metalink Document IDs for RAC database
Hello,
This is Khalid, Plz any body could give me metalink document id's for RAC database managing and monitoring, backup and recoveries etc.. plz any document id related to RAC databases.....
Thanks & Regards
KhalidClusterware References
Metalink Notes
259301.1 CRS and 10g RAC
This note contains a useful awk script to improve the output of crs_stat -ls
436067.1 Windows CRS_STAT script to display long names correctly
309541.1 How to start/stop the 10g CRS Clusterware
263897.1 How to stop Cluster Ready Services (CRS)
298073.1 How to remove CRS auto start and restart for a RAC instance
295871.1 How to verify if CRS install is valid
316583.1 VIPCA fails complaining that interface is not public
341214.1 How to cleanup after a failed (or successful) Oracle Clusterware installation
280589.1 How to install Oracle 10g CRS on a cluster where one or more nodes are not to be configured with CRS immediately
357808.1 CRS Diagnostics
272331.1 CRS 10g Diagnostic Guide
330358.1 CRS 10g R2 Diagnostic Collection Guide
331168.1 Oracle Clusterware consolidated logging in 10gR2
342590.1 CRS logs not being written
357808.1 Diagnosability for CRS/EVM/RACG
459694.1 Procwatcher: Script to Monitor and Examine Oracle and CRS Processes
289690.1 Data Gathering for Troubleshooting RAC and CRS issues
265769.1 Troubleshooting CRS Reboots
240001.1 Troubleshooting CRS root.sh problems (10g RAC)
239989.1 10g RAC - Stopping Reboot Loops when CRS problems occur
294430.1 CSS Timeout Computation in 10g RAC
284752.1 10gRAC: Steps to Increase CSS Misscount, Reboottime and Disktimeout
462616.1 Reconfiguring the CSS disktimeout of 10gR2 Clusterware for proper LUN failover
293819.1 Placement of voting and OCR disk file in 10g RAC
317628.1 How to replace a corrupt OCR mirror file
452486.1 Moving OCR and Voting Disk to another location
399482.1 How to recreate OCR/Voting disk accidentally deleted
358620.1 How to recreate OCR/Voting disk in 10gR1/R2 RAC
279793.1 How to Restore a Lost Voting Disk in 10g
264847.1 How to Configure Virtual IPs for 10g RAC
283684.1 How to change interconnect/public interface IP subnet in a 10g cluster
276434.1 Modifying the VIP or VIP Hostname of an Oracle 10g Clusterware Node
294336.1 Changing the check interval for the Oracle 10g VIP
219361.1 Troubleshooting Instance Evictions (ORA-29740)
297498.1 Resolving Instance Evictions on Windows platforms
315125.1 What to check if the Cluster Synchronization Services daemon (OCSSD) does not start
270512.1 Adding a node to a 10g RAC Cluster
269320.1 Removing a node from a 10g RAC Cluster
338706.1 Cluster Ready Services (CRS) rolling upgrade
399031.1 Step-by-step installation of Oracle Clusterware one-off and bundle patches for Oracle 10g
401783.1 Changes in Oracle Clusterware after applying 10.2.0.3 Patchset
405820.1 Known Issues After Applying 10.2 CRS bundle patches
316817.1 Cluster Verification Utility (CLUVFY) FAQ
372358.1 Shared disk check with the Cluster Verification Utility
338924.1 CLUVFY Fails with error - could not find a suitable set of interfaces for VIPs
Bugs
5849200 CRS LOGS ARE NOT BEING WRITTEN
5137401 OPROCD LOGFILE IS CLEARED AFTER A REBOOT
Fixed in Oracle 10.2.0.4+ and 11.1.0.6+
source: http://www.juliandyke.com/References/Clusterware.html
regards,
Rajeshkumar Govindarajan.
http://oracleinstance.blogspot.com -
How can I have a collective AWR report for RAC database in 10gR2 and 11gR1?
Plz correct me here
awrrpt.sql takes the snapshot at the instance level and incase we have 5 instances we have to take 5 awr reports for a particular period.correct???
If above is true ,any wayout to collect a single collective AWR report for RAC database which includes information on all the instances in Oracle 10g R2 or 11gR1 ?
Thanks in advance
GaganI have never come across a way for this. though I can n't say it is not there.
But I guess it may not be feasible too becuase as we know the current AWR report contains data which is specific for one instance.
Various hit ratios, top events, instance effeciency reports.... what not ..
It would be really nice to see something is a new format where it lists values from each instance in a single report.. I guess such a thing Does not exiist as of now. -
NETCA listener configuration error for RAC database
Hi,
WE have a RAC setup on 2 nodes and now we want to change the default listener port for RAC database.
Database ver: 10.2.0.4
We now that srvctl does not work to add listener manually to CRS.
We are now using netca to create new listener on both the RAC nodes but it gives error throwing :
Problem in configuration : Node(S): hostname
Try again...
When we try to start the listener say listener_I it throws following error:
Problem in configuration :node1
Listener start to failed:Listener may already be running
CRS-0215:Could not start resource
This is urgent
any help is appreciated.
Regards,
Milanuser12073248 wrote:
How you fix it? write to [email protected]
Hi Mauricio,
In this forum we help for free regardless of priority.
First you try to help in the forum if the author of the post request your e-mail you give to him.
Hope you understand it.
Thanks in advance for doing your part to make this community as valuable as possible for everyone!
Levi Pereira -
Re: Upgrading java for database
Hi,
I have upgraded my java for applications using
Using J2SE Version 6 with Oracle E-Business Suite 11i (Doc ID 401561.1) .
My java for database is still old , In one of the post i have seen that to upgrade java for database same above Doc should be used .
But there is no procedure mentioned for this , should the java be upgraded for database or the old version should be continued ?
Regards .Hi all
Got the Doc ans sol
Using Latest Java 6.0 Update With Oracle E-Business Suite Release 12 (Doc ID 455492.1)
Section 3
Section 3: Upgrading to Latest JRE 6.0 on Database Tier Node -
Standalone Standby Creation for RAC database
Hi,
I am in process of configuring standalone standby for my RAC database. The database version is 11.2.0.3. RAC is using SCAN listeners. I have got MOS for configuring standalone standby for RAC 387339.1. But specific steps I need to perform in case of SCAN listeners.
Any document or link is appreciated.
Regards,Hello;
The white paper "Rapid Oracle RAC Standby Deployment: Oracle Database 11g Release 2" has a section on this.
http://www.oracle.com/technetwork/database/features/availability/maa-wp-11g-rac-standby-133152.pdf
This may also help :
http://www.oracle.com/technetwork/database/availability/maa-wp-11g-racone-standby-501088.pdf
And these :
Configuring and Administering Oracle Net Listener
http://docs.oracle.com/cd/E11882_01/network.112/e10836/listenercfg.htm
srvctl relocate scan
http://download.oracle.com/docs/cd/E11882_01/rac.112/e16795/srvctladmin.htm#RACAD7499
srvctl relocate scan_listener
http://download.oracle.com/docs/cd/E11882_01/rac.112/e16795/srvctladmin.htm#CDDIDDCF
Troubleshooting Oracle Clusterware
http://download.oracle.com/docs/cd/E11882_01/rac.112/e16794/troubleshoot.htm#CHDFJIEG
From Oracle support :
How to Setup SCAN Listener and Client for TAF and Load Balancing [Video] [ID 1188736.1]
Best Regards
mseberg -
RMAN Backup script for RAC Database..please suggest
Hi All,
I am currently working on backup policy for RAC Database for my client.The client requirement is to backup while database is shutdown(mount state).I have made below script and could any one please suggest what further things should I need to add with below rman script.
echo "Shutdown Database";date
srvctl stop database -d PROD
srvctl status database -d PROD
echo "Database shutdown on";date
echo "Mount Database ";date
srvctl start instance -d PROD -i "PROD1" -o mount
srvctl status database -d PROD
echo "Start Full Database Backup on";date
$ORACLE_HOME/bin/rman target / nocatalog <<EOF
configure controlfile autobackup on;
configure controlfile autobackup format for device type disk to '/BACKUP/PRODBKP/%F';
run{
allocate channel c1 device type disk connect 'sys/******@node1-vip:1521/PROD';
allocate channel c2 device type disk connect 'sys/*****@node2-vip:1521/PROD';
backup format '/BACKUP/PRODBKP/PROD_df_%t_%s_%p.bak'(database);
backup format '/BACKUP/PRODBKP/archive_%t_%s_%p.bak' archivelog all;
copy current controlfile to '/BACKUP/PRODBKP/PROD.ctl';
delete noprompt obsolete;
release channel c1;
release channel c2;
exit
EOF
echo "RMAN Backup Finished on";date
echo "Shutdown Database";date
srvctl stop database -d PROD
echo "Start Database";date
srvctl start database -d PROD
srvctl status database -d PROD
Please share your experiences.
RegardsHi,
Some tweaks for your script.
echo "Shutdown Database";date
srvctl stop database -d PROD
srvctl status database -d PROD
echo "Database shutdown on";date
echo "Mount Database ";date
srvctl start instance -d PROD -i "PROD1" -o mount1. If you database does not shutdown properly , does your script stops the execution of next step?
2. configure controlfile autobackup on;
configure controlfile autobackup format for device type disk to '/BACKUP/PRODBKP/%F';(Why you need to configure this every time) ?
It's persistent at db level one time setting (until some other script changes the settings by other dba - else remove that - set the configuration at db level once for all)
- Pavan Kumar N
3. -
the "upgrading database" phase which should "take a couple of minutes" has taken over a month and it's still only a quarter of the way done. i'm on a macbook pro that is just under a year and a half old.
this is the screen i'm on / have been on:
what can i do to expedite this process?See Here:
http://www.apple.com/macosx/uptodate/
Maybe you are looking for
-
User exit PCPO0001-EXIT_RPCIPE00_002 not working
We have activated User exit PCPO0001- EXIT_RPCIPE00_002, requirement was to set the line item text SGTXT of the subsequent Accounting document, but there seem to be no activity happening for it (assigned breakpoints in the exit codes but transaction
-
Reports Size (URgent) !!!
Hi Does anybody have solutions to the following : 1) If the report size (REPORTS 3.0) is more than 4MB & after saving the report & re-opening the same, I find some fields missing in the layout editor. 2) How do I supress system error message in Repor
-
Account Clearing fails with update terminated
we are trying to clear our accounts General Ledger, Vendors and Customers (FB1D, FB1K, FB1S) and it fails it gives an express document and it says update was terminated and it gives error info : F1 801: Clearing line item 002. what could be the cause
-
How to use SoftBank' s iPhone 4S @Thailand
My wife can not use my iPhone 4S in Thailand. How to unlock my iPhone to use in Thailand. I do not need Jailbreak or Gevey sim. I think apple support can do. Please let me know about that.
-
First of all sorry if wrong spot... And yes I could contact the vendor...but thought folks here might know. I download ivolume...I love it...and am more than happy to pay for it... I expected the free trial version to expire by now...but it hasn't...