User exit PCPO0001-EXIT_RPCIPE00_002 not working

We have activated User exit PCPO0001- EXIT_RPCIPE00_002, requirement was to set the line item text SGTXT of the subsequent Accounting document, but there seem to be no activity happening for it (assigned breakpoints in the exit codes but transaction PCP0 does not stop at the breakpoint).
I have created the Include program and the actviated the Exit and the Project from SMOD and I think I have followed all the necessary steps.
Is there anything I am missing, are there any Business Transaction Events that we can use instead.
Would be greatful for your reply.
Regards

Thanks for your reply
We did tried to apply breakpoints on EXIT_RPCIPE00_001 but it did not stop at that also, although we haven't implemented EXIT_RPCIPE00_01's INCLUDE program does that makes any difference ?
Is there any other way we can run our code during payrol's posting to accounting?
Our scenartio is that we need to add some Text from the Payroll information into the subsequent Accounting Document's line Item text (SGTXT).
Do need some answers?
Regards

Similar Messages

User exits for payroll PCPO0001- EXIT_RPCIPE00_002 not working

We have activated User exit PCPO0001- EXIT_RPCIPE00_002, requirement was to set the line item text SGTXT of the subsequent Accounting document, but there seem to be no activity happening for it (assigned breakpoints in the exit codes but transaction PCP0 does not stop at the breakpoint).
I have created the Include program and the actviated the Exit and the Project from SMOD and I think I have followed all the necessary steps.
Is there anything I am missing, are there any Business Transaction Events that we can use.
Would be greatful for your reply.
Regards

Thanks for your reply
We did tried to apply breakpoints on EXIT_RPCIPE00_001 but it did not stop at that also, although we haven't implemented EXIT_RPCIPE00_01's INCLUDE program does that makes any difference ?
Is there any other way we can run our code during payrol's posting to accounting?
Our scenartio is that we need to add some Text from the Payroll information into the subsequent Accounting Document's line Item text (SGTXT).
Do need some answers?
Regards

User Exit MEFLD004 does not work in ME21

Hello,
    I want to modify the delivery date of a purchase order and I have seen that enhancement MEFLD004 is used to do that.
   I have created a project in CMOD, included the enhancement in the project, created the inckude ZXM06U54 but the system does not use the code.
   I put a breakpoint and the system does not stop.
    Any idea about what I am doing wrong?
    Do I have to customize something?
Thank you,

For ME21 you can use ZXM06U43 EXIT_SAPMM06E_012 or ZXM06U44 -EXIT_SAPMM06E_013.

User exit (PBO) does not work for IT0107 (Planned working time Belgium)

Hello,
I have written a simple code in program ZXPADU01 in order to default a field of IT0107 (part of IT0007 for Belgium). However, my field is not defaulted to the correct value.
The problem seems to be a
CLEAR P0107
statement in module "default" of dynpro MP010700 (screen 0100):
if psyst-ioper = insert and PSYST-IINIT = YES.          "XEOPH0K010351
    clear p0107.
    SELECT SINGLE * FROM T5B9G WHERE PERSG = P0001-PERSG
                               AND   PERSK = P0001-PERSK.
    IF SY-SUBRC NE 0.
      CLEAR T5B9G.
    ENDIF.
    IF p0107-BESTE IS INITIAL.      "RIB12Jun01
      PERFORM READ_BESTE USING p0107-BESTE.
      IF p0107-BESTE EQ SPACE OR 549BRC NE 0.
        p0107-BESTE = T5B9G-BESTE.
      ENDIF.
    ENDIF.                          "RIB12Jun01
    IF p0107-BERGM IS INITIAL.      "RIB12Jun01
      PERFORM READ_BERGM USING p0107-BERGM.
      IF p0107-BERGM EQ SPACE OR 549BRC NE 0.
        p0107-BERGM = T5B9G-BERGM.
      ENDIF.
    ENDIF.                          "RIB12Jun01
    IF p0107-BEREG IS INITIAL.      "RIB12Jun01
      PERFORM READ_BEREG USING p0107-BEREG.
      IF p0107-BEREG EQ SPACE OR 549BRC NE 0.
        p0107-BEREG = T5B9G-BEREG.
      ENDIF.
    ENDIF.                          "RIB12Jun01
*   Set defaults from features
    perform set_DefbyFeat using    p0007
                                psyst-ioper
                                psyst-iinit
                       CHANGING p0107.
endif.
Prior to the clear statement, table p0107 contains my default values, but the statement clears those values...
Any idea how to solve this?
Many thanks in advance!

Problem is solved with OSS note 1376481.

Transaction SE16: Field selection (User-Specific Settings) is NOT working for ALL tables

Hi Guru’s,
I have an issue in Transaction SE16, Field selection (User-Specific Settings) is NOT working in Tables (ALL tables).
Following is the screenshot attached for your kind reference,
That is in the initial screen of transaction SE16 if I choose Filed Name or Filed Label only the technical details (Field Names) are appearing and not the descriptions like Client, Purchasing Doc, and Company Code Doc. Category Document Type etc…
Right now I am using ECC6 and EHP7 SAP system.
Please help me to resolve this issue by implementing any OSS note or User Role creations or any technical changes required in system.
Hope the requirement is clear and in case need any clarification please revert back.
NOTE: Right now in Development System we don’t have any successful user to compare the settings.
Regards,
Kumar.S

Thanks Patra.
Even I searched in SAP portal and couldn't able to find the relevant OSS note.
Following is my BASIS team response,
"Only you can view Table Field values from higher release"
Can you suggest / guide on this comment as well.
Looking forward to your speedy response.
Regards,
Kumar.S

When bapi perform, user exit perform or not

Hi,
TCODE VA01,
i am going to use BAPI(SD_SALESDOCUMENT_CREATE) in order to create or change sales order .
but there is user exit on VA01, so i want to know if user-exit execute or not when i use BAPI on abap code.
thanks
venjamin.

Hi,
As far as i remember bapi will execute the user exit as once i tried to call the bapi in the user exit and in turn the bapi called back the user exit again. at that i used the same said bapi "SD_SALES_DOCUMENT_CREATE". and hence i changed my code accordingly
Regards
Satya

User exit in VA01 not triggering on change of custom field

Hello Guys,
We have custom field in SO item (VBAP) for which screen 8459 of SAPMV45A has been enhanced. Now, on the change of the custom field, user exit USEREXIT_MOVE_FIELD_TO_ME_REQ is not getting triggered.
Requirement is to change Purchase Requistion item (setting value of a EBAN field to custom field from 8459 screen) when a SO is created/changed.
Can someone please help!
Regards,
Ashish
Edited by: Ashish Kshatriya on Nov 4, 2009 8:00 PM

Hi
U can also to try to insert a new MODULE in the PAI of screen-exit where u call the user-exit USEREXIT_MOVE_FIELD_TO_ME_REQ or where u fill the header line of table EBAN just as what that exit does.
U should remember the screen-exit is "yours", so u can insert all module u need, just only save them in the following include:
- MV45AOZZ (PBO module)
- MV45AIZZ (PAI module)
Max

FRM-40800: User exit FND does not exist.

Situation:
I use Windows XP client - for development
Forms [32 Bit] Version 6.0.8.28.0 (Production)
The APPS server is on the Linux (RedHat):
Oracle9i Enterprise Edition Release 9.2.0.6.0 - Production
Apps version: 11.5.10.2
What I dis:
- installed Oracle Forms on Windows XP
- loaded JTFGRDMD.fmb in Forms with APPSTAND.fmb, FNDSCSGN.fmb
- loaded loaded all the PL/SQL libraries and recompile them for Windows
When I run JTFGRDMD I receive no compilation error but when the form run, I receive "FRM-40800: User exit FND does not exist.".
Does anybody have an ideea why I get this error ?
Thanks, Paul
Note: I tried to find information on Metalink and other threads, but nothing was good for me.

Hi,
Hussein, I agree with you. However I need to do a customization on the form and test it (on Windows) before deloying it to the apps server(on Linux).Do the customization at the client side, make sure the forms compile and run successfully, then copy the fmb file to the server and compile it. By doing this, you should be able to run the form from the application.
Under Forms (on Windows) I connect using apps/apps.When you compile the form on the server side, you will have also to provide the apps username/password, so the concept is the same. Do you still have an issue when accessing the form after compiling it on the server? If yes, then obtain the FRD file and post the contents of the file here (search the forum for FRD 11i).
Regards,
Hussein

LOCK THE USER AFTER X ATTEMPTS --NOT WORKING?

LOCK THE USER AFTER X ATTEMPTS --NOT WORKING
OpenSSO -->Configuration-->Authentication -->Core -->Login Failure Lockout Count:( 3 ) --> Warn User After N Failures: ( 4)--> Email Address to Send Lockout Notification: --> [[email protected]|mailto:[email protected]]
I tried above step but failed to achieve LOCKING the ACCOUNT...
Could some one please help me...

This only works if you use the LDAP auth module.

In Editable ALV the BACK/CANCEL/EXIT buttons are not working?

Hello,
I wrote a editable FM based ALV, working fine that when user changes the data and press SAVE button, values are transfering into prog. But, i need to put a validation that, if user changes the values and press BACK/CANCEL/EXIT button, i need to popup the message that "Do you want to save changes", my PF-STATUS is good(because, SAVE is working).
But, its not working that when user done changes and press BACK button (forgot to press SAVE button), system taking me to selection screen/screen 0!! I my code is as below,
FORM pick USING v_ucomm TYPE syucomm
 it_selfield TYPE slis_selfield.
DATA: v_answer TYPE char1.
READ TABLE it_z_tbl INDEX it_selfield-tabindex
 INTO w_z_tbl.
CASE v_ucomm.
 WHEN '&IC1'.
 " working fine this functionality
 ELSE.
 MESSAGE i000 WITH 'Double click on key field'.
 ENDIF.
 WHEN 'SAVE'.
 " working fine this functionality
 WHEN BACK' " OR 'CANCEL' OR 'EXIT'.
 PERFORM popup_for_user_decision CHANGING v_answer.
 CHECK v_answer = '1'.
 PERFORM now_update.
ENDCASE.
ENDFORM.
when i put the break point on the first line of this piece of code, its not stopping on pressing BACK/CANCEL/EXIT buttons!! (its stoppig for SAVE press or double click)
Its stopping at this point,
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'.
EXPORTING
i_callback_user_command = 'PICK'
IMPORTING
EXCEPTIONS
IF sy-subrc <> 0 =================> its stopping at this point!
ENDIF.
Pls. let me know why system is not recognising that i hv a PICK form (SAVE and Double clicks are working fine)?
Thank you

Hi,
Actually BACK is standard user command so it is not stopping and going to selection screen.
Give some other use command like 'BCK' and try....

Search help exit for CSH_T003 not working in FB60

Hi. We need to restrict document types per transaction code.
I know we can use authorisations but it would look nicer to actually restrict the list available, so the user can only choose a valid one, rather than choose any but then be told of authorisation problems.
I put a user exit on the collective search help CSH_T003 and also on the individual H_T003 and set a break point right at the start of the user exit, but it does not break in transaction FB60.
Does anyone know if it is possible to use a search help exit in transaction FB60? If it is possible what am I doing wrong?
Thanks a lot for your help.
Regards,
Dave.

Hi ,
If you are looking to retrict a specific document type for FB60. You can do so, by customizinng "a/c payable & receivable> Busi Trans > Outgoing invoices/Credit memo>Outgoing invoices/Credit memo enjoy.
Then in Fb60, go to "editing option" and hide the doc type under "Document type option". This will only work if you want to use a specific doc type for FB60.
Thanks
Ron
Edited by: Ron on Dec 2, 2009 8:45 PM

User exit for ME21N (Not functional or customer exit)

Hi Guys,
I want to get a user exit for PO as my requirement is to call custom screen before the PO is getting saved.
I have the functional exits and badi's list which will not fulfill my requirement as because on my custom screen i have cancel button.
On clicking the control needs to come back to the me21n second screen with the data entered with out order getting created.
The screen number for the second screen in ME21N is 14.
if i call screen 14 it will work in a user exit where as in customer exit(functional exit) we have limitations with the exporting and importing as so the screen number will not be recognised.
I am able to do the same calling of cust screen in Sales order creation and is sucessfull, the same should happen with PO also.
Probably if the user exit triggers at the time of syntax check i can achive my requirement rather than at save as the call back to the screen will not harm and database commits will not take place.
I also tried with all most of the enahancement points but the call screen statement is not working at any point of time which worked with Sales order exits. So i tried with making the validation fail but still by that time the PO number is getting generated and so if i try to cancel the PO before save and trying to get PO in edit mode but the sequence number is getting missed by by 1.
Please help.
Regards,
Amar.
Edited by: amar srinivas on Feb 11, 2011 10:16 AM
Edited by: amar srinivas on Feb 14, 2011 4:56 PM

Hi,
You can try it this way.
Check badi ME_PROCESS_PO_CUST , method - CHECK.
This badi/method gets triggered when the "CHeck" button and "SAVE" button is pressed.
It consists of a changing parameter CH_FAILED . Pass X to it when cancel button is hit in your custom screen.
Donot use any commit in this method. Read the documentation before doing it.

ERS user exit, pass Delivery note(LFSNR) in MIGO to Reference(XBLNR)in MIRO

Hi Experts,
I need to assign Delivery Note(LFSNR) in MIGO, to field Reference(XBLNR) in MIRO. that means "Reference " field must contain the delivery note information instead of Invoice doc number.
how can i use component MRMH0001.where can i use?
i am new to user exits.
please help me. i need logic and steps.
Thanks in advance
Reward points will be given.
Srinu

hi
Overview
R/3 provides three "customization spots" that allow you to enhance FI/CO features without modifying the standard code. Although often collectively referred to as "user exits," two of the three have different names. SAP Enhancements are used to expand the standard functionality within SAP. Enhancements use function modules and are called from the standard SAP code. Each module in the system has a set of delivered enhancements that help companies expand the standard functionality where they need it. Enhancements were new in release 3.0.
The Open FI Interfaces or Business Transaction Events are also used to expand the standard functionality within SAP. These events are defined in the IMG. Business Transaction Events were new in release 4.0. They are not available for all modules and are not called on all integrated transactions into FI as of release 4.5B. This will change with each release and should be retested.
The older User Exits in FI/CO are "Z" programs that are defined in table T80D for client-dependent user exits, and in table T80I for client-independent user exits. These are also used to expand the standard functionality within the FI/CO modules. These User Exits have been available since the early releases of SAP. All of these FI/CO User Exits are listed in this document in the Configuring User Exits (Older). The list is included because these User Exits are not a part of the Enhancements or Business Transaction Events and do not have an Info System for searching.
Benefits
Standard SAP functionality can be enhanced without modification to the standard code.
Upgrades do not erase the functionality and it does not have to be re-transported or re-entered into the system. The enhancements should be thoroughly tested when upgrading to ensure the system will still work as implemented.
Configuring SAP Enhancements
Basic Steps in Configuring an Enhancement
Find the appropriate Enhancement.
Enter the ABAP code in the "Z" program within the function module.
Create a project.
Add the Enhancement to the project.
Activate the project.
Example Business Scenario for Enhancements
Company A has a requirement to validate all customer master records created with a U.S. address. The U.S. entity reports on the industry field on the customer master. This is only a U.S. requirement and should not be required for the other countries, so the field status would not work. To accomplish this requirement, Company A will need to set up an Enhancement for the customer master transaction. The necessary steps are detailed below with screenprints. This example was configured in a 4.6C system.
to find the suitable exit for ur requirements check the following program
Hi
Find the available exits with the following program:::
*& Report ZFINDUSEREXIT
report zfinduserexit.
tables : tstc, tadir, modsapt, modact, trdir, tfdir, enlfdir.
tables : tstct.
data : jtab like tadir occurs 0 with header line.
data : field1(30).
data : v_devclass like tadir-devclass.
parameters : p_tcode like tstc-tcode obligatory.
select single * from tstc where tcode eq p_tcode.
if sy-subrc eq 0.
select single * from tadir where pgmid = 'R3TR'
and object = 'PROG'
and obj_name = tstc-pgmna.
move : tadir-devclass to v_devclass.
if sy-subrc ne 0.
select single * from trdir where name = tstc-pgmna.
if trdir-subc eq 'F'.
select single * from tfdir where pname = tstc-pgmna.
select single * from enlfdir where funcname =
tfdir-funcname.
select single * from tadir where pgmid = 'R3TR'
and object = 'FUGR'
and obj_name eq enlfdir-area.
move : tadir-devclass to v_devclass.
endif.
endif.
select * from tadir into table jtab
where pgmid = 'R3TR'
and object = 'SMOD'
and devclass = v_devclass.
select single * from tstct where sprsl eq sy-langu and
tcode eq p_tcode.
format color col_positive intensified off.
write:/(19) 'Transaction Code - ',
20(20) p_tcode,
45(50) tstct-ttext.
skip.
if not jtab[] is initial.
write:/(95) sy-uline.
format color col_heading intensified on.
write:/1 sy-vline,
2 'Exit Name',
21 sy-vline ,
22 'Description',
95 sy-vline.
write:/(95) sy-uline.
loop at jtab.
select single * from modsapt
where sprsl = sy-langu and
name = jtab-obj_name.
format color col_normal intensified off.
write:/1 sy-vline,
2 jtab-obj_name hotspot on,
21 sy-vline ,
22 modsapt-modtext,
95 sy-vline.
endloop.
write:/(95) sy-uline.
describe table jtab.
skip.
format color col_total intensified on.
write:/ 'No of Exits:' , sy-tfill.
else.
format color col_negative intensified on.
write:/(95) 'No User Exit exists'.
endif.
else.
format color col_negative intensified on.
write:/(95) 'Transaction Code Does Not Exist'.
endif.
at line-selection.
get cursor field field1.
check field1(4) eq 'JTAB'.
set parameter id 'MON' field sy-lisel+1(10).
write the code in the right form and check by keeping a break point
HI
To search for a badi, go to se 24 display class cl_exithandler.
double click on method get_instance, get a break point on case statement.
execute and start the required transaction in new session.
look for variable exit_name. It would show the available badi's.
also check the following links
User Exit
http://www.sap-img.com/abap/a-short-tutorial-on-user-exits.htm
http://www.sapgenie.com/abap/code/abap26.htm
http://www.sap-img.com/abap/what-is-user-exits.htm
http://wiki.ittoolbox.com/index.php/HOWTO:Implement_a_screen_exit_to_a_standard_SAP_transaction
http://www.easymarketplace.de/userexit.php
http://www.sap-img.com/abap/a-short-tutorial-on-user-exits.htm
http://www.sappoint.com/abap/userexit.pdfUser-Exit
http://www.planetsap.com/userexit_main_page.htm
http://www.sap-img.com/abap/a-short-tutorial-on-user-exits.htm
http://www.sap-img.com/abap/a-short-tutorial-on-user-exits.htm
http://www.sapgenie.com/abap/code/abap26.htm
http://www.sap-img.com/abap/what-is-user-exits.htm
http://wiki.ittoolbox.com/index.php/HOWTO:Implement_a_screen_exit_to_a_standard_SAP_transaction
http://www.easymarketplace.de/userexit.php
http://www.sap-img.com/abap/a-short-tutorial-on-user-exits.htm
http://www.sappoint.com/abap/userexit.pdfUser-Exit
Please do reward if useful
Regards
Dinesh

User exit code does not execute

I'm having a problem with User exit code that does not execute yet seems to be set up correctly.
The User exit is implemented as FM "EXIT_SAPLIPW1_001" in function group XQSM.
I've tried everything I know of with the CMOD and SMOD transactions, and I suspect some sort of transport error.
The only clue I can find in comparing the development system (which works) with the test system (which does not work) is that running "Extended Check" in SE80 on function group XQSM fails with the following error:
"The namespace of program SAPLXQSM has the setting "C" and cannot be tested."
Has anyone any idea what could have happened?

Let us try to retrace the steps.
1. You created a Z project in CMOD and assigned the enhancement IQSM0001 and the component EXIT_SAPLIPW1_001 and activated the same. This is there in the transport.
2. You double clicked on the include in the user exit and created it. You activated the code and included it in the same transport.
If you did the above steps, then your user exit should be active in your test system.
Can you please go to SE10, and list out the objects in your transport? You should see entries in there like below(not necessarily a complete list)
R3TR CMOD <your project name>
R3TR PROG ZXQSMU01
See if you created any of the objects as local objects.
Srinivas

Dynamic rooting (User Record) setting is not working in Nakisa OrgChart SP3

Dear All
The Dynamic rooting setting is not working in the Nakisa OrgChart SP3.
It is giving an error message - "Cannot find the root of your orgchart. The orgchart box may have been deleted or incorrectly specified, or no valid org structure can be found for the selected effective date. Please change the root of the chart or select another effective date."
We followed the same steps as given in the Admin guide of SP3 (P.no. 109 - shown below)
In Orgchart --> General Settings:
* Select the Org chart root value source.
User Record: Retrieves the record specified in the next step from the employee data element.
*Do one of the following to define the org chart root:
If User Record was selected in the previous step, select the field containing the ID of the required organizational object in the employee data element from the User record field drop-down list. For example, if you wish to root the org chart at the org unit of the logged-in user, select the field containing the org unit ID. Hence, we have selected the Org unit ID.
Note:
We had enabled single sign-on with logon tickets
Retained the standard settings in Security Settings --> Employee Source
Had provided full authorization to the roles
If we use the "OrgChart Root" option available in 'Orgchart root value source', the org structure gets displayed correctly from the root object defined.
As this is an standard functionality, Kindly guide us in resolving the issue.
Regards
Ravindra

Ravindra.
You don't have to and shouldn't always include the username and password parameters for the SAP Connection string. When you omit them it will use the user's login credentials.
Remember though that:
The SAPRoleMappingConnection will need them included in order to get the details for the user in the first place.
Without the username and password specified in a connection string you can't click the option to test the connection and result in a successful connection. Remember unable to connect does not necessarily equate to wrongly configured.
I've filtered the log file for errors and the following entries were flagged up:
26 Jun 2012 10:00:06 ERROR com.nakisa.Logger - com.nakisa.framework.utility.Files : deleteFile : java.io.IOException: Unable to delete file: E:\usr\sap\D15\J00\j2ee\cluster\apps\Nakisa\OrgChart\servlet_jsp\OrgChart\root\.system\Admin_Config\__000__THY_SAP_Live_RFC_01\AppResources\attr.txt
26 Jun 2012 13:13:52 ERROR com.nakisa.Logger - com.nakisa.framework.utility.Files : deleteFile : java.io.IOException: Unable to delete file: E:\usr\sap\D15\J00\j2ee\cluster\apps\Nakisa\OrgChart\servlet_jsp\OrgChart\root\.system\Admin_Config\__000__THY_SAP_Live_RFC_01\AppResources\attr.txt
26 Jun 2012 13:43:49 ERROR com.nakisa.Logger - java.lang.reflect.InvocationTargetException
26 Jun 2012 13:55:09 ERROR com.nakisa.Logger - com.nakisa.framework.utility.Files : deleteFile : java.io.IOException: Unable to delete file: E:\usr\sap\D15\J00\j2ee\cluster\apps\Nakisa\OrgChart\servlet_jsp\OrgChart\root\.system\Admin_Config\__000__THY_SAP_Live_RFC_01\AppResources\attr.txt
26 Jun 2012 14:32:03 ERROR com.nakisa.Logger - com.nakisa.framework.utility.Files : deleteFile : java.io.IOException: Unable to delete file: E:\usr\sap\D15\J00\j2ee\cluster\apps\Nakisa\OrgChart\servlet_jsp\OrgChart\root\.system\Admin_Config\__000__THY_SAP_Live_RFC_01\AppResources\attr.txt
26 Jun 2012 15:47:44 ERROR com.nakisa.Logger - BAPI_SAP_OTFProcessor_LinkedDataElement : The dataelement ( SAPPositionVacancyDataElement ) is not defined.
26 Jun 2012 15:47:44 ERROR com.nakisa.Logger - BAPI_SAP_OTFProcessor_LinkedDataElement : while trying to invoke the method com.nakisa.framework.data.Command.getType() of an object loaded from local variable 'p_cmd'
26 Jun 2012 15:47:44 ERROR com.nakisa.Logger - com.nakisa.framework.webelement.charting.data.ChartingData : createNodesFromData : Notes Error: NullPointerException
26 Jun 2012 15:47:44 ERROR com.nakisa.Logger - BAPI_SAP_OTFProcessor_LinkedDataElement : The dataelement ( SAPPositionVacancyDataElement ) is not defined.
26 Jun 2012 15:47:44 ERROR com.nakisa.Logger - BAPI_SAP_OTFProcessor_LinkedDataElement : while trying to invoke the method com.nakisa.framework.data.Command.getType() of an object loaded from local variable 'p_cmd'
26 Jun 2012 15:47:44 ERROR com.nakisa.Logger - com.nakisa.framework.webelement.charting.data.ChartingData : createNodesFromData : Notes Error: NullPointerException
26 Jun 2012 15:47:48 ERROR com.nakisa.Logger - com.nakisa.framework.webelement.charting.data.ChartingData : createNodesFromData : Notes Error: NullPointerException
26 Jun 2012 15:47:55 ERROR com.nakisa.Logger - BAPI_SAP_OTFProcessor_LinkedDataElement : The dataelement ( SAPPositionVacancyDataElement ) is not defined.
26 Jun 2012 15:47:55 ERROR com.nakisa.Logger - BAPI_SAP_OTFProcessor_LinkedDataElement : while trying to invoke the method com.nakisa.framework.data.Command.getType() of an object loaded from local variable 'p_cmd'
26 Jun 2012 15:47:55 ERROR com.nakisa.Logger - com.nakisa.framework.webelement.charting.data.ChartingData : createNodesFromData : Notes Error: NullPointerException
At the very least it looks like SAPPositionVacancyDataElement is missing and whilst the other errors around it are unfamiliar I wonder if it might be a good first step to see if you can track down the reference to and existence of this data element? That being said it looks like your last test occurred well over an hour after this (so you may have already resolved it) and resulted in nothing but information messages. If that is the case it might be worth "rolling" your log file or manually trimming it to the right time frame when posting it? Otherwise it can be misleading as people could flag up issues you have already resolved.
So assuming you haven't tried Luke's suggestion (which should only take a couple of minutes to do) I think you should go back and do so right away .
Regards,
Stephen.

User exit PCPO0001-EXIT_RPCIPE00_002 not working

Similar Messages

Maybe you are looking for