Upgrade from CF 8 to CF 10 Enterprise or Standard?

Trying to decide whether to go with CF10 Enterprise or Standard. If we were to develop our web applications using the additional features that only Enterprise provides and a client wants to host the site on their own server, would they have to be licensed for CF 10 Enterprise to be able to use the added features of our application or would they be able to run the cheaper CF 10 Standard version?

Similar Messages

Upgraded from server 2008 r2 to server 2012 r2 standard and nothing is working

I'm actually working on putting together a server using Server 2012 r2 as well, but we tested everything on it prior to launch and are now in the migration phase with only one application not cooperating: Exchange 2010...If you have another functional server running to keep DirSynch going with, would definitely suggest either upgrading something or downgrading another to allow for compatibility issues.We're going to keep using Exchange 2010 on the server it's installed on until we can upgrade it to 2013, otherwise if we moved it while everything else is moving, we will lose email altogether and end up with a lot of angry users...Certainly a lot of compatibility issues regarding server OSes I'm finding in my 1.5 years working here so far... I'm quickly learning the importance of researching these kinds of issues, So hey, welcome to...

Hi Everyone
I am desperate, I have upgraded a server to 2012 and it appears to stop DirSync from running. I can't uninstall the program because it doesn't launch the uninstall program from the control panel. I get an error message
windows.immersivecontrolpanel server execution error
This topic first appeared in the Spiceworks Community

Delta not working after upgrade from 3.5 to BI7.0

Hello All,
We have recently upgraded from BW3.5 to BI7.0 and the standard delta is not working now after the upgade. The name of the Extractor is 0CRM_SALES_ACT_1.
Did anyone come across this problem before or can anyone suggest the solution.
Thanks
Madhu

Hi Madhu,
I've experienced a similar problem with this extractor. I attempted to Initialize Delta with Data Transfer to no avail. The job ran for 12+ hours and stayed in "yellow" status (0 records extracted). The following steps worked for me:
1. Initialize Delta without Data Transfer
2. Run Delta Update
3. Run Full Update and Indicate Request as Repair Request
Worked like a champ, data load finished in less than 2 minutes.
Hopefully this will help.
Regards.
Jason

Search Service Application problems after upgrading from Foundation to Enterprise edition of SharePoint 2013

Hi all. I have been searching for days for a solution to a problem I am having with SP2013 Enterprise edition.
We recently upgraded from SP2013 Foundation to SP2013 Enterprise. After the upgrade, the search services are no longer working and we are receiving many application log entries indicating the following:
Application Server Administration job failed for service instance Microsoft.Office.Server.Search.Administration.SearchServiceInstance (ea2019ef-bb9e-4efe-85ee-5d2307406f31).
Reason: Access is denied. (Exception from HRESULT: 0x80070005 (E_ACCESSDENIED))
Technical Support Details:
System.UnauthorizedAccessException: Access is denied. (Exception from HRESULT: 0x80070005 (E_ACCESSDENIED))
at Microsoft.Office.Server.Search.Administration.SearchServiceInstance.Synchronize()
at Microsoft.Office.Server.Administration.ApplicationServerJob.ProvisionLocalSharedServiceInstances(Boolean isAdministrationServiceJob)
as well as:
Application Server Administration job failed for service instance Microsoft.Office.Server.Search.Administration.SearchServiceInstance (ea2019ef-bb9e-4efe-85ee-5d2307406f31).
Reason: The object you are trying to create already exists. Try again using a different name.
Technical Support Details:
System.Runtime.InteropServices.COMException (0x80040D02): The object you are trying to create already exists. Try again using a different name.
at Microsoft.Office.Server.Search.Administration.SearchServiceInstance.Synchronize()
at Microsoft.Office.Server.Administration.ApplicationServerJob.ProvisionLocalSharedServiceInstances(Boolean isAdministrationServiceJob)
I have tried to remove the search service application and recreate it, and even though the SharePoint Central Administration states that it was created successfully, I am still getting the same errors in the log. If I go to the Search Service Application
Search Administration page, the "System Status" shows the following message:
The search service is not able to connect to the machine that hosts the administration component. Verify that the administration component '0359af35-0982-4ede-8838-b1d390e915bf' in search application 'Search Service Application' is in a good state and
try again
Additionally, under the "Search Application Topology" section, it states "Unable to retrieve topology component health states. This may be because the admin component is not up and running" which I assume is normal if the admin is not
running.
Does anyone know how I can resolve this problem?
Thanks!

Hi Joaquin,
According to your description, the error occurred when you re-created the Search Service Application.
Based on the error message, I recommend to verify the things below:
   1. Check if the association between the Search Service Application proxy and the web application is configured.
Please go to Central Administration > Application Management > Configured service application associations > Click Default to see if the Search Service application is checked.
   2. Change the app pool for the Search Service Application to SharePoint Web Services Default in the properties of the Search Service Application.
Please go to Central Administration > Application Management > Manage service applications > Highlight the Search Service Application > Click Properties in the ribbon > Change
the two app pool to SharePoint Web Services Default: App Pool For Search Admin Web Service and Application Pool for Search Query and Site Settings Web Service.
    3. Run PS command to check if the search admin timer job is enabled: Get-SPTimerJob
job-application-server-admin-service | fl. If it is not enabled, use PS command to enabled it and then reset Internet Information Services: Enable-SPTimerJob job-application-server-admin-service.
Best regards.
Thanks
Victoria Xia
TechNet Community Support

After upgrade from 10.2.0.1 to 10.2.0.4 enterprise manager not working

after upgrade from 10.2.0.1 to 10.2.0.4
on windows enterprise manager is not working
Edited by: 830525 on Mar 24, 2012 9:44 AM

F:\Documents and Settings\hakem>emctl start dbconsole
Oracle Enterprise Manager 10g Database Control Release 10.2.0.4.0
Copyright (c) 1996, 2007 Oracle Corporation. All rights reserved.
https://M1C3:1158/em/console/aboutApplication
Starting Oracle Enterprise Manager 10g Database Control ...The OracleDBConsoleor
cl service is starting..........................................................
The OracleDBConsoleorcl service could not be started.
A service specific error occurred: 1.
More help is available by typing NET HELPMSG 3547.
F:\Documents and Settings\hakem>NET HELPMSG 3547
A service specific error occurred: ***.
EXPLANATION
A service-specific error occurred.
ACTION
Refer to the Help or documentation for that service to determine the problem.
that's what happen while trying to start db console

Upgrade from win 8.1 pro to win 8.1 enterprise without loosing all settings & programs

I would like to upgrade from win 8.1 pro to win 8.1 enterprise without loosing all my current settings and programs...
Is there a way?
Many thanks
Sepp
Thanks Sepp

Hi,
I think this design by default, you can refer to the link below for the statements:
Windows 8 and Windows 8.1 Upgrade Paths:
http://technet.microsoft.com/en-us/library/jj203353.aspx
Roger Lu
TechNet Community Support

Need Detailed instructions to install new hard drive & upgrade from Vista Home to Win7 Enterprise

Hi folks,
I have this laptop machine:
Lenovo 3000 G530 4446-23U Laptop Computer - Intel Pentium Dual-Core T3400, 2GB DDR2, 160GB HDD, DVDRW, 15.4" WXGA, Vista Home Basic
I need to install another hard drive and I also want to upgrade to Win7 Enterprise Edition while doing the rebuild.
I am very nervous about doing this as I upgraded a W530 from Win7 basic to Win7 Enterprise and ran into all kinds of drive issues. And I thought that would be about as straightforward as you could get, but it a far cry from that.
I do not want to have to go through that again - I still don't have everything working on it.
Can someone please tell me the precise steps to take to do this upgrade and how to ensure that I obtain ALL the drivers for EVERYTHING on the laptop and how to ensure that all those drivers are correct and exactly how to install them.
If there are other issues associated with upgrading from Vista Home to Win7 Enterprise, please advise of those and the solutions.
Thanks very much.....
Gus

hi gmercanti,
Welcome to the Lenovo Community.
The easiest way to upgrade Vista to Windows 7 is to run the Windows 7 Installer inside WIndows. Follow this guide for instructions. After upgrading, you will need to install the Windows 7 Drivers for Lenovo G530 4446 via http://support.lenovo.com.
Spoiler (Highlight to read)
Let me know if you get any errors.
Cheers
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
Follow @LenovoForums on Twitter!

BI 7.0: Source System upgrade from R/3 Enterprise to ECC 6.0

Background:
I am relatively new to BW team and will be going through my 1st source system upgrade.
We currently have BI 7.0 SPS 17 connected to source system R/3 Enterprise EP1.
We are upgrading to the source system to ECC 6.0.
In Development and QA Environments:
we will have access to both old (R/3 Enterpirse) and the new (ECC 6.0) source systems.
We have a opportunity to compare the BW Objects, data flow and data loading from
both source systems.
In Production, however, we will just upgrade over 3 days downtime.
One Question that comes to mind in this regard...
What sort of things, we should be checking for before and after upgrade in Dev/QA and in Prod environments and what tools are available that can help the analysis and validation process ?
Some of the suggestions that were given to me include following points.
Before Upgrade:
1 Check data, taking pre images of it for testing with post upgrade.
2. Perform proper analysis of Source system related BW objects.
- A complete listing of actively used Datasources,.. etc.
3. Make delta queues empty,
Make sure that all existing deltas are loaded into BW.The last request delta must not deliver any data and must be green in the monitor.
4. Stop Process chains from BI (remove from schedule) and collection runs from R/3 side
After Upgrade:
1 After the OLTP upgrade, refer to note 458305 and other notes that are relevant to the actual upgrade
(depending on the R/3 system release / R/3 plug-in to BI plug-in compatibility).
2. Check logical system connections. Transactions SMQS, RSMO and SM59, If no access, then we can use Program RSRFCPIN_NEW for RFC Test.
3. Check and/or Activate control parameters for data transfer. SBIW ---> General Settings --->
Maintain Control Parameters for Data Transfer
http://help.sap.com/saphelp_nw70/helpdata/EN/51/85d6cf842825469a51b9a666442339/frameset.htm
4. Check for Changes to extract structures in LBWE Customizing Cockpit
- OSS Notes 328181, 396647, 380078 and 762951
5. Check if all the required transfer structures are active. See OSS Note 324520 for mass activation.
7. Check if all Source system related BW Objects are active - Transfer rules, Communication rules, update rules,DTPs,..etc.
Below is a link for some useful programs in this regard.
https://www.sdn.sap.com/irj/scn/wiki?path=/pages/viewpage.action&pageid=35458
6. Test all important datasources using RSA3 and check for OLTP Datasources changes .
As soon as BW notices that the time stamp at the DataSource in the OLTP is newer than the one in the transfer structure, it requests replication of the DataSource and activation of the transfer structure. Transfer the relevant DataSources only if required, and transfer only the ones that have changed (RSA5 -> Delta).
7. Create Data flow objects (trnasfer rules, infopackages, trnasformations, DTPs) for the Replicate
new/changed datasources,if needed.
8. Check all CMOD enhancements.
If we are using a customer exit with the extractor in the OLTP, see Note 393492.
7. Check for unicode (all custom programs or Function Modules for DataSources)
5. Check all the queues in RSA7, start delta runs and test data consistency.
For delta problems:In the BW system, start the 'RSSM_OLTP_INIT_DELTA_UPDATE' program for the DataSource and the source (OLTP) system for which the init selections are then transferred from BW into the ROOSPRMSC and ROOSPRMSF tables in the source system so that the delta can continue.
9. Take back up of data posted during upgrade for contingency planing.
10. Run the entire set of process chains once if possible and let it pick up no data or the usual master data.
Since we have lot of experts in this forum, who have probably gone through such scenario many times, i wanted to request you to Please Please advise if i have stated anything incorrectly or if i am missing additional steps, OSS Notes, important details...

Thanks Rav for your detailed post and very helpful contribution by posting all the information you had regarding the upgrade.
We have similar scenario -
We are upgrading our source system from 4.7 to ECC 6.0. We have our BI system with BI 7.0 at support pack 19 (SAPKW70019).
Our strategy in ECC deployment ->
In development we copied our old DEV 4.7 system DXX to new ECC system DXY (new system ID).
In production we are going to use same system PRXX upgraded from 4.7 to ECC.
Now we are in testing phase of ECC with all interfaces like BI in Dev.
My questions are below ->
How can we change/transfer mapping of all our datasources in Dev BW system BID to new ECC dev system DXY (Eg. Logical system LOGDXY0040) from Old dev system DXX (Eg. Logical system LOGDXX0040). We donot want to create new datasources or change all transfer rules/Infosources for old BW3.x solutions on our BI.
Also in new ECC sourcesystem copy we see all datasources in Red in RSA7 transaction. Do we need to initialize again all the datasources from our BW BID system.
Is there any easy way for above scenario ?
Please let me know if you have any further helpful information during your ECC 6.0 upgrade connecting to BI 7.0 system.
I have found some other links which have some pieces of information regarding the topic -
Upgrade R/3 4.6C to ECC 6.0 already in BI 7.0
http://sap.ittoolbox.com/groups/technical-functional/sap-bw/sap-r3-migration-and-sap-bw-version-1744205
BI 7.0: Source System upgrade from R/3 Enterprise to ECC 6.0
Re: ECC 6.0 Upgrade
Re: Impact of ECC 6.0 upgrade on BI/BW Environment.
ECC 5.0 to ECC 6.0 upgrade
Thanks
Prasanth

Considering upgrading from CF8 up to CF11... notice in the CF11 support matrix that Sybase Adaptive Server Enterprise 15.0, 15.5 is not supported. While we primarily connect to Oracle DB, we do need to connect to Sybase DBs periodically. Is the plan to

Considering upgrading from CF8 up to CF11... notice in the CF11 support matrix that Sybase Adaptive Server Enterprise 15.0, 15.5 is not supported. While we primarily connect to Oracle DB, we do need to connect to Sybase DBs periodically.
Is the plan for CF11 to support Sybase again in the near future?

Did you ever get a response? I'm merely trying to connect to a Sybase database - and it gives me a java.sql.SQLException:null error - with no other information.
I'm running the server on Ubuntu 14.x, 64bit.
Thanks.

Upgrading from Oracle 10G standard edition to Oracle 10G enterprise edition

Hi
I want to upgrade from Oracle 10G standard edition to Oracle 10G enterprise edition. Is there any script provided by oracle which I can run on existing Oracle 10G standard edition to upgrade to enterprise edition after completing the licensing formalities or do I need to install Oracle 10g Enterprise edition from scratch and then migrate my data.
Ramanbir S

You will not need to perform any data migration to upgrade to EE. The diffetence between standard en enerprise editions are the features offered. When you upgrade you can use the same set of files you used to install standard edition and just add the enterprise edition features you want to use in the 'Custom' section of the Universal Installer.

Upgrading from Crystal Enterprise 10 to Business Objects Enterprise 11

Here's the situation:
We decided to upgrade from Crystal Enterprise 10 on server A to Business Objects Enterprise 11 on server B. We went with the method of importing all the objects and users from Crystal Enterprise 10 to Business Objects Enterprise 11. The import also brought in all the DB connection settings that were set in Crystal Enterprise 10. I also brought over all the ODBC System DSNs so that those can be consisten with the old server.
The problem we are having is that the reports are failing due to the connections to the database. I thought importing the database connection settings from Crystal Enterprise 10 along with bringing over the ODBC System DSNs would not make this an issue but it hasn't.
I checked the server logs in SQL and it's telling me that it's trying to log into the server as NT AUTHORITY\ANONYMOUS LOGON. Shouldn't it try to log under whatever I define in the report's database settings or ODBC System DSNs?
These same reports work fine in Crystal Reports and Crystal Enterprise 10.
Edited by: Gingerbread Man on Feb 9, 2010 10:41 AM

go into the properties of the report and verify that the Database Login values are still set. I found that it doesn't always transfer those when doing the import.

Upgrading from Crystal Enterprise 10 to Business Objects XI R3

Hi Guys,
I am upgrading from Crystal Enterprise 10 to Business Objects XI R3. The server which have Crystal Enterprise 10 is not on the network, please let me know to copy CMS database from CRE10 (Not on the network) to BOXIR3.
Burhan
Thanks

you will need access to the CMS DB and FRS from CE10 in order to migrate to XI 3.x, typically this is accomplished via network. If you can restore them to the same computer a side by side (install CE10 and XI 3.x on the same server) may work as well.
Regards,
Tim

Database Upgrade from 10.2.0.3 standard edition to 10.2.0.4 enterprise

Hi Guys,
We are running oracle standard edition 10.2.0.3 in solaris 10 having size of 1TB. We would like to upgrade this database/database server to 10.2.0.4 enterprise edition.
I am planning as below:-
1) upgrade 10.2.0.3 standard edition to 10.2.0.3 enterprise edition first.
2). upgrade it to 10.2.0.4 enterprise edition.
can anybody suggest me if its a best way ?
or
1). uninstall the standard editiont.
2). install the 10.2.0.4 enterprise edition
3). create a database in enterprise edition
4). import the data of standard edition.
Regards,
Pradeep

We are running oracle standard edition 10.2.0.3 in solaris 10 having size of 1TB. We would like to upgrade this database/database server to 10.2.0.4 enterprise edition.
I am planning as below:-
1) upgrade 10.2.0.3 standard edition to 10.2.0.3 enterprise edition first.
2). upgrade it to 10.2.0.4 enterprise edition.
can anybody suggest me if its a best way ?
or
1). uninstall the standard editiont.
2). install the 10.2.0.4 enterprise edition
3). create a database in enterprise edition
4). import the data of standard edition.
As you are using export/import to migrate database to 10.2.0.4. enterprise edition.
So there is no need to upgrade 10.2.0.3 standard edition.
1. So take export from 10.2.0.3 standard edition.
2. install the 10.2.0.4 enterprise edition and Create new database in 10.2.0.4 enterprise edition
3. import
4. Drop old database after taking backup. Uninstall 10.2.0.3 standard edition
Regards
Rajesh

Upgrading from Oracle 9i Standard edition to Enterprise.

I want to upgrade my database from oracle 9i(9.2.0.6) Standard edition to Enterprise edition.
Please suggest me as to what is the best suitable method
I was thinking of installing EE directly on Standard edition so that all the things remain intact is it possible?
Also if not then can backup and restore be used?
Thanks in advance

hi.
right now i have standard edition already installed as i said earlier. I want to upgrade from SE to EE because of using advance features like partitioning. DB size is 40 GB.
I know exp/imp would take a lot of time that's why I thought it is not a viable path.
regards,
pranav

Upgrading from 4.6C to Enterprise 4.70

Looking for high level documentation / presentation with regard to functionality / pitfalls when upgrading from 4.6C to Enterprise 4.7 which can be used to demonstrate to my client.

Hi Terence,
Pl check this <a href="https://websmp201.sap-ag.de/upgrade">OSS Link</a>
<a href="http://www.thespot4sap.com/upgrade_guide_v2.pdf">Upgrade Guide</a>
Regards,
Suresh Datti
P.S. PL reward points if the answer is helpful

Upgrade from CF 8 to CF 10 Enterprise or Standard?

Similar Messages

Maybe you are looking for