Upgrade from SP10 to SP17

Hi Experts,
We are on Netweaver 2004s SP10 portal, now wants to upgrade to SP17.
My question is can directly go from SP10 to SP17 or do we need any patch upgrade in between?
Thanks in advance.
Regards
Sunil

Patch w/ SP17 directly. No need for in-between patches. SP11-16 patches should be included in SP17.
Could take a while to patch though.
goodluck.
Regards,
Jan

Similar Messages

  • Error after SPS upgrade from SP10 to SP12

    Hi Friends,
    Recently we have done SOLMAN 7.1 sp upgrade from sp10 to sp12.
    Now I want to perform configuration activities in SOLMAN_SETUP.
    But when I am trying to do SYSTEM PREPARATION, I am facing error in first step(Maintain Users).
    "Error: Number of elements in the collection of node COMPONENT CONTROLLER.1.NAMESPACES violates the carnality".
    Kindly suggest me how to clear this above error and proceed further. Further please let me know as a SOLUTION MANAGER consultant what are the steps I need to perform post SP upgrade. I am not BASIS guy. So please let me know what are the activities which need to be performed by BASIS guy and SOLMAN guy
    Please find the attached screen shot for the error screen.
    Thanks & Regards,
    Solman Starter

    Go the transaction STMS, if a window appears when you start the transaction that's mean it is not configured.
    Only in this case :
    1.     Logon on to client 000  with DDIC.
    2.     Execute transaction SE06
    3.     Select the Database Copy or migration option
    4.     Press the Post-installation Processing button.
    5.     When prompted Do you want to re-install the CTS? Press the Yes button
    6.     When prompted for the Source System of Database Copy?, make sure that the <SID> of the production system is selected.  Press the checkmark button to continue.
    7.     When prompted Change originals from PRD to QUA?, press the Yes button
    8.     When prompted Delete TMS Configuration?, press the Yes button
    9.     When prompted Delete old TMS configuration?, press the Yes button
    10.     When prompted Delete Old Versions of transport routes?, press the No button
    Concerning the initial problem, i found this note :
    http://service.sap.com/sap/support/notes/2025884

  • Missing collaboration content upon upgrade from sp16 to sp17

    Hi,
    I upgraded the Netweaver 2004 installation from SP16 to SP17.
    We had created some collaboration rooms.
    People had uploaded documents to these collaboration rooms.
    The problem is after the upgrade, all the documents that had been uploaded to the rooms have disappeared. Has anybody faced a similar problem.
    Thank You for your help.
    Sumit.

    Hi,
    You need to transfer uncar files to EPSin directory then go to SPAM -> Support packages->Load Packages-> from front end.
    Then click all support packages and display. After that you can find support package of each component as yellow marked. Select any one of them and check the dependencies.
    If the dependencies are OK then select Queue button. Then click Import queue as Track sysmbol.
    After importing the status will be yellow so you need to go to Support Package button again and click Confirm. Tha Status will become Green.
    Like that way you need to do for each component.
    Regards,
    Sukripa

  • Upgrade from sp12 to sp17 in PI 7.0.

    hi,
    right now we have PI 7.0 with SP12. we are planning to upgrade the server from SP12 to SP 17. could you please let us know the technical ricks and befinits in SP17.
    a quick response would be appreciated.
    thanks and regards,
    KRUSHI.

    Hi,
    are you sure with PI 7.0 sp 12 or is it maybe XI 3.0 sp 12?
    PI 7.0 sp 12 equates to XI 3.0 sp 20.
    I am not sure if there exists sp 17 for PI 7.0, at least the release notes are only up to PI 7.0 sp 13:
    http://help.sap.com/saphelp_nw04/helpdata/en/c9/9844428e9cbe30e10000000a155106/frameset.htm
    Regards
    Patrick

  • Error occured when upgrading  PI (7.0) system  from SP10 to SP 20.

    We have upgrade our PI (7.0) system  from SP10 to SP 20.
    Here the proxy is used to update the database.
    Itu2019s failing at the synchronous proxy when XI is sending data to Proxy.
    Problem still exists even after regenerating the proxy.
    The following problem is faced
    The request  XML is like
    <?xml version="1.0" encoding="utf-8" ?><ns1:MT_PROCESS_INSTANCE_CREATE
    xmlns:ns1="http://spc_processes/generic"><OBJECT_TYPE>P01</OBJECT_TYPE><OBJECT_ID>4B7B87708C
    770176E10080000sa</OBJECT_ID><LANGUAGE>EN</LANGUAGE><DESCRIPTION>20100218-001 : xxxx
    bbb</DESCRIPTION><STATUS>01</STATUS><TYPE>2</TYPE><REQUEST_ID>200-001</REQUEST_ID><OBJ
    ECT_KEYTYPE>LASTNAME</OBJECT_KEYTYPE><OBJECT_KEYVALUE>zzzzzz</OBJECT_KEYVALUE><LAST_STEP_STATU
    S>00</LAST_STEP_STATUS></ns1:MT_PROCESS_INSTANCE_CREATE>
    And the response XML is
    <?xml version="1.0" encoding="UTF-8" standalone="yes" ?><!-- Inbound Message --> <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="1"><SAP:Category>XIProxy</SAP:Category><SAP:Code area="ABAP">PARSE_APPLICATION_DATA</SAP:Code><SAP:P1>Request Message</SAP:P1>
    <SAP:P2>CX_ST_MATCH_ELEMENT</SAP:P2>
    <SAP:P3>/1SAI/TXS00000000000000000036 Line 289</SAP:P3>
    <SAP:P4>System expected the element '{http://spc_view_db/generic}MT_PROCESS_INSTANCE' XML Bytepos.: 112  XML Path: ns1:MT_PROCESS_INSTANCE_CREATE(1)</SAP:P4>
    <SAP:AdditionalText/>
    <SAP:ApplicationFaultMessage namespace=""/>
    <SAP:Stack>Error during XML =&gt; ABAP conversion: Request Message; CX_ST_MATCH_ELEMENT in /1SAI/TXS00000000000000000036 Line 289 System expected the element '{http://spc_view_db/generic}MT_PROCESS_INSTANCE' XML Bytepos.: 112  XML Path: ns1:MT_PROCESS_INSTANCE_CREATE(1)
    System expected the element '{http://spc_view_db/generic}MT_PROCESS_INSTANCE'
    </SAP:Stack><SAP:Retry>M</SAP:Retry></SAP:Error>
    I'm a bit new to PI.Please explain in detail.
    Thanks in advance!!

    Hello
    Try the following workaround:
    Go to trx: Sproxset:                                  
    - Name: ST_USE_LAX_ON                                 
    - Value: X                                            
    - User: <Empty >                                      
    - Inactive: <Empty >     
    Check the notes below:
    #1169688 New Features in Release 7.0 (SP14)
    #1162160 CX_ST_MATCH_ELEMENT in XML INBOUND processing
    Regards
    Mark

  • Auto update - upgrade from BPC 7.0 MS SP9 to SP10.

    Hi,
    I have upgraded from BPC 7.0 MS SP9 to SP10.
    I would like to execute auto update programm. I have the message ' update is OK' but the system does nothing
    NB : I closed all Office programms And internet Explorer before running this update programm.
    Do anyone else experience the same issue?
    Best regards
    Bastien

    Hi,
    Do have Vista or Windows 7 on your computer? If yes, then UAC may interfere. You may need to disable UAC or update client manually. To obtain client software installers please download them from your server as instructed here:
    Need details about BPC 7.5 MS Client Installation

  • Upgrade from XI 3.0 (SP17) to PI 7.0 (SP12): Best Practices

    Hi mates,
    I've a few questions regarding the upgrade to PI 7.0.
    If the upgrade process is done in phased manner i.e. DEV, QA, PRD in that order over a period of 3 weeks,
    How do we handle the transports from DEV->QA->PRD when DEV is 7.0 and QA & PRD on 3.0 using CMS?
    Will there be inconsistencies when transports are moved, because a few features could be different or internal representation of IR/ID content could be different in 3.0 & 7.0?
    What are the upgrade best practices, phased manner or all at a time?
    Please throw more light on this. I appreciate the inputs from people who've helped clients upgrade from 3.0 to 7.0. Any SAP documentation related to this?
    I looked at the thread Transports from XI 3.0 to PI 7.0 but the answert is very generic, w/o any supporting documentation and real time experience.
    thx in adv
    praveen

    <i>> Hi mates,
    >
    > I've a few questions regarding the upgrade to PI
    > 7.0.
    >
    > If the upgrade process is done in phased manner i.e.
    > DEV, QA, PRD in that order over a period of 3 weeks,
    > How do we handle the transports from DEV->QA->PRD
    > when DEV is 7.0 and QA & PRD on 3.0 using CMS?</i>
    Im my experience you should implement a change freeze for this period, with the exception of emergency transports - and these have to be justified.
    <i>> Will there be inconsistencies when transports are
    > moved, because a few features could be different or
    > internal representation of IR/ID content could be
    > different in 3.0 & 7.0?</i>
    Full regression testing will be needed on each interface.  If you implement a change freeze this process becomes easier
    <i>>
    > What are the upgrade best practices, phased manner or
    > all at a time?</i>
    Allow plenty of resources to fully test every interface, as you would with any upgrade.
    You could also take the time to implement the new <a href="https://www.sdn.sap.comhttp://www.sdn.sap.comhttp://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/80bbbd55-5004-2a10-f181-8bb096923cb6">CTS+</a> for this new version to avoid any further transport issues (PI7.0 SP12 +).  A new method for a new system!
    Also, how is your SLD set up for XI?  This can have an impact.

  • Upgrade from SP09 to SP14

    Dear Experts,
    Since I have ERP 2005 SR2 installed the EP7 has SP09 and I am finding some problem with the installation of DI and other issues. So like to upgrade to SP14. I have downloaded the Support Pack stack from market place and was comparing the components required to go ahead. I found few of the components which I downloaded and what I have from the system information. Few are mentioned below.
    JSPM                      7.00 SP12 (1000.7.00.12.0.20070507080400)      
    CORE-TOOLS      7.00 SP9 (1000.7.00.9.0.20060827014400)
    BASETABLES      7.00 SP9 (1000.7.00.9.0.20060827014300)
    JLOGVIEW      7.00 SP9 (1000.7.00.9.0.20060827014700)
    SAP-JEE                  7.00 SP9 (1000.7.00.9.0.20060827014500)
    SAP-JEECOR          7.00 SP9 (1000.7.00.9.1.20060913120000)
    ADSSAP                     7.00 SP9 (1000.7.00.9.0.20060827015200)
    CAF                     7.00 SP9 (1000.7.00.9.0.20060825071023)
    BI_MMR                     7.00 SP9 (1000.7.00.9.0.20060826182000)
    UMEADMIN      7.00 SP9 (1000.7.00.9.0.20060811133141)
    SAP_JTECHS      7.00 SP9 (1000.7.00.9.0.20060827014700)
    CAF-UM                      7.00 SP9 (1000.7.00.9.0.20060811133139)
    KM-KW_JIKS      7.00 SP9 (1000.7.00.9.0.20060827014900)
    LM-TOOLS      7.00 SP9 (1000.7.00.9.3.20061016113408)
    BI_UDI                     7.00 SP9 (1000.7.00.9.0.20060826185800)
    EP-WDC                     7.00 SP9 (1000.7.00.9.0.20060827063700)
    EPBC2                     7.00 SP9 (1000.7.00.9.0.20060827034600)
    EPBC                     7.00 SP9 (1000.7.00.9.2.20061026162900)
    EP-PSERV      7.00 SP9 (1000.7.00.9.0.20060827063800)
    WDEXTENSIONS      7.00 SP9 (1000.7.00.9.0.20060811133134)
    SAPPCUI_GP      600 SP13 (1000.600.0.13.0.20080516101947)
    IS-HER-CSS      600 SP6 (1000.600.0.6.0.20060831151934)
    SAP-EU                    7.00 SP9 (1000.7.00.9.0.20060811133132)
    CAF-KM                7.00 SP9 (1000.7.00.9.0.20060811133145)
    NET-PDK       7.00 SP9 (1000.7.00.9.0.20060827063700)
    RTC                      7.00 SP9 (1000.7.00.9.0.20060827105400)
    KMC-BC                      7.00 SP9 (1000.7.00.9.0.20060827081000)
    KMC-CM                      7.00 SP9 (1000.7.00.9.0.20060827100100)
    KMC-COLL      7.00 SP9 (1000.7.00.9.1.20061017073300)
    LM-PORTAL      7.00 SP9 (1000.7.00.9.0.20060807071043)
    RTC-STREAM      7.00 SP9 (1000.7.00.9.0.20060827105400)
    UWLJWF        7.00 SP9 (1000.7.00.9.0.20060827090500)
    SAP_ESS      600 SP10 (1000.600.0.10.10.20071130064320)
    SAP_ASR      600 SP6 (1000.600.0.6.0.20060920091843)
    SAP_PSS      600 SP6 (1000.600.0.6.0.20060901025040)
    SAP_MSS      600 SP6 (1000.600.0.6.0.20060831153355)
    Have not mentioned about the BP above, which I will update all till SP10 once I have done with SP14 of portal.  And the same with ESS/PSS/ASR/MSS I will upgrade till SP10( same as BP)
    Apart from the above list, the underlined are not yet downloaded and want to know from you experts, that is it okay with all those mentioned above to go ahead with Portal SP14 or some components still needed?
    Also I will take JSPM to SP14( now at SP12).
    Important: Do I have to update my ABAP patch before I start with Portal? At present have the followin levels
    SAP_BASIS SP10
    SAP_ABA  SP10
    PI_BASIS SP10
    SAP_BW SP09
    SP_HR SP15
    EA_HR SP15  and all others default.
    Any link/doc will be highly appreciated.
    I have gone through some of blog/threads and every where it is maintained that a backup. So backup of DB or whole system backup?
    Regards
    Prash

    Just forgot to mention that also the following 3 components are not yet downloaded.
    VCBASE              7.00 SP9 (1000.7.00.9.0.20060828094000)
    VCKITGP     7.00 SP9 (1000.7.00.9.0.20060828094000)
    VCKITXX     7.00 SP9 (1000.7.00.9.0.20060828094000)
    And regaring the BP do I need to download 1.0 SP10 or SP06 will do and only for BP_ERP5ESS and MSS will take it till SP10( same as SAP_ESS/MSS)
    BP_ERP5***     1.0 SP6 (1000.1.0.6.0.20060831150911)
    BP_ERP5BUA     1.0 SP6 (1000.1.0.6.0.20060831150930)
    BP_ERP5BUY     1.0 SP2 (1000.1.0.2.0.20051129013440)
    BP_ERP5COM     1.0 SP2 (1000.1.0.2.0.20051129015614)
    BP_ERP5DCO     1.0 SP2 (1000.1.0.2.0.20051129022003)
    BP_ERP5HRA     1.0 SP6 (1000.1.0.6.0.20060831151041)
    BP_ERP5INV     1.0 SP2 (1000.1.0.2.0.20051129035224)
    BP_ERP5MSS     1.0 SP6 (1000.1.0.6.0.20060901115659)
    BP_ERP5MTC     1.0 SP2 (1000.1.0.2.0.20051129043511)
    BP_ERP5PLA     1.0 SP2 (1000.1.0.2.0.20051129014121)
    BP_ERP5PRS     1.0 SP4 (1000.1.0.4.0.20060331022103)
    BP_ERP5PSS     1.0 SP6 (1000.1.0.6.0.20060831151737)
    BP_ERP5QIN     1.0 SP2 (1000.1.0.2.0.20051129021503)
    BP_ERP5SAL     1.0 SP2 (1000.1.0.2.0.20051129012342)
    BP_ERP5SUP     1.0 SP3 (1000.1.0.3.1.20060424231627)
    SAPPCUI_GP     600 SP13 (1000.600.0.13.0.20080516101947)

  • I upgraded from 3gs and want to use my old 3gs as an ipod. how can i update my new apple ID on the 3gs as it still shows a previous one that I had?

    I recently upgraded from 3Gs to Iphone4 and want to use my old 3Gs as an ipod. how can i update
    the user ID on the 3gs to a new one that I have as it is still showing a previous user ID?

    Settings>Store...tap the ID shown...sign out...sign back in with the ID you want to use.

  • Is it really possible to upgrade from a Treo 650 to a Treo 750?

    I am not a very happy customer at the moment, but any help would be greatly appreciated. I upgraded from my old Palm Tungsten to a Zire, then to a Cingular Treo 650, combining three devices into one. I have since discovered that the Treo 650 seems to have a faulty transmission mode, as I can rarely be clearly understood by whomever I call. Am on the second (or third, I have lost track) and continue to have the same problem. I get five bars of reception but can't be understood on the other end. A bit of a problem when one is trying to call 911. Am constantly told I am "breaking up". The repair shop says it "Can't duplicate the problem". OK, then I do not want to give up all the info I have stored in the fool thing, and the 750 seems to have a different system, so I thought I would try that. All the stuff I could find seemed to indicate it wouldn't be a problem to upgrade. When the 750 arrived, I tried to install the software from the CD on my Windows XP computer. No dice. Setup encounters an error and closes. Can't even look at the files, because setup tries to run any time I access the CD. From any drive.  Gave it to my girlfiend to check on her computer, and the CD seemed to run fine. Other CDs work just fine on my computer. Must be some kind of conflict, but what? Tried calling the AT&T number that suggested they could help with setup, and was first connected to the business center, they routed me to the laptop center, who routed me to the network center, who said they would have to bring in the Palm customer service and connected me to a Mac guy that dumped me back to a menu that took me to someone for whom English is a second language with whom I was trying to communicate over a very poor satellite connection. They made no sense anyway. telling me first that I couldn't have two desktops running (wrong, my girlfriend has my old Zire and the CD worked fine) and then insisting that the serial number on my device had to start with a P, when it clearly does not have any alpha characters in it. Gave up on that route of assistance. Managed to get the new ActiveSync installed from my girlfriends computer over the network. Great. Now let's get my 650 synced with Outlook (which I have not used at home) and see if we can move on. Nope. First I have to update Outlook 2000 from the old Win98 to my current XP. Find the old CD, and square that away. OK, now sync to Outlook. Nope. The sync program gives an error, saying it will only sync with Outlook 98, 2000, and XP(2002). Good grief. I have Outlook 2000, and the software apparently does not recognize it. If the Palm doesn't work, there is no reason for me to keep this phone, and I am very close to returning it and abandoning the Palm entirely when I upgrade to something that works, although I dread re-entering all that information.
    Post relates to: Treo 750 (AT&T)
    This question was solved.
    View Solution.

    Thanks for the feedback. Today I installed an Enterprise version of Office 2007 I purchased a while back, but had not yet installed. Microsoft presented a few challenges, but they were quickly resolved. I then downloaded the appropriate conduit from Palm, and synced the 650 with the handheld overwriting the computer. Then used Active Destop to sync the 750. Satisfied I had moved as much info as possible, I called AT&T and had them move the phone number to the new Treo.
    Bonus! When the guy at AT&T called me on the new phone to verify it, he said it sounded better than my landline.
    Sorry for the streaming paragraph. When it is late I tend to write like I think.
    Dave
    Post relates to: Treo 750 (AT&T)

  • I upgraded from iPhone 3GS to iPhone 6.  Everything converted fine until I deleted an app in error.  When I downloaded it from iTunes, my account is no longer recognized by the app's host servers.  Can I go back and re-sync one app from my old phone?

    I upgraded from iPhone 3GS to iPhone 6.  Everything converted fine.  Yesterday I deleted an app in error.  When I downloaded the software it from iTunes ( did this many times on the old 3GS), my account is no longer recognized by the app's host servers (Playtika), even though it did after the initial conversion.  Can I go back and re-sync just one app from my old phone?  

    Try deleting what is called the iPod Photo Cache. 
    http://support.apple.com/kb/TS1314

  • I have just downloaded the upgrade from Mountain Lion to Yosemite. In the process i am now unable to gain access to iTunes. The app on desktop no longer works and the install is not able to be opened.

    I Have downloaded the upgrade from Mountain Lion to Yosemite. In thee process of so doing I have lost access to iTunes.
    The app on desktop no longer opens the program and having downloaded and installed as per Apple instructions, can not make a connection.

    Hi, drjbuchanan.  
    Thank you for visiting Apple Support Communities.  
    Here are some troubleshooting steps that I would recommend going through when experiencing this issue.  
    iTunes: Troubleshooting issues with third-party iTunes plug-ins
    http://support.apple.com/en-us/ts3430
    Troubleshooting iTunes installation on Mac OS X
    http://support.apple.com/en-us/ht2311
    Cheers, 
    Jason H.  

  • Can't print from IE 8 after upgrading from Vista to Windows 7

    My laptop (HP Elitebook 8530w) uses two HP printers: Color LaserJet CP3525x (at work) and Deskjet 6940 (at home). Both printers are accessed across a local network.
    I recently upgraded from Vista Enterprise to Windows 7 Enterprise.
    Everything still prints fine (from Word, Adobe Reader, Windows Photo Viewer, etc.), except for IE 8! When I try to print a web page from IE, it prints only the page header, and otherwise the sheet is empty. This symptom occurs on both printers. (And of course this worked fine before the upgrade.)
    Any ideas? Thanks for any help.
    Jeff
    This question was solved.
    View Solution.

    (same poster)
    If anyone else is having this problem, I found the solution on another forum (http://social.answers.microsoft.com/Forums/en-US/InternetExplorer/thread/920588e5-ccc4-4e24-83d6-606...).
    Specifically, the following steps solved the problem:
    1. If it doesn't already exist, create a directory named "Low" in your directory "C:\Users\<your_user_name>\AppData\Local\Temp\".
    2. From a command prompt, issue this command:  ICACLS C:\Users\<your_user_name>\AppData\Local\Temp\Low /setintegritylevel (OI)(CI)low
    Jeff

  • Fields in read-only mode for BP transaction in upgrade from 4.72 to ECC6.0

    Hello,
    This is regarding the query for BP transaction in upgrade from 4.72 to ECC 6.0.
    While creating BP / Changing BP system is disabling the fields in compnay code & sales area option. There is a SAP not provided 907860; and specified that the proplem is because of the delta customizing.
    All the customization settings are as per the note. And the Synchronization Control is also activated. But still the fields are disabled only.
    I have checked the field settings also in Cross-Application-Components & Logistic-Genral.
    But these are not working for compnay code & sales area data.
    please let me know if anyone has faced this type of problem / found any solution on this.
    Best Regards,
    Shubhada

    SAP IMG  -> Cross Application Components -> Master Data Synchronization &#61664; Synchronization Control -> Synchronization Control -> Activate Synchronization options
    This setting allows you to activate synchronization of BP with R/3. Not maintaining the values may result in certain fields being read-only in BP.
    Suggested Values:
    Source Object: BP | Target Object: CUSTOMER | Active Indicator : X
    Source Object: BP | Target Object: VENDOR | Active Indicator : X
    Source Object: CUSTOMER | Target Object: BP | Active Indicator : X
    Source Object: VENDOR | Target Object: BP | Active Indicator : X
    Have you set all of the above settings??
    BHARATH

  • Error in Access VBA Application when upgrading from Acrobat 8.0 to 9.0

    Hello.
    The company that I work for recently upgraded from Adobe Acrobat 8.0 to 9.0 and I`m experiencing some problems with my Access 2003 VBA Application that extracts text from PDF-files and insert it into a table. I have tried adding references to Adobe 9.0 Type Library, but still no luck. Anyone having any ideas for a workaround? See attatched image for error-message. Any help will be greatly appreciated!
    Regards,
    Steffan

    Public Function lesPDF()
    'On Error Resume Next
    Dim MyDB As Database, EplanSet As DAO.Recordset, ResultSet As DAO.Recordset, SideSet As DAO.Recordset, TekstSet As DAO.Recordset
    Dim AcroApp As CAcroApp
    Dim AcroAVDoc As CAcroAVDoc
    Dim AcroPDDoc As CAcroPDDoc
    Dim AcroHiliteList As CAcroHiliteList
    Dim AcroTextSelect As CAcroPDTextSelect
    Dim PageNumber, PageContent, i, j
    Dim Ferdig As Boolean
    Dim StartPos, Length As Double
    Dim PartSyntax() As String
    Dim DocType() As String
    Dim Content, strFileName, Temp As String
    Dim k, Lengde As Integer
    Plant = Form_Autoexec.cmbPlant.Value
    Set AcroApp = CreateObject("AcroExch.App")
    Set AcroAVDoc = CreateObject("AcroExch.AVDoc")
    Set MyDB = DBEngine.Workspaces(0).Databases(0)
    EplanSet.MoveLast
    EplanSet.MoveFirst
    Do Until EplanSet.EOF
        strFileName = EplanSet!path & EplanSet!File
        If AcroAVDoc.Open(strFileName, vbNull) <> True Then
            Exit Function
        End If
        Set AcroAVDoc = AcroApp.GetActiveDoc
        Set AcroPDDoc = AcroAVDoc.GetPDDoc
    Here is some of the code, where the program stops is marked in red. This worked perfectly with Adobe 8.0. Thaks for any help or suggestions!

Maybe you are looking for

  • Calendar colors

    I feel like this is a stupid question, but I can't figure it out. When I use iCal on my computer, I have three event categories, and each has a color. When I sync it to iCal on my ipod, there are the same 3 event categories, but with the colors rever

  • HT201364 What is new about iOS 8.1.3?

    I discovered a new iOS update (iOS 8 8.1.3), what is new or what did they change in this new update?

  • Mac mini slow speed - with pauses

    My Mac Mini crashed and I had to reinstall. Now it runs partly very slow, even with pauses, where I have to wait for responses. Start-up takes long minutes. System profiling tools says HD activity reaches a max of 8MB/s. CPU workload looks far below

  • IC WebClient IBASE

    Does any one know which view I need to amend to extend the IBASE and Account Search. I've look at IBASEsearch and BUPAsearch in CRM_IC. Thanks in advance. Kini

  • Layouts issue

    Dears, I am facing an issue while trying to print preview any form on the system in arabic it appears in symbols on osx but when i try to do it on windows it appears normally, do i have to configure something on osx to solve this issue ?