Upgrade from sql Server 9.0 to sql Server 12.0

I am currently running SQLEXPRESS (SQL Server 9.0) It appears that there is a limit to the size of the database which I have exceeded. I want to restore a backup of my customers DB and am not allowed to do so. Appears to be a size issue,
the customer DB is over 5 GB.
Will I eliminate this size restriction using sql Server 12.0?
I don't see any references to upgrading sql Server 9.0 to sql Server 12.0, only references to a new installation. Can it be upgraded and how do I do that?

Hello,
Please read the following article.
http://www.mssqltips.com/sqlservertip/2941/upgrading-to-sql-server-2012-express
Hope this helps.
Regards,
Alberto Morillo
SQLCoffee.com

Similar Messages

SQL Server reporting services error "URl has already been reserved" while doing upgrade from SQL server 2008 R2 to SQL server 2012

"URl has already been reserved".
Reporting services for port 80 and 443 works fine both for reports and reportingserver on SQL server 2008 R2. But when I try to upgrade from SQL server 2008 R2 to 2012 this error pops up. How to make sure before upgrading regarding reporting services that
URL reserves and SSL are fine or how to fix reporting services are upgrade like repair install.
Thanks

Hi yashmitl,
In your case, please running the following command to check the current URL reservations on http.sys.
netsh http show urlacl
Then, please delete the URL reservation by executing the following command try to resolve the issue.
netsh http delete urlacl <url>
There is a similar issue, you can refer to it.
http://social.technet.microsoft.com/Forums/en-US/d5204dd3-e26d-4592-8ef0-a94005fc46a5/the-url-has-already-been-reserved?forum=sqlreportingservices
Hope this helps.
Regards,
Alisa Tang
Alisa Tang
TechNet Community Support

Upgrade from SQL Server 2005 to SQL Server Express 2014 Enterprise

I was just wondering if it is possible to upgrade from SQL Server 2005 to SQL Server Express or will I have to build the environment and then migrate the database?
Thanks for any help

Hi Lance_Romance,
As others’ posts, you don’t have to build new environment and then migrate databases between SQL Server instances, you can use the in-place upgrade strategy to upgrade from SQL Server 2005 to SQL Server 2014 .Please note that SQL Server 2005 SP4 is required
in this case.
Before upgrading , I recommend you to use
upgrade advisor, it can help to analyze your existing SQL Server deployment and inform you of issues that need to be addressed. In addition, please perform a full server backup prior to performing the in-place upgrade, which will be an important way
to revert your SQL Server to its previous state if the upgrade does not go as planned. For more details, please review this blog:
Upgrading to SQL Server 2014: A Dozen Things to Check.
Thanks,
Lydia Zhang

How to make upgrade from application server and not from central instance?

Hello SAP Gurus!
I have SAP ECC release 6.0, and I´m gonna make upgrade to enhancement package 6.06, do you know if Can I make upgrade from application server, but not from central instance?
Thanks.

Hi Victor,
Upgrade process has to execute from the server where message server is running.
So I guess it is not possible to initiate the SAP upgrade from application server.
Regards,
Deepak Kori

Upgrade from Windows Server 2012 Active Directory to Windows Server 2012 R2 Active Directory

We are currently running Windows Server 2012 Active Directory and would like to upgrade to Windows Server 2012 R2 AD. Is it OK to just do an in-place upgrade, or is it advisable to build new domain controllers on R2? Are there any guides or articles anyone
can recommend?

Hi Ginandtonic,
To upgrade DC(Domain Controller) from windows server 2012 to windows server 2012 r2, please refer to these articles:
Upgrade from windows Server 2012 to 2012 R2
Upgrade Active Directory from 2012 to 2012 R2
I hope this helps.
Best Regards,
Anna

Upgrade from Panther Server with Raid1

Trying to upgrade from Panther Server with software Raid1. Upgrade fails with "Could not prepare disk". I'm guessing it has to do with the RAID1? I need to upgrade and not do a clean install.
Could I upgrade to tiger server first?

Wow, Panther server. Ah the memories... Anyway, what you are running into is an issue with the actual Apple RAID software versions. If you run this command:
diskutil checkRaid
You should see in the result:
Apple RAID version: 1
That is your problem. Tiger and Leopard will only install on Apple RAID version 2 which was introduced in Tiger. But, all is not lost. Apple has provided a method to upgrade the RAID version without a break and a recreation. Again, using diskutil, run this command to see your options:
diskutil convertRaid
You will get:
Convert a 1.x RAID set (Mac OS 10.3 Panther or earlier) to a 2.x RAID set.
The filesystem must be mounted and resizeable (i.e. Journaled HFS+).
Ownership of the affected disk is required.
Example: diskutil convertRAID /Volumes/RAID
If the name of the volume is Data, then diskutil convertRaid /Volumes/Data should provide the fix you need.
Boot from your Leopard install media and then before attempting to install, open the Terminal and use the command above. Provided you formated as HFS+ journaled you will be fine.
*Make sure you have a backup!*
Oh, and if this fails, then run a diskutil list and hope that you did not install the OS 9 firewire drivers. If you did, then nuking and paving is likely your only option. In that case, I would suggest a clone, then a Raid break, then a creation of a new RAID set, then a restore, then an upgrade.
Again, make sure you back everything up. Be ready to revert back to your clone. Stop all services before upgrading. Export all users and groups. Just be safe. Panther to Leopard can be a tricky upgrade. If you are using MySQL, do a dump before attempting.
Hope this helps. Backup first. Backup many places.

Upgrading from SQL Server 2012 Standard to SQL Server 2014 Standard Failover Cluster

Goal: To upgrade my default instance from SQL Server 2012 to SQL Server 2014 in a failover cluster.
Given:
1) Operating System Windows 2012 R2
2) 2 Virtual Machines in a cluster with SQL Server as a Guest Cluster resource. The two VMS are called APPS08 and APPS09. They are our development environment that is setup similar to our production environment.
Problem: When running the SQL Server 2014 upgrade, I started on the VM that was not running the instance. I then moved onto upgrading on the node that was running the instance. As soon as the install attempt to failover the running instance
an install error occurred that it could not failover. After many install attempts I consistently received the error
The SQL Server Failover cluster instance name 'Dev01'
already exists as a cluster resource. Opening Failover cluster manager there is no record of a DEV01.
New Strategy: Create a SQLCluster called DEV07. At the end of the Install I get 'Resource for instance 'MSSQLSERVER' should not exists. Neither I nor my Windows 2012 guy understand what Resource the install may be referring to.
We do not see anything out of the ordinary.
Any suggestions as to what Resource may be seeing the default instance would be greatly appreciated.

Hi PSCSQLDBA,
As your description, you want to upgrade the default instance in SQL Server cluster.
>> 'SQL Server failover cluster instance name 'Dev01' already exists as cluster resource'
This error could occur when there is a previously used instance name which may not be removed completely.
To work around the issue, please use one of the ways below.
1. At command prompt, type Cluster res. This command will list you all the resources including orphan resources. To delete the orphan resource, type Cluster res <resource name>/delete.
For more information about the process, please refer to the article:
http://gemanjyothisqlserver.blogspot.in/2012/12/sql-2008r22012-cluster-installation.html
2. Delete DNS entries, and force a replication of DNS to the other DNS servers.
For more information about the process, please refer to the article:
http://jon.netdork.net/2011/06/07/failed-cluster-install-and-name-already-exists/#solution
>> 'Resource for instance 'MSSQLSERVER' should not exist'
This error could occur when you already have MSSQLSERVER as a resource in the cluster, which may not be removed completely. To work around the issue, you could rebuild the SQL Server cluster node.
Regards,
Michelle Li

Upgrade from SQL server developer 2008 R2 to SQL Server developer 2012

Hi,
We have bought 5 licenses of SQL server developer 2012.
This licenses provided us an option to use SQL server 2008 R2. And we have been using 2008 R2 till now.
But now we want to upgrade to SQL server developer 2012 edition
I want to know the process for up-gradation. When I looked at the licensing portal, it says "This product does not require a product key"
My questions are:
1) Should I download the 2012 version from licensing center and pass the downloaded copy to respective team members?
2) Can the team member download the SQL server 2012 developer edition from Microsoft site and install it on their machines?
3) Do we need to first un-install 2008 R2?
4) How the licensing can be managed in cases of products which say "This product does not require a product key.", i.e. how can I make sure that no more than 5 installations are done by the team
Thanks

Hi,
We have bought 5 licenses of SQL server developer 2012.
This licenses provided us an option to use SQL server 2008 R2. And we have been using 2008 R2 till now.
But now we want to upgrade to SQL server developer 2012 edition
I want to know the process for up-gradation. When I looked at the licensing portal, it says "This product does not require a product key"
My questions are:
1) Should I download the 2012 version from licensing center and pass the downloaded copy to respective team members?
2) Can the team member download the SQL server 2012 developer edition from Microsoft site and install it on their machines?
3) Do we need to first un-install 2008 R2?
4) How the licensing can be managed in cases of products which say "This product does not require a product key.", i.e. how can I make sure that no more than 5 installations are done by the team
Thanks
1. Developer edition has license associated with it .And yes you can download it if you have subscription.But please be informed that you cannot use Developer edition in production,its not allowed and illegal.
2.You can upgarde from SQL server 2008 R2 to 2012 developer edition by Inplace upgrade method ,you can also follow side by side approach.For side by side approach you have to get new box ,intall OS,then install SQL server 2012 ,move logins and jobs and move
databases by backup restore.You must see supported upgrades
http://technet.microsoft.com/en-us/library/ms143393(v=sql.110).aspx
3.No not ins any case ,please dont do that
4.Licensing question should best be asked with Microsoft licensing expert.
reg process of upgarde first run upgrade advisor and look for error if any.Then run SQL server 2012 setup and in maintenance section select edition upgrade,other process is same as SQL Server installtion
http://www.mssqltips.com/sqlservertip/2505/version-and-edition-upgrades-with-sql-server-2008-r2/
Please mark this reply as the answer or vote as helpful, as appropriate, to make it useful for other readers

Database upgradation from SQL Server 2008 to 2012

Hi Experts,
I am upgrading MSSQL 2008 to MSSQL 2012. This box contains all of the DBs for our Sharepoint installation.
We have identified that we can run the setup wizard to change the database and basically restore a backup from the 2008 database onto the 2012 database running in 2008 compatibility mode. But what should be done about the SharePoint Foundation database running
on the 2008 database?
Help me to resolve the issue.
Regards
Prakash M

Hi Prakash,
Here you are the steps i have used while doing such upgrade:
To Migrate SharePoint DBs from SQL Server to another either same version or to a new version (2008 to 2008 or 2008 to 2012) you can follow the following steps:
Stop all SharePoint and IIS Related Services.
Stop IIS.
Detach all related SQL Server databases.
Configuration database
Central Administration content database
Content databases
Service application databases
Move all database files (.mdf, .ldf, and .ndf) to the new server.
Set up same user permissions on the new SQL server.
Attach your databases to the new SQL Server.
Verify ports in your new SQL server.
Go to your SharePoint server and create your SQL Server Alias.
Start all your SharePoint service
Hope this is helpful
Kind Regards, John Naguib Technical Consultant/Architect MCITP, MCPD, MCTS, MCT, TOGAF 9 Foundation

Upgrading from SQL Server 2005 Compact Edition [ENU] to SQL Server 2008 Express Edition OR HIGHER for Microsoft Security Compliance Manager

I have downloaded the MS Security Compliance Manager, which is in two parts: MS SQL Server 2008 Express Edition & the SCM. The install instructions state the the server needs to be install before the SCM. So as the install continues I get
an error message, which cancels the installation. So, I am trying to install SQL 2008 EE separate from SCM. My question is:
Can I upgrade from my current SQL Server 2005 Compact Edition [ENU]
directly to SQL Server 2008 Express Edition (or higher)?

So as the install continues I get an error message, which cancels the installation.
And which error message did you got?
SQL Server Compact Edition is something different then SQL Server Express (or Standard) Edition, you can't upgrade it as you asked for,.
Olaf Helper
[ Blog] [ Xing] [ MVP]

Error when upgrading from SQL Server 2005 to SQL Server 2014

Hello everyone,
Could you help me, i have an error when i try to upgrade my SQL Server 2005 Enterprise Edition to SQL Server 2014 Enterprise Edition,
All of prerequisits are available and i dont have a problem,
before the end of migration process, i have this error: The group name could not be found (0x84BB0001)
File log:
Feature: Database Engine Services
Status: Failed: see logs for details
Reason for failure: An error occurred during the setup process of the feature.
Next Step: The upgrade process for SQL Server failed. To continue the upgrade process, use the following information to resolve the error. Next, uninstall SQL Server by using this
command line: setup /q /action=uninstall /instanceid=MSSQLSERVER /features=SQLENGINE,FULLTEXT,REPLICATION. Then, run SQL Server Setup again.
Component name: SQL Server Database Engine Services Instance Features
Component error code: 0x84BB0001
Error description: The group name could not be found.
Error help link: http://go.microsoft.com/fwlink?LinkId=20476&ProdName=Microsoft+SQL+Server&EvtSrc=setup.rll&EvtID=50000&ProdVer=12.0.2000.8&EvtType=0x0AD059E6%400x3FAAA006&EvtType=0x0AD059E6%400x3FAAA006
Feature: Full-Text and Semantic Extractions for Search
Status: Failed: see logs for details
Reason for failure: An error occurred for a dependency of the feature causing the setup process for the feature to fail.
Next Step: The upgrade process for SQL Server failed. To continue the upgrade process, use the following information to resolve the error. Next, uninstall SQL Server by using this
command line: setup /q /action=uninstall /instanceid=MSSQLSERVER /features=SQLENGINE,FULLTEXT,REPLICATION. Then, run SQL Server Setup again.
Component name: SQL Server Database Engine Services Instance Features
Component error code: 0x84BB0001
Error description: The group name could not be found.
Error help link: http://go.microsoft.com/fwlink?LinkId=20476&ProdName=Microsoft+SQL+Server&EvtSrc=setup.rll&EvtID=50000&ProdVer=12.0.2000.8&EvtType=0x0AD059E6%400x3FAAA006&EvtType=0x0AD059E6%400x3FAAA006
Feature: SQL Server Replication
Status: Failed: see logs for details
Reason for failure: An error occurred for a dependency of the feature causing the setup process for the feature to fail.
Next Step: The upgrade process for SQL Server failed. To continue the upgrade process, use the following information to resolve the error. Next, uninstall SQL Server by using this
command line: setup /q /action=uninstall /instanceid=MSSQLSERVER /features=SQLENGINE,FULLTEXT,REPLICATION. Then, run SQL Server Setup again.
Component name: SQL Server Database Engine Services Instance Features
Component error code: 0x84BB0001
Error description: The group name could not be found.
Error help link: http://go.microsoft.com/fwlink?LinkId=20476&ProdName=Microsoft+SQL+Server&EvtSrc=setup.rll&EvtID=50000&ProdVer=12.0.2000.8&EvtType=0x0AD059E6%400x3FAAA006&EvtType=0x0AD059E6%400x3FAAA006
Best regards,
Guiga Hafedh

There are more detailed logs for the various components. The one of interesting is the one for the engine or possibly the one for full-text.
These logs are extremely verbose, and the errors are rarely crystal clear, but at least give them a try. If you have problems, find a place to upload them (Dropbox, Skrydrive etc), so that we can look.
The closest at hand is that "group" that cannot be found is an AD group.
Erland Sommarskog, SQL Server MVP, [email protected]

Upgrade from SQL 2000 to 2005

In our test environment, we are on 2005 SP01 PL34, and are
upgrading SQL Enterprise Edition from the 2000 to the 2005 SP2 edition.
The SQL upgrade advisor has given some error messages
in relation to SAP tables, as per below. Should we be concerned about
these, or will they have any effect on upgrading from SAP B1 2005 to
2007 versions?
Remove references to undocumented system tables
Many system tables that were undocumented in prior releases have changed or no longer exist; therefore, using these tables may cause errors after upgrading to SQL server 2005.
Affected tables
Object Name : TmSP_GetDbSizeByDrives
Object Type : P
System Table : spt_value
Object Name : TmSP_CheckDiskSpace
The above messages point to SAP stored procedures.

I believe all those SP are temporary SP for you previous upgrade. Therefore. it should be no problem to upgrade your test database first. You have to back up the pre upgrade database anyway, you should be safe.
Thanks,
Gordon

Upgrade from SQL 2K8 R2 to SQL 2K12 did not upgrade SSRS

I upgraded a SQL 2K8 R2 SP2 SQL Server which also had an instance of SSRS on it. Everything went fine with the database engine upgrade, however SSRS did not get upgraded. Upgrade advisor did not report any issues which would have blocked installation.
If I try to run the upgrade wizard again, it does not show SSRS as something that can be upgraded. Any thoughts or ideas on how I should proceed?

Hi KHLLC,
Are you sure RS did not upgrade? If in Native mode, you can check the versions of the binaries in the program files folder ..\Reporting Services\ReportServer\bin to see if any of the binaries were upgraded to the SP2 versions.
If you are in SharePoint mode, you also need to run the RS SharePoint add-in for SP2. This link might help.
http://technet.microsoft.com/en-us/library/aa905871.aspx
Brad Syputa, Microsoft Reporting Services This posting is provided "AS IS" with no warranties.

Issues when Sharepoint Services 3.0 OS upgraded from windows server 2003 standard to windows server 2003 enterprise

In my sharepoint 2007, I have upgraded the OS from windows server 2003 standard to windows server 2003 enterprise R2 SP2. After the OS upgrade when I run the central admin it's showing this error "Microsoft Windows Sharepoint Services 3.0 Error 2908
error has occurred" screen shot below of the error.
Any help?

Not sure I can help. In general MS does NOT support the upgrade of the Underlying OS without re-installing SharePoint. Many of the prerequisites that were installed when SharePoint was installed are OS specific. You can either contact
Product Support and see if they can provide any assistance or re-install SharePoint from scratch and re-attach/migrate all the existing databases with content into the new system on the new OS.
Paul Stork SharePoint Server MVP
Principal Architect: Blue Chip Consulting Group
Blog: http://dontpapanic.com/blog
Twitter: Follow @pstork
Please remember to mark your question as "answered" if this solves your problem.

In place upgrade from Windows Server 2000 to Windows Server 2003 ADS

Hi...is anyone aware of any issues with performing an in place upgrade from Windows 2000 Server to 2003 Server, which is currently running ESSBASE? Please advise, if you have any information. Thank you.

You can post your question in ESSBase forum
Essbase

Upgrade from sql Server 9.0 to sql Server 12.0

Similar Messages

Maybe you are looking for