Upgrade From SRSS 4.2 RTM to SRSS 5.2.3 - Is This Possible?

Dear All,
I'm planning an upgrade to SRSS 5.2.3 for my production servers (two x64 Solaris hosts in a FOG) from SRSS 4.2 RTM. Does anyone know whether I can do a straight upgrade to 5.2.3 or do I have to go to 5.2 first and then apply the 5.2.3 upgrade?
Many thanks.
Chris

Just to confirm that I've managed to successfully upgrade from a test 4.2 SRS with SRWC 2.2 to the new version 5.2.3 (with SRWC 2.4) in one step. Hopefully the production servers will be just as straight-forward!
Thanks again for the advice.
Chris

Similar Messages

  • I have two macs in my house.  One is newer and came with the os x mountain lion software and the other one needs to be upgraded.  I was wondering if there is a way to take upgrade from one to the other?  Should not have to buy this software again.

    I have two macs in my house.  One is newer and came with the os x mountain lion software and the other one needs to be upgraded.  I was wondering if there is a way to take upgrade from one to the other?  Should not have to buy this software again.

    Welcome to Apple Support Communities
    Buy it for the other computer. Mountain Lion is preinstalled on the new Mac, but you can only use it in the new one

  • I want to upload HTML code from an existing site and then revise in Muse. Is this possible?

    I want to upload HTML code from an existing site and then revise in Muse. Is this possible?

    HTML files from an existing site cannot be reused in Muse as Muse works only with files having extension as .muse.
    However, you use apps like Dreamweaver to edit your existing HTML files.

  • Issues when Upgrading from SRSS 4.1 to 5.2.1

    Hi There.
    Yesterday I upgraded a client's environment from SRSS 4.1 to 5.2.1.
    Environment:
    Solaris 10 hosting Sun Ray Server, Kiosk Mode configured with Windows Connector pointing at Windows Server 2003 Terminal Server. Used utadm to remove the old firmware config and reconfigured with the new firmware config. All Thin Clients now have the new Oracle Branded Firmware.
    After the Upgrade, the users can't seem to hold down the Backspace Key to erase text at a faster pace or use Page Down in an Excel Spreadsheet to get through their workbooks faster. When these buttons are used in their held down position the performance is really slow. Tapping these keys however works fine.
    EG: Tapping backspace 20 times to erase 20 Characters is ok. Holding down the Backspace Key to do the same thing is very slow.
    Anyone know of any issues or performance issues Post running this upgrade.
    Cheers
    - Joe.

    have you looked at the following performance tuning?
    http://docs.oracle.com/cd/E25749_01/E25745/html/Tuning-Performance-Improving-Network-Performance.html
    http://docs.oracle.com/cd/E25749_01/E25745/html/Troubleshooting-Network-Switches.html
    Some other options to consider
    -D Disables the video acceleration path for Windows 7 and
    Windows 2008 R2.
    -M off
    Specify which accelerated media paths to use (supported
    only with Windows XP and Windows 2003).
    -M off
    Specify which accelerated media paths to use (supported
    only with Windows XP and Windows 2003).
    -F off|x11|xvideo|all|keep
    Specify which flash acceleration paths to use and
    allows to set the flash state to it's initial state
    when session is disconnected.
    So can't say that his is a bug. All known issues have been fixed by SRS 5.3. If you still have problems, please open a Service Request via My Oracle Support see
    http://docs.oracle.com/cd/E25749_01/E25743/html/Support.html

  • Upgrade from AppV 4.6 RTM to 4.6 SP3 with HF03

    Hi,
    While doing the upgradation of APPV client from AppV 4.6 RTM (v4.6.0.1523 ) to 4.6 SP3 with HF03, do we need to do any kind of consideration. I am concern about will all
    the packages created with 4.6, work properly in 4.6 SP3 with HF03?
    Packages should work but asking for safer side and also if any link about this is available from Microsoft please provide.
    regards,
    Santosh.

    Hi,
    I am concern about will all the packages created with 4.6, work properly in 4.6 SP3 with HF03?
    They will still work, no re-packaging or conversion necessary.

  • Is upgrade from leopard to snow leopard w/o using disc drive on this computer possible?

    Hi, my disc drive seems to be broken, and I want to upgrade from version 10.5.8 to snow leopard, so that I can then upgrade to mountain lion. Is there a way to do this without using the actual disc drive? (For example, putting the snow leopard disc in my friend's computer and onto a USB?) Or do I need to have my disc drive fixed?
    Thanks!

    Target mode to share drive between systems: http://support.apple.com/kb/PH10725

  • HT201342 I would like to transfer an icloud email address from one apple id to a different apple id.  Is this possible?

    How can I transfer an icloud email address from one apple id to another apple id?

    It isn't possible.  If you need to use a different iCloud account with a different ID as your primary iCloud account, you can still set up your other iCloud address as a secondary account by going to Settings>Mail,Contacts,Calendars>Add Account>iCloud, signing in with your ID and turning Mail to on.  It will be fetch rather than push email, however, as push is only supported in the primary account.

  • I want to upgrade from snow leopard to Yosemite all at one time.  is this a good idea on my imac 8.1 using OS X 10.6.8?

    I am using snow leopard on a mac 8.1  can I up grade in one step to Yosemite or should I up grade to an earlier OS first?

    Yes, you can jump to Yosemite directly. Before you do be sure your computer is compatible:
    Upgrading to Yosemite
    You can upgrade to Yosemite from Lion or directly from Snow Leopard. Yosemite can be downloaded from the Mac App Store for FREE.
    Upgrading to Yosemite
    To upgrade to Yosemite you must have Snow Leopard 10.6.8 or Lion installed. Download Yosemite from the App Store. Sign in using your Apple ID. Yosemite is free. The file is quite large, over 5 GBs, so allow some time to download. It would be preferable to use Ethernet because it is nearly four times faster than wireless.
        OS X Mavericks/Yosemite- System Requirements
          Macs that can be upgraded to OS X Yosemite
             1. iMac (Mid 2007 or newer) - Model Identifier 7,1 or later
             2. MacBook (Late 2008 Aluminum, or Early 2009 or newer) - Model Identifier 5,1 or later
             3. MacBook Pro (Mid/Late 2007 or newer) - Model Identifier 3,1 or later
             4. MacBook Air (Late 2008 or newer) - Model Identifier 2,1 or later
             5. Mac mini (Early 2009 or newer) - Model Identifier 3,1 or later
             6. Mac Pro (Early 2008 or newer) - Model Identifier 3,1 or later
             7. Xserve (Early 2009) - Model Identifier 3,1 or later
    To find the model identifier open System Profiler in the Utilities folder. It's displayed in the panel on the right.
         Are my applications compatible?
             See App Compatibility Table - RoaringApps.
    I would also suggest you do the following before installing the upgrade:
    Repair the Hard Drive and Permissions
    Boot from your Snow Leopard Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list.  In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive.  If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer.
    If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.

  • Hi folks, how to upgrade from 10.6.8 up to 10.8. when there is no possibility in the store?

    The App store does not provide OS X 10.8 and I want to upgrade my machine.
    What to do now??

    See link below. Be sure to check the System Requirements before buying.
      Mountain Lion
    Installing Mountain Lion: What you need to know
    From Kappy
    Install Mountain Lion Successfully from 10.6.8

  • I have 1 iMac, two users (myself and my wife), 2 different Apple ID's, and I want to buy Pages from the App Store so we both can use. Is this possible without having to buy it twice?

    I am wanting to purchase the Pages app from the App Store. I do not want to purchase it 2 times, once for me, and again for my wife. We both share the same iMac, and we both use seperate Apple ID's. Is there a way to purchase it under my user, and have it download to her user as well? I have searched all over the forums for a cut and dry answer to this, to no avail. Any help in the matter would be appreciated, as I am a newbie on the Mac.

    No. You need to buy it for your Apple ID and for the other. You will have problems with updates

  • I wish to add my first podcast link under the "More from Cindy" on my very recent second podcast launch.  Is this possible?

    Hello.  I recently launched my second podcast and would like to direct folks to my first one and vice-versa.  Under the "More from Cindy" category at the iTunes Store page, it (thankfully) shows my website, but does not link to my other podcasts.  Is it possible to have this done?  By the way, I use Godaddy Quick Blogcast so I am not well versed in coding - but I'll give it a try!   Thank you!

    cindyfromfrisco wrote:
    I recently launched my second podcast and would like to direct folks to my first one and vice-versa.
    You may be able to persuade them to let you 'aggregate' your podcasts. I quote:
    'How can I create a page that aggregates my podcasts?
    If you have multiple podcasts listed in the iTunes Store, the iTunes staff can create a single page that lists all of them in one place. We call this page an “artist page.” Note that a podcast can only appear on one artist page.
    To request an artist page, navigate to one of your podcasts, click on Report a Concern, and select Remove a Podcast. In the dialog box, explain that you would like an artist page, give us the exact name of the artist (please don’t include “Inc,” “LLC,” etc.), and list the exact feed URLs or links to your podcasts.'

  • I want to display a Powerpoint Presentation from my MacBook Pro on a Samsung HD TV. Is this possible?

    What cable(s) do I need?
    And is there any way to extend the length of these cables to at least 3-4 feet?

    The TV end probably needs HDMI if that Samsung TV is standard at all.
    The Mac end needs Mini DisplayPort.
    Just get a cable with those plugs at the ends (Mini DisplayPort to HDMI) and you'll be fine. Monoprice.com has it for a lot less than Apple. I have given presentations on projectors and TVs with their cables.

  • Upgrade from SCOM 2012 R2 directly to UR4

    Is it possible to Upgrade from SCOM 2012 R2 RTM to Update rollup 4 ?
    I alreday upgraded but I could not find new dashboard and widgets ?

    It's a cumulative upgrade so you don't need to install all of the release sequential. Latest is enough.
    Did you also import the management packs as mentioned in the guide?
    https://support.microsoft.com/kb/2992020/en-us
    Import the following management packs:
    Microsoft.SystemCenter.TFSWISynchronization.mpb, which has the following dependency:
    Microsoft.SystemCenter.AlertAttachment.mpb, which should be installed from the System Center Operations Manager 2012 R2 media.
    Microsoft.SystemCenter.Visualization.Library.mpb
    Microsoft.SystemCenter.Visualization.Component.Library.mpb
    Microsoft.SystemCenter.Advisor.mpb
    Microsoft.SystemCenter.Advisor.Internal.mpb
    Microsoft.SystemCenter.2007.mp
    Also don't forget to update the console!

  • BSI Tax Factory upgrade from 9.0 to BSI 10D directly??

    Hi Experts,
    I know most of the BSI customers have upgraded from Tax Factory 9.0 to BSI Tax Factory 10.0 as BSI 9.0 support is going to be end of this November 30(2014)..We understand that there is new feature came up BSI 10.0 which is Browser based login to the BSI 10 which runs based Tomcat XML services which needs to be installed on the central windows server server and should be up and running for 24/7..which became a little budget issue for our cllient..
    Client dont want go for buying new windows servers for installation of Tom cat services exclusively..Because of all these constraints we have decided to go to BSI 10D which is having GUI logon feature like BSI 9.0 intead of Tom cat xml services for browser based which is released on 26th July 2014..
    So here My question is ..Is there a possibility to upgrade from 9.0 to 10d directly?? If yes what is the procedure to upgrade from BSI  9.0 to 10d..
    Your inputs in this Upgrade can be really highly appreciated
    Thanks
    Naresh

    Hi Naresh Gollapelly,
    This is also helpful for you 
    SAP has released SAP Note 1875218, which contains the roadmap for BSI TaxFactory 10.0.
    SAP has released the following Notes to allow for the integration of the Payroll U.S. solution with BSI TaxFactory 10.0:
    SAP Note 1903607 (Phase 1 delivery)
    SAP Note 1909014 (Phase 2 delivery)
    SAP Note 1934840 (Phase 3 delivery)
    SAP Note 1937142 (Nonresident Worked Days parameters)
    Installation and Upgrade Notes
    IMPORTANT: For customers with business in Puerto Rico we recommend to wait with an upgrade from BSI TaxFactory 9.0 to BSI TaxFactory 10.0 until cyclic 10.c is available. BSI is planning to release cyclic 10.c (Christmas Bonus) by end of February for certification. The certification will take around 15 days. After the successful certification, BSI will make the executables of BS TF 10.c available.
    Regards,
    Naresh.KM

  • Error during Upgrade from 4.6c to ECC 6.0

    Hi All,
      We are facing an error when upgrading from 4.6c to ECC 6.0. We are facing this error on the table COEP - runtime object inconsistancy. What we found is there is ERP upgrade has created new extra fields in the table. In log file the error is specified as : Duplicate Field name, But we not able to find the duplicate field name in the table.  Please kindly help as early as possible. The upgrade process is stuck.
    Regards
    Anil Kumar K

    Hi Anil,
    Is this issue fixed? Can i know how you fixed it?
    replied to your message Re: How to adopt the index changes during upgrade.
    Thanks,
    Somar

Maybe you are looking for

  • Applet not refreshing in internet explorer 7

    Hi there, I have an application that works fine in IE6 but does not work under IE7. The applet reads a text file every minute, this text file is refreshed also every minute. I have found out that if you press x in the Java console to clear the classl

  • How to re-install every thing fresh on Nokia E5-00

     How to re install every thing fresh on Nokia E5-00, as ovi too is not giving any option to re install  Operating system

  • Clean Install of Win7 64 bit

    I have several questions concerning what are the proper drivers to use to attempt a clean install of Win 7 64 bit using Boot Camp. I see that there are (2) documents explaining installation with Boot Camp,they are: plugin-BootCampInstall-Setup.pdf an

  • Communication channel - cache problem?

    Hi experts, sometimes when I change parameters in communication channels that have thrown an error (in order to solve the problem), this modification is not immediatly working after activation of CC: the CC still works with old configuration. To solv

  • ICal Shows NO calendars but iTunes sees and syncs...

    iCal shows no calendars when I open it. When I sync my iPhone it knows there are 3 calendars, but they don't show up in the app. I've tried to repair permissions and delete the prefs and start over, but nothing works. I have my database backed up and