Upgrade Hard Drive Macbook Pro 13" 2009
I am really unsure which hard drive to get. I video edit a lot my video editing is taking up over three quarters of my hard drive space. Which one is better? I am not good with hard drive names/features such as SATA and buffer. The 750GB got better reviews but the 1TB one got much more space. Help please!
Western Digital 2.5 inch Scorpio Black 750GB 7200rpm SATA 16MB Internal Hard Drive
or
Seagate ST31000524AS 3.5 inch Barracuda 1TB GB 7200rpm SATA Drive with 32MB Buffer
links: http://www.amazon.co.uk/Western-Digital-Scorpio-7200rpm-Internal/dp/B004I9J5OG/r ef=cm_srch_res_rtr_1
http://www.amazon.co.uk/Seagate-ST31000524AS-Barracuda-7200rpm-Buffer/dp/B004HBA GSO/ref=sr_1_1?s=computers&ie=UTF8&qid=1365196109&sr=1-1&keywords=1tb+7200rpm
Any hard drive should be fine although I'd stay away from the so-called "green" drives. Hitachi, Seagate, Toshiba are all good brands.
Similar Messages
-
Change Hard Drive MacBook Pro mid 2009
My hard drive is dying (the beach ball appears, concurrent with a sound that can only be described as a squeak, coming from, I assume, the hard drive. Then, the beach ball freezes and the machine can only be revived by a hard restart)
My Question; can I put a Seagate Momentus XT ST750LX003, 750GB, Bulk 2.5 ", 8GB Flash, SLC, 32MB Cache, 7200 U / min • SATA III 6.0Gb / s in a Macbook pro Mid-2009 15"?
Would be very grateful for a replyAsk as many questions as you like, OK.
Basically yes they are all backward compatible except for the drives and or firmware on the drives that refuse to be backward compatible. Which drive they are I have no idea but mostly they are SSDs and not spinning HDD. The transfer rate on any spinning HDD is slow enough, even on the XT series, that if you have a SATA II bus the drive can't really fill it up, IE can't go over its theoretical Rated transfer speed and or the actual data rate it can handle.
The problem occurred on 2009 MBPs because some of the original cables used could not handle the extra data rate the XT series drive could deliver, both reading and writing to the drive. -
Apple replaced my hard drive (macbook pro 2011). Now I am unable to buy/download ilife from the apple store "on this computer". Any ideas as to why?
Thanks for your help in advance!If the computer shipped with Snow Leopard then you would have received an install DVD for iLife with the computer.
-
Help me with a Hard Drive upgrade on a macbook Pro (mid 2009)
I have a 500gb drive that i want to upgrade. I see lots of choices at OWC and wonder how to select a good reliable 750 gb or 1 TB internal hard drive. I dont do a lot of imovie video editing so i think 5400 would be ok but would like some guidance.
7200 vs 5400 and 750 vs 1TB, pros and cons. I would love to go to a 1 TB if it is reliable.
Also, OWC recommends restoring the drive prior to the swap out. Is that the best way to do it?
What manufacturer do you recommend?
any help would be appreciated
Thanks
RossYou have received good advice from both conran and Network 23. I have 4 Seagate 750 GB 7200 RPM HDDs, one in my primary MBP and the others in enclosures for Time machine and redundant backup. I have a 500 GB 5400 RPM Hitachi in my older MBP which originally came in my primary MBP. And I have a 500 GB 7200 RPM Seagate and 3 Toshibas. All of them are STILL spinning. As mentioned by conran, that can always change.
There are HDD aficionados of certain brands of which I am not. If it works its good, if not its bad. This is an anecdotal observation on my part, but there seem to be more problems with Western Digital HDDs than others. (I may be accosted now by Western Digital fans)
There is a phenomenon that I came across the other day that I found most interesting. A HDD with higher disk density (more capacity) at 5400 RPM may outperform a HDD with less disk density (Less GB capacity) at 7200 RPM. In other words, disk speed alone is a determinant to HDD efficiency.
OWCs recommendation about restoring is a good one.
For what its worth, here is how I have swapped HDDs in the past with 100% success:
INSTALLING A NEW HDD IN A MBP
1. Make certain that you have backed up all of your important data.
2. You will need a HDD enclosure. One with a USB connection will do. A 9 pin Firewire is better.
3. Install your new drive in the enclosure and connect it to your MBP.
4. Open DISK UTILITY>ERASE. From the left hand column drag the new drive into the 'Name' field. Make sure that the format is 'Mac OS Extended (Journaled)'. Click on the 'Erase' button.
5. Click on the 'Restore' button (on top). Drag the old drive into the 'Source' field and the new drive into the 'Destination' field. Click on the 'Restore' button on the bottom right hand corner.
Depending upon the amount of data you are transferring, this may take a couple hours or more. A Firewire will speed up the transfer. This will result in both drives having identical information on them.
6. After the data transfer has completed, you may swap the drives. Start the MBP and you have finished the installation. The initial boot may take a bit longer than you are accustomed to, but that is normal.
7. When you are satisfied that the new hard drive if functioning properly, you can erase the old drive and use it for any needs that you may have.
Ciao. -
Spinning ball, hard drive, macbook pro
Dear Experts
I have mid 2009 Macbook pro (2.66 Ghz). I am frequently running into spinning ball that freezes my mac even for opening Safari, iPhoto etc. I am user of CPU demending softwares. Here is what I did till now
1. Free space on HDD is 78 GB (out of 320 GB HDD)
2. Ran Disk utility --> verified.
3. SMART status is OK.
4. Fixed all permissions.
5. Ran disk tool pro--> SMART status OK
6. Fixed bad alias
7. Removed all cache, junk, trash with CleanMyMac.
However, problems is persisted. I ran a bad sector check on disk tool pro and it shows all time that scan for bad sectors is failed while rest of the tests passed. I wonder whether my HDD is failing or what? I have already backed up on Time Machine.
Any experts has comments/suggestions? That will be of great help.
Thanks
SaiWhat you describe seems indicative of hard drive failure. You did yourself no favor, however, by running "CleanMyMac" which may have deleted some very important files.
I would recommend doing a full and complete reinstallation of everything. If you still have the 'beachballing' then I would try replacing the drive.
Clinton -
Backup showing up on internal hard drive - MacBook Pro
I bought my first Mac ever a few days ago, and I am very pleased in spite of the slight learning curve! I have a MacBook Pro, 13 in, with Retina. I did a backup with Time Machine onto my external hard drive. Again, no problems. But, when I checked out system information and looked under storage, I saw 48 GB taken up by backup! What is that all about? Is there a way to delete that and keep all backups on the external drive? Thanks!
That's a local snapshot
You can disable:
Open Terminal (in Applications/Utilities)
Enter: sudo tmutil disablelocal
Backups on the External Drive will not be affected. -
Trying to replace a failed hard drive Macbook Pro 17 2011
So, my Hitachi 750 GB HD just failed on my Macbook Pro 17" (2011). I bought a new Travelstar 1 TB 7200 RPM HD and have installed it without an issue (very simple to do). BUT, I do not have any install disks to use to install the OXs. This laptop originally had Mountain Lion installed, which I upgraded to Mavericks via iTunes. How can I install the OXs and then proceed to formatting the new HD? Am I going to have to call Apple to see if I can get install disks for Mountain Lion? Can I somehow create my own install disks from a Mavericks download? I'm pretty new to Macs, being a PC person, so not sure how to proceed at this point. Thanks for any help you can give me!
PattyOkay. So I was able to install, and format the new internal HD. Was able to install Lion then Mavericks. Next, is to try to retrieve my data from my failing old HD. I bought an enclosure (sled), and have my HD hooked up to my laptop, and it finally showed up in Finder. So. Now. What is next? I am seeing a screen that shows these folders: Applications (translate for the PC me = Programs), Library (I am assuming?? these are my various files such as docs, photos, music, etc.) System, opt, and Users. Should I just try to drag and drop some/all of the folders onto my desktop, then open up the folders and do something with the contents? Sorry to sound so vague and frankly, rather dumb-sounding, but the nomenclature with a Mac is a bit different than with a PC, and Finder is a little different looking to me than Windows Explorer. I am relieved to see that I was even able to get this failing drive to show up in the first place, so I feel a little like I could be on borrowed time with it. I think it may just be bad sectors, since I don't hear any clicking or other mechanical issues with the drive as it spins. But, any further help with retrieving the data would be VERY much appreciated!!
-
I am just starting to move from Final Cut Express to Final Cut Pro. I will use FCP on both a Mac Pro and MacBook Pro.
When I edit with the laptop I plan on importing all my video into an external 7200rpm hard drive. Most of the material will be HD.
I was thinking of buying a G-Technology drive. I noticed that some are called G-DRIVE and others are called G-RAID. What's the difference? Does is really matter? Do you think that 500GB is sufficient for HD editing projects that range from two minutes to one hour?
And can you please suggest a couple of other quality alternatives.G-Raid...two drives tied together (raided together) to increase speed performance. G-Drive, a single drive...a tad slower. If you are going to be editing AVCHD, that imports as ProRes, you will want the G-Raid. The G-RAID3 is darn solid.
Shane -
How to install hard drive Macbook Pro 10.6.3
I have a Macbook Pro Os X 10.6.3 Snow Leopard. I was told that I have a failed hard drive. It costs about $195 for repair at my local shop. I read that I can purchase my own hard drive from BestBuy and have geek squad to install it. The guy says it costs $50 for installation but about $180 to reinstall the system. My question is....is there a good link you could give me for directions to how I can install my own hard drive? Also, when he says install the whole system, what does that mean. I already have my installation disks that came with my Mac. The hard drive that's currently in my Mac is a Western Digital 250GB. Thanks in advance!!!
Thanks for your reply. I let it run and it eventually said that Mac OS X can't be installed on the computer. And that the installer could not install the necessary support files. This was all done on a brand new hard drive and was the exact error given on my previous hard drive. (The one that I was told had failed). I tried installing from a clone of the CD on a USB but it stalls at the blue screen and eventually has a rotating cursor. Do you recommend anything further?? I would appreciate your help, greatly.
-
Dual hard drive macbook pro, triple boot, win7 won't load
As you have requested @ChristopherMurphy:
I've got somewhat of a unique situation (I believe).
I have a 13" Macbook Pro 9,2 (mid-2012). It came with a 750gb SATA HDD and internal optical drive. I installed a Samsung 840 Pro 256gb SSD in place of the HDD, then put the HDD in place of the optical drive. I have the system set up so that the SSD is my primary OSX drive with one single visible partition. Then I have the HDD set up so that the first 500gb is an HFS partition, and the rest is set aside for bootcamp. It was originally one 750gb single HFS partition, but then I used the boot camp assistant to section off the last 250gb for windows.
For the life of me I couldn't get a bootcamp install to work off of a Boot Camp Assistant created a x64 Win7 USB stick, until I read somewhere that I needed to actually disconnect the sata connector for my SSD. This worked, and Win7 was able to format from FAT32 to NTFS, then install and boot correctly from the HDD (with the SSD unplugged), and leave the HFS 500gb partition intact.
Then when I plugged back in the SSD, OSX can see that there is a bootable partition when I go in to "Choose Startup Disk" in SysPrefs, and if I hit the option key while booting, but all I get is a black screen with a blinking cursor. I believe that x64 Win7 is mad at me because I have changed the drive numbers that it uses to references how to boot up properly. I believe the solution may lay in running a Win7 boot repair set of commands, but I can't seem to access the Win 7 recovery console or "Repair Installation" feature using the USB stick that BCA created.
To complicate matters further, I successfully created a Ubuntu 13.04 USB stick, used rEFIt to boot off of it, and then had it split off and use the second half of my 250gb ntfs partition on the HDD to install linux.
To complicate things even further, I am using filevault2 with FIPS encryption module to encrypt both the SSD, and the HFS partition on the HDD.
I have installed rEFIt and used "bless" to have it be my boot selection menu (as instructed here: https://wiki.debian.org/InstallingDebianOn/Apple/MacBookAir/2-1#EFI_and_Partitio ning). I can boot successfully into OSX, and I can boot successfully into Ubuntu. I still can't boot into Win7 though.
Here is the output from a variety of commands I've seen you ask others for: (http://pastebin.com/u3V01iWR)
mbltccmbp:~ trevorcobb$ diskutil list
/dev/disk0
#: TYPE NAME SIZE IDENTIFIER
0: GUID_partition_scheme *750.2 GB disk0
1: EFI 209.7 MB disk0s1
2: Apple_CoreStorage 501.8 GB disk0s2
3: Apple_Boot Boot OS X 134.2 MB disk0s3
4: Microsoft Basic Data BOOTCAMP 124.0 GB disk0s4
5: Microsoft Basic Data 115.5 GB disk0s5
6: Linux Swap 8.5 GB disk0s6
/dev/disk1
#: TYPE NAME SIZE IDENTIFIER
0: GUID_partition_scheme *250.1 GB disk1
1: EFI 209.7 MB disk1s1
2: Apple_CoreStorage 249.2 GB disk1s2
3: Apple_Boot Recovery HD 650.0 MB disk1s3
/dev/disk2
#: TYPE NAME SIZE IDENTIFIER
0: Apple_HFS Macintosh SSD *248.9 GB disk2
/dev/disk3
#: TYPE NAME SIZE IDENTIFIER
0: FDisk_partition_scheme *8.3 GB disk3
1: DOS_FAT_32 WININSTALL 8.3 GB disk3s1
/dev/disk4
#: TYPE NAME SIZE IDENTIFIER
0: Apple_HFS Macintosh HD *501.5 GB disk4
mbltccmbp:~ trevorcobb$ sudo gpt -r -v show disk0
Password:
gpt show: disk0: mediasize=750156374016; sectorsize=512; blocks=1465149168
gpt show: disk0: Suspicious MBR at sector 0
start size index contents
0 1 MBR
1 1 Pri GPT header
2 32 Pri GPT table
34 6
40 409600 1 GPT part - C12A7328-F81F-11D2-BA4B-00A0C93EC93B
409640 980102336 2 GPT part - 53746F72-6167-11AA-AA11-00306543ECAC
980511976 262144 3 GPT part - 426F6F74-0000-11AA-AA11-00306543ECAC
980774120 792
980774912 242186240 4 GPT part - EBD0A0A2-B9E5-4433-87C0-68B6B72699C7
1222961152 225603584 5 GPT part - EBD0A0A2-B9E5-4433-87C0-68B6B72699C7
1448564736 16582656 6 GPT part - 0657FD6D-A4AB-43C4-84E5-0933C84B4F4F
1465147392 1743
1465149135 32 Sec GPT table
1465149167 1 Sec GPT header
mbltccmbp:~ trevorcobb$ sudo gpt -r -v show disk1
gpt show: disk1: mediasize=250059350016; sectorsize=512; blocks=488397168
start size index contents
0 1 PMBR
1 1 Pri GPT header
2 32 Pri GPT table
34 6
40 409600 1 GPT part - C12A7328-F81F-11D2-BA4B-00A0C93EC93B
409640 486717952 2 GPT part - 53746F72-6167-11AA-AA11-00306543ECAC
487127592 1269536 3 GPT part - 426F6F74-0000-11AA-AA11-00306543ECAC
488397128 7
488397135 32 Sec GPT table
488397167 1 Sec GPT header
mbltccmbp:~ trevorcobb$ sudo fdisk /dev/disk0
Disk: /dev/disk0 geometry: 91201/255/63 [1465149168 sectors]
Signature: 0xAA55
Starting Ending
#: id cyl hd sec - cyl hd sec [ start - size]
1: EE 0 0 1 - 1023 254 63 [ 1 - 409639] <Unknown ID>
2: DA 25 127 15 - 1023 254 63 [ 409640 - 980102336] <Unknown ID>
3: AF 1023 254 63 - 1023 254 63 [ 980511976 - 262144] HFS+
*4: 07 1023 254 63 - 1023 254 63 [ 980774912 - 242186240] HPFS/QNX/AUX
mbltccmbp:~ trevorcobb$ sudo fdisk /dev/disk1
Disk: /dev/disk1 geometry: 30401/255/63 [488397168 sectors]
Signature: 0xAA55
Starting Ending
#: id cyl hd sec - cyl hd sec [ start - size]
1: EE 1023 254 63 - 1023 254 63 [ 1 - 488397167] <Unknown ID>
2: 00 0 0 0 - 0 0 0 [ 0 - 0] unused
3: 00 0 0 0 - 0 0 0 [ 0 - 0] unused
4: 00 0 0 0 - 0 0 0 [ 0 - 0] unusedUbuntu was installed after Windows 7, that is correct.
Ubuntu and Win7 are installed on the final 250gb section of the 750gb hdd that I have connected to the Optical Drive SATA connector using a HDD optibay caddy.
i can successfully boot into the Filevault2 unlock screen, then into OSX on the SSD using the stock Apple EFI or rEFIt.
i can also successfully boot into Ubuntu using rEFIt.
The Apple EFI bootloader and rEFIt both can see the Windows installation and claim to be able to boot it, but it just hangs at a black screen with blinking cursor.
i have quite a bit of experience messing with partition tables in troubleshooting a friend's borked dell laptop that had a bunch of dell custom partitions on the drive. i've used Hiren's bootcd and many of the tools on it before. This EFI GPT + MBR stuff is a whole different animal for me though.
Can I use any of the commands listed below from a windows 7 recovery USB stick?
Bcdboot C:\windows
BOOTREC /FIXMBR
BOOTREC /FIXBOOT
BOOTREC /REBUILDBCD
BOOTREC /SCANOS -
Out of the box 15" Macbook Pro (June 2009) - How much Hard drive taken?
Hello!
I just bought the 15" Macbook Pro (June 2009) 2.53GHz w/ 8GB-Ram upgrade and notice when I look at my system profile I see that my 320 GB hard drive already has around 20 GB taken up!
Is this normal? Is there a feature that lets me see where/what those 20 GB are?
I'm new to Mac so any help would be greatly appreciated - Thanks!!Welcome to Apple Discussions!
There are some utilities that will tell you what is taking up your hard drive space:
http://www.derlien.com/
http://www.omnigroup.com/applications/omnidisksweeper/
http://www.id-design.com/software/whatsize/
I believe the first one--Disk Inventory X--is still free, and there is a small charge for the others.
Happy computing! -
Can I swap the hard drive from MacBook Pro 17 (2009) to MacBook Pro 15 (2006)?
My MacBook Pro 17 (2009) died. Pushing the power button gets no response. I had had problems with it for some time turning it on, it usually taking many many tries. Plus when I'd try to do a restart after updating software, instead of doing so it'd shut off super quick with a *pop* sound. There was never any of the typical hard drive going bad sounds I've read about and seen in videos. Since it has refused to turn on I've gone through every suggestion I can find to get it to turn back on. Unhook the battery and try starting from just the power cord; the shorting the power pads move; some thing undoing the battery, counting to 10, and then the next steps now escape my memory, but doing more counting to 10 inbetween; unplugging the battery and leaving it sit for 2 days with no power cord plugged in either, then hook it to a power cord and turn it back on; and so many more.
Also the symptoms just before this fiasco were as follows: I had a CD in the internal drive and was browsing through the images on it via the handy previewer using the space bar. Then I decided to quite, tried ejecting the CD by dragging the icon to the trash, and nothing. I tried again. The same. Then I pushed on the eject key, with the ejct icon popping up on the screen momentarily, but still nothing. Then it appreared as though some things worked and other things were not working. In my frustration I went to the Apple menu and clicked restart with a wince knowing it was going to take forever to turn back on. It did the usual quickly off with a *pop* and made super short lame attempts to turn back on when using the power button. Of course the CD kept trying to spin for a split second and then the little indicator light on the front would go out, then no noise at all.
Since I do not believe it is the hard drive (of course I could be wrong not being a Mac nerd at all), I was wondering if I can switch the hard drive to my Macbook Pro 15 (2006)?
I tried this, but it would not read the hard drive. Just a blank grey screen. If it is possible to do this swap, what are the exact steps to do? Please answer like I'm completely illiterate on this, because I really am. I'm super scared of losing everything on the dead MacBook's hard drive. Yeah yeah, I know: then why have I not been backing things up? I had the week prior. Believe me I WILL be doing it daily from now on if I get this mess straightened out!
Here are the specs for each MacBook Pro:
Name: MacBook Pro 17 (info gained from the serial on the bottom and then looked up online)
Model: A1297
Model Code: mbp_17_early_09
CPU Type: Intel Core 2 Duo
CPU Speed: 2.8GHz
RAM Type: DDR3 PC8500 SODIMM 1066MHz
RAM Slots: 2
Max RAM by Slot: 2 x 4GB
Maximum RAM: 8GB
RAM Pairing: Modules may be installed individually
Hard Drive Connection: SATA 300
Hard Drive Platter Size: 2.5"
Device Connectivity: USB 2.0, FireWire 800
Video Output (base graphics option): Mini DisplayPort
Expansion Slots: ExpressCard/34
Max Operating System Version: 10.6.8 (I believe that is what was last on the computer)
Name: MacBook Pro 15" (retrieved from the System Profiler on this Mac)
Model Identifier: MacBookPro2,2
Processor Name: Intel Core 2 Duo
Processor Speed: 2.33 GHz
Number Of Processors: 1
Total Number Of Cores: 2
L2 Cache: 4 MB
Memory: 3 GB
Bus Speed: 667 MHz
Boot ROM Version: MBP22.00A5.B07
SMC Version (system): 1.12f5OGELTHORPE really sorry to keep bugging you, but it's obvious you know what you are talking about and I'm stuck on thin ice here getting this fixed, because there are no authorized Apple reps here. I would rather shoot myself for messing up, then to trust someone who "says" they can fix my Mac down here.
I checked out a company owned by ebay that is the same down here, called MercadoLibre. There are quite a few adapters listed there. I'd like to give you links for some and was wondering if you minded taking a look to tell me if any seem to fit the bill. Some have specs in English, others don't. (Google translater is my friend!)
#1. http://articulo.mercadolibre.com.uy/MLU-415826915-adaptador-usb-a-ide-y-sata-con -cables-y-fuente-envio-gratis-_JM
#2. http://articulo.mercadolibre.com.uy/MLU-416270876-usb-20-to-ide-sata-25-35-hard- drive-_JM#D[S:HOME,L:HISTORY,V:1]
#3. http://articulo.mercadolibre.com.uy/MLU-416384859-adaptador-usb-20-a-sataide-_JM
#4. http://articulo.mercadolibre.com.uy/MLU-415596152-adaptador-usb-20-para-sata-e-i de-manhattan-_JM
#5. http://articulo.mercadolibre.com.uy/MLU-416061182-adaptador-de-usb-a-sata-o-ide- 3525-con-fuente-externa-_JM
#6. http://articulo.mercadolibre.com.uy/MLU-416061069-convertidor-usb-20-a-sata-hdd- 25-soporta-hasta-1tb-_JM
These are all cost effective enough that I don't care the price - cheap, expensive - whichever will work the BEST!
I've also looked for the 7200 rpm HDD, and although I found some, I'll be danged if they are not 3.0, instead of the 2.5 that I have. Grrrr! I was willing to spend the $90 for 1tb... or being the non-techie that I am, can this 3.0 go into my 2006 MBP??
Just so you can see what all is listed right now:
http://listado.mercadolibre.com.uy/7200-rpm-hdd-2.5-macbook-pro
Another newbie question: How do I check what the amount if RAM is presently installed in it? (I might be a greenhorn, but I take pride in not being a dumbie and I learn when taught)
Right now, I'm willing to spend almost anything. I want a few files that are on the HDD at the moment that I was stupid and did not backup on my external. One file I worked on all day due to the dimensions I had to design it at and each effect took a long time to render. I really don't want to do that one again!.. I'm also willing to spend anything that won't cost me the price of a new iMac. Figure that should be the next one I buy that is affordable, but won't be overworked like the MBP was.
Once again, thanks much for all of your help! -
Samsung hard drive problems with mid 2009 Macbook Pro
Arghh, this is driving me mad.
I'd like to know if anyone has installed a Samsung HM641JI SATA II hard drive into a mid 2009 Macbook Pro (mine is a 2.8Ghz) and, if so, how they managed it. The drive is 640GB. These are the steps I've taken:
1. Swap out the stock drive for the Samsung
2. Boot from a USB drive which contains a mirror of my system
3. When the system identified the new disk, I formatted it with 2 partitions (GUID table, HFS journaled)
4. Reboot
5. System is very slow. Boots from USB but can't use keyboard to login
6. Switch off and try again
7. Remove Samsung drive
8. Reboot from USB (works perfectly)
9. Downgrade firmware to 1.6
10. Replace samsung drive and try again
11. System boots from USB
12. Verify that drive is running at 1.5Ghz
13. Disk utility and system profiler both crash
14. Disk unmounts by itself and other random weirdness
15. Remove Samsung drive
I've read endless reports about the firmware in this model of Macbook Pro and its issues with SATA II but struggling to find anything current and specific. Two questions:
a. Is there anythign I can do to get this drive to play nicely?
b. What drive should I get if the answer to a is no?
As a bit of background.. my system began playing up last week with lots of spinning beach balls resulting in forced switch offs. Booting from a mirror on a USB drive works perfectly so I concluded that the drive was on its way out. A drive test utility confirmed this. I'm now wondering if it really was the drive or the cable or the logic board.
Any advice appreciated.
Cheers
//AI'm coming around to the idea that this might be a problem with the SATA cable rather than the drive.
I currently have the stock drive (Hitachi) back in the macbook. It mounted for a while and was then ejected when I tried writing data to it. System profiler reports that "There was an error while scanning for Serial-ATA devices."
I was able to mount the same drive in a USB enclosure this afternoon without any problems. Right now, I seem to be having issues with both the Samsung drive and the Hitachi drive - I wasn't suspicious of thr latter because I thought it was failing.
I found one or two accounts of other people having similar problems that were resolved with a new sata cable.
How does a cable fail? Could this be my problem?
Cheers
//A -
I have apple macbook pro mid 2009 ... my hard disk stopped working and i had mac os 10.6.8 in it ... i bought a new hard disk drive but i didn't have my CD so i installed my friend's mac os 10.5.8 in the new hard disk ... i want to get my previous 10.6.8 back ... hope there is a way to do so
Upgrading to Snow Leopard
You must purchase Snow Leopard through the Apple Store: Mac OS X 10.6 Snow Leopard - Apple Store (U.S.). The price is $19.99 plus tax. You will be sent physical media by mail after placing your order.
After you install Snow Leopard you will have to download and install the Mac OS X 10.6.8 Update Combo v1.1 to update Snow Leopard to 10.6.8 and give you access to the App Store. Access to the App Store enables you to download Mountain Lion if your computer meets the requirements.
Snow Leopard General Requirements
1. Mac computer with an Intel processor
2. 1GB of memory
3. 5GB of available disk space
4. DVD drive for installation
5. Some features require a compatible Internet service provider;
fees may apply.
6. Some features require Apple’s MobileMe service; fees and
terms apply. -
i see that i have a problem after installing my new hard drive on my macbook pro mid 2009 version. I put a new hard drive, with all of my information from my old drive installed on it, into the computer. but now have the blinking question mark folder. I see that it means that it isn't reading the new hard drive.
did i miss a step between transferring all of my information from my old hard drive to the new hard drive and installing the new hard drive into the computer. I believe that i installed properly. it was quite easy.
thanks for your helpIt means there is no bootable system on the drive. If you still have access to the old drive, then I suggest you boot from it then clone it to the new internal drive. Use OPTION boot to boot from the Recovery HD on the old drive:
Boot to the Recovery HD:
Restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
1. Select Disk Utility from the main menu then press the Continue
button.
2. Select the destination volume from the left side list.
3. Click on the Restore tab in the DU main window.
4. Select the destination volume from the left side list and drag it
to the Destination entry field.
5. Select the source volume from the left side list and drag it to
the Source entry field.
6. Double-check you got it right, then click on the Restore button.
Source means the external old drive. Destination means the new internal drive.
Maybe you are looking for
-
Weird: Signed in = no post, not signed in = post is there
I just posted my reply to this discussion using Firefox on my PC: https://discussions.apple.com/message/23203419#5383748 When I'm signed in, I cannot see my post, but when I'm signed out, I can see my post! This is happening on my PC in Firefox and a
-
i did download jailbreakme.com but it is totally legal and idk if that is what caused my phone to keep freezing.. my phone wont turn off / turn on unless charged or i let it die. i really dont want to have to buy a new phone.. please help!!!!
-
I have a table on which i need to generate serial number or batch numbers based on two criterias that by each unique desc, and item qty less than 10 per batch and item weight less than 50, i got the solution yesterday but when i rewrote the query usi
-
Pages - how to make a template?
I need to print in two colums, landscape, on both sides of the paper. So far, no problem as my Kyocera 6950 does it automatically. BUT the paper I use has a printed logo on one side (let's call it page nr 1/3/5/7 etc) and I need obviously not to pri
-
Friends, I've been digitizing my church's old Sunday services (on cassette) from years past so that they are preserved. I've recorded 24-bit Broadcast-WAV files into logic, which I then process using noise reduction plug-ins to eliminate tape hiss, e