UPGRADE MEMORY - HP ENVY Recline Touch All in One – 23-k300br

Hi from Brasil How do I UPGRADE MOMERY of HP ENVY Recline Touch All in One – 23-k300br ???Is there a VIDEO... or a MANUAL showing that ??? ThanksYours Sincerely

Hello , Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the HP Forums I would like to direct your attention to the HP Forums Guide First Time Here? Learn How to Post and More. I have read your post on how you are looking to upgrade the RAM on your desktop computer, and I would be happy to assist you in this matter! To upgrade the memory, I recommend following the steps in this document on Adding or Replacing Memory for HP Envy Recline 23 TouchSmart All-in-One PCs. Please re-post with the results of your troubleshooting, and I look forward to your reply!
Regards

Similar Messages

Windows 8.1 Pro upgrade issue (from Windows 8 Pro) on Envy 23 TouchSmart All-In-One...

Hello,
I have an HP Envy 23 Touchsmart All-In-One that I purchased a year ago (around 12/2012). It came preinstalled with Windows 8.
System Information:
a) Intel(R) Core(TM) i7-3770S CPU @ 3.10 GHz
b) 8192 MB of RAM
A few weeks after I had bought the system, I upgraded to Windows 8 Pro with Media Center that I purchased through Microsoft's upgrade program.
Last week (10/19/2013), I saw the upgrade option to Windows 8.1 in the store and decided to upgrade.
After a few minutes, I got a prompt asking me to restart the computer and I did.
However, I noticed that the screen went blank, but it really didn't restart - I saw that the hard disk light was still blinking and I waited for around 15 minutes. I know it didn't restart because if it did I would have seen the HP logo on the BIOS screen. A little later, the system went into sleep mode (at least, the power button light was blinking slowly as if it was on sleep). Since it was late at night, I decided to leave the system alone and decided to check on it next morning. Next morning, it was still in sleep mode (as I feared) - when I tried to wake it up from sleep by moving the mouse/hitting the return key, it made the exact sounds as if it was waking up from sleep (as it always does), but the screen was still blank. The power button slight was glowing steadily indicating that it is awake now.
At this point, I decided to power down the system by holding the power button for a few seconds. Upon reboot, I saw the HP logo on the BIOS bootup screen and then the screen went blank and nothing came up.
So I decided to do a system recovery using my Windows 8 recovery CD and powered down the system with the CD in its slot. This time, the system came up and immediately started restoring my OS to a previous version.
Upon logging in to the recovered system, I got the following message:
"Couldn't update to Windows 8.1
Sorry, we couldn't complete the update to Windows 8.1. We've restored your previous version of Windows to this PC.
0xC1900101 - 0x40019".
I tried reinstalling Windows 8.1 a couple of times after this. Once by disabling all the non-Microsoft services and disabling all the startup programs. Still the same result.
I don't have any antivirus software on my system other the default Microsoft system protection software.
Any help, much appreciated.
Thanks.
This question was solved.
View Solution.

I've posted the following on the following Microsoft form.
http://answers.microsoft.com/en-us/windows/forum/windows8_1-windows_install/81-install-error-0xc1900...
Since my hardware is the subject of this HP thread, I thought it might be advantagous to others to post it here too.
In the hopes of preventing anyone else expending this amount of time:
HP Envy 23, no external devices except wireless keyboard&mouse
1) Attempted 8.1 from MSDN ISO download and dvd burn. Result: 0xc1900101-0x40019
2) Attempted 8.1 from MSDN ISO download and dvd burn just because I didn't believe number 1. Result: 0xc1900101-0x40019
3) Attempted 8.1 from Microsoft store Result: 0xc1900101-0x40019
4) Attempted 8.1 from Microsoft store just because I didn't believe number 3 Result: 0xc1900101-0x40019
5) Read online that Task Manager, startup, disable all would work. Attempted 8.1 from Microsoft store Result: 0xc1900101-0x40019
6) Read online that enabling security to admin group for Crypto directory. Attempted 8.1 from Microsoft store Result: 0xc1900101-0x40019
7) Read online that ensuring drivers are all current. MS update, HP update, physically clicked on each driver, update in Device manager, Attempted 8.1 from Microsoft store Result: 0xc1900101-0x40019
8) Read online that turning Firewall off, Attempted 8.1 from Microsoft store Result: 0xc1900101-0x40019
9) Woke up this morning and evidently Win 8.0 decided on its own to Attempted 8.1 from Microsoft store Result: 0xc1900101-0x40019
Good news: Fall back to 8.0 has been flawless with the exception of the need to reenter the network key.
Bad news: Still on 8.0
Based on, in every case, the upgraded machine can be: Accessed via admin share c$ from a network device and can NOT be remoted into and the local display is 'illuminated' but not responsive and dark black (BSOD), my GUESS is a screen / display driver is failing on first boot to 8.1
I've reviewed everything on the C: drive with the extension "log" and a date close to the install date/time without success of isolating exactly what is failing.
Hope no one else expends this much time.
David
Professional Developer

Looking for 2GB of ram to upgrade my hp pav 20-b010z all in one

I am trying to find just 2GB of ram so I can upgrade my HP Pav 20-b010z all in one computer. My product # C1A32AV#ABA. It only came with 2 GB.
I have DDR3-1066MHz SODIMM Memory and Windows 8 64-bit. I only have one stick in the computer. I was told that I need to use PC3-12800. I'm pretty new to all of this.
Could someone please tell me what kind of ram I need to use that would be compatible with my computer. What brand too, please. If there is one by HP I would gladly like to use that.
Thank you for any help you can provide
This question was solved.
View Solution.

Hi:
Please take a look at the product specs for your PC at the link below.
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c03569440&tmp_task=prodinfoCategory&cc=us&dlc=en...
The PC3-12800 memory downclocks to 1066 MHz (PC3-8500).
You can install up to 16 GB of memory in your PC.
Why do things half measure? 4 GB is the minimum memory I would run a 64 bit OS on, and have it work acceptably.
I would just buy 2 x 8 GB of PC3-12800 memory and have all the memory you'll ever need, and get it now while it is cheap.
Here is a link to a place where you can get good PC3-12800 memory cheap.
I defaulted the search to PC3-12800. You can refine the search by clicking on the memory size, etc on the left side of the page.
Read the reviews and get what makes the most sense to you.
http://www.newegg.com/Product/ProductList.aspx?Submit=ENE&N=100007609%20600000410&IsNodeId=1&name=DD...

I want to upgrade my current desktop PC 1030cq all in one graphics card to 1gb

i want to upgrade my current desktop PC 1030cq all in one graphics card to 1gb

RS, welcome to the forum.
Which of these computers is yours? We need this information to answer your questions correctly.
Signature:
HP TouchPad - 1.2 GHz; 1 GB memory; 32 GB storage; WebOS/CyanogenMod 11(Kit Kat)
HP 10 Plus; Android-Kit Kat; 1.0 GHz Allwinner A31 ARM Cortex A7 Quad Core Processor ; 2GB RAM Memory Long: 2 GB DDR3L SDRAM (1600MHz); 16GB disable eMMC 16GB v4.51
HP Omen; i7-4710QH; 8 GB memory; 256 GB San Disk SSD; Win 8.1
HP Photosmart 7520 AIO
++++++++++++++++++
**Click the Thumbs Up+ to say 'Thanks' and the 'Accept as Solution' if I have solved your problem.**
Intelligence is God given; Wisdom is the sum of our mistakes!
I am not an HP employee.

HP Envy 23-K002d all in one

Hi Guys
can we have an issue for this model HP Envy 23-K002d all in one. win8 H6N10AA#A2K
Problem is in the rigth side of LCD (menu bar) the touch is intermittent working + un-useual heat
i have 3 stocks unit with the same problem
already update bios firmware video driver even the sytem still same issue

Hi nomyar, welcome to the HP Forums. Unfortunately I am not sure I have any useful troubleshooting ideas. If you have the same behavior on 3 different units you should contact support for more options: HP Technical Support, North America 1-800-474-6836. For all other regions click here.
TwoPointOh
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the bottom to say “Thanks” for helping!

HP ENVY 4500 e-All-in-One Printer/Mac OS 10.6/can't scan multiple pages as single document/file

Mac OS X 10.6.8
HP Scan app 4.4.1
In the HP ENVY 4500 e-All-in-One Printer support page for scanning with a full feature driver installed. Under "How to scan a multi-page original into a single file for HP Scan software version 4.0. Everything is OK until after I've scanned the documents and clicked "Done". (Step # 6) & Click Send , click Folder , name your file, and then save the file to the computer.(Step # 7)
This is where I go wrong. I can't find the Format drop-down menu to complete Steps 8 & 9.
Click the Format drop-down menu, select Contents , and then check the box to Save all items to a single file .
Click Save .
This question was solved.
View Solution.

Hi MaWoo,
Thanks for your post and welcome to HP Forum.
Please make sure you select PDF or Searchable PDF as the Format. You should then find a box to check for "Combine into single document".
Best regards,
Mandy
Say "Thanks" by clicking the Thumb up in the post that helped you.
Please mark the post that solves your problem as "Accepted Solution"
Although I work for HP my posts and replies are my own

HT3669 HP ENVY 4500 e-All-in-One Version 3.2.1 does not work on iMac 20-inch, Mid 2007. Only recognizes scanner not USB printer.

HP ENVY 4500 e-All-in-One Version 3.2.1 does not work on iMac 20-inch, Mid 2007. Only recognizes scanner not USB printer.
I would like to print via the USB connection instead of wireless (the wireless does work, and the scanner works via USB).
I tried connecting the printer directly (via USB) to my MacBook Pro laptop and it worked just fine.
How can I make this printer work on my iMac?
I spent 4 hours on the phone with HP and we did every combination of installation of drivers ad nausum and their bottom line is that it is a Mac problem.
Any help would be appreciated. Will be sending this printer back to Amazon if I can't make it work on the USB.
I am open to questions or suggestions
Thanks,
Chet

After 4 hours on the phone with HP and another hour with Apple (Mavericks support) no real solution other than check everything (removed everything from Login Items, removed all HP software anywhere in the system reboot, reinstall printer) then when nothing worked for the 4500, did an OS Reinstall (boot with CMD+R).
The Mavericks support group did open an incident (# 542875311) and I will update it when I figure out how to find it on the system.
My feel is that the base problem is that somewhere between the HP-Inkjet-SW-OSX-Mavericks_v12.34.49-2 package and the Apple HP Printer software in the Library (version 2.16.1) the app for printing via the USP Port just does not get installed for the mid 2007 20 inch iMac. The scanner is recognized on the USB Port and the Printer works fine on Wi-Fi. I have too many devices to burden my home network with anothe device. Also, every time I put any HP Printer on Wi-Fi, my router (Netgear N600 WNDR3400 running 12 to 20 devices depending on who is home) gets wonky (but that's anothe story...).
Additionally, when I attach the HP Envy 4500 to my MacBook Pro (2010) it works perfect - print and scan via the USB prot and both functions show in the System Preferences - Printers and Scanners just as expected and just as the 3050 does.
Chet

New bought MSI AG240 2PE (non touch) all in one game pc working well

MSI AG240 2PE (non touch) all in one game pc working well. But its monitor's on screen display settings unreachable now from monitor's buttons. When İ first started the pc they were working normal. But a few hours later only working button was monitor's selector button between monitor shot down, HDMI in ,PC. When i try to press menu button it only shows volume shotting down on the screen and couldn't enter the menu settings. When i use monitor from hdmi in as TV, I still couldn't reach any menu settings and volume settings. Because of this, on hdmi in mode i couldn't hear voice from speakers of all in one pc. After turning pc mode, volume settings can be reachable from pc audio settings but not from monitor's buttons.Thanks for any idea and help.

Dear,
If this OS is form MSI, please find a notepad from the following route. C:\windows\system32\oobe\oem
You could find a notepad by the name of releasenote, please provide to us.
If this OS is installed by yourself, please provide detail information for this OS.
OS version
32bit or 64bit
For Win7 OS:
Please install MSI utility-WMIHOOK first.
http://www.msi.com/support/aio/AG240-2PE.html#down-utility&Win7 64
For Win8 OS:
Please install MSI utility-QuickSetting first.
http://www.msi.com/support/aio/AG240-2PE.html#down-utility&Win8 64
For Win8.1 OS:
Please install MSI utility-Gaming Control Center first.
http://www.msi.com/support/aio/AG240-2PE.html#down-utility&Win8.1 64
Thanks.

Add memory to a officejet 8620 all in one

I have an office jet pro 8620 all in one printer..... how do I add memory to it. I am getting fax memory full error messages when I try to send more than a 20 page fax.
Thank you.

Hi,
You cannot add a memory to the device, it include a standard size of memory.
First clear the fax log as following, then try sending the fax again:
1. From the printer control panel display, touch and slide your finger across the screen and then touch Setup.
2. Touch Fax Setup, and then touch Fax Tools.
3. Touch Clear Fax Log.
Now try sending the fax and check for any difference.
If the same persists click the Fax option and ensure the resolution being set as "Standard".
Shlomi
Say thanks by clicking the Kudos thumb up in the post.
If my post resolve your problem please mark it as an Accepted Solution

How to Upgrade RAM/HDD Lenovo C100, Lenovo All in One Nettop

Hi all,
Im newly bought Lenovo C100 All in One PC, pls click the link below for my PC:
I want to upgrade the it RAM fro 1GB to 2GB (add another 1GB), but I cant find the way to open the back... Me already un-srew all the srew available.... but it hard to open...im afraid that I will damage the PC body if force to open...
Should it have a special slot to ease adding RAM?
already googled, but still can find step by step or instruction to upgrade the RAM...
Pls help me I bought the RAM.... thanks

nobody done it before...?

HP Envy 5530 e-all-in-one Does Not Work With Mac

Just bought an HP Envy 5530 all-in-one. It does not print through Safari and possibly other Mac applications. Does not frame the page properly even with "print page" and prints slower than 1 page per minute, even with no background images. My old HP had no problem with Safari. Phone support tells me there is no driver or fix. So I will return the device. Seems crazy. I now see othr commenters saying it doesn't work with Mac. If HP's no longer works with major Mac applications, they will be returned in droves. Anyone know why or know of a fix?

I am having the same issue. Did you ever find a solution?

B550 touch all in one

I just bought a a refurbished all in one lenovo B550 touch. 8gb 1tb hdd. When I received the computer the bezel was broken on the right foot. The site I got the computer from doesn't have any more of this kind so I can't exchange it. It was to good of a deal to return. Where can I purchase a new bezel.

Hi Duekee,
Welcome to Lenovo Community Forums!
You can Contact Lenovo Part sale at
English
1-877-4-Lenovo, 1-877-453-6686 Press 3, 2, 1, when ask by the Voice Prompt
Let the Support Representative know what happen and for them to identify which part you need.
Regards
Solid Cruver

Win10 upgrade problem on LeNovo C50 30 All in One

I tried to upgrade my LeNovo C50 30 All in One, but got Microsoft message indicating incompatibility with NVIDIA GeForce 820A, though product was sold with free upgradeDownload on Lenovo website W10 upgrade for Intel and GeForce 820A but couldn't install them because of OS version Win 8.1.Could someone give me help on how to proceed.Thanks in advance

hi LordMichael091,
Welcome to the Lenovo Forums.
If you have the Lenovo® C225 (3079 or 3095) then this doesn't have a built-in bluetooth module as listed in this pdf data sheet. Otherwise, try to download Aida64 Extreme and post the bluetooth device here for us to verify the correct driver.
Here's a sample screenshot on how to identify a device using Aida64 Extreme:
Spoiler (Highlight to read)
Let me know your findings,
Cheers
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
Follow @LenovoForums on Twitter!

Envy 4500 e All-in-One - Still connects to network but won't talk to computers

I turned on my Envy 4500 the other day to print a paper for school, but it wouldn't print. It's connected to the same network as my computer, and I changed nothing, but now it simply won't cooperate. I've tried uninstalling and reinstalling the software, disabling my firewalls, restarting, running the Print and Scan doctor, resetting the printer to factory and reconfiguring the wireless settings, and nothing is helping. The Wi-Fi settings show that the connection is fine, but when I go to print wirelessly it shows the printer as offline. The issue is impacting all of the devices in my home that use the printer, including our Android phones, my Windows 7 desktop, and my wife's Windows 8.1 laptop.
I feel like I've done everything right, and it was working fine before, but for the life of me, my computer and my printer just won't talk to each other over the wi-fi. It works fine USB, but that's obviously not an ideal solution. Does anybody have any advice on this one?

Hello @NeapolitanSixth , and welcome to the HP Forums, I hope you enjoy your experience!
I see you're having connectivity issues. I would like to help!
I would recommend setting up a static IP on the printer:
Good luck and please let me know the results of your troubleshooting steps. Thank you for posting on the HP Forums!
Please click “Accept as Solution " if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the right to say “Thanks" for helping!
Jamieson
I work on behalf of HP
"Remember, I'm pulling for you, we're all in this together!" - Red Green.

HT3500 I have a MacBook Pro and an HP ENVY 110 SERIES All-In-One . I can't seem to get a network set up or either one to locate or connect to the other one.

I've spent hours, actually probably days, trying to do this but it's not working. I've had the ENVY since Nov
and have not been able to print - much less do anything else with it.
My internet is CLEAR wireless. I use the little USB 4G Mobil Modem. This new HP ENVY is also wireless.
I know I can't be online and print at the same time unless I get a router.
I also know that I can go offline and change the network pref to "airport" so I can print. Meaning I'll have to change
back and forth but for my uses, that's ok..at least for right now.
What I can't seem to get set-up correctly is my own local network.
I'm pretty sure it's suppose to be done using "Airport".
Obviously, I'm doing something wrong in establishing my network.
The printer is listed on my printer preferences and shown as "offline" "default". I assume that means the ENVY
is my default printer. Great! At least my Pro knows it's suppose to connect to the ENVY once everything's set-up correctly.
Now, if someone could just tell me exactly, step-by-step what to do to get that done....
I'd be soooo very happy!
Thank you!
Ricki

Well... no help was found here.. so I abandoned the wireless- ness of my printer. I bought a
small 10 port hub because only 2 USB ports really isn't enough with wireless mouse, wireless internet
and any kind of printer. I also bought a long USB cable. I now print--wired since this can be done
as an alternative to wireless with this printer. Because I don't want a cable "hanging around"
when the printer is not in use, I simple disconnect it and reconnect when I want to print.
It's a temporary solution others may find helpful as well. Apparently there's been a lot of
confusion and problems getting this printer set up wirelessly with our MacBooks.
Shame on HP for not helping us out!

UPGRADE MEMORY - HP ENVY Recline Touch All in One – 23-k300br

Similar Messages

Maybe you are looking for