Upgrade premiere project to cc 2014 with linked AE comp

Hello,
When I open an old premiere pjct, I'm asked to convert it to cc2014. No problem !
But when it opens, my AE comps on my timeline are "MEDIA PENDING" and not possible to open AE with the "edit original" command because it is grey
When I try to link the AE comp with "link media" command, Premiere crashes !!!!
Thanks for helping !

There is Always something that does not come over correct.
To avoid annoyences finish project in CC7 and start fresh in CC14.

Similar Messages

Can I upgrade FCP from 7 yrs.ago with my new comp purchase?

I bought the full out FCP in 2001. I am about to buy new mac but cannot drop $1000. Do upgrades work that far apart? I have the same situation for Photoshop too. I don't really want to buy the cheaper abbreviated versions. Thanks!

No worries. If you just check out the product webpage you'll see this note
The Final Cut Studio upgrade provides an upgrade path from Final Cut Studio 2, Final Cut Studio 1, Production Suite, or any prior version of Final Cut Pro. Academic and Not-For-Resale (NFR) versions are not eligible for upgrade.
The important bit for you is where it says +"The Final Cut Studio upgrade provides an upgrade path from ... any prior version of Final Cut Pro"+ so even though your standalone version of FCP2 (?) is getting long in the tooth, you can upgrade it to the full Final Cut Studio suite (FCP 7, Motion 4, SountrackPro 3, Color 1.5, Compressor 3.5 and DVD StudioPro 4) all for just USD 299. Pretty bloody awesome really

Premiere CC 2014: Message on loading project from older version: This project was last used with Mercury Playback Engine GPU acceleration (CUDA)...

After installing Adobe CC 2014 I have each time a message when loading an old Adobe pro project. Message:This project was last used with Mercury Playback Engine GPU acceleration (CUDA), which is either not available or not certified on this system. Mercury Playback software will be used. I have very recent HP Zbook 15 with a NVIDIA Quadro K2100M. At webinar today it was explained how to solve this, but sound was not understandable at my machine at that moment. Help? What need I to do.

Problem is solved since yesterday via Adobe helpdesk. It appeared that the newest driver for the NVIDIA were note present. So after downloading the new drivers it work. But I think Adobe should mention those issues when they launch new versions of Adobe CC like in June.

CS6 Audition file not linked with Premiere Project

I'm a newb to Audtion and I'm using CS6 Master Suite on a Windows 7 machine.
When in Premiere and I "Edit in Audtition" , then "Save" my edit in Audition the new (edited) audio is not reflected in the Premiere project. Instead I find it in a folder called "Adobe Audition Interchange". Shouldn't it automatically replace the Audio file in the Premiere project it originated from?
Is there a setting I'm missing in Audition? Should I be saving the File somewhere else?
When I've worked with Soundbooth in earlier versions of Premiere the edited version was immediately inserted into the Premiere Project.
Thanks for any input

Hank
Please try this conventional route from the Elements Organizer 11 Slideshow Editor slideshow to opening that slideshow in Premiere Elements 11 project.
In the Elements Organizer 11 Slideshow Editor, go to Output and select Edit with Premiere Elements Editor. That command will put the slideshow in a video format on the Timeline (.psess file) and at the same time put a folder with the project assets as well as a copy of the .psess in Project Assets.
If you need to do additional edits of the .psess (video) on the Timeline, then you right click the Timeline .psess file, and select Break Apart Elements Organizer Slideshow to do just that.
If the slideshow opens in Premiere Elements 11 Editor with black borders, then you set the Premiere Elements project preset beforehand manually (File Menu/New/Project) and then Output the slideshow from the Elements Organizer slideshow editor.
Have you been there and done that? If not, please give it a try and let us know the outcome.
Thanks.
ATR

Can't upgrade Premiere from 2014 to 2014.1 on Windows 8.1? It says it's 'up to date'.

I can't upgrade Premiere from 2014 to 2014.1 on Windows 8.1? It says it's 'up to date'. I tried to uninstall from 'Control Panel' and reinstall. It didn't help. I didn't have that problem on Mac. Please help. My Premiere projects from Mac are 2014.1 and can't be opened on Windows with older Premier.

CC desktop lists applications as "Up to Date" when they are not
-http://helpx.adobe.com/creative-cloud/kb/aam-lists-removed-apps-date.html
-and added step https://forums.adobe.com/thread/1529654

Opening projects in CC 2014.2 created in previous version of premiere cc 2014

Hello,
I just upgraded premiere cc 2014 to premiere cc 2014.2. When I try to open my project created in the last version of cc 2014 I am instructed to convert the project created in the previous version of premiere so it can be opened in premiere cc 2014.2 When I convert the project it will open in cc 2014.2 but the sequences don't come with it. I need to have access to the original sequence so I don't have to edit the project again. Thanks for your help.
Bill Martz

Rather than opening directly, try importing the project via the Media Browser Window.
Much more efficient as you'll have more options.

Moved Premiere Elements 10 project Error: "Project is not compatible with current version of Premiere Elements"

After moving an entire client folder from an external hard drive to an internal one, the client's video, created in adobe premiere elements 10, will no longer open in adobe premiere elements 10. It appears to be loading the project, and instead of completing, the following error message is displayed: "The project is not compatible with current version of Premiere Elements."
The same thing occurs when attempting to open the archive files.
New projects, and unmoved projects behave properly.
Moved projects receive this error.
I'm running Windows 7 Home Premium SP1 on a solid state drive (SSD) (c:/), where premiere elements is installed
My documents, including the project I need to work with are on my "storage" drive (HDD). it is (f:/)

txnoda
Archiving Aspects of this.....
First let clear the matter of the "archiving" as a life saver.... We do not appear to be on the same wave length.
a. I am talking about File Menu/Project Archiver with its Archive project and Copy project options. This feature is a safety net to save you when you
inadvertently disconnect source media from the project file. With the Archive option (Trimmed Folder result), you get saved to the computer hard drive (safe keeping) a copy of the project file plus copies of the media that were taken to the Timeline. With the Copy option (Copied Folder result), you get copy of the project files plus copies of much more.
b. Instead, you appear to be talking about "archiving" in the context of AutoSaves. AutoSaves are saved snapshots of the project at various phases of the edit. They suffer from the same shortcomings of the original project that has been disconnected from its source media.
When you import media into a project, all you get are copies of the originals in the project. But, those copies need to trace back to originals at the locations where they were when first imported into the project. Moving, renaming, deleting files/folders that went into the project after the project save close leads to some very time consuming messy situations.
What to do....
If you can, put everything back the way it was. If not.....
Let me emphasis some factors..
You wrote
After moving an entire client folder from an external hard drive to an internal one, the client's video, created in adobe premiere elements 10, will no longer open in adobe premiere elements 10. It appears to be loading the project, and instead of completing, the following error message is displayed: "The project is not compatible with current version of Premiere Elements."
Here you mention specifically "client's video". Later you detail with .mod files converted to .avi. What kind of .avi? If you have converted to AVCHD.avi or H.264.avi, they have been found not to be compatible with Premiere Elements. You should not be able to import them into any new or old project.
From what you described, I am envisioning
"Video" Folder
which contains 2 folders named
"Timestamped Folder" with .avi files
and
"DVD" Folder with the project file (project.prel)
The project file has many files generated automatically in the course of it workflow. Where do you have them going?
(See Premiere Elements 10 Edit Menu/Preferences/Scratch Discs). If you have the Scratch Discs directed
"Same As Project", then we would expect all those files to be going to the DVD Folder in the above scenario.
If we could open the project and get greeted with some "Where is the file.....?" messages, that might give us some hope.
But that is not the case.
Consequently from what you have said, I am suggesting that the path of least resistance is try to recreate the "before".
Please review and consider.
ATR
Add On...Not sure if it will assist in the matter, but the following is the link to Adobe's document related to troubleshooting
damaged projects.
Troubleshoot a damaged project file | Adobe Premiere Elements

Dynamic Link for Premiere and After Effects CS4 with Titles

I've created a Rolling Title in Premiere Pro CS4. I'd like to create a Dynamic Link to bring the title into After Effects CS4 to add effects that will show up in Premiere. I've watched a few video tutorials on Dynamic Link and read the documentation and tried a variety of permutations but can't seem to get this done.
Also saw something in these forums about problems using Dynamic Link with Titles (as opposed to regular clip??)
And something about Premiere and After Effects projects being saved together ??in same folder - is that correct?
So, could someone explain if this can be done and the right way to do it?
Thanks

Thanks Mylenium - appreciate the quick and focused reply.
I would like to keep the benefits of the Premiere Pro Titler (to play with the length of time by stretching or squashing the Title block on the timeline; to type in time to stay on screen at end; ease in and out etc . . .). If I do render out a png / tiff / or psd sequence with alpha, and bring that into AFX to play with. Will I still retain the ability to use the Titler features in Premire Pro, or do I essentially have to convert it to 'regular footage' on reimport as opposed to a 'Title?"
Thanks

Multi mask layers working with linked premiere sequence

How do I make a new grade layer when my sequence is linked to premiere project. I want to make two masks. I am new to speedgrade. I can't go to the timeline tab or press the color buttons, forth and fifth button above timeline, they are grayed out.
Thanks,
jim

There's been numerous discussions about adding a grading-layer option back into the Direct Link Sg workflow. So it's been talked about ... but not implemented yet. As someone who's always willin' to help out by submitting feature requests, I urge you to go ahead and file wishform requests for anything your heart desires! They do "listen" to these ... although they can't always for one reason or another implement things we ask for or at least, as fast as we want them.
Amazingly, they don't get irritated with those of us who file post after post. I went down to NAB this March, and was standing watching a Speedgrade staffer demo the up & coming (& now released) CC2014 version, with the new scopes. I'd put in I don't know how many requests ... some general, some very specific ... on this, and had jumped into quite a number of forum discussions on the subject. Especially if a staffer was involved. Wasn't sure how my reception would work out, you know?
However, the staffer involved was demo'ing away, and in a pause while showing the to-be-released nifty scopes, I did mention that wow, those were nice ... he turned and looked at me, then my name tag (which had my unused first name rather than my used middle name on account of NAB officialdom) ... started to look back to his demo-ee, and then turned with a big smile & said "You must be Neil!" and launched into a discussion of my numerous posts ... happily.
I can assure you, he'd read every flippin' one of my ahem ... multiple ... requests, and was still happy to see me. I was quite charmed, actually ... so wish away!
Neil

Will upgrading from Snow Leopard to Mountain Lion create problems within Premiere projects?

I'm looking at the probability of upgrading from Mac OSX 10.6 to 10.8 (Mountain Lion). I have to if I want to install or upgrade just about anything at this point.
I was hoping to wait until the latest Premiere project was finished to avoid creating possible discrepancies between how the project plays back before and after the upgrade. I'll skip the details and just say that it might be best if I do the upgrade now and install a new GPU to help with the massive amounts of rendering/playback needed. Will upgrading from Snow Leopard to Mountain Lion cause any likely problems? No other Adobe apps are involved with this project.
I'm running a Mac Pro 5,1 and Adobe CS6. I have two separate clone drives of my current boot disk as well as a Time Machine back up. So I can go back if I really need to. I'll also make sure the project is saved manually elsewhere.
Thanks for any input!

I'm Win, not Mac, but I do have a couple saved messages
Mac 10.8.3 Bug w/Encore and BluRay http://forums.adobe.com/thread/1198709
-create folder not ISO http://forums.adobe.com/thread/1216127

Running Premiere PrO cs6. After upgrading to Yosemite 10.10.2 Adobe Premiere wont run, come up with system error and shuts down. Any one else had this issue?

Running Premiere PrO cs6. After upgrading to Yosemite 10.10.2 Adobe Premiere wont run, come up with system error and shuts down. Any one else had this issue?

can try this Premiere Pro CC, CC 2014, or 2014.1 freezing on startup or crashing while working (Mac OS X 10.9, and later)

Have to re install elements 11 & premiere elements 11. cause problem with upgrade windows 8.0 to 8.1

have to re install elements 11 & premiere elements 11. cause: problem with upgrade windows 8.0 to 8.1. Lost all software and data.
how to re install elements11. (downloads purchased in your store 2013-05)
[email protected]

have to re install elements 11 & premiere elements 11. cause: problem with upgrade windows 8.0 to 8.1. Lost all software and data.
how to re install elements11. (downloads purchased in your store 2013-05)
[email protected]

E-mailed File "The project is not compatible with the current version of Premiere Elements"

I have Version 12 on a PC.
My friend has Version 12 on a MAC.
E-mailed him a file.
He could not open, and a message box popped up: "The project is not compatible with the current version of Premiere Elements".
Could someone kindly asssit, this does not make sense as to why it is not opening, since both computers are using the same version.
Thank you,
Ben
[email protected]

Ben
As said, you cannot open a Premiere Elements 12 Windows project file (named project.prel) in Premiere Elements 12 Mac. And vice versa.
Details
Given that your source is imported into a Premiere Elements 12 Windows project and placed on its Timeline for edit. That Timeline content cannot get out of the program without export. Export choices are found in the Publish+Share section of the program.
In your case, you want to take the Timeline content of Premiere Elements 12 Windows and export it to a format with which Premiere Elements 12 Mac supports (look at .mov or .mp4). In this regard, in Premiere Elements 12 Windows look at Publish+Share/Computer/AVCHD and one of its .mp4 presets or Publish+Share/Computer/QuickTime and one of its .mov presets (suggested H.264 video codec).
Those exports will be saved to the computer hard drive of the Windows computer. Then email the .mov or .mp4 file (beforehand, check the
email carrier's specification for that). Depending on the circumstances, you could transfer the file to a USB Flash Drive for the sharing.
Remember, sharing the .mov and .mp4 involves "whole" video. Depending on the edits, the video may need to be cut by the receipent. You are not dealing with the project file. The story would be different if this sharing and editing is done from Premiere Elements Windows to Premiere Elements Windows. And, if that were the case, then you would have to assure that the source media of the project traveled with the project file. (See Project Archiver feature of the program.)
That is a rough sketch of the situation. I can fine tune the details further if necessary.
Please review and consider.
Thanks.
ATR

Link Prelude and Premiere? (Update Premiere Projects)

Hello,
So, I really enjoy commenting and marking in Prelude as the user interface and the whole handling is really simple and you can just concentrate on reviewing your footage.
After I export subclips into Premiere, is there a simple way to go back to Prelude, make new subclips, comments etc. and update these in Premiere?
Or do I have to "sent them to Premiere" again?
Would be a cool feature if I could go back to Prelude any time, update comments and have them in Premiere automatically!
YaNuo

Comments yes, subclips no.
Comments are saved in XMP and Premiere Pro and Prelude both read from and write to the same place for each asset, so if you update a comment marker in Premiere Pro you'll see that update in Prelude and if you update a comment marker in Prelude you'll see that change in Premiere Pro.
Not so with Subclips, however, since at the time you Send to Premiere Pro the subclip marker that Prelude writes as a kind of marker in XMP is converted to a Premiere Pro subclip that lives in the Premiere Pro .proproj project file. It is a great idea to have subclips maintain a more "live" relationship like comment markers do, I encourage you to file a Feature Request. http://adobe.com/go/wish

Can Premiere Pro 5.5 work with Several AE projects on a Network?

Hi All:
First time posting. Long time Final Cut user looking to migrate.
We have 3 licenses of Production Premium, on a shared network of Fiber.
We would love to have one Premiere project open and send shots to different after effects projects so we can have 3 people working on comps at the same time and then send those back to Premier. Is this even possible?
This would be an incredible workflow for us.
So far we have had no luck, Premiere sees all our different After Effects projects as the same one.
Thanks in advance for the response.
Alex Neuman

From what I have read (and saved a few links) PPro does not work on a network
Win Server is NOT supported http://forums.adobe.com/thread/851602?tstart=0
Not in a Network environment http://forums.adobe.com/thread/771151?tstart=0
-and not on a "domain" http://forums.adobe.com/thread/858977?tstart=0
The best you can do is keep your "master" copy on the network server... use check out/in software to manage who does what... copy the project to the local hard drive and do the work... then copy back and check in on the server

Upgrade premiere project to cc 2014 with linked AE comp

Similar Messages

Maybe you are looking for