Upgrade summary report or transaction

Hello,
We have upgraded our 4.6C to ECC 6.0.
I would to know if there is any transactions or reports for giving us an analysis of this upgrade.
For example, we want to know all steps with their durations....
Thank you for your help.
Mikee.

Hi,
For earlier releases  report RSUPGSUM  was run SE38.
For ECC6 onward  you have a link 'Upgade Evaluation' in http://<hostname>:4239/ua....
PS : Make sure you Upgrade UaServer is running.
Cheers
Shaji

Similar Messages

  • AP PO Reconcilliation Summary Report

    Hi,
    I have some confusion in AP PO Accraul Reconcilliation Summary Report. even after write off the transactions are still showing the report. is it the usual behaviour of the report?
    can anybody help me in this regard.
    Rgds,
    Abdul Wasi

    Please execute tables S011 and S012 in Tcode SE16.
    You can get the summary of purchase orders for the given date range at different levels like plant, pur.org., pur.grp., vendor, etc...
    regards,
    C. ASHOK RAJ

  • F.01 Summary Report for ALV grid

    Hi all,
    We have defined our financial statement version (FSV). We have been running tests in transaction F.01, when we choose ALV Tree output the transaction works perfectly.
    However, if we choose ALV grid output and then choose "1" in the Summary Report field (highest summary level, only main points of Balance sheet P&L statement should be displayed) the output is not summarized at all.
    In short, no matter what number we put in the Summary Report field we always get the same output.
    What needs to be done in order to be able to use this summarization control?
    Any help will be appreciated.
    Juan
    Edited by: Juan Carlos Mier Giraud on Jul 8, 2008 4:50 PM

    Renata,
    Thanks for your help. I am going to need a bit of help to develop the solutions described in the notes you pointed out.
    Have you successfully created a summarization for ALV grid output?
    I just want to know if it is worthy to devote time to it or just use classic list or ALV tree when appropiate.
    Regards

  • Summary reports

    Good day!
    Kindly help me regarding these transactions. We need a summary report for Goods Receipt (GR), Invoice Receipts (IR) and Goods Issuances (GI). Thank you. Are there any available list displays or tables (in SE16) for the stated transactions?
    Thank you.

    hi
    u can see the gr and iv in me80fn with po histry mode
    for the goods issue use mb51 with the issue movement type
    u can see the goods movement in mb51
    regards
    kunal
    Edited by: kunal ingale on Sep 11, 2008 12:53 PM

  • Summary Report by Cost Element/Cost Center.

    Hi SAP Experts,
    Could you please help me in generating the following report.
    I/Customer need the cost center + the cost element + the dollars + the quantity (SKF) + the currency - in the same report.
    Could you please tell me from which table I need to retrieve the above fields.
    Thanks for all your help in advance
    Regards,
    Rajkumar.

    Hi Akhilesh,
    Thanks for your help. Your answer helped me very much.
    The customer wants summary report by Cost Element i.e
    SKFActual(SKF Qty)Cost CenterCostElementDollars+Report Currency.
    First 2 fields (SKF+Actual - SKF Qty) we got from S_ALR_87013611 report. Then we double clicked on SKF then it will take to KSB1 transaction code(as said by you) there we got the rest of the fields.
    Currently we are developing the same Custom Report but it should show by summary i.e by Cost Element.
    Could you please tell me what Tables and Data types we need to refer?
    Again, I wish to hear from you soon.
    Thanking you,
    Regards,
    Raj

  • Evaluation/Summary Report

    I am using the 360 Degree Feedback template and would like to view the Evaluation/Summary Report on each individual.  It appears the report bleeds everyone's together - so I do not know who is best and who is worst etc.  Is this a feature in the Upgraded version?
    thanks.

    Sorry I don't quite understand. What do you mean by "report bleeds everyone's together"? Can you provide more detail or a screenshot.
    Thanks,
    Randy

  • Agent State Summary Report - Total login duration abnormal

    Hi everyone,
    We just upgrade our call center to UCCX 8.0(2). Everything seem to work fine except we found something strange in Historical Report "Agent State Summary". Agents are working in 8 hours shift but in the Total Logged-in Time in Agent State Summary report show up to 20 hours (Time spend in Not Ready state up to more than 10 hours). This is happened to some agents only.
    We have checked with the agents and they confirmed that they have loggout properly after working shift (when they finish, they logout of CAD and then logout of Extension Mobility).
    We have checked "Agent State Detail" report, and found strange behavior (for thoes agents that have abnormal Not Ready state and long duration of Total Logged-in Time) as - after that agent Logout, they have change to Not Ready state with reason code 32759 (The system issues this reason code if the agent's phone crashes and that agent is placed in the unavailable state).
    What caused this to happen? Agent shouldn't have any state after they logout.
    Any idea?
    Thanks.

    Aaron
    Just one more thing. for example SLA on the CSQ  is set to 10 secs
    Call is offered to the agent via Resource commend but the agent does not answer so  RONA (15sec) is invoked and the call is re-queue - Does this impact SLA?
    No agents are available so the call is queued with IVR- Does this impact SLA ?
    Basically I guess the   SLA  is impacted if the call is either ringing on an agents  phone after the 10 Sec SLA but answered or returned to queue if the RONA is say 15 secs - either way  the SLA is impacted is this correct?
    Sorry for the "obvious " question but customer stated that she was informed the SLA is only impacted on "ringing" time on the agents phone and not if the call is queuing, listen  to on hold while queuing 

  • Urgent ,complaint summary report  ??

    Hi Gurus,
    "The new complaint summary report is missing Location from the Ship-to Name/Location and Sold-to Name/Location fields" this is the problem.
    Please let me know how to go abt this .. which tcodes do I need to refer.. do I need to look at CRMD_ORDER
    if yes then how do I look at the report ??
    I'll reward points for this ..

    Hi Ravi,
    Thanks for your reply ..
    Is this the right site .. I get an error message ...
    could you please send all the possible CRM Forum sites
    were I can place query.. to it...
    Rgds,
    Aryan

  • PURCHASE & SALE SUMMARY REPORT

    hi....
    i want T-codes for getting PURCHASE & SALE SUMMARY REPORT ALONG WITH VENDOR & CUSTOMER WISE ALSO.
    Thanks & Regards
    Rekha Sharma

    hi...
    by these t.code i not found any result pls do needful.
    i want vendorwise/customerswise purchase/sale summry. It should show Purchase/Sale Qty. & amount.
    Thanks & Regards
    Rekha sharma

  • At new statement for Summary report

    Hi,
      I have made a vendor balance report having debit and credit entry in on eintrenal table IT_BSIK, with all line item detail in another table IT_TAB1  i want to make summry report by adding all the amount of of line item it is also working fine  but i wan tto change the summary report i want summary for debit and credit entery seperate How to do it find Below the code part for summary how to use  AT NEW SHKZG then append the IT_TAB1
    find the code here.
    **********************summarised part
       loop at it_lfnr.
          Clear : VTOTBAL, vNtdue, vDue, vDue0, vDue31, vDue61, vDue91,V1TOTBAL.
          loop at it_bsik where lifnr = it_lfnr-lifnr.
              IT_TAB1-LIFNR = IT_BSIK-LIFNR.
              IT_TAB1-BUKRS = IT_BSIK-BUKRS.
              IT_TAB1-SAKNR = IT_BSIK-SAKNR.
              IT_tab1-NAME1 = IT_bsik-NAME1.
             ADD IT_BSIK-dmbtr TO V1TOTBAL.
             move V1TOTBAL TO IT_TAB1-dmBTR.
             ADD IT_BSIK-WRBTR TO VTOTBAL.
             move VTOTBAL TO IT_TAB1-WRBTR.
             MOVE IT_BSIK-WAERS TO IT_TAB1-WAERS.
             ADD IT_BSIK-NTDUE TO VNTDUE.
             move VNTDUE TO IT_TAB1-NTDUE.
             ADD IT_BSIK-DUE TO VDUE.
             move VDUE TO IT_TAB1-DUE.
             ADD IT_BSIK-DUE0 TO VDUE0.
             move VDUE0 TO IT_TAB1-DUE0.
             ADD IT_BSIK-DUE31 TO VDUE31.
             move VDUE31 TO IT_TAB1-DUE31.
             ADD IT_BSIK-DUE61 TO VDUE61.
             move VDUE61 TO IT_TAB1-DUE61.
             ADD IT_BSIK-DUE91 TO VDUE91.
             move VDUE91 TO IT_TAB1-DUE91.
           endloop.
            append it_tab1.
       endloop.
    ***********************************end of summarised vendor part ***************************

    Hi,
    loop at it_bsik where lifnr = it_lfnr-lifnr.
    if it_bsik-SHKZG eq 'Debit.
       add all your fields to table itab.
    else.
       add all your fields to table itab1.
    endif.
    endloop.
    This way you will get debit data in table itab and credit data in itab1.
    Then you can use  At new lifnr for both tables separately and you will be able to sum it separately.
    Hope its clear.
    Thanks,
    Archana

  • Standard Report or Transaction for Outstanding Purchased Materials?

    Hello,
    Is there a report or transaction that could be used to see a list of all pending purchased material requirements with requirement date?
    So, pending Purchase Requisitions and Purchase Orders with a required delivery date?  We want to create shortage lists for manufacturing.
    (think like COOIS where you can see planned and production orders, but for purchased parts)
    Thanks very much,
    Timothy

    Hi Ramagiri,
    Thanks so much for your help.  These are the two transactions I was trying to use... unfortunately I ran into a couple of problems...
    I tried selecting only specific WBS elements in ME2L using the dynamic selection, and it didn't return any documents (I know this is incorrect)... so I ran it without the dynamic selection and just applied a filter, which is ok.
    However, I can't find the MRP requirement date anywhere in this report, which is the main point - we are trying to find PO's that are later than MRP requirements.  I can see the delivery date only if I open each PO from the results of ME2L search.  Did I explain that problem ok?
    Thanks again,
    Timothy

  • Stock summary report

    hi
    i am doing stock summary report
    i am checking the data with mc.9 standard report
    the total amount for particular month is not tallying with standard one.
    data is coming with all the materials and with opening nd closing balances...
    but it is taking the stock amount with inclusive of all taxes. i am using the field mseg-dmbtr.
    but i need the material stock amount without taxes.
    i tried with mbew table, but i didn't get closing stock amount.
    values is there correct value in mbew but i am not able to get the correct value..
    tell me anyother tables or give me any soln....
    thanks nd regards
    vidya

    Go through this......
    *& Report  Z_OPEN_CLOSE                                                *
    REPORT  Z_OPEN_CLOSE MESSAGE-ID YW2 LINE-SIZE 231 LINE-COUNT 45
    NO STANDARD PAGE HEADING.
    Type Declaration *
    TYPE-POOLS SLIS.
    Tables *
    TABLES: MKPF, " Material Document: Header Data
            MSEG, " Material Document: Item Data
            MARA,
            MARD,
            S031,
            EKKO,
            EKPO,
            LIKP,
            MAKT,
            J_1IWRKCUS,
            T001W,
            WB2_V_MKPF_MSEG2,
            MMIM_REP_PRINT,
            YW2_STKMOVEMENTS,
            YPLNT,
            MARDH.
    Internal Tables *
    DATA: I_WERKS LIKE J_1IWRKCUS OCCURS 0 WITH HEADER LINE.
    DATA: BEGIN OF I_YPLNT OCCURS 0,
             PPLNT LIKE YPLNT-PPLNT,
             WPLNT LIKE YPLNT-WPLNT,
          END OF I_YPLNT.
    DATA: BEGIN OF I_MKPF OCCURS 0,
            MBLNR LIKE MKPF-MBLNR,
            MJAHR LIKE MKPF-MJAHR,
            BUDAT LIKE MKPF-BUDAT,
            VGART LIKE MKPF-VGART,
            BWART LIKE MSEG-BWART,
            MATNR LIKE MSEG-MATNR,
            WERKS LIKE MSEG-WERKS,
            LGORT LIKE MSEG-LGORT,
            MENGE LIKE MSEG-MENGE,
            MEINS LIKE MSEG-MEINS,
            KUNNR LIKE MSEG-KUNNR,
            ZEILE LIKE MSEG-ZEILE,
            XAUTO LIKE MSEG-XAUTO,
            SHKZG LIKE MSEG-SHKZG,
            MATNR1 LIKE MSEG-MATNR,
          END OF I_MKPF.
    DATA: BEGIN OF I_MARDH OCCURS 0,
           WERKS LIKE MARDH-WERKS,
           MEINS LIKE MARA-MEINS,
           MATNR LIKE MARDH-MATNR,
           LGORT LIKE MARDH-LGORT,
           LABST LIKE MARDH-LABST,
           LFGJA LIKE MARDH-LFGJA, "Added -MB
           LFMON LIKE MARDH-LFMON, "Added -MB
           PERIO(6),
           INSME LIKE MARDH-LABST,
           EINME LIKE MARDH-LABST,
           SPEME LIKE MARDH-LABST,
           RETME LIKE MARDH-LABST,
           O_STK LIKE MARDH-LABST, " Opening Stock
           C_STK LIKE MARDH-LABST, " Closing Stock
          END OF I_MARDH.
    DATA: BEGIN OF I_MARD OCCURS 0,
           WERKS LIKE MARD-WERKS,
           MATNR LIKE MARD-MATNR,
           LGORT LIKE MARD-LGORT,
           LABST LIKE MARD-LABST,
           INSME LIKE MARD-LABST,
           MEINS LIKE MARA-MEINS,
           EINME LIKE MARD-LABST,
           SPEME LIKE MARD-LABST,
           RETME LIKE MARD-LABST,
          END OF I_MARD.
    DATA: I_MARD1 LIKE I_MARD OCCURS 0 WITH HEADER LINE.
    DATA: I_MARDH1 LIKE I_MARDH OCCURS 0 WITH HEADER LINE.
    DATA: BEGIN OF I_MKPF1 OCCURS 0,
            MBLNR LIKE MKPF-MBLNR,
            WERKS LIKE MSEG-WERKS,
            MATNR LIKE MSEG-MATNR,
            BUDAT LIKE MKPF-BUDAT,
            BWART LIKE MSEG-BWART,
            MJAHR LIKE MKPF-MJAHR,
            VGART LIKE MKPF-VGART,
            LGORT LIKE MSEG-LGORT,
            MENGE LIKE MSEG-MENGE,
            MEINS LIKE MSEG-MEINS,
            XAUTO LIKE MSEG-XAUTO,
            SHKZG LIKE MSEG-SHKZG,
          END OF I_MKPF1.
    DATA: BEGIN OF I_MKPF2 OCCURS 0,
           WERKS LIKE MSEG-WERKS,
           MATNR LIKE MSEG-MATNR,
           BUDAT LIKE MKPF-BUDAT,
           BWART LIKE MSEG-BWART,
           MJAHR LIKE MKPF-MJAHR,
           VGART LIKE MKPF-VGART,
           LGORT LIKE MSEG-LGORT,
           MENGE LIKE MSEG-MENGE,
           MEINS LIKE MSEG-MEINS,
           XAUTO LIKE MSEG-XAUTO,
         END OF I_MKPF2.
    DATA: BEGIN OF I_FINAL5 OCCURS 0,
           WERKS LIKE MSEG-WERKS, " Plant
           MATNR LIKE MSEG-MATNR, " Material
           LGORT LIKE MSEG-LGORT, " Storage Location
           BUDAT LIKE MKPF-BUDAT, " Posting Date
           MTART LIKE MARA-MTART, " Material Type
           SPMON LIKE S031-SPMON, " Month
           MAKTX LIKE MAKT-MAKTX, " Description
    meins(3), " UOM
            MEINS LIKE MSEG-MEINS,
            O_STK LIKE MARDH-LABST, " opening stock
            TRECEP LIKE MARDH-LABST, " total receipts
            PRODU LIKE MARDH-LABST, " Net Receipts - Production
            RECEP LIKE MARDH-LABST, " Net Receipts - Receipts
            SAL_RET LIKE MARDH-LABST, " Net Receipts - Sales Return
            TDISP LIKE MARDH-LABST, " total dispatches
            CUSTMR LIKE MARDH-LABST, " Net Dispatches - Customers
            OPLANT LIKE MARDH-LABST, " Net Dispatches - To Other Plant
            TLOSS LIKE MARDH-LABST, " Total Loss
            TRLOSS LIKE MARDH-LABST, " Transit Loss
            WHLOSS LIKE MARDH-LABST, " Warehouse Loss
            C_STK LIKE MARDH-LABST, " Closing Stock
            TRFSTK LIKE MARDH-LABST, "Transfer stock
            MENGE LIKE MSEG-MENGE,
            OTHADJ LIKE MARDH-LABST,
          END OF I_FINAL5.
    DATA: BEGIN OF I_FINAL OCCURS 0,
            WERKS LIKE MSEG-WERKS, " Plant
            MATNR LIKE MSEG-MATNR, " Material
            BUDAT LIKE MKPF-BUDAT, " Posting Date
            MTART LIKE MARA-MTART, " Material Type
            SPMON LIKE S031-SPMON, " Month
            MAKTX LIKE MAKT-MAKTX, " Description
    meins(3), " UOM
            MEINS LIKE MSEG-MEINS,
            O_STK LIKE MARDH-LABST, " opening stock
            TRECEP LIKE MARDH-LABST, " total receipts
            PRODU LIKE MARDH-LABST, " Net Receipts - Production
            RECEP LIKE MARDH-LABST, " Net Receipts - Receipts
            SAL_RET LIKE MARDH-LABST, " Net Receipts - Sales Return
            TDISP LIKE MARDH-LABST, " total dispatches
            CUSTMR LIKE MARDH-LABST, " Net Dispatches - Customers
            OPLANT LIKE MARDH-LABST, " Net Dispatches - To Other Plant
            TRFSTK LIKE MARDH-LABST, "Material Transfer stock
            TRLOSS LIKE MARDH-LABST, " Transit Loss
            WHLOSS LIKE MARDH-LABST, " Warehouse Loss
            TLOSS LIKE MARDH-LABST, " Total Loss
            C_STK LIKE MARDH-LABST, " Closing Stock
            OTHADJ LIKE MARDH-LABST,
           END OF I_FINAL.
    DATA: I_FINAL1 LIKE I_FINAL OCCURS 0 WITH HEADER LINE.
    DATA: BEGIN OF I_FINAL_TEMP OCCURS 0,
            WERKS LIKE MSEG-WERKS, " Plant
            MATNR LIKE MSEG-MATNR, " Material
            MTART LIKE MARA-MTART, " Material Type
            MAKTX LIKE MAKT-MAKTX, " Description
            MEINS LIKE MSEG-MEINS,
            O_STK LIKE MARDH-LABST, " opening stock
            TRECEP LIKE MARDH-LABST, " total receipts
            PRODU LIKE MARDH-LABST, " Net Receipts - Production
            RECEP LIKE MARDH-LABST, " Net Receipts - Receipts
            SAL_RET LIKE MARDH-LABST, " Net Receipts - Sales Return
            TDISP LIKE MARDH-LABST, " total dispatches
            CUSTMR LIKE MARDH-LABST, " Net Dispatches - Customers
            OPLANT LIKE MARDH-LABST, " Net Dispatches - To Other Plant
            TRFSTK LIKE MARDH-LABST, "Material Transfer stock
            TRLOSS LIKE MARDH-LABST, " Transit Loss
            WHLOSS LIKE MARDH-LABST, " Warehouse Loss
            TLOSS LIKE MARDH-LABST, " Total Loss
            C_STK LIKE MARDH-LABST, " Closing Stock
            OTHADJ LIKE MARDH-LABST,
          END OF I_FINAL_TEMP.
    For Materials
    DATA: BEGIN OF I_MARA OCCURS 0,
           MATNR TYPE MARA-MATNR,
           MTART TYPE MARA-MTART,
           MEINS LIKE MARA-MEINS,
           LABST TYPE MARD-LABST,
           MAKTX LIKE MAKT-MAKTX,
          END OF I_MARA.
    DATA: BEGIN OF I_STKMVMNTS OCCURS 0,
           BWART LIKE MSEG-BWART,
           SHKZG LIKE MSEG-SHKZG,
           VZBEW LIKE YW2_STKMOVEMENTS-VZBEW,
          END OF I_STKMVMNTS.
    DATA: BEGIN OF I_FINALT OCCURS 0,
           WERKS LIKE MSEG-WERKS, " Plant
           MATNR LIKE MSEG-MATNR, " Material
           BUDAT LIKE MKPF-BUDAT, " Posting Date
           MTART LIKE MARA-MTART, " Material Type
           SPMON LIKE S031-SPMON, " Month
           MAKTX LIKE MAKT-MAKTX, " Description
    meins(3), " UOM
           MEINS LIKE MSEG-MEINS,
           O_STK LIKE MARDH-LABST, " opening stock
           TRECEP LIKE MARDH-LABST, " total receipts
           PRODU LIKE MARDH-LABST, " Net Receipts - Production
           RECEP LIKE MARDH-LABST, " Net Receipts - Receipts
           SAL_RET LIKE MARDH-LABST, " Net Receipts - Sales Return
           TDISP LIKE MARDH-LABST, " total dispatches
           CUSTMR LIKE MARDH-LABST, " Net Dispatches - Customers
           OPLANT LIKE MARDH-LABST, " Net Dispatches - To Other Plant
           TRFSTK LIKE MARDH-LABST, "Material Transfer stock
           TRLOSS LIKE MARDH-LABST, " Transit Loss
           WHLOSS LIKE MARDH-LABST, " Warehouse Loss
           TLOSS LIKE MARDH-LABST, " Total Loss
           C_STK LIKE MARDH-LABST, " Closing Stock
           OTHADJ LIKE MARDH-LABST,
           MONTH(8) ,
          END OF I_FINALT.
    DATA: IMKPFT LIKE I_MKPF OCCURS 0 WITH HEADER LINE.
    DATA: IMKPFT1 LIKE I_MKPF1 OCCURS 0 WITH HEADER LINE.
    DATA: IMARDT LIKE I_MARD OCCURS 0 WITH HEADER LINE.
    DATA: IMARDHT LIKE I_MARDH OCCURS 0 WITH HEADER LINE.
    DATA: T_FINAL LIKE I_MKPF OCCURS 0 WITH HEADER LINE.
    DATA: IMKPFT2 LIKE I_MKPF OCCURS 0 WITH HEADER LINE.
    FCAT is used for the field catalog
    DATA: FCAT TYPE TABLE OF SLIS_FIELDCAT_ALV WITH NON-UNIQUE DEFAULT KEY
                      WITH HEADER LINE INITIAL SIZE 0,
    for excluding the ICONs from the application toolbar
          FEXC TYPE TABLE OF SLIS_EXTAB WITH NON-UNIQUE DEFAULT KEY
                     WITH HEADER LINE INITIAL SIZE 0,
    FS_LAYO is used for Grid Layout
          FS_LAYO TYPE SLIS_LAYOUT_ALV,
    FEVENTS to handle the events TOP OF PAGE & USER_COMMAND
          FEVENTS TYPE TABLE OF SLIS_ALV_EVENT WITH NON-UNIQUE DEFAULT KEY
                     WITH HEADER LINE INITIAL SIZE 0,
    FHEADER is used for List header
          FHEADER TYPE TABLE OF SLIS_LISTHEADER WITH NON-UNIQUE DEFAULT KEY
                     WITH HEADER LINE INITIAL SIZE 0,
    sort is used for sorting
          FSORT TYPE TABLE OF SLIS_SORTINFO_ALV WITH NON-UNIQUE DEFAULT KEY
                     WITH HEADER LINE INITIAL SIZE 0,
          FCAT1 TYPE TABLE OF SLIS_FIELDCAT_ALV WITH NON-UNIQUE DEFAULT KEY
                    WITH HEADER LINE INITIAL SIZE 0,
          FS_LAYO1 TYPE SLIS_LAYOUT_ALV,
          GT_LIST_TOP_OF_PAGE1 TYPE SLIS_T_LISTHEADER,
          FEVENTS1 TYPE TABLE OF SLIS_ALV_EVENT WITH NON-UNIQUE DEFAULT KEY
                 WITH HEADER LINE INITIAL SIZE 0,
           FHEADER1 TYPE TABLE OF SLIS_LISTHEADER WITH NON-UNIQUE DEFAULT  
                  KEY WITH HEADER LINE INITIAL SIZE 0,
           G_STATU_071 TYPE SLIS_FORMNAME VALUE 'Z_PFSTATUS',
           ALV_VARIANT1 LIKE DISVARIANT.
    Variable Declaration *
    TYPES: TRFF_TYPE_DEC_6_5(6) TYPE P DECIMALS 5.
    DATA: FYEAR(4),
          MON(2),
          FYEAR1(4),
          MON1(2),
          OBAL LIKE MARD-LABST,
          CBAL LIKE MARD-LABST,
          INDEX TYPE I,
          COUNT,
          COUNT1 TYPE I,
          O_STK TYPE P DECIMALS 3,
          C_STK TYPE P DECIMALS 3,
          V_MJAHR LIKE MKPF-MJAHR,
          MONTHS TYPE TRFF_TYPE_DEC_6_5,
          MONTH TYPE I.
    Global variables for handling ALV functionality
    DATA: ALV_KEYINFO TYPE SLIS_KEYINFO_ALV,
          ALV_VARIANT LIKE DISVARIANT,
          ALV_LAYOUT TYPE SLIS_LAYOUT_ALV,
          ALV_REPID LIKE SY-REPID,
          ALV_PRINT TYPE SLIS_PRINT_ALV,
          ALV_DETAIL_FUNC(30),
          ALV_DEFAULT_VARIANT LIKE DISVARIANT-VARIANT,
          ALV_COLOURIZE_FIELDS LIKE MMIM_REP_PRINT-COLOR.
    RANGES: R_BUDAT FOR MKPF-BUDAT.
    *Added by Prabhu for year on 26.4.05.
    DATA: IDATE LIKE R_BUDAT OCCURS 0 WITH HEADER LINE.
    Selection Screen Elements *
    SELECTION-SCREEN BEGIN OF BLOCK BLK WITH FRAME TITLE TEXT-001.
      SELECT-OPTIONS: S_WERKS FOR MARD-WERKS OBLIGATORY NO INTERVALS.
      PARAMETER: P_SPMON LIKE S031-SPMON NO-DISPLAY .
      SELECT-OPTIONS: S_MATNR FOR MARA-MATNR OBLIGATORY,
                      S_LGORT FOR MSEG-LGORT NO-EXTENSION NO INTERVALS,
                      S_MBLNR FOR MKPF-MBLNR,
                      S_BUDAT FOR MKPF-BUDAT OBLIGATORY .
    SELECTION-SCREEN END OF BLOCK BLK.
    SELECTION-SCREEN BEGIN OF BLOCK BLK3 WITH FRAME TITLE TEXT-004.
          PARAMETER : MTART LIKE MARA-MTART DEFAULT 'FERT' NO-DISPLAY.
    SELECTION-SCREEN END OF BLOCK BLK3.
    SELECTION-SCREEN BEGIN OF BLOCK BLK2 WITH FRAME TITLE TEXT-003.
    SELECTION-SCREEN END OF BLOCK BLK2.
    ADDED BY PRABHU FOR DAY-WISE REPORT.
    SELECTION-SCREEN BEGIN OF BLOCK B3 WITH FRAME TITLE TEXT-007.
      PARAMETERS: D1 RADIOBUTTON GROUP P1 DEFAULT 'X',
                  M1 RADIOBUTTON GROUP P1,
                  Y1 RADIOBUTTON GROUP P1.
    SELECTION-SCREEN END OF BLOCK B3.
    SELECTION-SCREEN BEGIN OF BLOCK B2 WITH FRAME TITLE TEXT-006.
    PARAMETERS: ALV_DEF LIKE DISVARIANT-VARIANT.
    SELECTION-SCREEN END OF BLOCK B2.
    DATA: S_BUDAT1 LIKE S_BUDAT OCCURS 0 WITH HEADER LINE."prabhu
    Initialization *
    INITIALIZATION.
      PERFORM ALV_INIT.
    AT SELECTION-SCREEN ON VALUE-REQUEST FOR ALV_DEF.
      PERFORM ALV_F4.
    At Selection Screen
    *AT SELECTION-SCREEN ON VALUE-REQUEST FOR p_spmon.
    PERFORM monat_f4.
    At Selection Screen *
    AT SELECTION-SCREEN.
    checking for the layout
      PERFORM ALV_CHECK.
    authorisation check for the Plant
    PERFORM auth_check.
    Validation for the Plant
      PERFORM VALIDITY_CHECK.
      IF MTART NE 'FERT'.
        MESSAGE E041 WITH 'Material Type must be FERT Only...'.
      ENDIF.
      IF D1 = 'X'." On 26.4.05.
        P_SPMON0(4) = S_BUDAT-LOW0(4).
        P_SPMON4(2) = S_BUDAT-LOW4(2).
      ELSE.
        P_SPMON0(4) = S_BUDAT-LOW0(4).
        P_SPMON4(2) = S_BUDAT-LOW4(2).
      ENDIF.
      LOOP AT S_BUDAT.
        IF S_BUDAT-HIGH IS INITIAL.
          S_BUDAT-HIGH = S_BUDAT-LOW.
          MODIFY S_BUDAT.
        ENDIF.
      ENDLOOP.
      IDATE-LOW = S_BUDAT-LOW.
      IDATE-HIGH = S_BUDAT-HIGH.
      CALL FUNCTION 'FIMA_DAYS_AND_MONTHS_AND_YEARS'
        EXPORTING
           I_DATE_FROM = IDATE-LOW
           I_DATE_TO = IDATE-HIGH
       IMPORTING
    E_DAYS =
          E_MONTHS = MONTH
    E_YEARS =
      DATA: I(3) TYPE C.
      I = S_BUDAT-LOW+4(2).
      CLEAR: R_BUDAT.
      REFRESH: R_BUDAT.
    *added by Prabhu for Only for Oneday.on 18.5.5
      IF MONTH EQ '0'.
        MONTH = MONTH + 1.
      ENDIF.
    *added by Prabhu for Only for Oneday.on 18.5.5
      DO MONTH TIMES.
        R_BUDAT-LOW = S_BUDAT-LOW.
        APPEND R_BUDAT.
      ENDDO.
      I = 0.
      LOOP AT R_BUDAT.
        R_BUDAT-LOW4(2) = S_BUDAT-LOW4(2) + I.
        I = I + 1.
        R_BUDAT-LOW+6(2) = '01'.
        MODIFY R_BUDAT.
      ENDLOOP.
      LOOP AT R_BUDAT.
        CALL FUNCTION 'RP_LAST_DAY_OF_MONTHS'
           EXPORTING
             DAY_IN = R_BUDAT-LOW
           IMPORTING
             LAST_DAY_OF_MONTH = R_BUDAT-HIGH
          EXCEPTIONS
            DAY_IN_NO_DATE = 1
            OTHERS = 2
        MODIFY R_BUDAT.
      ENDLOOP.
      LOOP AT R_BUDAT.
        IF R_BUDAT-LOW4(2) = S_BUDAT-LOW4(2).
          R_BUDAT-LOW = S_BUDAT-LOW.
          MODIFY R_BUDAT.
        ENDIF.
        IF R_BUDAT-HIGH4(2) = S_BUDAT-HIGH4(2).
          R_BUDAT-HIGH = S_BUDAT-HIGH.
          MODIFY R_BUDAT.
        ENDIF.
    For Summary on 26.4.05.
        IF Y1 = 'X'.
          CLEAR R_BUDAT.
          REFRESH R_BUDAT.
          R_BUDAT-LOW = S_BUDAT-LOW.
          R_BUDAT-HIGH = S_BUDAT-HIGH.
          APPEND R_BUDAT.
          CLEAR R_BUDAT.
        ENDIF.
      ENDLOOP.
    At Selection Screen *
    AT SELECTION-SCREEN OUTPUT.
    Start of Selection *
    START-OF-SELECTION.
      V_MJAHR = P_SPMON+0(4).
    Get plant distinction warehouse/production
      PERFORM GET_PLANT_DISTINCTION.
    Collect the data from various tables
      PERFORM GETDATA_FG_STOCK.
    here the number of rows in the output table is found
      PERFORM OUTPUT_TABLE_CHECK.
    here the top of the page code is written, that is to be displayed
    in the output
      PERFORM Z_TOP_OF_PAGE.
    here ALV layout properties are set
      PERFORM Z_LAYOUT_SETTINGS.
    ALV EVENTS for TOP OF PAGE and for USER COMMAND
      PERFORM Z_ALV_EVENTS.
    The field catalog is defined for the Primary List is defined in
    the subroutine CREATE_FIELD_CATALOG include program ZPRRDOCR_FCAT
      PERFORM Z_CREATE_FIELD_CATALOG.
    This is for displaying the output
      PERFORM Z_REUSE_ALV_GRID_DISPLAY.
    *& Form getdata_fg_stock
    Getting data from standard tables
    FORM GETDATA_FG_STOCK.
    For getting the Start date & end date of the month
    PERFORM get_month_dates.
    Getting the Opening Stock from MARDH table
      IF MON EQ '01'.
        MON1 = MON.
        FYEAR1 = FYEAR.
        MON = '12'.
        FYEAR = FYEAR - 1.
      ELSE.
        MON1 = MON.
        FYEAR1 = FYEAR.
        MON = MON - 1.
        FYEAR = FYEAR.
      ENDIF.
      PERFORM GET_RECORDS_FROM_DB.
    *added for Month Summary on 26.4.05.
      LOOP AT R_BUDAT.
        S_BUDAT-LOW = R_BUDAT-LOW.
        S_BUDAT-HIGH = R_BUDAT-HIGH.
    *for Month
        P_SPMON0(4) = S_BUDAT-LOW0(4).
        P_SPMON4(2) = S_BUDAT-LOW4(2).
    *for summary.
        IF Y1 = 'X'.
          LOOP AT S_BUDAT.
            S_BUDAT1-SIGN = 'I'.
            S_BUDAT1-OPTION = 'NB'.
            S_BUDAT1-LOW = S_BUDAT-LOW.
            S_BUDAT1-HIGH = S_BUDAT-HIGH.
            APPEND S_BUDAT1.
            CLEAR S_BUDAT1.
          ENDLOOP.
        ENDIF.
        IMKPFT[] = I_MKPF[].
        IMKPFT2[] = I_MKPF[].
        IMARDT[] = I_MARD[].
        IMARDHT[] = I_MARDH[].
        PERFORM MONTH_WISE.
        PERFORM PROCESS_MOVEMENTS.
        PERFORM CALCULATE_OPENING_STOCK.
        PERFORM UPDATE_NON_TRANSACTION_ITMS.
        PERFORM DELETE_EMPTY_RECORDS.
        CLEAR: IMARDHT,IMARDT,IMKPFT1,IMKPFT,I_FINAL,I_FINAL5.
        REFRESH: IMARDHT,IMARDT,IMKPFT1,I_FINAL,I_FINAL5,IMKPFT.
      ENDLOOP.
      CLEAR: R_BUDAT.
      REFRESH: R_BUDAT.
    *end of changes for month.
    ENDFORM. " getdata_fg_stock
    FORM MONAT_F4 *
    F4-Hilfe für Monat *
    FORM MONAT_F4.
      DATA: BEGIN OF MF_DYNPFIELDS OCCURS 1.
              INCLUDE STRUCTURE DYNPREAD.
      DATA: END OF MF_DYNPFIELDS.
      DATA: MF_RETURNCODE LIKE SY-SUBRC,
             MF_MONAT LIKE ISELLIST-MONTH,
             MF_HLP_REPID LIKE SY-REPID.
      FIELD-SYMBOLS: .
    Wert von Dynpro lesen
      GET CURSOR FIELD MF_DYNPFIELDS-FIELDNAME.
      APPEND MF_DYNPFIELDS.
      MF_HLP_REPID = SY-REPID.
      DO 2 TIMES.
        CALL FUNCTION 'DYNP_VALUES_READ'
          EXPORTING
            DYNAME               = MF_HLP_REPID
            DYNUMB               = SY-DYNNR
          TABLES
            DYNPFIELDS           = MF_DYNPFIELDS
          EXCEPTIONS
            INVALID_ABAPWORKAREA = 01
            INVALID_DYNPROFIELD  = 02
            INVALID_DYNPRONAME   = 03
            INVALID_DYNPRONUMMER = 04
            INVALID_REQUEST      = 05
            NO_FIELDDESCRIPTION  = 06
            UNDEFIND_ERROR       = 07.
        IF SY-SUBRC = 3.
    Aktuelles Dynpro ist Wertemengenbild
          MF_HLP_REPID = 'SAPLALDB'.
        ELSE.
          READ TABLE MF_DYNPFIELDS INDEX 1.
    Unterstriche durch Blanks ersetzen
          TRANSLATE MF_DYNPFIELDS-FIELDVALUE USING '_ '.
          EXIT.
        ENDIF.
      ENDDO.
      IF SY-SUBRC = 0.
    Konvertierung ins interne Format
        CALL FUNCTION 'CONVERSION_EXIT_PERI_INPUT'
          EXPORTING
            INPUT         = MF_DYNPFIELDS-FIELDVALUE
          IMPORTING
            OUTPUT        = MF_MONAT
          EXCEPTIONS
            ERROR_MESSAGE = 1.
        IF MF_MONAT IS INITIAL.
    Monat ist initial => Vorschlagswert aus akt. Datum ableiten
          MF_MONAT = SY-DATLO(6).
        ENDIF.
        CALL FUNCTION 'POPUP_TO_SELECT_MONTH'
          EXPORTING
            ACTUAL_MONTH               = MF_MONAT
          IMPORTING
            SELECTED_MONTH             = MF_MONAT
            RETURN_CODE                = MF_RETURNCODE
          EXCEPTIONS
            FACTORY_CALENDAR_NOT_FOUND = 01
            HOLIDAY_CALENDAR_NOT_FOUND = 02
            MONTH_NOT_FOUND            = 03.
        IF SY-SUBRC = 0 AND MF_RETURNCODE = 0.
    ASSIGN (MF_DYNPFIELDS-FIELDNAME) TO <MF_FELD>. " ==>> note 148804
    <MF_FELD> = MF_MONAT.
          CALL FUNCTION 'CONVERSION_EXIT_PERI_OUTPUT'
            EXPORTING
              INPUT  = MF_MONAT
            IMPORTING
              OUTPUT = MF_DYNPFIELDS-FIELDVALUE.
          COLLECT MF_DYNPFIELDS.
          CALL FUNCTION 'DYNP_VALUES_UPDATE'
            EXPORTING
              DYNAME               = MF_HLP_REPID
              DYNUMB               = SY-DYNNR
            TABLES
              DYNPFIELDS           = MF_DYNPFIELDS
            EXCEPTIONS
              INVALID_ABAPWORKAREA = 01
              INVALID_DYNPROFIELD  = 02
              INVALID_DYNPRONAME   = 03
              INVALID_DYNPRONUMMER = 04
              INVALID_REQUEST      = 05
              NO_FIELDDESCRIPTION  = 06
              UNDEFIND_ERROR       = 07. "<<== note 148804
        ENDIF.
      ENDIF.
    ENDFORM.                                                    "MONAT_F4
    *& Form get_month_dates
    Calculating the Month Start & End Date
    FORM GET_MONTH_DATES.
      IF M1 = 'X'.
        FYEAR = P_SPMON+0(4).
        MON = P_SPMON+4(2).
        CONCATENATE FYEAR MON '01' INTO R_BUDAT-LOW.
        R_BUDAT-SIGN = 'I'.
        R_BUDAT-OPTION = 'BT'.
        CALL FUNCTION 'BKK_GET_MONTH_LASTDAY'
          EXPORTING
            I_DATE = R_BUDAT-LOW
          IMPORTING
            E_DATE = R_BUDAT-HIGH.
        APPEND R_BUDAT.
        CLEAR S_BUDAT.
        REFRESH S_BUDAT.
        S_BUDAT-SIGN = 'I'.
        S_BUDAT-OPTION = 'BT'.
        S_BUDAT-LOW = R_BUDAT-LOW.
        S_BUDAT-HIGH = R_BUDAT-HIGH.
        APPEND S_BUDAT.
      ELSE.
        FYEAR = P_SPMON+0(4).
        MON = P_SPMON+4(2).
        CONCATENATE FYEAR MON '01' INTO R_BUDAT-LOW.
        R_BUDAT-SIGN = 'I'.
        R_BUDAT-OPTION = 'BT'.
        CALL FUNCTION 'BKK_GET_MONTH_LASTDAY'
          EXPORTING
            I_DATE = R_BUDAT-LOW
          IMPORTING
            E_DATE = R_BUDAT-HIGH.
        APPEND R_BUDAT.
      ENDIF.
    ENDFORM. " get_month_dates
    *& Form output_table_Check
    checking for records for output
    FORM OUTPUT_TABLE_CHECK .
      DESCRIBE TABLE I_FINALT LINES INDEX.
      IF INDEX EQ 0.
        MESSAGE I041 WITH TEXT-005.
        LEAVE LIST-PROCESSING.
      ENDIF.
    ENDFORM. "OUTPUT_TABLE_CHECK
    *& Form Z_TOP_OF_PAGE
    for setting the details in the top of page *
    has no formal paramters *
    FORM Z_TOP_OF_PAGE.
      DATA: V_MON(2),
      V_YR(40),
      V_FIN(18),
      V_FIN1(48),
      LOW(10),
      HIGH(10).
      V_MON = P_SPMON+4(2).
      V_YR = P_SPMON+0(4).
      FHEADER-TYP = 'H'.
      FHEADER-INFO = 'Stock Register Report (FG Stock)'.
      APPEND FHEADER.
      CLEAR FHEADER.
    *if m1 = 'X'.
    CONCATENATE 'Month = ' v_mon '.' v_yr INTO v_fin.
    fheader-typ = 'H'.
    fheader-info = v_fin.
    APPEND fheader.
    CLEAR fheader.
    *endif."prabhu on 18.5.5
      IF D1 = 'X'.
        CLEAR S_BUDAT.
        LOOP AT S_BUDAT.
          CONCATENATE S_BUDAT-LOW6(2) '/' S_BUDAT-LOW4(2) '/'
          S_BUDAT-LOW+0(4) INTO LOW.
          CONCATENATE S_BUDAT-HIGH6(2) '/' S_BUDAT-HIGH4(2) '/'
          S_BUDAT-HIGH+0(4) INTO HIGH.
          CONCATENATE 'Date = ' LOW ' - ' HIGH INTO V_FIN1.
          FHEADER-TYP = 'H'.
          FHEADER-INFO = V_FIN1.
          APPEND FHEADER.
          CLEAR FHEADER.
        ENDLOOP.
      ENDIF.
    ENDFORM. " Z_TOP_OF_PAGE
    *& Form Z_LAYOUT_SETTINGS
    this is done for setting the properties for the layout of the *
    grid *
    has no formal paramters *
    FORM Z_LAYOUT_SETTINGS.
      FS_LAYO-ZEBRA = 'X'. " Output in Zebra pattern
      FS_LAYO-DETAIL_POPUP = 'X'. " A popup window appears to give
      FS_LAYO-DETAIL_TITLEBAR = TEXT-022.
      FS_LAYO-COLWIDTH_OPTIMIZE = 'X'.
    ENDFORM. " Z_LAYOUT_SETTINGS
    *& Form Z_ALV_EVENTS
    This is used for handling the events TOP OF PAGE and the USER *
    COMMAND event *
    has no formal paramters *
    FORM Z_ALV_EVENTS.
      CALL FUNCTION 'REUSE_ALV_EVENTS_GET'
        EXPORTING
          I_LIST_TYPE = 0
        IMPORTING
          ET_EVENTS   = FEVENTS[].
      READ TABLE FEVENTS WITH KEY NAME = 'TOP_OF_PAGE'.
      IF SY-SUBRC = 0.
        FEVENTS-FORM = 'Z_TOPOFPAGE'.
        MODIFY FEVENTS INDEX SY-TABIX.
        CLEAR FEVENTS.
      ENDIF.
      READ TABLE FEVENTS WITH KEY NAME = 'USER_COMMAND'.
      IF SY-SUBRC = 0.
        FEVENTS-FORM = 'Z_USER_COMMAND'.
        MODIFY FEVENTS INDEX SY-TABIX.
        CLEAR FEVENTS.
      ENDIF.
    ENDFORM. "Z_ALV_EVENTS
    *& Form Z_CREATE_FIELD_CATALOG
    here the field catalog is created for the primary list *
    no formal parameters *
    FORM Z_CREATE_FIELD_CATALOG.
    for the Plant
      FCAT-FIELDNAME = 'WERKS'.
      FCAT-KEY = 'X'.
      FCAT-OUTPUTLEN = '000005'.
      FCAT-JUST = 'L'.
      FCAT-SELTEXT_M = 'Plant'.
      FCAT-DDICTXT = 'M'.
      FCAT-INTTYPE = 'C'.
      FCAT-DATATYPE = 'CHAR'.
      APPEND FCAT.
      CLEAR FCAT.
    for the Material Type
      FCAT-FIELDNAME = 'MTART'.
      FCAT-KEY = 'X'.
      FCAT-OUTPUTLEN = '000006'.
      FCAT-JUST = 'L'.
      FCAT-SELTEXT_M = 'MatTyp'.
      FCAT-DDICTXT = 'M'.
      FCAT-INTTYPE = 'C'.
      FCAT-DATATYPE = 'CHAR'.
      APPEND FCAT.
      CLEAR FCAT.
    for the Material No.
      FCAT-FIELDNAME = 'MATNR'.
      FCAT-KEY = 'X'.
    fcat-hotspot = 'X'.
      FCAT-OUTPUTLEN = '000018'.
      FCAT-JUST = 'L'.
      FCAT-SELTEXT_M = 'Material'.
      FCAT-DDICTXT = 'M'.
      FCAT-INTTYPE = 'C'.
      FCAT-DATATYPE = 'CHAR'.
      APPEND FCAT.
      CLEAR FCAT.
    for the Material Description
      FCAT-FIELDNAME = 'MAKTX'.
      FCAT-KEY = ''.
      FCAT-OUTPUTLEN = '000040'.
      FCAT-JUST = 'L'.
      FCAT-SELTEXT_M = 'Description'.
      FCAT-DDICTXT = 'M'.
      FCAT-INTTYPE = 'C'.
      FCAT-DATATYPE = 'CHAR'.
      APPEND FCAT.
      CLEAR FCAT.
    for the Unit of Measure
      FCAT-FIELDNAME = 'MEINS'.
      FCAT-KEY = ''.
      FCAT-OUTPUTLEN = '03'.
      FCAT-JUST = 'C'.
      FCAT-SELTEXT_M = 'UOM'.
      FCAT-DDICTXT = 'M'.
      FCAT-INTTYPE = 'C'.
      FCAT-DATATYPE = 'UNIT'.
      APPEND FCAT.
      CLEAR FCAT.
    for the Plant
      FCAT-FIELDNAME = 'MONTH'.
      FCAT-KEY = 'X'.
      FCAT-OUTPUTLEN = '08'.
      FCAT-JUST = 'L'.
      FCAT-SELTEXT_M = 'MONTH'.
      FCAT-DDICTXT = 'M'.
      FCAT-INTTYPE = 'C'.
      FCAT-DATATYPE = 'CHAR'.
      APPEND FCAT.
      CLEAR FCAT.
    for the Opening Stock
      FCAT-FIELDNAME = 'C_STK'.
      FCAT-HOTSPOT = ' '.
      FCAT-OUTPUTLEN = '000016'.
      FCAT-JUST = 'L'.
      FCAT-SELTEXT_M = 'Opening Stock'.
      FCAT-DDICTXT = 'M'.
      FCAT-INTTYPE = 'Q'.
      FCAT-DATATYPE = 'QUAN'.
    fcat-do_sum = 'X'.
      FCAT-JUST = 'R'.
      FCAT-NO_ZERO = 'X'.
      APPEND FCAT.
      CLEAR FCAT.
    for the Total Receipts
      FCAT-FIELDNAME = 'TRECEP'.
      FCAT-HOTSPOT = ' '.
      FCAT-OUTPUTLEN = '000016'.
      FCAT-JUST = 'L'.
      FCAT-SELTEXT_M = 'Total Receipts'.
      FCAT-DDICTXT = 'M'.
      FCAT-INTTYPE = 'Q'.
      FCAT-DATATYPE = 'QUAN'.
      FCAT-DO_SUM = 'X'.
      FCAT-JUST = 'R'.
      FCAT-NO_ZERO = 'X'.
      APPEND FCAT.
      CLEAR FCAT.
    for the Production
      FCAT-FIELDNAME = 'PRODU'.
      FCAT-HOTSPOT = ' '.
      FCAT-OUTPUTLEN = '000016'.
      FCAT-JUST = 'L'.
      FCAT-SELTEXT_M = 'Production'.
      FCAT-DDICTXT = 'M'.
      FCAT-INTTYPE = 'Q'.
      FCAT-DATATYPE = 'QUAN'.
      FCAT-DO_SUM = 'X'.
      FCAT-JUST = 'R'.
      FCAT-NO_ZERO = 'X'.
      APPEND FCAT.
      CLEAR FCAT.
    for the Other Plant Receipts
      FCAT-FIELDNAME = 'RECEP'.
      FCAT-HOTSPOT = ' '.
      FCAT-OUTPUTLEN = '000016'.
      FCAT-JUST = 'L'.
      FCAT-SELTEXT_M = 'Othr Plnt Recpts'.
      FCAT-DDICTXT = 'M'.
      FCAT-INTTYPE = 'Q'.
      FCAT-DATATYPE = 'QUAN'.
      FCAT-DO_SUM = 'X'.
      FCAT-JUST = 'R'.
      FCAT-NO_ZERO = 'X'.
      APPEND FCAT.
      CLEAR FCAT.
    Sales Return
      FCAT-FIELDNAME = 'SAL_RET'.
      FCAT-HOTSPOT = ' '.
      FCAT-OUTPUTLEN = '000016'.
      FCAT-JUST = 'L'.
      FCAT-SELTEXT_M = 'Sales Return'.
      FCAT-DDICTXT = 'M'.
      FCAT-INTTYPE = 'Q'.
      FCAT-DATATYPE = 'QUAN'.
      FCAT-DO_SUM = 'X'.
      FCAT-JUST = 'R'.
      FCAT-NO_ZERO = 'X'.
      APPEND FCAT.
      CLEAR FCAT.
    Total Dispatches
      FCAT-FIELDNAME = 'TDISP'.
      FCAT-HOTSPOT = ' '.
      FCAT-OUTPUTLEN = '000016'.
      FCAT-JUST = 'L'.
      FCAT-SELTEXT_M = 'Total Dispatches'.
      FCAT-DDICTXT = 'M'.
      FCAT-INTTYPE = 'Q'.
      FCAT-DATATYPE = 'QUAN'.
      FCAT-DO_SUM = 'X'.
      FCAT-JUST = 'R'.
      FCAT-NO_ZERO = 'X'.
      APPEND FCAT.
      CLEAR FCAT.

  • Summary report to show all the software components and version installed

    We are using 64bit Windows 2003 and Hyperion Planning and Essbase in 2 separate servers. I am not sure whether Windows can have a summary report to show all the software components and version installed and show it is 32bit or 64bit version installed?
    Thanks!

    Refer steps here to delete SC file.:
    http://support.apple.com/kb/TS2363
    Then proceed to repair your QuickTime. START / CONTROL PANEL / ADD n REMOVE PROGRAMS / highlight QUICKTIME and click CHANGE then REPAIR.

  • Summary Report For Store Activities.

    Dear Gurus..
    I need to make a summary report on Store Activities.
    Having following Fields.
    Material number |  Material Description |  Material Unit | Opening Balance | Quantity |  Receipts | Quantity | Issues | Quantity | Closing Balance | Quantity |
    Please guide me..
    Which tables will be required.

    Dear Sir.
    I have uploaded a PDF file for your reference .
    this is the out put my client want .
    [Summary of Store Activities.|http://www.geocities.com/saadnisarahmedkhatib/ABAP/File0003.PDF]
    Regards
    Saad Nisar

  • Summary Report using Master-Detail Data on Siebel BI Publisher Report

    I have to create a Summary Report using Master-Detail relationship. Report fields are Account Name, Special Need Type, Customer Status, No of Customers, No of Claims. I am using rtf to create template and any help is highly appreciated
    <?xml version="1.0" encoding="UTF-8" ?>
    - <ListofIO>
    - <ListOfBipCustomerSpecialNeeds>
    - <Account>
    <Name>CVNE</Name>
    - <ListOfContact>
    - <Contact>
    <SpecialNeedsFlg>Y</SpecialNeedsFlg>
    <SpecialNeedsType>Large Text</SpecialNeedsType>
    <PersonUId>1-6NI9</PersonUId>
    - <ListOfContact_Claims>
    - <Contact_Claims>
    <AccountNumber>TEST0015362272</AccountNumber>
    <ClaimNumber>1-4FVL</ClaimNumber>
    <ClaimStatus>Closed</ClaimStatus>
    <ClaimGBPAmount />
    </Contact_Claims>
    </ListOfContact_Claims>
    </Contact>
    - <Contact>
    <SpecialNeedsFlg>Y</SpecialNeedsFlg>
    <SpecialNeedsType>Braille</SpecialNeedsType>
    <PersonUId>1-L0A</PersonUId>
    - <ListOfContact_Claims>
    - <Contact_Claims>
    <AccountNumber />
    <ClaimNumber>1-ACX6</ClaimNumber>
    <ClaimStatus>Open</ClaimStatus>
    <ClaimGBPAmount>818.18196694218</ClaimGBPAmount>
    </Contact_Claims>
    - <Contact_Claims>
    <AccountNumber />
    <ClaimNumber>1-GI58</ClaimNumber>
    <ClaimStatus />
    <ClaimGBPAmount>45454.099173473</ClaimGBPAmount>
    </Contact_Claims>
    </ListOfContact_Claims>
    </Contact>
    - <Contact>
    <SpecialNeedsFlg>Y</SpecialNeedsFlg>
    <SpecialNeedsType>Large Text</SpecialNeedsType>
    <PersonUId>1-6FPP</PersonUId>
    - <ListOfContact_Claims>
    - <Contact_Claims>
    <AccountNumber>CVNE</AccountNumber>
    <ClaimNumber>1-7BRL</ClaimNumber>
    <ClaimStatus>Reviewed</ClaimStatus>
    <ClaimGBPAmount>562</ClaimGBPAmount>
    </Contact_Claims>
    </ListOfContact_Claims>
    </Contact>
    </ListOfContact>
    </Account>
    <Login>SADMIN</Login>
    </ListOfBipCustomerSpecialNeeds>
    </ListofIO>
    Edited by: user2298324 on 13-Aug-2010 09:36

    Thanks for the reply. The many to many relationship between Claims and Payments are achieved through intersection table in siebel. When Customer has multiple claims, single payment issued for both claims. Also single claim can multiple payments such (part compensation, interests, final compensation etc)

Maybe you are looking for

  • Opening a T code in some other window

    Hello All, We have a requirement where in we just need to display an Input box and a submit button in an iview / HTML Page (Similar to r/3's Command box) where the users can enter sap t-code. Upon Entering the t-code and clicking on the button the t-

  • Transfer boot camp, parallels, windows to internal drive

    My 2011 MBP crashed for the 4th time (bad graphics chips), so I was given a new MBP.  They nicely kept the old machine and transferred the HD info over to the new one. However, they did not transfer any of the boot camp/windows/parallels stuff.  I ha

  • Save a pdf with zoom 150%

    I convert a few jpg as a pdf and i want that every time i send it or some one open it the acarobat will open it on zoom 150%; the reason is that the pictures looks small on the 66% zoom thats open automatically with the acrobat thank you J.N

  • Oracle Data integrator Set up Steps

    Hi All, I am very new to ODI. Can somoeone help me with the steps involved in ODI or how to get started with it after its installation? Thanks, Renu.

  • Import images not responsive

    Working on xp-sp2 machine, had LR beta 4.1 installed. Un-installed 4.1 & installed v1 w/o incident. Deleted all LR libraries as I am cleaning up HD & archiving pix elsewhere. Created new library & attempted import pix. Everything seemed ok, LR indica