Upgrade to IOS 6.1 - all incoming calls come in as a call waiting call when there is no other call going on, and it won't let me actually answer the call.
I upgraded my AT&T iPhone 4 from IOS 6.0.1 to IOS 6.1 on Monday evening. It completed successfully overnight and everything looked good on Tuesday morning until I received my first call. When the phone rang, the screen showed the typical 'call waiting' screen, asking me if I wanted to 'End Call and Answer', 'Ignore Call', or 'Hold Call and Answer'. Using any of the selections still does not allow the call to be answered. It takes a hard reboot to clear the call.
If I make an outgoing call, the phone hangs on the 'End Call' portion. It shows the button being pressed and that it is ending the call, but it doesn't ever end. It also takes a hard reboot to clear the call.
So, I have tried hard reboots of the phone, without any success. Last night, I tried to reset the phone to factory settings and restored my phone content from iTunes. Unfortunately, I still was having the issue. I have also tried restoring the Network Settings, and that did not work as well.
Has anyone seen any similar behavior and have any advice?
Thanks
A brief and probably non-helpful answer: I know of no way to eliminate your large amount of duplicates other than by repetitive, tedious manual effort.
*There has got to be a simpler way.*
I hope you're right, but I don't think there is a simpler way.
BACKUP: It also appears that the only way I can back up the catalog is to shut down LR. Really?!
Yes, really
Similar Messages
-
I just updated my iphone to IOS 7 and it won't let me agree to the terms and conditions? Its frozen on that page! Help me!!
Try downloading the Find My Friends app, then sign in with your iCloud ID on it and accept the terms and conditions there.
-
I have been trying to update my IPod touch 4g to IOS 5, but I tunes does not recognize it and says it is up to date. When I Updated my other touch yesterday every thing worked great. but this one does not seem to want to go beyond 4.2.1(8C148)
Ok make sure you have iTunes 11. Then connect iPod touch to computer then iTunes should pop up automatically. After it opens on the bottom left there should be a tab where it says your name and then iPod. For example (Johns iPod) click on that then it brings all your information of the iPod including restore and updating.
Dont worry -
What gives?
I click on the dots below on the bottom of the screen and the same thing happens. the second or third screens appear for a split second the flick back to the first screen. Thanks. Ron.
I do have a magic mouse but your explanation doesn't work on my iMac. I can find nothing in settings which causes this. -
Iphone4s - because I use pass lock I cannot decline a call such as a blocked number. If I can't see who is calling then I don't want to answer it. But due to having my phone on lock - i can see its a blocked number but there is no option to decline. If i unlock my phone it automatically answers the call. Does anyone else have this problem or is there a solution I don't knnow about?
In the locked screen you can press the sleep/wake button once to silence to the call and twice to send it to voicemail.
-
I have just upgraded to ios7 on my iPhone 4s and it won't let me connect to wifi at all
I have just upgraded to ios7 on my iPhone 4s and it won't let me connect to the wifi at all I'm tapping the wifi and nothing is happening?
See this. http://support.apple.com/kb/ts1559
-
Since I upgraded to IOS 7.0.2, many times I am unable to answer the calls. Then I have to switch off and on to answer the calls. I checked with my three friends who updated and they are also facing same problem. Kindly let me know the solution.
Since other millions of people updated and do not have that problem - it means one of two.
1.Your friends lied to you and do not have that problem and in that case only your installation of ios7 got corrupted and you need to restore your phone.
2.Your friends didn't lie to you and all 4 of you need to restore phones (that way reinstalling ios 7 properly)
here are instructions for restore and you may have to backup before restore.
iTunes: Restoring iOS software - Support - Apple -
Hi All,
We have a CAD server installed on ICM PG box.
Two agent location namely X and Y
Datacenter resided in location X
Users in location X were not facing any issue
Users from location Y facing diificulties and they were using CAD ver 7.5.1.
Randomly for all the users in location Y were reporting CAD application gets Hanged immediately when the agent answer the call.
Location Y is connected via WAN.
Both the location we are using same CAD version, but still issue persist in location Y.
Kindly let me know how to address this issue
If this was a BUG why it was not impacting other locationHi,
I found the problem in CAD Troubleshooting guide.
Problem: Agents can’t log into Agent Desktop.
Solution: During Unified ICM installation, an “Agent Login Required for Client Events” check box is displayed. By default this check box is unchecked. It must remain unchecked for agents to be able to log in. If the check box was checked during Unified ICM installation, you must reinstall Unified ICM and make sure the check box remains unchecked.
I reinstalled CTI Server without that checkbox and now the agent is able to login.
Thanks all for your help.
Cristian -
I have an iPhone 6Plus and i have a lag when i answer the calls
I have an iPhone 6Plus IOS 8.3 and i have a lag when i answer the calls that happens many times and thanks
Hello Loay Elraghy,
Thank you for visiting Apple Support Communities.
It appears that you have a lag when you answer calls.
If there is a pause or delay between when you answer a call and when the call connects, the troubleshooting steps mentioned in this article may be helpful:
If you can't make or receive calls on your iPhone - Apple Support
Sincerely,
Jeremy -
Answer the call as soon as call is landed to MGW
I have few Cisco MGW in my voice network located on different city that is connected to my IVR applications on different geography.
PSTN <-- --> CISCO MGW <-- --> IVR
We wanted to answer the call as soon as call is landed to MGW & 1st it should connect the PSTN leg and play a ringback file on MGW & then try to connect VoIP leg towards IVR.
Please help me to configure above scenariosHi Ranjit
You can use different TCL script to do so.
One script you can use is bacd script.
This script lets you play welcome prompt, then send it to different queue. But instead, you can configure it such a way that, it plays the ringback wave file as welcome prompt, then autometically send call to a queue number, which will be dial-peer destination pattern pointing to you IVR
Also, you can use AA tcl script. This one also playes welcome and ask for extention. But with simple modification, you can send the call to your IVR after playing the ringback as welcome prompt.
All these scripts you can download from CCO and look for documenation.
http://www.cisco.com/en/US/docs/voice_ip_comm/cucme/bacd/configuration/guide/40bacd.html
Hope this helps
thanks
- abu -
The problem is to answer the call.
The problem is to answer the call. Answer manages only the fourth time. Where are the hidden fault softies what to do?
Hi almannai,
Welcome to the Apple Support Communities!
I understand that when trying to FaceTime with someone it will act as though it is connecting and then the call will close. There are several steps you can go though as listed in the following article, but typically making sure both devices are completely up to date solves this type of issue.
iOS: Troubleshooting FaceTime
http://support.apple.com/kb/ts3367
Resolution
If you encounter issues making or receiving FaceTime calls, follow these steps:
Update both devices (your device and your friend's device) to the latest version of iOS.
If you started to have issues making or receiving FaceTime calls after April 16, 2014, you or your friend may have an expired device certificate. Updating both devices will resolve this issue.
I hope this helps,
-Joe -
The screen is black . i can.t get it to respond.Power + home soft reset didnt work. Itunes could detect any sync apps. I used my home phone to call my iphone and on my home phone i can hear the calling tone.But my iphone didn't ring/screen did not light up. Its a iphone 4. Any ideas how to fix this?
If the basics (restart, reset, restore from backup, restore as new) don't work, you'll need to bring the phone to Apple for evaluation
-
I just bought a iphone 5c and when I tried to use my computer to download the syncd version of my phone I found out I needed the latest version of the IOS. I tried downloading the latest version and it won't let me do it unless I upgrade. What else can I do? I don't want to buy a new computer....
If you want to synch your iPhone with iTunes on your computer, you will need to meet the minimum requirements. If this requires you to upgrade your computer then you will need to do so. System requirements for the iPhone 5c are clearly posted on Apple's website and this should have been considered before you bought your phone. There's no way around the system requirements.
-
Hello apple
I have the problem with my iPhone and my friends have this problem too.
My iPhone have the problem about calling and answer the call. When I use my iPhone to call I can't hear anything from my iPhone but the person that I call can answer it but when answer both of us can't hear anything and when I put my iPhone to my face the screen is still on and when I quit the phone application and open it again it will automatic call my recent call. And when my friends call me my iPhone didn't show anything even the missed call I'm only know that I missed the call from messages from carrier. Please check these problem I restored my iPhone for 4 time now in this week. I lived in Hatyai, Songkhla,Thailand and many people in my city have this problem.
Who have this problem??Apple isnt here. this is a user based forum for technical questions. The solution is to restart, reset, and restore as new which is in the manual after that get it replaced for hard ware failure. if your within your one year warranty its replaced if it is out of the warranty then it is 199$
-
My iPhone4 doesn't appear to have "FacTime" (App), yet when I "ring" it from my iPad's FaceTime, I hear a faint ringing tone but nowhere to answer the call? Anyone out there suggest what's wrong? (going to the App Store and searching "FaceTime" brings apps that have icons different to that of my iPads!)
Yeah, I know I can restore it, but I might as well go ahead and try. I just finished a backup for icloud and itunes to make sure, I'll go ahead and restore it and set it up as new and see how that works. Seems like I have no other options at this point, I'd still like to know what they did with the Download tab in itunes store, if they removed it or if I'm just overlooking it.
Maybe you are looking for
-
Creating multiple digital signatures
When I create multiple freehand signatures in an adobe acrobat document there is an issue. Can I create multiple signatures and place them on the document without having the original signature be listed as part of an older revision? It marks a new si
-
Assign logical components to Test Case Management
Hi , I have my scenario where I had uploaded the test cases in SOLAR02. And created the rest of the Test plans, packages and so on. My logical components are: 100 DEV 130 Single Test 200 QAS (Integral Test) 300 PRD I need to know which is the way to
-
Perfmon Hourglass User Defined
On a Server 2012 R2, we setup performance monitor and created a user defined entry to duplicate the existing system performance test. Ran the test for 4 hours. After the test the user defined entry has an icon next to it that displays an hourglass. I
-
Generating values using Regular Expression
Can values be generated using Regular Expreession? I want to generate unique string values on the fly using secified Regular Expression. Thanx in advance. Message was edited by: Kaustubh
-
Issues in Smartform when logging in two different languages
Hi Experts, I have created a Smartform with orignal language as EN (English). The Smartform is working fine when I login through EN language but when I login through EL (Greek) I am facing problems. The Smartform created in language EN does not get c