Upgraded Call Assistant not working

The other day when I went to check the call assistant it required an upgrade so I let it run. Now when ever I get a call it does not show it as incoming nor does it show anything in the log. Does anyone know why it is not working?

heeheehee they (verizon sales) told me that to get VCA I HAD to upgrade my phone service.
after a month of not having VCA (they confirmed it was never 'enabled' yet), I cancelled the phone upgrade because the only reason I got the phone upgrade was to get the VCA (per the sales person). and so now I am paying for the early termination fee for the upgraded phone service that they NOW tell me was never needed in the first place.
and now my homeowners association has discontinued the cables service that is supplied-as-part-of-the HOA-assessment, so I have to decide wether I wan to pay the existing cable co or switch my TV over to Verizon . . . . . .hmmmm do I really have a decision here?
cjacobs001

Similar Messages

CALLER ID not working for International incoming calls

Hi,
I've a strange issue where CALLER ID not working for International incoming calls, it shows INTERNATIONAL UNKNOWN NUMBER in the phone display, but the number shows correclty in Verizon Call assistant !!!
Any clue?

yashshankar wrote:
Hi
I recently purschased an Online number but the caller id does not work for incoming calls.How do we resolve this problem?.
Regards
Yash
You didn't mention what country your Online Number is in. Not all of Skype's Online Numbers are eligible for use as Caller ID when calling telephones or sending SMS messages. If your number is from one of these countries (Chile, Denmark, Estonia, Hong Kong, Poland, Sweden, the UK and the US), then it can be used this way. Otherwise, you can use a mobile number from countries other than Japan or Mexico as Caller ID with Skype, after the number goes through a verification process where Skype sends SMS messages with codes to that number.
To get to these settings, log into your Skype account here on the Skype web site using the "Account" link at the top of this page. You'll see a screen that would include your current Caller ID settings, and a link to change that. If your Online Number is from one of those countries I referenced above, just select it and you're done.
Hope that helps!
Patrick
Location/Ubicacion: Arizona USA
Time Zone/Hora Local: UTC/GMT -7
If this message has adequately addressed your issue, please click on the “Accept as Solution” button. If you found a post useful then please "Give Kudos" at the bottom of my post, so that this information can benefit others.
Si esto mensaje le ha ayudado, por favor haga clic en "Aceptar como solución". Si encuentra un mensaje útil, por favor "Da Kudos" al final del mensaje, por lo que esta información puede beneficiar a otros.
I am not a Skype employee. No soy un empleado de Skype.

Skype click to call is not working in Safari 6 wit...

My Skype click-to call is not working on Safari 6 with OS X 10.7.4. The number highlights, but when I click on the number, nothing happens. I do have Skype installed on the computer and it works fine. I am running Skype for the mac 5.8.0.1027 and skype extension for safari 2.1.0.10405. I have two other macs which are running OS X 10.6.8 and Safari 5.1.7 and the click to call (2.1.0.10405) works great on both of those. I can not get it to work on the mac running Lion. Any help? Thanks

I reverted back to Safari 5.1.7 from Safari 6 and now Click To Call works.
For anyone wondering how I did this, you can view instructions here:
http://apple.stackexchange.com/posts/59342/revisions
I am new to using Macs and was able to follow these simple instructions. Takes a while for Pacifist to install 5.1.7, but it's worth it to have Click To Call working now.
You will not be able to do this if you have Mountain Lion as Mountain Lion requires Safari 6.
Lastly, the next time you update your Mac and it asks if you want to upgrade to Safari 6, say NO. At least not until you see that a fix has been posted here in these forums by either Skype or Apple.
P.S. I posted this reply using OSX 10.7.4 and Safari 5.1.7

Caller id not working after syncing my iphone to my pc?

caller id not working after syncing my iphone to my pc?

Syncing with iTunes has nothing to do with this, especially when not syncing contacts with a supported address book app on your computer which very few Windows users seem to be inclined to do.
Caller ID is not working in which way?

My iphone 6 connects to the car via bluetooth, the music works good, but the phone calles does not work. It looks like it is working but doesn't. I have tried in my Hyundai and a Dodge rent car and get the same results. I updated the last 8.0.2.

My iphone 6 connects to the car via bluetooth, the music works good, but the phone calls does not work. It looks like it is working but doesn't. I have tried in my Hyundai Sonata and a Dodge Dart rent car and get the same results. I updated the last 8.0.2. It worked the first day i had the phone, and then i updated to Ios 8.0.2 and it quit working.
Now when i get in the car, it acts like it is connected and makes the same call it was on after syncing to bluetooth, but it really isn't on a call. This is happening on both cars.
Does anyone know if this is the phone and i need to take it to Apple or if there is an issue that Apple is working on getting a fix for?
My son in law has the exact same phone as me, we both got the on 10/6, he had a Dodge Dart and his is working via bluetooth.
Someone HELP please, as i consider this a safety issue by not having my calls go to bluetooth.

We had the same problem, but figure out the solution.
You MUST have at least 1 song added to your ITUNE! After you add a free song, then everything else should work as normal!
Hope this helps!

I sign in tol my Firefox is out of date. did try to do the upgrade but did not work need help

''locking this thread as duplicate, please continue at [https://support.mozilla.org/en-US/questions/978554 /questions/978554]''
I need help to get my sign in working. Need to upgrade?
how to do that?
<sub>edit: removed personal information for your protection. (philipp)</sub>

I sign in told my Firefox is out of date. did try to do the upgrade but did not work. Need help
Let me know how to get my sign in working

After update to IOS 4.3.5 my Iphone incoming and out going calls is not working properly and I have to remove the SIM regulerly to conduct or receive a call

after update to IOS 4.3.5 my Iphone incoming and out going calls is not working properly and I have to remove the SIM regulerly to conduct or receive a call
It is not practicale to do this always any one faces the same problem

There may be a problem with the SIM card. Get a new SIM card from your carrier - there should be no charge for a replacement.
If no change with a new SIM card, the standard troubleshooting steps in order are:
Power your iPhone off and on.
An iPhone reset, which is done by pressing and holding the home button and the sleep/wake or on/off button simultaneously until you see the Apple logo and then release.
Restore your iPhone with iTunes from your iPhone's backup.
Restore your iPhone with iTunes as a new iPhone or not from your iPhone's backup.
If no change after any of these steps in order, your iPhone has a hardware problem.

F1 Help Perfomance Assistant not working - ITS SAP GUI HTML

Hi All,
when using a Transaction in SAP Portal i like to use the F1 Help. Transaction is displayed by ITS SAP GUI HTML. I have the option to display the Help in:
- Modal Window <-- this works
- Performance Assistant <-- not working
When pressing F1 an error message appears saying: "Expression_not_Num" while using the perfomance assistant.
- Is there a configuration missing? Is something not installed?
- Can i change the default personalization setting for help for all users to modal window?
Any ideas?
Regards
M. Stanka

Hi Michael Stanka ,
i got same issue from last week onwards.. If press F1 ,it displays like "Page cant be displayed". I searched in forums also but i couldnt get clear point. U posted ur issue was resolved.. Could u plz provide the steps how to solve?? My mobile no:09566855978(India-Chennai)

Caller display not worked since June 2014

On 26/06/14 I reported a fault (VOL-**********) that the caller display function had stopped working following a thunderstorm in the area. According to the fault status this fault is showing as being corrected and closed on 02/07/14 when in fact the fault still exists. I tested the line using the BT test socket with a new BT2000 phone and this displayed ‘incoming call’ therefore my internal wiring is not part of the problem. I have also dialled the test code *#234# to check if the caller display service is available and confirmed that it is. I then tested the new BT2000 phone on the neighbour’s telephone line and this showed the caller ID for incoming calls, as did my other telephone as well; therefore none of the telephone handsets are at fault. Three times BT have informed me that the fault has been fixed and yet I still have no caller display. Reading through the forums it would appear that other people have encountered similar issues and that the problem is at the exchange, “An Openreach engineer discovered that the RS232 burst transferring the CLI number up the line was too weak and he then went down to the exchange to investigate. He then discovered that the fault lay in the ADSL device which lies between the analogue exchange equipment and the outgoing line”.
I’m surprised to see that BT are taking so long to trace a fault in their system last raised 5/8/2014 (VOL012-**********) and that they haven’t sent an engineer to the property or to the exchange to check the problem.
My patience is wearing thin over this problem with my Caller Display not working as it started in mid June. I’m also becoming less enthusiastic about BT and find it harder to recommend them to others.
My last message from BT, tells me that it should be back to normal on the 8 August. However, it is still not working. Their message that my phone should be back to normal now and if it isn’t report this to BT, is ridiculous. If an engineer had investigated what was causing the fault and found it, then he would have fixed it. However, either an engineer has not investigated the fault or BT is not competent in fixing their own service faults and makes these statements with crossed fingers?

An engineer called yesterday and told me that he had been asked to test the line for a voice fault not a Caller Display fault. However, his testing revealed there is no line fault, CLI signal is strong and he was happy that the new BT2000 phone (bought after the lightning strike) is working properly. (This phone had also been tested on a neighbour’s phone line where it displayed the callers number). He also found that this same BT2000 phone on my line was not displaying the Caller’s number (CLI), but couldn’t offer any reason why.
I conjectured with him that these tests must bring the problem down to a corrupted CLI signal which does not allow the phone to understand the phone number being sent.
When the lightning struck the phone line back in June, it blew the telephone connection in the back of the Sky Box with a flash and bang (telephone cable now removed from the Sky box). It shorted the Openreach Faceplate (now replaced) so that the phones and broadband stopped working and it caused the phone to light up and react as it does when a call comes through.
Now isn’t it possible that the lightning also travelled along the copper wire to the green cabinet just outside the house and damaged something there which is corrupting the CLI signal, but which does not not show up when the voice line is tested? If not, then there must be a problem further back in the infrastructure, possibly in the Exchange, that is causing a corrupted signal to be sent to my phone?
He told me that another team would have to investigate the Caller Display fault as he was instructed to look into a voice issue and as a field engineer he was not able to investigate any problem that might be in the Exchange. I don’t know whether this Exchange Team would be able to investigate a problem in the Cabinet if nothing is found in the Exchange or can that only be done by a field engineer? He told me to contact BT again as he’d done all that he had been instructed to do and they would have to instigate a fault team to further investigate the problem.
When all this is considered we have the basic problem that BT are unable to provide me with a Privacy and Caller Display Service that I have been paying for, because of a fault in their infrastructure. How much longer is it going to take before they correct the problem that’s been going on since June 2014?

Exchange 2010 Out of Office Assistant not working?

New server with a new Exchange 2010 install into an existing domain...
When users on both the internal network and external network try to access the Out of Office Assistant they get an error message of: " Your Out of Office settings cannot be displayed, because the server is currently unavailable".
I have done tons of research on WebServicesVirtualDirectory and AutodiscoverVirtualDirectory and set both internal and external URL's that work if you go to them in IE )internally and externally offsite).
Here are the settings of Autodiscover and Webservices:
[PS] C:\Windows\system32>Get-WebServicesVirtualDirectory | Format-List
RunspaceId : 86aaf7fc-ca19-45b2-87d1-45ec432a670d
CertificateAuthentication :
InternalNLBBypassUrl : https://MAILSERVER.domain_name.local/ews/exchange.asmx
GzipLevel : High
Name : EWS (Default Web Site)
InternalAuthenticationMethods : {Basic, Ntlm, WindowsIntegrated, WSSecurity}
ExternalAuthenticationMethods : {Basic, Ntlm, WindowsIntegrated, WSSecurity}
LiveIdSpNegoAuthentication : False
WSSecurityAuthentication : True
LiveIdBasicAuthentication : False
BasicAuthentication : True
DigestAuthentication : False
WindowsAuthentication : True
MetabasePath : IIS://MAILSERVER.domain_name.local/W3SVC/1/ROOT/EWS
Path : C:\Program Files\Microsoft\Exchange Server\V14\ClientAccess\exchweb\EWS
Server : MAILSERVER
InternalUrl : https://MAILSERVER.domain_name.local/EWS/Exchange.asmx
ExternalUrl : https://mail.domain_name.com/owa
AdminDisplayName :
ExchangeVersion : 0.10 (14.0.100.0)
DistinguishedName : CN=EWS (Default Web Site),CN=HTTP,CN=Protocols,CN=MAILSERVER,CN=Servers,CN=Exchange Adm
inistrative Group (FYDIBOHF23SPDLT),CN=Administrative Groups,CN=First Organization,CN=M
icrosoft Exchange,CN=Services,CN=Configuration,DC=domain_name,DC=local
Identity : MAILSERVER\EWS (Default Web Site)
Guid : 4639e4b9-9cf3-4f92-8940-f7c31e07cd47
ObjectCategory : domain_name.local/Configuration/Schema/ms-Exch-Web-Services-Virtual-Directory
ObjectClass : {top, msExchVirtualDirectory, msExchWebServicesVirtualDirectory}
WhenChanged : 4/1/2010 2:47:37 PM
WhenCreated : 3/11/2010 11:02:22 AM
WhenChangedUTC : 4/1/2010 8:47:37 PM
WhenCreatedUTC : 3/11/2010 6:02:22 PM
OrganizationId :
OriginatingServer : DOMAINCONTROLLER.domain_name.local
IsValid : True
[PS] C:\Windows\system32>AutodiscoverVirtualDirectory | Format-List
RunspaceId : 86aaf7fc-ca19-45b2-87d1-45ec432a670d
Name : Autodiscover (Default Web Site)
InternalAuthenticationMethods : {Basic, Ntlm, WindowsIntegrated, WSSecurity}
ExternalAuthenticationMethods : {Basic, Ntlm, WindowsIntegrated, WSSecurity}
LiveIdSpNegoAuthentication : False
WSSecurityAuthentication : True
LiveIdBasicAuthentication : False
BasicAuthentication : True
DigestAuthentication : False
WindowsAuthentication : True
MetabasePath : IIS://MAILSERVER.domain_name.local/W3SVC/1/ROOT/Autodiscover
Path : C:\Program Files\Microsoft\Exchange Server\V14\ClientAccess\Autodiscover
Server : MAILSERVER
InternalUrl : https://MAILSERVER.domain_name.local/autodiscover/autodiscover.xml
ExternalUrl : https://mail.domain_name.com/autodiscover/autodiscover.xml
AdminDisplayName :
ExchangeVersion : 0.10 (14.0.100.0)
DistinguishedName : CN=Autodiscover (Default Web Site),CN=HTTP,CN=Protocols,CN=MAILSERVER,CN=Servers,CN=Exc
hange Administrative Group (FYDIBOHF23SPDLT),CN=Administrative Groups,CN=First Organiza
tion,CN=Microsoft Exchange,CN=Services,CN=Configuration,DC=domain_name,DC=loca
l
Identity : MAILSERVER\Autodiscover (Default Web Site)
Guid : 7a234ea2-20fc-412b-bbf0-3ea5f965d8da
ObjectCategory : domain_name.local/Configuration/Schema/ms-Exch-Auto-Discover-Virtual-Directory
ObjectClass : {top, msExchVirtualDirectory, msExchAutoDiscoverVirtualDirectory}
WhenChanged : 4/1/2010 3:00:49 PM
WhenCreated : 3/11/2010 11:02:07 AM
WhenChangedUTC : 4/1/2010 9:00:49 PM
WhenCreatedUTC : 3/11/2010 6:02:07 PM
OrganizationId :
OriginatingServer : DOMAINCONTROLLER.domain_name.local
IsValid : True
Test-OutlookWebServices comes up with errors. The Test E-mail AutoConfiguration within Outlook still appears to be looking for Autodiscover at different URLs...
OOF within Outlook Web App functions.
Any suggestions would be helpful!

From your previous post, I understand that OOF doesn't work for both internal and external clients. Error message "Your Out of Office settings cannot be displayed, because the server is currently unavailable" was received from Outlook client side. Please correct me if I have any misunderstanding.
Before we go any further, I would appreciate your help in clarifying the following questions:
1. When did this issue begin to occur, since the installation of Exchange 2010?
2. Can we access and configure OOF from OWA?
As internal & external clients are using different methods/URL to access Autodiscover and EWS, which provided OOF service, I recommend we focus on the internal users first.
To troubleshoot this issue, please install the hotfix mentioned in the following KB on the Exchange Client Access Server first:
Outlook 2007 crashes or you cannot access OOF settings after you install a package that contains the .NET Framework 3.5 with SP1 and the .NET Framework 2.0 with SP2 on an Exchange 2007 Client Access server or on an Exchange 2010 Client Access server
http://support.microsoft.com/kb/958934
After that, check if the issue remains. If there is still problem, please help me collect:
1. Test E-mail AutoConfiguration from Outlook client
1. Launch Outlook 2007 using a correct configured profile.
2. Hold down the CTRL key on your keyboard and click the Outlook icon in the notification area of the Windows taskbar, also known as the notification area.
3. In the menu that appears, click Test E-mail AutoConfiguration.
4. Enter your E-mail Address and Password (if not logged into the domain) in the respective edit boxes.
5. Choose the desired auto configuration methods with Use Autodiscover, clear other selection.
6. Click Test.
7. Please send me the screenshot of the result tab and log tab.
2. Result files after running the following command on the Exchange 2007 server
Get-ExchangeCertificate | FL >C:\cert.txt
Get-WebServicesVirtualDirectory –Server ServerName | FL >C:\EWS.txt
Get-AutodiscoverVirtualDirectory –Server ServerName | FL >C:\Audis.txt
Get-ClientAccessServer | FL >C:\cas.txt
Email them to me at [email protected]
With the title as
"Exchange 2010 Out of Office Assistant not working?"
Regards
Fazal M khan

Speaker on phone calls will not work, how can I fix this? I have already done system restart and reset to manufature default.

speaker on phone calls will not work, how can I fix this? I have already done system restart and reset to manufature default. I also have no voice with Safari or any other apps including music!

If your speaker is broken, then you may need to get a repair done.
Are you unable to hear anything at all, or is it just one speaker in particular?
If it is just one speaker, where's it located?

HP Support Assistant not work

Hp Support Assistant not work. Do not detect Product Name, Serial Number or Product Number. My notebook is TM2-1070us.

Uninstall HP support assistant from Control Panel. After uninstallation completes, make sure you restart the computer. Do not avoid restarting the computer at any cost.
Once restarted, download and install the updated HP support assistant from below link
http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-91948-1&lc=en&dlc=en&cc=us&...
//Click on Kudos and Accept as Solution if my reply was helpful and answered your question//
I am an HP employee!!

MacPro 2013 Yosemite Cellular Call Handoff Not Working

I've got a new MacPro 2013 Quad and have recently installed Yosemite 10.10. I've got a Logitech C615 USB Webcam which worked just fine for FaceTime in 10.9 and was expecting to be able to use it for cellular call handoff in Yosemite. For some reason, handoff of phone calls is not working. My Mac will "Ring" but as soon as I accept, the call fails. Moreover, on my iPhone 6 Plus it says "call cancelled" when I view recent calls. When I originate a call from my MacPro, the phone will ring once and then show "call failed" with the same error on my phone. Thinking perhaps it was the USB webcam (which now seems glitchy in Yosemite), I disconnected it and attempted to use my Focusrite 8i6 for a phone call, but was met with the same error messages. Accepting and originating calls from my MacBook Air using the same setup works fine.
Does anyone have any ideas what's going on? Anyone have any luck making or receiving cellular calls on the MacPro 2013 and, if so, what is your setup?
Thanks for any advice you can offer.

Hey rczig2323,
Thanks for the question. I understand that you are experiencing issues with Continuity in regards to phone calls. The following resources may provide a solution:
Connect your iPhone, iPad, iPod touch, and Mac using Continuity
http://support.apple.com/kb/HT6337
Get help using Continuity with iOS 8 and OS X Yosemite
http://support.apple.com/kb/TS5458
Thanks,
Matt M.

Skype 6.3 upgrade for Mac not working

[Topic title updated by moderator to be more descriptive. Original topic title was: "Skype upgrade for Mac not working"]
BE WARNED - just because you are being asked to upgrade your Skype, it does not mean it will work on your machine. I am a fairly regular user of Skype and this morning was unable to log-in, being told that I needed to upgrade. I did so to 6.3.0.602 but I was unable to log-in once the software had downloaded. After some research on the forums and finally a text chat with Support, I was told that Skype 6.3.0.602 requires a Mac OSX of 10.9 or above - I have 10.5.8
"So what can I do", I asked the tech support. The answer is nothing (unless I get new OS X software) - there is no Skype software programme that supports my operating system and no timeframe for when it might be available.
Huh? That's right. It's just not available. So for now, users with less than OS X 10.9 will be unable to use Skype when they are instructed to upgrade. It really doesn't make sense. But just so you know....

jessicaed wrote:
BE WARNED - just because you are being asked to upgrade your Skype, it does not mean it will work on your machine. I am a fairly regular user of Skype and this morning was unable to log-in, being told that I needed to upgrade. I did so to 6.3.0.602 but I was unable to log-in once the software had downloaded. After some research on the forums and finally a text chat with Support, I was told that Skype 6.3.0.602 requires a Mac OSX of 10.9 or above - I have 10.5.8
"So what can I do", I asked the tech support. The answer is nothing (unless I get new OS X software) - there is no Skype software programme that supports my operating system and no timeframe for when it might be available.
Huh? That's right. It's just not available. So for now, users with less than OS X 10.9 will be unable to use Skype when they are instructed to upgrade. It really doesn't make sense. But just so you know....
Please look at the top of the community page, and you will find a box "Search:". Write your problem here "Upgrade not working" and see what crops up. Most likely you will be taken somewher like here: http://community.skype.com/t5/Mac/quot-We-ve-signed-you-out-because-your-using-an-outdated-version/m...
Here you will read that the latest versions of Skype will not work on some of the versions of MacOS, and that PPC requires one version, Leopard another, Snow leopard another, Mountain Lion another. They are indoctrinated with a stamp in their forehead to enforce their congregation of true believers to install the latest with all "security fixes" or death is looming. They are not used to software that is 2 years old.
So, with Mac, we have different operating systems and different sets of libraries - and things may go belly up if you upgrade - a OS feature is done differently, a libary has been placed inside the OS, and is no longer needed - and if you try to use it, you will be trapped.
Install the latest version that works for your Mac, and make sure to freeze this. Update the "info.plist" file and tell Skype that you use their latest should they pry. As long as it works, do not change anything!
And make the change to stop Skype from checking every time you start.

Nokia 301 called id not working

Caller id not working properly in my new nokia 301 name does not display
it does not work if the number is stored in +968 99999999 format
can somebody help
i have more than 500 numbers stored in the same above format

Have you checked for duplicates and what storage you are using,Use only one storage,either phone or sim.
If i have helped at all a click on the white star below would be nice thanks.
Now using the Lumia 1520

Upgraded Call Assistant not working

Similar Messages

Maybe you are looking for