Upgraded TFS 2010 SP1 to TFS 2012 but "Test-SPContentDatabase" throws error while upgrading SP2010 to SP2013

Hello All,
Executed the following command in the SP 2013 management shell as administrator:
"Test-SPContentDatabase -Name WSS_CONTENT -WebApplication http://tfs2010"
Errors:
1. Category : MissingSetupFile
Error : True
UpgradeBlocking : False
Message : File [Features\ReportServer\ReportViewer.dwp] is referenced
[2] times in the database [WSS_CONTENT], but is not
installed on the current farm. Please install any
feature/solution which contains this file.
2. Category : MissingSetupFile
Error : True
UpgradeBlocking : False
Message : File [Features\TfsDashboardAgileReports\Reports\Report
Template.xltx] is referenced [2] times in the database
[WSS_CONTENT], but is not installed on the current farm.
Please install any feature/solution which contains this file.
3. Category : MissingSetupFile
Error : True
UpgradeBlocking : False
Message : File [Features\TfsDashboardCmmiReports\Reports\Report
Template.xltx] is referenced [2] times in the database
[WSS_CONTENT], but is not installed on the current farm.
Please install any feature/solution which contains this file.
4. Category : Configuration
Error : False
UpgradeBlocking : False
Message : The [SharePoint - 80] web application is configured with
claims authentication mode however the content database you
are trying to attach is intended to be used against a
windows classic authentication mode.
Tried for the error 4: New-SPWebApplication -Name "TFSWEBAPP" -ApplicationPool "SharePoint Web Services System" -AuthenticationMethod "NTLM" -ApplicationPoolAccount
(Get-SPManagedAccount "XXX\spservice") -Port 80 -URL "http://tfs2010
After executing the above command I was getting ">>",
didn't got any other reply for long time. Is there any power shell command to convert "claims mode" to "classic mode"
Can someone help on the above mentioned errors.
Thanks ,
Rajukumar

Hi Charles,
Thanks for the reply.
Environment details:
OS: Windows server 2008 R2
Database: SQL Server 2008 R2
TFS: TFS 2010 with SP1
SharePoint: SharePoint 2010 with SP2
Upgrade Environment details:
OS: Windows server 2012
Database: SQL Server 2012 with SP1
TFS: TFS 2012
SharePoint: SharePoint 2013
Steps followed by me for upgradation:
1. Stopped all the services of TFS and IIS
2. Took backup of TFS and SP databases from SQL server
3. Installed the new environment and restored databsases to new Database server
4. Upgraded to TFS 2012
5. Installed and configured SP 2013
6. Upgraded to SP 2013
Go the errors mentioned in earlier message during up-gradation. I queried the files from ALLDOCS table of WSS_Content and deleted those.
7. Upgraded successfully with minor issues ( reports are not available for the old Team project in the report manager URL)
8. I updated the reports manually.
Question: Please let me know is there any script to update reports in all the team projects.
Thanks,
Rajukumar

Similar Messages

Change the HTML Report format the same as TestStand 2010 SP1 in TestStand 2012

I have a lot of test steps (~10K) that gets executed and the indentations on HTML report format in TestStand 2012 gets too deep. I have to slide the horizontal bar to the right to see the report when l'm in the middle. I did not have this issue in TestStand 2010 SP1.
Is ther a way to change the HTML Report format (style) the same as TestStand 2010 SP1 in TestStand 2012?

dexrays:
We are currently investigating this issue. In order to help us with the investigation could you post a sequence file and configuration that reproduce the problem? The configuration file is located in C:\ProgramData\National Instruments\TestStand 2012\Cfg\ModelPlugins\ResultProcessing.cfg for Windows Vista / Windows 7 or you can use the Cfg link in the TestStand 2012 installation directory.
You can use the Legacy Model Switcher (included in TestStand 2012) to use the legacy models instead of the new models. The legacy models are more backward compatible, however, this also means that you will not be able to use the improvements in the new models (for example, the new plug-in architecture). If this is acceptable then you can use the legacy model switcher to switch to the legacy models. The Legacy Model Switcher is located in the Start Menu under Programs->National Instruments->TestStand 2012->Tools->Compatibility. For more information on Legacy Model Switcher please read the online help.
Thanks for your report and for your help with diagnosing this issue.
- Francisco

MSTest not running in TFS build but tests works fine locally in visual studio

Hi Team,
I have 18 unit tests in my test project wanted to run in TFS build. But build says no tests to execute. please find the below details and images for more info.
Even MSTest command is not working.
TFS : 2010
BUild Server has visual studio 2010 ultimate with SP1.
Thanks in Advance,
Shree
$hree

Hi Shree,
I am glad to hear you resolved the issue. Thanks for sharing your experience here, it is good to other members who experience the same issue in the community.
Best regards,
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

I need to install RSAT-NPAS Admin tools on Server 2012 Std, but it's throwing error: 0x80073701, please help.

Powershell output (and this is the same with servermanager installs for the admin tools)...
Windows PowerShell
Copyright (C) 2012 Microsoft Corporation. All rights reserved.
PS C:\Users\Administrator.domainacctxxx> Install-WindowsFeature –name RSAT-NPAS
Install-WindowsFeature : The request to add or remove features on the specified server failed.
Installation of one or more roles, role services, or features failed.
The referenced assembly could not be found. Error: 0x80073701
At line:1 char:1
+ Install-WindowsFeature –name RSAT-NPAS
+ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+ CategoryInfo : InvalidOperation: (@{Vhd=; Credent...Name=localhost}:PSObject) [Install-WindowsFeature],
Exception
+ FullyQualifiedErrorId : DISMAPI_Error__Failed_To_Enable_Updates,Microsoft.Windows.ServerManager.Commands.AddWind
owsFeatureCommand
Success Restart Needed Exit Code Feature Result
False No Failed {}
I found this in CBS.log - how do i fix it?:
2014-11-14 19:09:15, Info CBS Exec: Resolving Package: Microsoft-Windows-HealthCertificateServer-UI-Package~31bf3856ad364e35~amd64~ko-KR~6.2.9200.16384, Update: HCSUI
2014-11-14 19:09:15, Info CBS Exec: Resolving component from existing package; passing NULL manifest path to PinDeployment and hoping things haven't been scavenged.
2014-11-14 19:09:15, Info CBS Exec: Resolving Package: Microsoft-Windows-HealthCertificateServer-UI-Package~31bf3856ad364e35~amd64~ko-KR~6.2.9200.16384, Update: HCSUI, PinDeployment:
amd64_microsoft-windows-n..oyment-languagepack_31bf3856ad364e35_6.2.9200.16384_ko-kr_bbd94c8cf907ec26
2014-11-14 19:09:15, Info CBS Exec: 1 deployments need bulk staging
2014-11-14 19:09:15, Error CSI 000003b2@2014/11/15:01:09:15.293 (F) base\wcp\componentstore\csd_locking.cpp(216): Error STATUS_SXS_ASSEMBLY_MISSING originated in function CCSDirectTransaction::LockComponent
expression: (null)
[gle=0x80004005]
2014-11-14 19:09:15, Info CBS Added C:\Windows\Logs\CBS\CBS.log to WER report.
2014-11-14 19:09:15, Info CBS Added C:\Windows\Logs\CBS\CbsPersist_20141115005933.log to WER report.
2014-11-14 19:09:15, Info CBS Added C:\Windows\Logs\CBS\CbsPersist_20141114234655.log to WER report.
2014-11-14 19:09:15, Info CBS Added C:\Windows\Logs\CBS\CbsPersist_20141114231138.log to WER report.
2014-11-14 19:09:15, Info CBS Added C:\Windows\Logs\CBS\CbsPersist_20141114183412.log to WER report.
2014-11-14 19:09:15, Info CBS Added C:\Windows\Logs\CBS\CbsPersist_20141114102449.log to WER report.
2014-11-14 19:09:15, Info CBS Not able to add pending.xml.bad to Windows Error Report. [HRESULT = 0x80070002 - ERROR_FILE_NOT_FOUND]
2014-11-14 19:12:11, Error CSI 000003b3 (F) STATUS_SXS_ASSEMBLY_MISSING #2462361# from CCSDirectTransaction::OperateEnding at index 0 of 1 operations, disposition 2[gle=0xd015000c]
2014-11-14 19:12:11, Error CSI 000003b4 (F) HRESULT_FROM_WIN32(ERROR_SXS_ASSEMBLY_MISSING) #2462247# from Windows::ServicingAPI::CCSITransaction::ICSITransaction_PinDeployment(Flags = 0, a
= Microsoft-Windows-Networking-HCSConfigUI-Deployment-LanguagePack, Version = 6.2.9200.16384, pA = PROCESSOR_ARCHITECTURE_AMD64 (9), Culture = [l:10{5}]"ko-KR", VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, Type neutral, TypeName
neutral, PublicKey neutral, cb = (null), s = (null), rid = [102]"Microsoft-Windows-HealthCertificateServer-UI-Package~31bf3856ad364e35~amd64~ko-KR~6.2.9200.16384.HCSUI", rah = (null), manpath = (null), catpath = (null), ed = 0, disp = 0)[gle=0x80073701]
2014-11-14 19:12:11, Info CBS Failed to pin deployment while resolving Update: Microsoft-Windows-HealthCertificateServer-UI-Package~31bf3856ad364e35~amd64~ko-KR~6.2.9200.16384.HCSUI
from file: (null) [HRESULT = 0x80073701 - ERROR_SXS_ASSEMBLY_MISSING]
2014-11-14 19:12:11, Info CBS Failed to bulk stage deployment manifest and pin deployment for package:Microsoft-Windows-HealthCertificateServer-UI-Package~31bf3856ad364e35~amd64~ko-KR~6.2.9200.16384
[HRESULT = 0x80073701 - ERROR_SXS_ASSEMBLY_MISSING]
2014-11-14 19:12:11, Info CSI 000003b5@2014/11/15:01:12:11.926 CSI Transaction @0x33a9f4aa10 destroyed
2014-11-14 19:12:11, Info CBS Perf: Resolve chain complete.
2014-11-14 19:12:11, Info CBS Failed to resolve execution chain. [HRESULT = 0x80073701 - ERROR_SXS_ASSEMBLY_MISSING]
2014-11-14 19:12:11, Error CBS Failed to process single phase execution. [HRESULT = 0x80073701 - ERROR_SXS_ASSEMBLY_MISSING]
2014-11-14 19:12:11, Info CBS WER: Generating failure report for package: Microsoft-Windows-ServerCore-Package~31bf3856ad364e35~amd64~~6.2.9200.16384, status: 0x80073701, failure source:
Resolve, start state: Installed, target state: Installed, client id: DISM Package Manager Provider
2014-11-14 19:12:11, Info CBS Not able to query DisableWerReporting flag. Assuming not set... [HRESULT = 0x80070002 - ERROR_FILE_NOT_FOUND]
2014-11-14 19:12:11, Info CBS Added C:\Windows\Logs\CBS\CBS.log to WER report.
2014-11-14 19:12:11, Info CBS Added C:\Windows\Logs\CBS\CbsPersist_20141115005933.log to WER report.
2014-11-14 19:12:11, Info CBS Added C:\Windows\Logs\CBS\CbsPersist_20141114234655.log to WER report.
2014-11-14 19:12:11, Info CBS Added C:\Windows\Logs\CBS\CbsPersist_20141114231138.log to WER report.
2014-11-14 19:12:11, Info CBS Added C:\Windows\Logs\CBS\CbsPersist_20141114183412.log to WER report.
2014-11-14 19:12:11, Info CBS Added C:\Windows\Logs\CBS\CbsPersist_20141114102449.log to WER report.

Hi Jeff,
I check the cbs.log you posted, and found the packages with KO-KR in the name fail to depoly, which indicated the installer was looking for Korean language pack files.
Solution: A quick trip to Control Panel-Clock, Language and Region-Add a Language and we could select and then install the Korean language. Tip: double click on the language when it's added to the list to auto-download
from Microsoft.
Refer to:
Windows Server 2012 - Roles, Features and 0x80073701
If there is anything else regarding this issue, please feel free to post back.
Best Regards,
Anna Wang

SXI_CACHE throws error while activating; but error does not exist anymore

Hi everybody,
when I try to activate a BPM in sxi_cache. sxi_cache throws an error due to a step that does not exist anymore.
What can I do?
Thanks a lot
Regards Mario

Hello,
I am still getting the error . Plz suggest.
D:\psoft\PT8.52\setup>CBLBLD.BAT C: C:\TEMP
ASCII Cobol Compilations Proceeding
Creating Directory C:C:\TEMP
The filename, directory name, or volume label syntax is incorrect.
The filename, directory name, or volume label syntax is incorrect.
ERROR! Could not create compile directory(C:\TEMP)!
D:\psoft\PT8.52\setup>

TFS 2012 Test Agent keep alternating status Online/Disconnected

TFS 2012 environment
Test Controller and Agent Update 3.
We are using a shadow account to connect the Agent (not on domain) to the Controller (on domain).
The problem I'm having is that the Test Agent Status alternates constantly between Online and Disconnected.
I have all TCP and UDP ports open in the Firewall on the Agent and Controller (can't just turn it off because of policy settings).
I have created an environment in Lab Center and can kick off a Lab Template based build definition to execute an automated test. The process get to a point of wait for the the test environment to be ready, starts a test execution, and completes the
test run with a Warning: "An error occurred while communicating with Agent vstfs:///LabManagement/TestMachine/###", where ### is a three digit number.
If I just sit and watch the Test Agent status, with no test runs running, the status will show Online for about 10-15 seconds and then show Disconnected for about 30-60 seconds. And then it repeats.
Another thing to mention, the Test Controller for this effort was cloned from a previous Test Controller that was used for another project. The previous Controller was on the domain at the time of being cloned and had issues of being the same computer
name on the network and then other issues because the Controller was already assigned to a collection. Another person here went through a process of fixing by uninstalling the controller software and then deleting some XML files that were left behind
after uninstalling the controller software. I feel that a new controller should be created from scratch because I feel that there is still some conflicts between the old and new Controllers.
Any assistance would be greatly appreciated.

I have additional information to supply to this thread for the benefit of others who may come across this issue.
The main issue of using the same version of Test Manager with the version of TFS you have running is the first part.
After this post, I added additional testing environments and virtual machines in SCVMM and started having the "Online/Disconnected" issue again. With more research, I figured out that I had to add the IP address and host name of
the Test Controller to the hosts file on the Test Agents (path to the
hosts file "C:\Windows\System32\drivers\etc\"). Just open this file in NotePad (or the editor of your choice) and add a line at the end with the IP and host name.
Example hosts file:
# Copyright (c) 1993-2009 Microsoft Corp.
# This is a sample HOSTS file used by Microsoft TCP/IP for Windows.
# This file contains the mappings of IP addresses to host names. Each
# entry should be kept on an individual line. The IP address should
# be placed in the first column followed by the corresponding host name.
# The IP address and the host name should be separated by at least one
# space.
# Additionally, comments (such as these) may be inserted on individual
# lines or following the machine name denoted by a '#' symbol.
# For example:
# 102.54.94.97 rhino.acme.com # source server
# 38.25.63.10 x.acme.com # x client host
# localhost name resolution is handled within DNS itself.
# 127.0.0.1 localhost
# ::1 localhost
123.456.78.9 computername.domain.com
I have used this several times and it has worked every time (so far) where I use shadow accounts in the TFS test environments. Hope this helps!

Install TFS 2012 Solution packages (WSP) on MOSS 2007 that already have TFS 2010 Solution package installed and deployed

Hi
I hope to place this question in the proper forum but if not, can someone move it to the right forum. Thanks
I have a MOSS 2007 farm and I have 2 TFS 2010 SharePoint extension solution package (WSP) installed and working properly for a while now.
Microsoft.TeamFoundation.SharePoint.Dashboards.wsp and Microsoft.TeamFoundation.SharePoint.wsp
The Application team is going to upgrade their TFS 2010 server to TFS 2012 and want me to installed the new TFS 2012 SharePoint WSP solution to our MOSS farm.
My Question is that do I have to uninstall TFS 2010 solution package first or can I installed the new TFS 2012 solution packages in addition and both TFS 2010 and TFS 2012 solution package will co-exist and will work properly?
the reason i want to do this is making sure all existing TFS 2010 will still work. My concern is if I have to uninstall TFS 2010 solution just to get TFS 2012 solution then run into problem with existing TFS 2010 projects.
Thanks in advance for any advice or insight on this.
Swanl
Swanl

Hi Swanl,
you may check on the prequisite in sharepoint products,
"SharePoint Products: If you have a portal server, you might have to upgrade it to continue using SharePoint integration. We no longer support Windows SharePoint Services 3.0 or Microsoft Office SharePoint Server 2007. See
SharePoint Products requirements for Team Foundation Server."
Supported versions, editions
SharePoint Foundation 2013¹
SharePoint Server 2013,¹ (Enterprise or Standard edition)
SharePoint Foundation 2010²
SharePoint Server 2010,² (Enterprise or Standard edition)
http://msdn.microsoft.com/en-us/library/hh667648.aspx
Regards,
Aries
Microsoft Online Community Support
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread.

TFS 2010 with Active Directory 2012 R2

Are there any known problems using TFS 2010 with Active Directory 2012 R2? Domain controllers are being updated from 2003 to 2012 R2, and the Domain/Forest mode will be set to AD DS Server 2012R2, value=6.
James Bristow, Software Configuration Manager

Hi James,
Thanks for your post.
Your AD 2012 R2 will running on your Windows Server 2012 R2 machine, right? Please note that: TFS 2010 not support Windows Server 2012 R2, so you cannot install TFS 2010 Server on this Windows Server 2012 R2 machine. Please refer to this document:
https://msdn.microsoft.com/en-us/library/dd578592.aspx.
As far as I know TFS 2010 works fine with AD 2012 R2, so you can install your TFS 2010 another machine and use this AD 2012 R2 Server.
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Renaming TFS Server name upon migration from TFS 2010 to TFS 2012

We are migrating from TFS 2010 on existing server to TFS 2012 on new server. All components (TFS 2012, SQL 2012, SPS 2010) are directly on the new server similar to existing server (TFS 2010, SQL 2008 R2, WSS 3.0).
The new server has a new name, however the service provider that does the actual migration,
wants to rename
the new server to be same name as the name of the original existing server when it is shutdown. The rename is intended to be done using
netdom utility.
I noticed there are articles by microsoft and others that describe various issues that may arrise as
result of TFS server rename. However service provider still plans to rename based on his field experience and best practices.
What do u recommend to do in this aspect ? Why would it be necessary to rename and not use the new name (DNS can map old name as well to the new IP) ? What are the actual risks in such rename and is it worth it ?
Thank u

Hi Cathy,
Thank u for your reply.
We know that renaming the new server to the same name as the original one, is
not a must for the migration to work. The issue in question is as follows :
1. A Microsoft partner that has hands on experience in TFS migration, and planned to migrate for us, recommends to rename the new server name, to the original server name, utilizing net_dom command, and to do it during / after same procedure u
provided link to.
2. We found Microsoft documentation that cautions about renaming the server, e.g. renaming SQL server which is in our case on same machine where TFS 2012 is to be installed. However, the partner urges us to rename, explaining that net_dom should perform
the rename safely without caution risk.
Kindly let u sknow if Micorsoft considers such rename with net_dom to be a good
practice in low risk for such migration,
or better keep the new server name as it is and just map the old server name in DNS to the IP of the new server.
Thank u.

Team Foundation Server 2010 and System Center 2012 SP1 Operations Manager WorkItem Synchronization fail

Hello,
We are currently implementing a Devops solution with SCOM 2012 SP1 and TFS 2010 SP1 and we would like to synchronize APM alerts with TFS and the Operational Issue WorkItem. However we are not
able to sync anything.
Here is our environments :
Products :
SCOM
System Center Operations Manager 2012 SP1
French
OS: Windows 2012 SP1 Std x64
French
DB: SCOM SQL Server 2012 SP1 x64
Management Pack
MP Operations Manager TFS Work Item Synchronisation 7.0.9538.0
MP Alert Attachement 7.0.9538.0 (We have also try the version in the VM DEVOPSALL : 7.0.9538.1005)
TFS
Team Foundation Server 2010 SP1
French 10.0.40219.1
OS: Windows 2008 R2 SP1 Std x64
French
DB: TFS SQL Server 2008 x64
TFS 2012 Object Model Installer (We have also try the version 2010)
Here is our configuration :
TFS Platform
This a French platform with a project based on the Process Template SCRUM 1.0 alone in a Team Project collection. The Operational Issue import completed successfully. It’s possible to manipulate
Operational Issue for all of its states from TFS.
SCOM Platform
We followed the documentation at :
http://technet.microsoft.com/en-us/library/jj883936.aspx
to configure SCOM Alert Attachment and Operation Manager Tfs Work Item Synchronization. Everything seems to be ok. All configurations succeed. We did not configure Intellitrace collector.
The problem occurs when we are trying to push an APM alert to TFS. When we assigned an alert to the Engineering nothing is synchronized in TFS. There is no error in the event viewer on the TFS
server. But, on the SCOM server we get 2 exceptions raised by Microsoft.EnterpriseManagement.Modules.Apm.TfsWISync.OMModules. We provide you the log of the SCOM Server in this mail.
Detailed exceptions :
Exception message are in French. In English it could be : OEF expected. The followed elements are not closed : Source, Link.
Microsoft.SystemCenter.TfsWISync.SyncAttachments.Rule
TFS Work Item Synchronisation ServerName
{EC924637-2725-7C94-8F37-013B657F4530}
Microsoft.EnterpriseManagement.Modules.Apm.TfsConnector.OMModules.ReadOpenAlertsModule
System.Xml.XmlException: Fin de fichier inattendue. Les éléments suivants ne sont pas fermés : Source, Link. Ligne 1, position 65537.
   à System.Xml.XmlTextReaderImpl.Throw(String res, String arg)
   à System.Xml.XmlTextReaderImpl.ParseElementContent()
   à System.Xml.XmlReader.ReadString()
   à System.Xml.XmlReader.ReadElementString(String name)
   à Microsoft.EnterpriseManagement.Modules.Apm.TfsConnector.Common.DataItems.Links.DeserializeInternal(XmlReader reader)
   à Microsoft.EnterpriseManagement.Modules.Apm.TfsConnector.Common.DataItems.Links.Deserialize(String mappings)
   à Microsoft.EnterpriseManagement.Modules.Apm.TfsConnector.OMModules.ReadOpenAlertsModule.InitializeConfiguration(XmlReader reader)
   à Microsoft.EnterpriseManagement.Modules.Apm.TfsConnector.OMModules.ReadOpenAlertsModule..ctor(ModuleHost`1 moduleHost, XmlReader configurationReader, Byte[] previousState)
Microsoft.SystemCenter.TfsWISync.SyncWorkItems.Rule
TFS Work Item Synchronisation ServerName
{EC924637-2725-7C94-8F37-013B657F4530}
Microsoft.EnterpriseManagement.Modules.Apm.TfsConnector.OMModules.ReadAlertsSyncModule
System.Xml.XmlException: Fin de fichier inattendue. Les éléments suivants ne sont pas fermés : Source, Link. Ligne 1, position 65537.
   à System.Xml.XmlTextReaderImpl.Throw(String res, String arg)
   à System.Xml.XmlTextReaderImpl.ParseElementContent()
   à System.Xml.XmlReader.ReadString()
   à System.Xml.XmlReader.ReadElementString(String name)
   à Microsoft.EnterpriseManagement.Modules.Apm.TfsConnector.Common.DataItems.Links.DeserializeInternal(XmlReader reader)
   à Microsoft.EnterpriseManagement.Modules.Apm.TfsConnector.Common.DataItems.Links.Deserialize(String mappings)
   à Microsoft.EnterpriseManagement.Modules.Apm.TfsConnector.OMModules.ReadAlertsSyncModule.InitializeConfiguration(XmlReader reader)
   à Microsoft.EnterpriseManagement.Modules.Apm.TfsConnector.OMModules.ReadAlertsSyncModule..ctor(ModuleHost`1 moduleHost, XmlReader configurationReader, Byte[] previousState)
According to you, is there a possible incompatibility of the synchronization system with French environments?
Thanks for your help.
Gregory OTT => http://twitter.com/gregory_ott
ALM Engineer at Tekigo => www.tekigo.com

Hi,
To monitor the complete TFS infrastructure, you need additional monitoring packs that alert you about a wide range of problems with TFS components. When you import the TFS Work Item Synchronization management pack, it is a best practice to
also import and configure these monitoring packs, you can double check these:
Monitoring Integration between Operations Manager and TFS in System Center 2012 SP1
http://technet.microsoft.com/en-us/library/jj899893.aspx
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

SQL Server 2008 R2 SP3 compatibility with TFS 2012?

Hi all,
I have a client who is planning on upgrading from SQL Server 2008 R2 SP2 to SQL Server 2008 R2 SP3 but wants to make sure that their installed Team Foundation Server 2012 databases will be ok?
I have found a Microsoft article saying that TFS 2012 support SQL Server 2008 R2 SP2 but nothing about SP3.
Thanks for your help!
Martyn

Hi Martyn,
According to this
article, Team Foundation Server 2012 (TFS 2012) requires SQL Server 2008 R2 SP1 or SQL Server 2012. From my point of view, it means that we need to run at least SQL Server 2008 R2 SP1 when using TFS 2012, and TFS 2012 can work with SQL Server 2008
R2 SP1 later version (contains SQL Server 2008 R2 SP2 and SQL Server 2008 R2 SP3).
In addition, we recommend you install the latest released service pack for your SQL Server, as service pack includes a number of important fixes that TFS could benefit from.
For TFS issues, for quick and accurate response, I would like to recommend that you ask the question in the Visual Studio Team Foundation Server forums at
https://social.msdn.microsoft.com/Forums/vstudio/en-US/home?category=vstfs . It is appropriate and more experts will assist you.
Thanks,
Lydia Zhang
If you have any feedback on our support, please click
here.

Connecting to existing TFS 2012 repository using SSDT 2012

I am trying to connect to an existing TFS 2012 repository using SSDT 2012 (Visual Studio 2010 Shell). I already have Visual Studio 2013 Professional Edition installed, but I am still not seeing any options other than "None" for the Plug-In Selection
dropdown in the Source Control part of the options menu.
Am I missing something in the SSDT documentation that explains how to do this?

I have attached the results of pressing the "Copy Info" button in the about section when I open SQL Server Data Tools at the bottom of this response.
I was able to fix the issue by installing Visual Studio 2010 Team Explorer.
Microsoft Visual Studio 2010
Version 10.0.40219.1 SP1Rel
Microsoft .NET Framework
Version 4.5.50938 SP1Rel
Installed Version: IDE Standard
Microsoft Visual Basic 2010   01011-532-2002361-70265
Microsoft Visual Basic 2010
Microsoft Visual C# 2010   01011-532-2002361-70265
Microsoft Visual C# 2010
Microsoft Visual Studio 2010 Team Explorer   01011-532-2002361-70265
Microsoft Visual Studio 2010 Team Explorer
Microsoft Visual Studio Tools for Applications 3.0   01011-532-2002361-70265
Microsoft Visual Studio Tools for Applications 3.0
Microsoft Visual Web Developer 2010   01011-532-2002361-70265
Microsoft Visual Web Developer 2010
SQL Server Analysis Services
Microsoft SQL Server Analysis Services Designer
Version 11.0.5058.0
SQL Server Integration Services
Microsoft SQL Server Integration Services Designer
Version 11.0.5058.0
SQL Server Reporting Services
Microsoft SQL Server Reporting Services Designers
Version 11.0.5058.0
Visual Studio 2010 Shell (Integrated) - ENU Service Pack 1 (KB983509)   KB983509
This service pack is for Visual Studio 2010 Shell (Integrated) - ENU.
If you later install a more recent service pack, this service pack will be uninstalled automatically.
For more information, visit http://support.microsoft.com/kb/983509.

TFS 2012 Scheduled Backups - Permission error

Hi All,
I am trying to configure auto backup using the Schedule Backups wizard. However, I get the below erros during the Readiness Checks step. I have check the SQL databases but couldn't figure out which one is having issue. Need some help. Thanks
[Info @20:37:34.839] +-+-+-+-+-| Running VerifySqlServerPermissionsGranted: Verifying TFS Job Agent has permissions to create and alter databases |+-+-+-+-+-
[Info @20:37:34.839]
[Info @20:37:34.839] +-+-+-+-+-| Verifying TFS Job Agent has permissions to create and alter databases |+-+-+-+-+-
[Info @20:37:34.839] Starting Node: ALTERCREATEDATABASE
[Info @20:37:34.839] NodePath : Container/Progress/ALTERCREATEDATABASE
[Info @20:37:34.846] Node returned: Error
[Error @20:37:34.846] User does not have permission to perform this action.
[Info @20:37:34.846] Completed VerifySqlServerPermissionsGranted: Error
[Info @20:37:34.846] -----------------------------------------------------

Hi Ultragc88,
Thanks for your post.
What’s the detailed version of your TFS 2012?
To create Backup plan, you must be a member of both of the following groups:
1
The Administrators security group on the server that is running the administration console for Team Foundation.
2
The SQL Server System Administrator security group. In addition, the service account for TFS (TFSService) must have
SQL Server Perform Back Up and Create Maintenance Plan permissions set to
Allow on each instance of SQL Server that hosts the databases that you want to back up.
3
The Farm Administrators group in SharePoint Foundation 2010, or an account with the permissions required to back up the farm.
If you ensure you have the above permissions correctly, but still occur the same error, please share the full backup plan creating log here.
For more information about create TFS 2012 backup plan, please refer to this document:
http://msdn.microsoft.com/en-us/library/vstudio/hh561429.aspx.
John Qiao [MSFT]
<THE CONTENT IS PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND, WHETHER EXPRESS OR IMPLIED>
Thanks
MSDN Community Support
Please remember to "Mark as Answer" the responses that resolved your issue. It is a common way to recognize those who have helped you, and makes it easier for other visitors to find the resolution later.

"Invalid access code (Bad parameter)" error encountered when trying to import VSS DB into TFS 2012

I'm trying to import a VSS DB into TFS 2012 using the VSS Upgrade Wizard.
However, I'm getting an "Invalid access code (Bad parameter)" error when I click the "List Available Projects" link button.
I have been able to get the wizard going with a different VSS DB, but not this one.
How can I fix this and get the import going?

Hi,
Thank you for your post.
Do you use OLE Automation objects when you log on VSS? Please refer to this
FIX: VSS OLE Automation Error Message "Bad Access Parameter"
Regards,
Lily Wu
MSDN Community Support | Feedback to us
Develop and promote your apps in Windows Store
Please remember to mark the replies as answers if they help and unmark them if they provide no help.

TFS 2012 scrum board across projects

So we have recently upgraded to tfs 2012. I have a query that I can see in team explorer across projects. Our sprint query has Team Project In @Project, OtherProjectName. In team explorer, this works fine. But when I go to the query in the web interface
and/or the board, it only shows the work items from @Project. I really, really, really love the board. It prevents me from using the stupid scrum power tools to cut up story and task cards for our manual board. I hope this is something that I can make work!
Anyone?
Stephanie

Hi Stephanie,
Thanks for your post.
For this scenario, please submit it to User Voice site at: http://visualstudio.uservoice.com/forums/121579-visual-studio. Microsoft engineers will evaluate it
seriously.
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Upgraded TFS 2010 SP1 to TFS 2012 but "Test-SPContentDatabase" throws error while upgrading SP2010 to SP2013

Similar Messages

Maybe you are looking for