Upgraded to SP 2013 - Scope Rules are empty

Hi,
We upgraded to SP 2013 enterprise from sharepoint 2010 and this involved upgrading the search admin database as well.
I believe search scopes that was migrated from SP 2010 are available as read-only but the item count in rule shows error. I have run full crawl and there are items in the index but my custom search scopes are failing because the rules has no items.
Is this a known issue in SP 2010 to SP 2013 migration of search service?
Regards,
Manoj
"The opinions expressed here represent my own and not those of anybody else"

Thank you for the reply.
I understand scopes are not supported in 2013 but they are available if your site is in 2010 mode and our sites are upgraded and all are in 2010 mode on our 2013 farm. But I believe scopes that existed in the migrated sites would work if you keep them in
2010 mode in the 2013 farm?
Update: I observed that this happens when we have content types in rules and that too not oob content types but the ones we created by deriving from oob content types. There is no custom coding involved in these just that we had content type we created,
for example, for project type documents. If I create a custom scope on my site in 2013 farm which is in 2010 mode it shows item count in the scope and I have added a rule to a custom library. But if I edit that scope and add a rule to include my content type
the item count is error and total count also shows error!
Regards,
Manoj
"The opinions expressed here represent my own and not those of anybody else"

Similar Messages

After upgrade to outlook 2013 Contacts have the default picture in reading pane

I'm using Windows 8 on a domain (using a domain account not a Microsoft account) connecting to Exchange, all my Contacts were outlook contacts with pictures and other data, I could see the picture of the contact in the reading pane and people pane while
using Outlook 2010.
After the upgrade to Outlook 2013 the contacts are not lost (I can see them in the People Hub) but it appears that they are unavailable in the reading pane because all I can see is the default picture (the default picture picture is also visible in the notifications).
If I put the mouse over the name of the people while in the reading pane all I can see is the card with the default info (the only data visible is that the contact is available in the next 8 hours), if I compose a new message and hover the name of the contact
i can see the card with all the data (picture, company, etc.).
Is this the default behavior in Outlook 2013 if you are in a domain and not connected to any service or there is a way to show the picture of my contacts in every part of outlook?

No, it should be available still. Did you recreate this mail profile after the upgrade?
Try forcing a complete update of the Office Line Address Book via the Send/Receive tab-> Send/Receive Groups-> Download Address Book
Otherwise, reset the OAB by renaming your oab-file to .old when Outlook is closed. You'll find them here:
C:\Users\%username%\AppData\Local\Microsoft\Outlook\Offline Address Books\<Account GUID>
Robert Sparnaaij
[MVP-Outlook]
Outlook guides and more: HowTo-Outlook.com
Outlook Quick Tips: MSOutlook.info

Mail rules question on subject and sender fields are empty

I am getting blank messages delivered to my mailbox and the subject and or sender's name are empty, how do I set up a rule to just delete them?

You know, the messages might not actually be blank. I've been steadily getting more and more coming in blank what when I view the source, the messages is there but Mail isn't displaying it. I'm still trying to find some fix for this, but thought you might like to know before you delete them all.

In iMovie, all my files are empty after upgrade. How can I find them?

I went into iMovie today to look at some old videos and notice mostly all my files are empty. I'm not sure how long its been this way, but it seems like it happened over the summer sometime. I only have files from June to the present. Where can I find them?
I tried to read up on others with similar problems and tried some of the suggestions, but no luck.

In the Event mode you an sort the events this way:
In the Photos mode (without Event titles displayed) the photos can be sorted this way:
For organizing your photos this post by Terence Devlin is has some excellent suggestions: Better way to organize my images?: Apple Support Communities.
OT

HELP! Upgrades to Office 2013 and Outlook has lost almost everything!!!!!

I really messed up. I bought an upgrade to Office 2013 and installed it. I had Office 2010. I thought, wrongly, that Microsoft would set up 2013 to use my email account and import my emails and contacts. The results have been disastrous.
I use a Gmail account and have Outlook connected by IMAP to Gmail. I do not have Exchange or POP3. I have Some but not all, probably not even most, of my old emails. I have a lot of empty folders that used to have emails. My
IMAP account to Gmail did get imported, and it tests OK and I have two test messages that appear to work, but no new emails have come through. I checked, there are plenty of new emails in GMail but they have not come through despite several send/receives.
Nothing. Except the two test emails. I don't get this. Can anyone help?
I also did not get any of my contacts. This really sucks.

Sorry for the inconvenience caused. We'll try to fix the problem.
Where did you store your old emails? Did you store them in a local pst file or on the server? If you store the emails on the server, please log into your web mail and check if you can see your old emails.
In addition, we can try to create a new mail profile in Control Panel and configure your Gmail account in the new mail profile to check the result. For your information:
To create a new profile:
http://office.microsoft.com/en-in/outlook-help/create-an-outlook-profile-HA102749460.aspx?CTT=1
Configure Gmail Accounts in Outlook:
http://www.slipstick.com/outlook/sync-outlook/synchronizing-outlook-google-accounts/
Hope this helps.
Regards,
Steve Fan
Forum Support
Come back and mark the replies as answers if they help and unmark them if they provide no help.
If you have any feedback on our support, please click
here

Can't change the master page after upgrading to SharePoint 2013.

After upgrading our farm to SharePoint 2013 we are having trouble changing the master page for sites that don't have sub-sites. We are still using the v4 UI version, and that appears to be what is causing the problem. The error we get when going to /_layouts/ChangeSiteMasterPage.aspx
is:
System.NullReferenceException: Object reference not set to an instance of an object. at Microsoft.SharePoint.Publishing.Internal.CodeBehind.AreaChromeSettingsPage.OnLoad(EventArgs e) at System.Web.UI.Control.LoadRecursive()
at System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint)
I took a peek at the source code for AreaChromeSettingsPage.OnLoad and found that it references a CheckBox control that does not exist in the v4 ChangeSiteMasterPage.aspx:
protected override void OnLoad(EventArgs e)
base.OnLoad(e);
this.EnsureChildControls();
if (!this.Page.IsPostBack)
this.LoadValues();
if (base.Web.Webs.Count == 0)
this.resetSystemMasterPageSubSitesCheckBox.Visible = false;
this.resetSubSitesCheckBox.Visible = false;
this.resetAlternateCssSubSitesCheckBox.Visible = false;
this.resetThemeSubSitesCheckBox.Visible = false;
base.ConfigureCancelButton(this.BtnCancel);
If I manually add a checkbox control with the ID "resetThemeSubSitesCheckBox" to a hidden panel in the v4 copy of ChangeSiteMasterPage.aspx the page works, but obviously this is not a best practice. How can we fix this without upgrading the UI version, which
we are not yet ready to do?

Thanks Mike - Could you please share what is your next step then? I also have custom master pages and layout but I am going to make new master page and layout in 2013 as we need to change the existing branding too. so, i upgrade the site collection. I understand
the Look and Feel will not persist after the upgrade but I am concern that at least the page should show the content on the page after the upgrade. The page had Calendar webppart on it but after the upgrade it is coming blank.
any suggestion?
Regards,
Khushi
Khushi

Upgrade 2010 to 2013 with SQL Reporting Services

I'm getting ready to upgrade to 2013.
When I run the Test-SPContentDatabase I get:
Category : MissingWebPart
Error : True
UpgradeBlocking : False
Message : WebPart class [ab6d9dad-e23c-ce4f-ff98-f6575a1ccf4c] (class [
Microsoft.ReportingServices.SharePoint.UI.WebParts.ReportView
erWebPart] from assembly
[Microsoft.ReportingServices.SharePoint.UI.WebParts,
Version=10.0.0.0, Culture=neutral,
PublicKeyToken=89845dcd8080cc91]) is referenced [24] times
in the database [is-sharepoint], but is not installed on the
current farm. Please install any feature/solution which
contains this web part.
Remedy : One or more web parts are referenced in the database
[is-sharepoint], but are not installed on the current farm.
Please install any feature or solution which contains these
web parts.
Locations :
Category : MissingAssembly
Error : True
UpgradeBlocking : False
Message : Assembly
[Microsoft.ReportingServices.SharePoint.UI.ServerPages,
Version=10.50.0.0, Culture=neutral,
PublicKeyToken=89845dcd8080cc91] is referenced in the
database [is-sharepoint], but is not installed on the
current farm. Please install any feature/solution which
contains this assembly.
Remedy : One or more assemblies are referenced in the database
[is-sharepoint], but are not installed on the current farm.
Please install any feature or solution which contains these
assemblies.
Locations :
Category : Configuration
Error : False
UpgradeBlocking : False
Message : The [is.photomask.com] web application is configured with
claims authentication mode however the content database you
are trying to attach is intended to be used against a
windows classic authentication mode.
Remedy : There is an inconsistency between the authentication mode of
target web application and the source web application.
Ensure that the authentication mode setting in upgraded web
application is the same as what you had in previous
SharePoint 2010 web application. Refer to the link
"http://go.microsoft.com/fwlink/?LinkId=236865" for more
information.
Locations :
The first two have to do with reporting services. I'm trying to workout how to go about getting these errors to go away. I don't want to remove SQL reporting or migrate a broken site and fix it later. FYI it does migrate but reporting services
is of course broken.
So what I was wanting to do was to upgrade SQL Reporting Services for SharePoint 2010 from 2008 SQL to 2014 SQL first. This would be in the hopes that it would make the migration to SharePoint 2013 work as the assemblies would change to the proper
version.
Can anyone elaborate on my upgrade path?
I'm still looking up the "Claims Based" authentication thing. I've found an article on how to migrate it so not a big deal. I do wonder however if this is tied to the issue I saw with default.aspx and home.aspx being denied to all users
after I did migrate a content db.
David Jenkins

Hi David,
The following sections describe the basic steps needed to upgrade or migrate from 2008 versions of Reporting Services SharePoint mode to 2014 version.
SQL Server 2008 R2 to SQL Server 2014
Starting environment: SQL Server 2008 R2, SharePoint 2010.
Ending environment: SQL Server 2014, SharePoint 2010.
In-place upgrade is supported and there is no down time for your SharePoint environment.
Install the SQL Server 2014 version of the Reporting Services add-in for SharePoint on each web front-end in the farm. You can install the add-in by using the SQL Server 2014 installation wizard or by downloading the add-in.
Run SQL Server 2014 installation to upgrade SharePoint mode for each “report server”. The SQL Server installation wizard will install the Reporting Services Service and create a new Service application.
If you also want the ending environment to run SharePoint 2013, you need to complete a database-attach upgrade of the SharePoint 2010 to SharePoint 2013.
For more scenarios information, please refer to:
http://msdn.microsoft.com/en-us/library/ms143747.aspx#bkmk_sharePoint_scenarios
Per the supported combinations of SharePoint and Reported Services Components, I’d recommend you firstly upgrade Reporting Services to 2014, then upgrade SharePoint to 2013.
For more information:
http://msdn.microsoft.com/en-us/library/gg492257.aspx
The link below is the reference for migrating a Reporting Services:
http://msdn.microsoft.com/en-us/library/hh759331.aspx
Regards,
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected] .
Rebecca Tu
TechNet Community Support

Since upgrading to LabVIEW 2013, every VI compiles every time I open it (including quick-drop).

Hi all. Since upgrading to LabVIEW 2013, every VI compiles every time I open it (including quick-drop). This really slows things down! Perhaps related, my system tells me I don't have permission/access to modify my LabVIEW ini. Has anyone seen similar, and/or any hints towards a solution?

Jeff-P wrote:
As a side note, LabVIEW.ini is a file that gets generated by LabVIEW when it is launched if the file does not exist. So if you are missing the 32-bit ini file, launch 32-bit LabVIEW and that file should be created.
I thought that the message: "Perhaps related, my system tells me I don't have permission/access to modify my LabVIEW ini" might indicate that the labview.ini file cannot even be created... strange...
LabVIEW Champion . Do more with less code and in less time .

After upgrading to Yosemite is my program folder empty

after upgrading to Yosemite is my program folder empty, while the programs are saved on my PC. But they are not discoverable in a folder. Who recognizes this problem and can help me?

If by program folder you are referring to the Applications folder, it should not be unless something went wrong with the upgrade.
You can restore it from your backup you made prior to the upgrade.

Mobile account rules are still being ignored!

We've been running Tiger server for a couple years in combination with mobile accounts for some years now, mostly without significant problems. Since the introduction with Leopard it started giving problems: all rules in the WGM mobile account setup are ignored, it simply syncs the COMPLETE home folder of all Leopard clients. We are a 'music for picture' company, clients have large iTunes libraries and their /Movie folders are also pretty filled up, so data management became really problematic.
I figured that upgrading to Leopard server would solve this problem, so I bought a copy and started testing on a spare Mini Mac. And to my surprise the problem is still there! Syncing a mobile account from a Tiger client is fine, all rules are followed but with Leopard clients the problem still remains.
So what does a proper system administrator do? It starts collecting information from the internet and asks colleagues in the field what their experience is. It comes down (after a few days of research and testing) that I can't find the solution!
My test system:
Mini Mac with Leopard server 10.5.6
Macbook with Leopard client 10.5.6 as a test machine
iMac with Tiger 10.4.11 as test machine
- I create a user in WGM
- I create a group in WGM and give it the proper preferences for syncing
- I assign the user to the group
- I make myself a cup of tea and take a deep breath
- login as the new user and start testing
What I've tried so far to solve it:
- turned around the 'what-to-sync': instead of syncing the home folder (~/) and make rules, I setup exactly what it should sync and no rules. Didn't work, still syncs complete home folder
- delete sync prefs on client machine (/Library/Managed Preferences and .FileSync in home/network folder) restart and login again
- instead of Full Path rules, I've tried to use 'Name' and others. Same problem.
- went to WGM --> Group --> Preferences --> Details and added System/Library/CoreServices/ManagedClient. Edited the com.apple.homeSync so it should work. It didn't.
- started all over again, didn't work.
It still syncs the complete home folder and does not listen to any rule whatsoever. Is there anyone that has any idea what can solve this? Where about to upgrade to a new server with Leopard and I need the mobile accounts for my clients.
Thnx!
Aux

I usually enable this on Computer Groups or the Guest Computer account rather than via workgroups. I don't know if that somehow makes a difference. May be worth switching to this to see if the problems miraculously go away.
Have you enabled the server-side tracking feature in Leopard Server?
You can run the following command for diagnostic purposes:
mcxquery -o <path to where you want it to go>/mcx_export.txt -format xml -user <username> -group <groupname>
You can look at that to see if the Server is doing its job of delivering the MCX correctly to the client for the user and group.

IPhoto asked to upgrade library and has now come up empty even though my iPhoto file is over 130GB. How do I get back my photos?

iPhoto asked to upgrade library and has now come up empty even though my iPhoto file is over 130GB. How do I get back my photos? I am using OS X Yosemite 10.10.1 with Mavericks. My iPhoto is 9.6. I am very concerned as this file has all my photos for the last 15 years!

If the iPhoto Library is still 130 GB large, your photos are probably still inside; perhaps the library has a corruption.
Or the iPhoto Library is on drive, that is incompatible with iPhoto. Where is your iPhoto Library stored?
To check for a library corruption: Ctrl-click or right-click the iPhoto library and select "Show Package Contents". This will show the folders inside the library package.
Are there folders called "Masters" or "Old Masters"?
If there is a folder "Old Masters", you are having a problem with recent bug, that corrupts iPhoto Libraries when upgrading. In that case, it would be best to restore your iPhoto Library from a backup you made before you upgraded to Yosemite.
Or, if no backup is available, copy the "old Masters" folder to a folder on your Desktop and create a new iPhoto library and import the Old Masters folder.
If there is no folder "old Masters" try to rebuild your iPhoto Library with the First Aid tools :
Make a backup copy of your iPhoto Library, but don't overwrite any older backups.
To launch the "First Aid Tools" hold down the options-command keys ⌥⌘ while double clicking your iPhoto Library.
Keep the keys held down firmly until the First Aid panel appears.
Select "Rebuild Database".

Since upgrade to MDT 2013, can't capture Windows 7 image.

Hi fellas,
I use Virtual Box to create a 32- and 64-bit reference Windows 7 VM, which I then capture using an MDT Sysprep & Capture TS. This worked without a hitch using MDT 2012.
I recently upgraded to MDT 2013. Since then, after the VM syspreps and reboots, I get a boot manager error saying Windows failed to start. Status: 0xc0000260.
Not sure where to look for any logs. What I've done so far:
- Upgraded to latest version of Virtual Box (4.3.18)
- Rebuilt both VMs from scratch.
- Deleted and recreated the deployment share and Sysprep & Capture task sequences.
Stumped for the time being, although I could always just boot to my Win PE disc and manually capture with imagex. But c'mon.

Thanks for your input, but this is indeed a configuration issue, and it makes sense.
Vbox VMs are configured according to the guest OS installed on them. For my Windows 7 x64 VM, it's configured of course to run as Windows 7 x64. In the MDT 2012 environment, the Windows PE version
was 3.0, which is based on Windows 7, and hence the VM could boot to it since it was configured for it.
But MDT 2013 uses PE 5.0, based on 8.1. The VM crashes or throws an error when trying to boot the PE 5.0 boot image. I went into the VM's settings and changed the Guest OS to 8.1 x64, and it booted successfully to Windows PE and captured the
image according to the Sysprep & Capture sequence.
Sorry for the wild goose chase fellas. This should've been the first thing I checked.

VS 2010 Silverlight project upgraded to VS 2013 - not hitting break point.

dear Readers,
thank you for taking the time to read this posting.
we had developed a SL project using VS 2010 and it was successfully upgraded to vs 2013. after a couple of hiccups, the application compiled and ran successfully. the SL app is still in .net framework 4.0.
due to some changes, we wanted to debug the application. Even after marking a couple of break points, we found that vs 2013 did not hit the breakpoints when we ran the app with F5.
We tried the following and it still would not hit the breakpoint:
1. deleted the /bin and /obj directories in SL and .Web projects.
2. deleted .xap file and /bin /obj directories.
We tried attaching/detaching the sl process in Firefox. IE, and chrome - no luck.
any suggestions will be appreciated.
regards
ravi.
Sr GIS App Developer Dallas Fort Worth area, TX

Hi,
Please check the upgrade report details.
Besides, below articles will help you when you upgarde your silverlight application.
https://msdn.microsoft.com/en-us/library/hh397894(v=VS.95).aspx
https://social.msdn.microsoft.com/Forums/silverlight/en-US/475d7dca-eebf-4d50-87f8-957f6415fb63/how-to-upgrade-a-silverlight-4-application-to-silverlight-5?forum=silverlightgen
Best Regards,
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

How to remove the "0" from the sum cell when the other cells are empty?

Hello!
When I use the formula to sum the values from a few cells, there is a zero in the sum cell when the other cells are empty.
My question concerns how to remove the 0 from the sum cell when the cells that will be summed are empty.
Thank you!
/Johan Strömbeck

Hi,
Please try the Mr. Laurence's suggestion first. Then, we may try the other workarounds.
1) Go to Excel option> Advanced>Display Option for this worksheet> Uncheck Show a zero in cells that have zero value
2) Go to Conditional Formatting>New Rule>Format only cells that contain> Value equal to 0> Format the color with white
Hope it's helpful.
Regards,
George Zhao
TechNet Community Support

SharePoint Workspace 2010 still installed after upgrade to Office 2013

I'm working on a deployment of Office 2013 in a corporate environment. Using the OCT, I've customized a package which is working well on machines that don't have previous version of Office installed. However, many of the existing machines currently
have Office 2010. After executing the Office 2013 package, we're noticing that while the upgrade works, SharePoint Workspace 2010 and the Office 2010 Tools still exist in the Start -> Programs menu. I also see Office 2010 in Add/Remove programs
(along with the new Office 2013). The OCT is specifically set to uninstall previous editions of Office during the upgrade (which is the default behavior).
I'll seen a couple of other posts like this on the forum, but unfortunately no answers. How can I *completely* uninstall Office 2010 (including SharePoint Workspace 2010 and the Office 2010 tools) during the upgrade to Office 2013? This
corporation doesn't need SharePoint Workspace 2010; my guess is that it was included by default with the Office 2010 package that they rolled out in the past.
Thanks!

Hi,
By default, the uninstall option in Office Customization Tool (OCT) will not remove SharePoint Workspace 2010 as SharePoint Workspace is no longer include in Office 2013.
Try to create a separate Office 2010 .msp file, set Microsoft SharePoint Workspace and Office Tools to "Not Available" and deploy it
prior to the installation of Office 2013.
Or you can do an Uninstall upgrade. Basically, use the /uninstall [ProductID] command-line option to uninstall Office 2010 from the user's computer first and then after that is finished, install Office 2013.
Here is a great example of how to perform an uninstall-upgrade for enterprise deployments :
http://blogs.technet.com/b/odsupport/archive/2011/04/06/how-to-perform-an-uninstall-upgrade-to-office-2010.aspx (Note, the steps are wrriten for Office 2010, but it holds good for Office 2013.)
More reference:
http://technet.microsoft.com/en-us/library/cc178956.aspx#BKMK_uninstall
http://technet.microsoft.com/en-us/library/ff602181.aspx
Hope this helps.
Thanks,
Ethan Hua CHN
Forum Support
Come back and mark the replies as answers if they help and unmark them if they provide no help.
If you have any feedback on our support, please click
here

Upgraded to SP 2013 - Scope Rules are empty

Similar Messages

Maybe you are looking for