Upgrading from 12.0.6 to 12.1...will Db ugrade also upgrade following??

I am upgrading Ebusines ssuite form 12.0.6 to 12.1
but for that there are hard pre requisites
Upgrade OracleAS 10g Release 3 (10.1.3) to Patchset 4 (10.1.3.4) (Required)
Upgrade OracleAS 10g Release (10.1.2) for Forms and Reports to Patchset 3 (10.1.2.3) (Required)
Upgrade Oracle E-Business Suite Release 12 JDK to Java 6.0 latest update (Required)
If i upgrade the database to 10.2.0.40 from 10.2.0.2.0, will this also update the AS,form&reports and Java
or will i have to update each one seperately
Please advice and let me know
thanks
Muhammed

Hi,
If i upgrade the database to 10.2.0.40 from 10.2.0.2.0, will this also update the AS,form&reports and Java
or will i have to update each one seperately
Please advice and let me knowYou will have to upgrade each component separately.
Regards,
Hussein

Similar Messages

  • I would like to upgrade from Lightroom 3 to Lightroom 5.  Will I loose all my presets?

    I would like to upgrade from Lightroom 3 to Lightroom 5.  Will I loose all my presets that I have purchased and created? 

    elizcarrie wrote:
    I would like to upgrade from Lightroom 3 to Lightroom 5.  Will I loose all my presets that I have purchased and created? 
    When you install Lightroom 5, all of your presets (Develop module, metadata, print, etc…) will all get moved over to Lightroom 5 automatically.
    You may want to search the forums about presets from LR 3 (PV2010) and PV2012, a place to start is http://forums.adobe.com/message/4224108 as there are major differences between the Process Versions.

  • I upgraded from PS5 to PS 6 and Bridge will not open in RAW, AMT Failure, also will let me update

    I upgraded from PS5 to PS 6 and Bridge will not open in RAW, AMT Failure, also will not let me update and closes Bridge down.
    I have uninstalled and reinstalled 3 times and still no success. Any suggestions?

    What system are you on? Did you run the Creative Suite Cleaner Tool inbetween your install attempts? If not, try that to produce a "clean" install with factory defaults. Other than that there could be some specific system issues at play, but again, we'd need to actually know what system you are on...
    Mylenium

  • When upgrading from osx 10.7.4 to osx mountain lion I get the following Alert!  This update requires OS X version 10.8.

    When upgrading from osx 10.7.4 to osx mountain lion I get the following Alert!  This update requires OS X version 10.8.

    Sounds like you downloaded the 10.8.1 update instead of the Mountain Lion installer from the Mac App Store.
    You have to purchase Mountain Lion from the App Store to get to 10.8

  • Upgrading from Adobe Premiere Elements 10 to 13  will my working projects be deleted?

    I am considering upgrading from Adobe Elements 10 to 13.  Will I delete all my movies and projects I am working on now in Premiere 10?  Will it save everything I have already finished?  How does this work with an UPGRADE?  Thank you.

    joni sea
    What computer operating system is involved? For now, I will assume Windows 7, 8, or 8.1 64 bit. Premiere Elements 13 does not support Windows XP, Windows Vista, or Mac OSX 10.7.
    On your current computer, Premiere Elements 10 project files should still be saved to their hard drive save location. If you move any of the source media that went into those project after the save close, then you are going to have media disconnect issues. If applicable, consider File Menu/Project Archiver/Archive Project or Copy Project options.
    https://helpx.adobe.com/premiere-elements/using/archiving-projects.html
    Premiere Elements 10 and 13 are standalone products. When you go to 13, you do not convert 10 components into 13. "Upgrade" is an Adobe term
    related to pricing depending on what earlier version of the program you have.
    There is no guarantee that a project created in an earlier version will open in a latest version of the program. Probably will, but no guarantee.
    And, once you edit a project created in an earlier version in a later version, you cannot go back to the earlier version to edit the project just edited
    in the later version. So, best make a copy of the 10 project file, and use the copy to open in the later version.
    Let us start here. Any questions or need clarification on the above, please do not hesitate to ask.
    Thank you.
    ATR

  • R12.1.1 upgrade from 11.5.10.2 - Can remove 11i file system before upgrade?

    I am looking at doing the R12.1.1 upgrade on our 11.5.10.2 production system, I have done the upgrade in our Test enviornment already. Our production system has less disk space on the path with the current 11i system that will be the same location as the upgraded R12 filesystem.
    Is it ok/possible to backup the 11i structure to another path prior to the R12 upgrade or does the R12 upgrade installer need the 11i file structure to be in place while upgrading?
    Thank you for your help.

    I am looking at doing the R12.1.1 upgrade on our 11.5.10.2 production system, I have done the upgrade in our Test enviornment already. Our production system has less disk space on the path with the current 11i system that will be the same location as the upgraded R12 filesystem.
    Is it ok/possible to backup the 11i structure to another path prior to the R12 upgrade It is OK/Possible.
    Oracle E-Business Suite Upgrades and Platform Migration [ID 1377213.1] -- "11i to R12 Upgrade " section.
    or does the R12 upgrade installer need the 11i file structure to be in place while upgrading?No, you just need to copy the custom files you have from 11i APPL_TOP to R12 APPL_TOP
    Thanks,
    Hussein

  • When I upgrade from OS10.5.8 to Snow Leopard will all my data transfer.  If I need to back up what is the best way to do this?

    I plan to upgrade from OS10.5.8 to Snow Leopard. Will all my data, applications and settings transfer automatically?
    If I need to back up what is the best way to do this?

    If everything works perfectly, your data should not be touched.
    Personally I never trust my data to everything working perfectly.
    I always backup everything twice at least.

  • Upgrade from 4.6C to ECC-6 Points will be awarded.

    Dear Guys
    Can any body provide me documentation for the preparation of upgrade from 4.6C to ECC-6.We have done many modification in standard system and exits how can we upgrade those in ECC6.
    Thanks

    https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/9cfdd546-0d01-0010-6688-ba8ddc48edc9
    https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/7436ba46-0d01-0010-dca3-c03c34be2c3c
    https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/82c445c2-0d01-0010-4ab2-fc7e1a25bea2
    https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/5bd723c2-0d01-0010-97a5-cb14fe7f2810
    http://help.sap.com/saphelp_nw2004s/helpdata/en/62/3f2cadb35311d5993800508b6b8b11/frameset.htm
    Regards,
    RIch Heilman

  • Upgrade from Oracle 11.5.3 to Oracle 11.5.8 HRMS Upgrade

    HI,
    Can someone please help me know the patches and pre- requisites for an HRMS upgrade from Oracle 11.5.3 to Oracle 11.5.8.
    Would appreciate the help.
    regards
    Viraat

    Can tell me also, I have the same task to do. [email protected]

  • How do I upgrade from 7.7 to 8.0 - Can't see in available upgrades S370

    How do you upgrade an Ironport S370 to version 8.x ?
    We have been advised to update ours to version 8.x however I cannot see anyway of doing this as it's not in avaialable updates the latest we can see is 7.7.0-761 which we are now running.
    I've looked everywhere but can find little information on how to do it.
    Thanks in advance for any help.

    Call TAC, ask to be provisioned.  8.x is still "FCS" (First Customer Ship), not "GA" (General Availability) so you have to request it.

  • Upgrading from Vista 34bit to Windows 7 64 bit and want to upgrade Photo/Premier from 10 to 13.  What do I do first, next and last to not loose existing cataloges and DVD projects?

    I have bought a New Computer w/Windows 7 and want to update Adobe Premiere/{Photoshop from 10 Vista to 13 Windows 7.  What do I do first?  Do I update on old computer under Vista or new computer under Windows 7? Also, I do not want complications accessing completed projects made in Vista or rebuild catalogs in Photoshop.

    I have bought a New Computer w/Windows 7 and want to update Adobe Premiere/{Photoshop from 10 Vista to 13 Windows 7.  What do I do first?  Do I update on old computer under Vista or new computer under Windows 7? Also, I do not want complications accessing completed projects made in Vista or rebuild catalogs in Photoshop.

  • I have a 6 year old computer with 512MB of RAM and I am worried that if I upgrade from 3.6 to 8.0 Firefox will be too slow.

    Should I keep using 3.6 for as long as possible? I have been very happy with Firefox 3.6. I have a Compaq Presario computer.

    My opinion is to get more RAM. I found 512MB to be too little for Firefox '''3''', and I rarely have multiple windows open and rarely more that 10 tabs open.
    Try Firefox Portable first, and then if the Portable works to your satisfaction think about about upgrading to 8.0. Firefox Portable won't mess with your current Firefox installation, it installs completely separate. <br />
    http://portableapps.com/apps/internet/firefox_portable
    As far as Firefox 3.6 goes, it will probably be around for another 5 months or so as a currently supported version, as far as security updates are concerned.

  • Upgrade from 4.7 to ECC 6.0: Will PCRs work on ECC 6.0 ?

    Hi All
    I am currently in a client that had developed full automated PCRs (Personnel Change Requests) in version 4.7, and they are upgrading to ECC 6.0. The client invested considerably to build all these sophisticated workflow enabled PCRs. I know that SAP recommends to use HR Processes and Forms in ECC 6.0, but this client may need to wait to convert the PCRs to HR Processes and Forms. So my question is:
    Will the PCRs work in ECC 6.0 ? Will SAP currently support them  ?
    Thanks,
    Javier

    Hi Javier,
    PCRs created in release 47 should work in release 6.0 as well.
    BR,
    Carlos.

  • Trying to upgrade from Elements 10 to 11 on mac will not install.

    Elements 10 works fine.
    downloaded upgrade for elements 11 both photoshop and premiere.  neither one will install.
    it startsm and fails and says to run adboe support advisor.  I have, it says no errors.
    please let me know how to correctly update and install elements 11 over elements 10
    thanks

    If the Adobe Support Advisor was unable to locate the error then please manually review your installation logs.  You can find details on how to accomplish this at Troubleshoot with install logs | CS5, CS5.5, CS6 - http://helpx.adobe.com/creative-suite/kb/troubleshoot-install-logs-cs5-cs5.html.

  • Upgrading from CS5.5 premium to CS6 standard - will I lose Dreamweaver?

    Hi
    I'm currently using CS5.5 Design Premium, which includes Dreamweaver, and am thinking of upgrading to CS6 Design Standard, which doesn't include Dreamweaver. What will happen to my copy of Dreamweaver when I upgrade to CS6 Design Standard?
    Thanks

    For details about pricing and upgrades, see http://adobe.ly/hOlNKR or contact Customer Service: http://www.adobe.com/support/contact

Maybe you are looking for

  • 1st generation time capsule won't act as base station.

    Yesterday I bought a used 1st generation Time Capsule (TC).  I expected that it would operate as a "base station" and replace my Airport Extreme Base Station (AEBS) (in addition to it's primary function of acting as a repository for Time Machine back

  • Unable to create a new cluster on our domain

    Hi there, I am having difficulties creating a new server 2012 R2 failover cluster in our domain.  We have a working 2008 R2 cluster that has been running fine for years now. I have tried on different hardward with single nodes and multiple nodes when

  • How to use SQWRL in JSP

    Hello everyone. I`m a newbie, not in JSP, but in ontologies. I made my OWL ontology. Now I want to create a jsp web interface on tomcat 6.0.20 in order able to apply SQWRL queries to my owl ontology. A simple java application works fine. When I use t

  • ISR drop-down lists with ZCI layout

    Hi, We are developing a custom ISR scenario on Netweaver 2004s SP11 and Adobe LiveCycle Designer 7.1. Our Interactive form has a drop-down list which is supposed to get prefilled. When we use the ZCI layout, the drop-down is not showing any values. I

  • Fresh install, random 100% drive usage and system wide lag.

    Hi there, i just fresh installed Win 8.1 after having the issue of a svchost thrashing 100% disk access for minutes at a time and lagging whole system inc mouse pointer to the point that apps and games start to crash and the issue has not gone away.